From 4f48b7fc5ab6286ab4a9522928aa1acc163a4bf3 Mon Sep 17 00:00:00 2001 From: Alan M Butler Date: Mon, 20 Aug 2012 15:29:07 +0100 Subject: [PATCH] ARM: Kirkwood: Iomega ix2-200 DT support Add support for the Iomega ix2-200. Led's and buttons working as of kernel 3.6-rc2 the 3 lines in the network interface do seem to be required as removing either causes the network card to not be able to reach the network (at least on my device). Product page: http://go.iomega.com/en/products/network-storage-desktop/storcenter-network-storage-solution/network-hard-drive-ix2-200-cloud/?partner=4735#tech_specsItem_tab Signed-off-by: Alan M Butler Acked-by: Andrew Lunn Signed-off-by: Jason Cooper --- arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts | 105 ++++++++++++++++++ arch/arm/mach-kirkwood/Kconfig | 7 ++ arch/arm/mach-kirkwood/Makefile | 1 + arch/arm/mach-kirkwood/Makefile.boot | 1 + arch/arm/mach-kirkwood/board-dt.c | 4 + arch/arm/mach-kirkwood/board-iomega_ix2_200.c | 57 ++++++++++ arch/arm/mach-kirkwood/common.h | 6 + 7 files changed, 181 insertions(+) create mode 100644 arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts create mode 100644 arch/arm/mach-kirkwood/board-iomega_ix2_200.c diff --git a/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts b/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts new file mode 100644 index 000000000000..865aeec40a26 --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts @@ -0,0 +1,105 @@ +/dts-v1/; + +/include/ "kirkwood.dtsi" + +/ { + model = "Iomega StorCenter ix2-200"; + compatible = "iom,ix2-200", "marvell,kirkwood-88f6281", "marvell,kirkwood"; + + memory { + device_type = "memory"; + reg = <0x00000000 0x10000000>; + }; + + chosen { + bootargs = "console=ttyS0,115200n8 earlyprintk"; + }; + + ocp@f1000000 { + i2c@11000 { + status = "okay"; + + lm63: lm63@4c { + compatible = "national,lm63"; + reg = <0x4c>; + }; + }; + + serial@12000 { + clock-frequency = <200000000>; + status = "ok"; + }; + + nand@3000000 { + status = "okay"; + + partition@0 { + label = "u-boot"; + reg = <0x0000000 0x100000>; + read-only; + }; + + partition@a0000 { + label = "env"; + reg = <0xa0000 0x20000>; + read-only; + }; + + partition@100000 { + label = "uImage"; + reg = <0x100000 0x300000>; + }; + + partition@400000 { + label = "uInitrd"; + reg = <0x540000 0x1000000>; + }; + }; + sata@80000 { + status = "okay"; + nr-ports = <2>; + }; + + }; + gpio-leds { + compatible = "gpio-leds"; + + power_led { + label = "status:white:power_led"; + gpios = <&gpio0 16 0>; + linux,default-trigger = "default-on"; + }; + health_led1 { + label = "status:red:health_led"; + gpios = <&gpio1 5 0>; + }; + health_led2 { + label = "status:white:health_led"; + gpios = <&gpio1 4 0>; + }; + backup_led { + label = "status:blue:backup_led"; + gpios = <&gpio0 15 0>; + }; + }; + gpio-keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + Power { + label = "Power Button"; + linux,code = <116>; + gpios = <&gpio0 14 1>; + }; + Reset { + label = "Reset Button"; + linux,code = <0x198>; + gpios = <&gpio0 12 1>; + }; + OTB { + label = "OTB Button"; + linux,code = <133>; + gpios = <&gpio1 3 1>; + }; + }; +}; diff --git a/arch/arm/mach-kirkwood/Kconfig b/arch/arm/mach-kirkwood/Kconfig index ca5c15a4e626..76bc8473f1a1 100644 --- a/arch/arm/mach-kirkwood/Kconfig +++ b/arch/arm/mach-kirkwood/Kconfig @@ -109,6 +109,13 @@ config MACH_LSXL_DT Buffalo Linkstation LS-XHL & LS-CHLv2 devices, using Flattened Device Tree. +config MACH_IOMEGA_IX2_200_DT + bool "Iomega StorCenter ix2-200 (Flattened Device Tree)" + select ARCH_KIRKWOOD_DT + help + Say 'Y' here if you want your kernel to support the + Iomega StorCenter ix2-200 (Flattened Device Tree). + config MACH_TS219 bool "QNAP TS-110, TS-119, TS-119P+, TS-210, TS-219, TS-219P and TS-219P+ Turbo NAS" help diff --git a/arch/arm/mach-kirkwood/Makefile