From 510fcb0d331f314cd20d0067d56f29302846f47b Mon Sep 17 00:00:00 2001 From: Marko Katic Date: Thu, 25 Oct 2012 18:51:38 +0200 Subject: [PATCH] ARM: pxa/spitz_pm: Fix hang when resuming from STR Devices that use spitz_pm.c will fail to resume from STR (Suspend To Ram) when the charger plug is inserted or removed when a device is in STR mode. The culprit is a misconfigured gpio line - GPIO18. GPIO18 should be configured as a regular GPIO input but it gets configured as an alternate function GPIO18_RDY. And then later in postsuspend() it gets configured as a regular GPIO18 input line. Fix this by removing the GPIO18_RDY configuration so that GPIO18 only gets configured as a regular gpio input. Signed-off-by: Marko Katic Signed-off-by: Haojian Zhuang --- arch/arm/mach-pxa/spitz_pm.c | 8 ++------ 1 file changed, 2 insertions(+), 6 deletions(-) diff --git a/arch/arm/mach-pxa/spitz_pm.c b/arch/arm/mach-pxa/spitz_pm.c index 438f02fe122a..842596d4d31e 100644 --- a/arch/arm/mach-pxa/spitz_pm.c +++ b/arch/arm/mach-pxa/spitz_pm.c @@ -86,10 +86,7 @@ static void spitz_discharge1(int on) gpio_set_value(SPITZ_GPIO_LED_GREEN, on); } -static unsigned long gpio18_config[] = { - GPIO18_RDY, - GPIO18_GPIO, -}; +static unsigned long gpio18_config = GPIO18_GPIO; static void spitz_presuspend(void) { @@ -112,7 +109,7 @@ static void spitz_presuspend(void) PGSR3 &= ~SPITZ_GPIO_G3_STROBE_BIT; PGSR2 |= GPIO_bit(SPITZ_GPIO_KEY_STROBE0); - pxa2xx_mfp_config(&gpio18_config[0], 1); + pxa2xx_mfp_config(&gpio18_config, 1); gpio_request_one(18, GPIOF_OUT_INIT_HIGH, "Unknown"); gpio_free(18); @@ -131,7 +128,6 @@ static void spitz_presuspend(void) static void spitz_postsuspend(void) { - pxa2xx_mfp_config(&gpio18_config[1], 1); } static int spitz_should_wakeup(unsigned int resume_on_alarm) -- 2.20.1