From 4ec6f9c0c9602bf8e6972eca470fbd1e99c5b222 Mon Sep 17 00:00:00 2001 From: Amitkumar Karwar Date: Mon, 26 Sep 2011 20:37:25 -0700 Subject: [PATCH] mwifiex: fix Tx data rate display issue "iw dev mlan0 link" shows wrong data rate, because data rate is not sent properly to cfg80211 stack. Also stack is not updated with mcs and Tx data flags information. Signed-off-by: Amitkumar Karwar Signed-off-by: Bing Zhao Signed-off-by: John W. Linville --- drivers/net/wireless/mwifiex/cfg80211.c | 18 +++++++++++++++++- 1 file changed, 17 insertions(+), 1 deletion(-) diff --git a/drivers/net/wireless/mwifiex/cfg80211.c b/drivers/net/wireless/mwifiex/cfg80211.c index a7c773ebfe2f..e61a6c0dd0ff 100644 --- a/drivers/net/wireless/mwifiex/cfg80211.c +++ b/drivers/net/wireless/mwifiex/cfg80211.c @@ -543,12 +543,28 @@ mwifiex_dump_station_info(struct mwifiex_private *priv, ret = -EFAULT; } + /* + * Bit 0 in tx_htinfo indicates that current Tx rate is 11n rate. Valid + * MCS index values for us are 0 to 7. + */ + if ((priv->tx_htinfo & BIT(0)) && (priv->tx_rate < 8)) { + sinfo->txrate.mcs = priv->tx_rate; + sinfo->txrate.flags |= RATE_INFO_FLAGS_MCS; + /* 40MHz rate */ + if (priv->tx_htinfo & BIT(1)) + sinfo->txrate.flags |= RATE_INFO_FLAGS_40_MHZ_WIDTH; + /* SGI enabled */ + if (priv->tx_htinfo & BIT(2)) + sinfo->txrate.flags |= RATE_INFO_FLAGS_SHORT_GI; + } + sinfo->rx_bytes = priv->stats.rx_bytes; sinfo->tx_bytes = priv->stats.tx_bytes; sinfo->rx_packets = priv->stats.rx_packets; sinfo->tx_packets = priv->stats.tx_packets; sinfo->signal = priv->qual_level; - sinfo->txrate.legacy = rate.rate; + /* bit rate is in 500 kb/s units. Convert it to 100kb/s units */ + sinfo->txrate.legacy = rate.rate * 5; return ret; } -- 2.20.1