From 4d9cbff5aae65880e3d1e44357924fafc8d8bea0 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Tue, 17 Feb 2015 13:11:11 +0100 Subject: [PATCH] regulator: da9210: Mask all interrupt sources to deassert interrupt line After boot-up, some events may be set, and cause the da9210 interrupt line to be asserted. As the da9210 driver doesn't have interrupt support yet, this causes havoc on systems where the interrupt line is shared among multiple devices. This is the case on e.g. r8a7791/koelsch, where the interrupt line is shared with a da9063 regulator, and the following events are set: EVENT_A = 0x00000011 (GPI0 | GPI4) EVENT_B = 0x00000002 (NPWRGOOD) Signed-off-by: Geert Uytterhoeven Signed-off-by: Mark Brown --- drivers/regulator/da9210-regulator.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/drivers/regulator/da9210-regulator.c b/drivers/regulator/da9210-regulator.c index bc6100103f7f..f0489cb9018b 100644 --- a/drivers/regulator/da9210-regulator.c +++ b/drivers/regulator/da9210-regulator.c @@ -152,6 +152,15 @@ static int da9210_i2c_probe(struct i2c_client *i2c, config.regmap = chip->regmap; config.of_node = dev->of_node; + /* Mask all interrupt sources to deassert interrupt line */ + error = regmap_write(chip->regmap, DA9210_REG_MASK_A, ~0); + if (!error) + error = regmap_write(chip->regmap, DA9210_REG_MASK_B, ~0); + if (error) { + dev_err(&i2c->dev, "Failed to write to mask reg: %d\n", error); + return error; + } + rdev = devm_regulator_register(&i2c->dev, &da9210_reg, &config); if (IS_ERR(rdev)) { dev_err(&i2c->dev, "Failed to register DA9210 regulator\n"); -- 2.20.1