From 4bf4ea9dca4ba1984abeb592f429265b9bacac42 Mon Sep 17 00:00:00 2001 From: Peter Hurley Date: Tue, 30 Dec 2014 20:28:15 -0500 Subject: [PATCH] serial: omap_8250: Fix RTS handling The OMAP3 UART ignores MCR[1] (ie., UART_MCR_RTS) when in autoRTS mode (UPF_HARD_FLOW + CRTSCTS). This makes it impossible for either the serial core or userspace to manually flow control the sender. Disable autoRTS mode when RTS is lowered and restore the previous mode when RTS is raised. Note that the OMAP3 UART provides no mechanism for switching from autoRTS mode without corrupting incoming data; to access the necessary register, the line control settings must be set to 8-e-2 and thus any data received during that time will be interpreted with those settings. This corruption has been observed in practice. Cc: Sebastian Andrzej Siewior Signed-off-by: Peter Hurley Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/8250/8250_core.c | 12 +++++++++++- drivers/tty/serial/8250/8250_omap.c | 25 ++++++++++++++++++++++--- include/linux/serial_8250.h | 1 + include/linux/serial_core.h | 1 + 4 files changed, 35 insertions(+), 4 deletions(-) diff --git a/drivers/tty/serial/8250/8250_core.c b/drivers/tty/serial/8250/8250_core.c index 11c66856ba2f..3bfcfdb57d05 100644 --- a/drivers/tty/serial/8250/8250_core.c +++ b/drivers/tty/serial/8250/8250_core.c @@ -1924,7 +1924,7 @@ static unsigned int serial8250_get_mctrl(struct uart_port *port) return ret; } -static void serial8250_set_mctrl(struct uart_port *port, unsigned int mctrl) +void serial8250_do_set_mctrl(struct uart_port *port, unsigned int mctrl) { struct uart_8250_port *up = up_to_u8250p(port); unsigned char mcr = 0; @@ -1944,6 +1944,14 @@ static void serial8250_set_mctrl(struct uart_port *port, unsigned int mctrl) serial_port_out(port, UART_MCR, mcr); } +EXPORT_SYMBOL_GPL(serial8250_do_set_mctrl); + +static void serial8250_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ + if (port->set_mctrl) + return port->set_mctrl(port, mctrl); + return serial8250_do_set_mctrl(port, mctrl); +} static void serial8250_break_ctl(struct uart_port *port, int break_state) { @@ -3605,6 +3613,8 @@ int serial8250_register_8250_port(struct uart_8250_port *up) /* Possibly override set_termios call */ if (up->port.set_termios) uart->port.set_termios = up->port.set_termios; + if (up->port.set_mctrl) + uart->port.set_mctrl = up->port.set_mctrl; if (up->port.startup) uart->port.startup = up->port.startup; if (up->port.shutdown) diff --git a/drivers/tty/serial/8250/8250_omap.c b/drivers/tty/serial/8250/8250_omap.c index 273f37c6b493..227033db214b 100644 --- a/drivers/tty/serial/8250/8250_omap.c +++ b/drivers/tty/serial/8250/8250_omap.c @@ -106,6 +106,27 @@ static u32 uart_read(struct uart_8250_port *up, u32 reg) return readl(up->port.membase + (reg << up->port.regshift)); } +static void omap8250_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ + struct uart_8250_port *up = up_to_u8250p(port); + struct omap8250_priv *priv = up->port.private_data; + u8 lcr; + + serial8250_do_set_mctrl(port, mctrl); + + /* + * Turn off autoRTS if RTS is lowered and restore autoRTS setting + * if RTS is raised + */ + lcr = serial_in(up, UART_LCR); + serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); + if (mctrl & TIOCM_RTS) + serial_out(up, UART_EFR, priv->efr); + else + serial_out(up, UART_EFR, priv->efr & ~UART_EFR_RTS); + serial_out(up, UART_LCR, lcr); +} + /* * Work Around for Errata i202 (2430, 3430, 3630, 4430 and 4460) * The access to uart register after MDR1 Access @@ -400,9 +421,6 @@ static void omap_8250_set_termios(struct uart_port *port, if (termios->c_cflag & CRTSCTS && up->port.flags & UPF_HARD_FLOW) { /* Enable AUTORTS and AUTOCTS */ priv->efr |= UART_EFR_CTS | UART_EFR_RTS; - - /* Ensure MCR RTS is asserted */ - up->mcr |= UART_MCR_RTS; } else if (up->port.flags & UPF_SOFT_FLOW) { /* * IXON Flag: @@ -1007,6 +1025,7 @@ static int omap8250_probe(struct platform_device *pdev) up.capabilities |= UART_CAP_RPM; #endif up.port.set_termios = omap_8250_set_termios; + up.port.set_mctrl = omap8250_set_mctrl; up.port.pm = omap_8250_pm; up.port.startup = omap_8250_startup; up.port.shutdown = omap_8250_shutdown; diff --git a/include/linux/serial_8250.h b/include/linux/serial_8250.h index e02acf0a0ec9..245b959f1ff6 100644 --- a/include/linux/serial_8250.h +++ b/include/linux/serial_8250.h @@ -126,6 +126,7 @@ extern int serial8250_do_startup(struct uart_port *port); extern void serial8250_do_shutdown(struct uart_port *port); extern void serial8250_do_pm(struct uart_port *port, unsigned int state, unsigned int oldstate); +extern void serial8250_do_set_mctrl(struct uart_port *port, unsigned int mctrl); extern int fsl8250_handle_irq(struct uart_port *port); int serial8250_handle_irq(struct uart_port *port, unsigned int iir); unsigned char serial8250_rx_chars(struct uart_8250_port *up, unsigned char lsr); diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h index 057038cf2788..a0c7033d5f91 100644 --- a/include/linux/serial_core.h +++ b/include/linux/serial_core.h @@ -123,6 +123,7 @@ struct uart_port { void (*set_termios)(struct uart_port *, struct ktermios *new, struct ktermios *old); + void (*set_mctrl)(struct uart_port *, unsigned int); int (*startup)(struct uart_port *port); void (*shutdown)(struct uart_port *port); void (*throttle)(struct uart_port *port); -- 2.20.1