b/arch/arm/mach-kirkwood/Makefile index 055c85a1cc46..f5484dcca9fc 100644 --- a/arch/arm/mach-kirkwood/Makefile +++ b/arch/arm/mach-kirkwood/Makefile @@ -28,3 +28,4 @@ obj-$(CONFIG_MACH_IB62X0_DT) += board-ib62x0.o obj-$(CONFIG_MACH_TS219_DT) += board-ts219.o tsx1x-common.o obj-$(CONFIG_MACH_GOFLEXNET_DT) += board-goflexnet.o obj-$(CONFIG_MACH_LSXL_DT) += board-lsxl.o +obj-$(CONFIG_MACH_IOMEGA_IX2_200_DT) += board-iomega_ix2_200.o diff --git a/arch/arm/mach-kirkwood/Makefile.boot b/arch/arm/mach-kirkwood/Makefile.boot index a13299d758e1..32fe72630062 100644 --- a/arch/arm/mach-kirkwood/Makefile.boot +++ b/arch/arm/mach-kirkwood/Makefile.boot @@ -12,3 +12,4 @@ dtb-$(CONFIG_MACH_TS219_DT) += kirkwood-ts219-6282.dtb dtb-$(CONFIG_MACH_GOFLEXNET_DT) += kirkwood-goflexnet.dtb dtb-$(CONFIG_MACH_LSXL_DT) += kirkwood-lschlv2.dtb dtb-$(CONFIG_MACH_LSXL_DT) += kirkwood-lsxhl.dtb +dtb-$(CONFIG_MACH_IOMEGA_IX2_200_DT) += kirkwood-iomega_ix2_200.dtb diff --git a/arch/arm/mach-kirkwood/board-dt.c b/arch/arm/mach-kirkwood/board-dt.c index e4eb450de301..9b3ec175e40b 100644 --- a/arch/arm/mach-kirkwood/board-dt.c +++ b/arch/arm/mach-kirkwood/board-dt.c @@ -87,6 +87,9 @@ static void __init kirkwood_dt_init(void) if (of_machine_is_compatible("buffalo,lsxl")) lsxl_init(); + if (of_machine_is_compatible("iom,ix2-200")) + iomega_ix2_200_init(); + of_platform_populate(NULL, kirkwood_dt_match_table, kirkwood_auxdata_lookup, NULL); } @@ -100,6 +103,7 @@ static const char *kirkwood_dt_board_compat[] = { "qnap,ts219", "seagate,goflexnet", "buffalo,lsxl", + "iom,ix2-200", NULL }; diff --git a/arch/arm/mach-kirkwood/board-iomega_ix2_200.c b/arch/arm/mach-kirkwood/board-iomega_ix2_200.c new file mode 100644 index 000000000000..158fb97d0397 --- /dev/null +++ b/arch/arm/mach-kirkwood/board-iomega_ix2_200.c @@ -0,0 +1,57 @@ +/* + * arch/arm/mach-kirkwood/board-iomega_ix2_200.c + * + * Iomega StorCenter ix2-200 + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include +#include +#include +#include +#include +#include +#include "common.h" +#include "mpp.h" + +static struct mv643xx_eth_platform_data iomega_ix2_200_ge00_data = { + .phy_addr = MV643XX_ETH_PHY_NONE, + .speed = SPEED_1000, + .duplex = DUPLEX_FULL, +}; + +static unsigned int iomega_ix2_200_mpp_config[] __initdata = { + MPP12_GPIO, /* Reset Button */ + MPP14_GPIO, /* Power Button */ + MPP15_GPIO, /* Backup LED (blue) */ + MPP16_GPIO, /* Power LED (white) */ + MPP35_GPIO, /* OTB Button */ + MPP36_GPIO, /* Rebuild LED (white) */ + MPP37_GPIO, /* Health LED (red) */ + MPP38_GPIO, /* SATA LED brightness control 1 */ + MPP39_GPIO, /* SATA LED brightness control 2 */ + MPP40_GPIO, /* Backup LED brightness control 1 */ + MPP41_GPIO, /* Backup LED brightness control 2 */ + MPP42_GPIO, /* Power LED brightness control 1 */ + MPP43_GPIO, /* Power LED brightness control 2 */ + MPP44_GPIO, /* Health LED brightness control 1 */ + MPP45_GPIO, /* Health LED brightness control 2 */ + MPP46_GPIO, /* Rebuild LED brightness control 1 */ + MPP47_GPIO, /* Rebuild LED brightness control 2 */ + 0 +}; + +void __init iomega_ix2_200_init(void) +{ + /* + * Basic setup. Needs to be called early. + */ + kirkwood_mpp_conf(iomega_ix2_200_mpp_config); + + kirkwood_ehci_init(); + + kirkwood_ge01_init(&iomega_ix2_200_ge00_data); +} diff --git a/arch/arm/mach-kirkwood/common.h b/arch/arm/mach-kirkwood/common.h index 304dd1abfdca..d5d406469b74 100644 --- a/arch/arm/mach-kirkwood/common.h +++ b/arch/arm/mach-kirkwood/common.h @@ -94,6 +94,12 @@ void lsxl_init(void); static inline void lsxl_init(void) {}; #endif +#ifdef CONFIG_MACH_IOMEGA_IX2_200_DT +void iomega_ix2_200_init(void); +#else +static inline void iomega_ix2_200_init(void) {}; +#endif + /* early init functions not converted to fdt yet */ char *kirkwood_id(void); void kirkwood_l2_init(void); -- 2.20.1