From 52638f71fcff9386fe64c83a18a129b122333fdf Mon Sep 17 00:00:00 2001 From: Andrew Lunn Date: Tue, 10 May 2016 23:27:22 +0200 Subject: [PATCH] dsa: Move gpio reset into switch driver Resetting the switch is something the driver does, not the framework. So move the parsing of this property into the driver. There are no in kernel users of this property, so moving it does not break anything. There is however a board which will make use of this property making its way into the kernel. Signed-off-by: Andrew Lunn Signed-off-by: David S. Miller --- .../devicetree/bindings/net/dsa/dsa.txt | 2 -- .../devicetree/bindings/net/dsa/marvell.txt | 8 ++++++++ drivers/net/dsa/mv88e6xxx.c | 14 +++++++++++++- drivers/net/dsa/mv88e6xxx.h | 7 +++++++ include/net/dsa.h | 8 -------- net/dsa/dsa.c | 16 ---------------- 6 files changed, 28 insertions(+), 27 deletions(-) diff --git a/Documentation/devicetree/bindings/net/dsa/dsa.txt b/Documentation/devicetree/bindings/net/dsa/dsa.txt index 5fdbbcdf8c4b..9f4807f90c31 100644 --- a/Documentation/devicetree/bindings/net/dsa/dsa.txt +++ b/Documentation/devicetree/bindings/net/dsa/dsa.txt @@ -31,8 +31,6 @@ A switch child node has the following optional property: switch. Must be set if the switch can not detect the presence and/or size of a connected EEPROM, otherwise optional. -- reset-gpios : phandle and specifier to a gpio line connected to - reset pin of the switch chip. A switch may have multiple "port" children nodes diff --git a/Documentation/devicetree/bindings/net/dsa/marvell.txt b/Documentation/devicetree/bindings/net/dsa/marvell.txt index cdd70cebdea7..7629189398aa 100644 --- a/Documentation/devicetree/bindings/net/dsa/marvell.txt +++ b/Documentation/devicetree/bindings/net/dsa/marvell.txt @@ -10,10 +10,17 @@ If you need a stable binding, use the old dsa.txt binding. Marvell Switches are MDIO devices. The following properties should be placed as a child node of an mdio device. +The properties described here are those specific to Marvell devices. +Additional required and optional properties can be found in dsa.txt. + Required properties: - compatible : Should be one of "marvell,mv88e6085", - reg : Address on the MII bus for the switch. +Optional properties: + +- reset-gpios : Should be a gpio specifier for a reset line + Example: mdio { @@ -23,5 +30,6 @@ Example: switch0: switch@0 { compatible = "marvell,mv88e6085"; reg = <0>; + reset-gpios = <&gpio5 1 GPIO_ACTIVE_LOW>; }; }; diff --git a/drivers/net/dsa/mv88e6xxx.c b/drivers/net/dsa/mv88e6xxx.c index ae1cb191a0e0..e7e07eb7091d 100644 --- a/drivers/net/dsa/mv88e6xxx.c +++ b/drivers/net/dsa/mv88e6xxx.c @@ -2582,7 +2582,7 @@ static int mv88e6xxx_switch_reset(struct mv88e6xxx_priv_state *ps) { bool ppu_active = mv88e6xxx_has(ps, MV88E6XXX_FLAG_PPU_ACTIVE); u16 is_reset = (ppu_active ? 0x8800 : 0xc800); - struct gpio_desc *gpiod = ps->ds->pd->reset; + struct gpio_desc *gpiod = ps->reset; unsigned long timeout; int ret; int i; @@ -3634,6 +3634,7 @@ int mv88e6xxx_probe(struct mdio_device *mdiodev) struct mv88e6xxx_priv_state *ps; int id, prod_num, rev; struct dsa_switch *ds; + int err; ds = devm_kzalloc(dev, sizeof(*ds) + sizeof(*ps), GFP_KERNEL); if (!ds) @@ -3663,6 +3664,17 @@ int mv88e6xxx_probe(struct mdio_device *mdiodev) if (!ps->info) return -ENODEV; + ps->reset = devm_gpiod_get(&mdiodev->dev, "reset", GPIOD_ASIS); + if (IS_ERR(ps->reset)) { + err = PTR_ERR(ps->reset); + if (err == -ENOENT) { + /* Optional, so not an error */ + ps->reset = NULL; + } else { + return err; + } + } + dev_set_drvdata(dev, ds); dev_info(dev, "switch 0x%x probed: %s, revision %u\n", diff --git a/drivers/net/dsa/mv88e6xxx.h b/drivers/net/dsa/mv88e6xxx.h index 5f09a4ea3cc5..9ef7673f0c61 100644 --- a/drivers/net/dsa/mv88e6xxx.h +++ b/drivers/net/dsa/mv88e6xxx.h @@ -12,6 +12,7 @@ #define __MV88E6XXX_H #include +#include #ifndef UINT64_MAX #define UINT64_MAX (u64)(~((u64)0)) @@ -595,6 +596,12 @@ struct mv88e6xxx_priv_state { DECLARE_BITMAP(port_state_update_mask, DSA_MAX_PORTS); struct work_struct bridge_work; + + /* A switch may have a GPIO line tied to its reset pin. Parse + * this from the device tree, and use it before performing + * switch soft reset. + */ + struct gpio_desc *reset; }; enum stat_type { diff --git a/include/net/dsa.h b/include/net/dsa.h index 8e86af87c84f..ecb52e265cc3 100644 --- a/include/net/dsa.h +++ b/include/net/dsa.h @@ -16,7 +16,6 @@ #include #include #include -#include #include #include #include @@ -65,13 +64,6 @@ struct dsa_chip_data { * NULL if there is only one switch chip. */ s8 *rtable; - - /* - * A switch may have a GPIO line tied to its reset pin. Parse - * this from the device tree, and use it before performing - * switch soft reset. - */ - struct gpio_desc *reset; }; struct dsa_platform_data { diff --git a/net/dsa/dsa.c b/net/dsa/dsa.c index d61ceed912be..df169811f26d 100644 --- a/net/dsa/dsa.c +++ b/net/dsa/dsa.c @@ -659,9 +659,6 @@ static int dsa_of_probe(struct device *dev) const char *port_name; int chip_index, port_index; const unsigned int *sw_addr, *port_reg; - int gpio; - enum of_gpio_flags of_flags; - unsigned long flags; u32 eeprom_len; int ret; @@ -740,19 +737,6 @@ static int dsa_of_probe(struct device *dev) put_device(cd->host_dev); cd->host_dev = &mdio_bus_switch->dev; } - gpio = of_get_named_gpio_flags(child, "reset-gpios", 0, - &of_flags); - if (gpio_is_valid(gpio)) { - flags = (of_flags == OF_GPIO_ACTIVE_LOW ? - GPIOF_ACTIVE_LOW : 0); - ret = devm_gpio_request_one(dev, gpio, flags, - "switch_reset"); - if (ret) - goto out_free_chip; - - cd->reset = gpio_to_desc(gpio); - gpiod_direction_output(cd->reset, 0); - } for_each_available_child_of_node(child, port) { port_reg = of_get_property(port, "reg", NULL); -- 2.20.1