From 4be8c3873e0b88397866d3ede578503e188f9ad2 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 7 Jan 2009 18:28:20 +0100 Subject: [PATCH] mac80211: extend/document powersave API This modifies hardware flags for powersave to support three different flags: * IEEE80211_HW_SUPPORTS_PS - indicates general PS support * IEEE80211_HW_PS_NULLFUNC_STACK - indicates nullfunc sending in software * IEEE80211_HW_SUPPORTS_DYNAMIC_PS - indicates dynamic PS on the device It also adds documentation for all this which explains how to set the various flags. Additionally, it fixes a few things: * a spot where && was used to test flags * enable CONF_PS only when associated again Signed-off-by: Johannes Berg Signed-off-by: John W. Linville --- Documentation/DocBook/mac80211.tmpl | 8 +++- drivers/net/wireless/iwlwifi/iwl-core.c | 3 +- drivers/net/wireless/rt2x00/rt2400pci.c | 4 +- drivers/net/wireless/rt2x00/rt2500pci.c | 4 +- drivers/net/wireless/rt2x00/rt2500usb.c | 4 +- drivers/net/wireless/rt2x00/rt61pci.c | 4 +- drivers/net/wireless/rt2x00/rt73usb.c | 4 +- include/net/mac80211.h | 53 ++++++++++++++++++++++--- net/mac80211/mlme.c | 31 +++++++-------- net/mac80211/tx.c | 2 +- net/mac80211/wext.c | 40 +++++++++++-------- 11 files changed, 111 insertions(+), 46 deletions(-) diff --git a/Documentation/DocBook/mac80211.tmpl b/Documentation/DocBook/mac80211.tmpl index bdf908a6e545..8af6d9626878 100644 --- a/Documentation/DocBook/mac80211.tmpl +++ b/Documentation/DocBook/mac80211.tmpl @@ -17,8 +17,7 @@ - 2007 - 2008 + 2007-2009 Johannes Berg @@ -223,6 +222,11 @@ usage should require reading the full document. !Finclude/net/mac80211.h ieee80211_key_flags + + Powersave support +!Pinclude/net/mac80211.h Powersave support + + Multiple queues and QoS support TBD diff --git a/drivers/net/wireless/iwlwifi/iwl-core.c b/drivers/net/wireless/iwlwifi/iwl-core.c index 76315c30e6fc..07c3870365be 100644 --- a/drivers/net/wireless/iwlwifi/iwl-core.c +++ b/drivers/net/wireless/iwlwifi/iwl-core.c @@ -805,7 +805,8 @@ int iwl_setup_mac(struct iwl_priv *priv) /* Tell mac80211 our characteristics */ hw->flags = IEEE80211_HW_SIGNAL_DBM | IEEE80211_HW_NOISE_DBM | - IEEE80211_HW_AMPDU_AGGREGATION; + IEEE80211_HW_AMPDU_AGGREGATION | + IEEE80211_HW_SUPPORTS_PS; hw->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION) | BIT(NL80211_IFTYPE_ADHOC); diff --git a/drivers/net/wireless/rt2x00/rt2400pci.c b/drivers/net/wireless/rt2x00/rt2400pci.c index 9104113270d0..ae8bfd6b59df 100644 --- a/drivers/net/wireless/rt2x00/rt2400pci.c +++ b/drivers/net/wireless/rt2x00/rt2400pci.c @@ -1449,7 +1449,9 @@ static int rt2400pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev) * Initialize all hw fields. */ rt2x00dev->hw->flags = IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING | - IEEE80211_HW_SIGNAL_DBM; + IEEE80211_HW_SIGNAL_DBM | + IEEE80211_HW_SUPPORTS_PS | + IEEE80211_HW_PS_NULLFUNC_STACK; rt2x00dev->hw->extra_tx_headroom = 0; SET_IEEE80211_DEV(rt2x00dev->hw, rt2x00dev->dev); diff --git a/drivers/net/wireless/rt2x00/rt2500pci.c b/drivers/net/wireless/rt2x00/rt2500pci.c index ebcc49770922..bca6798be153 100644 --- a/drivers/net/wireless/rt2x00/rt2500pci.c +++ b/drivers/net/wireless/rt2x00/rt2500pci.c @@ -1749,7 +1749,9 @@ static int rt2500pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev) * Initialize all hw fields. */ rt2x00dev->hw->flags = IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING | - IEEE80211_HW_SIGNAL_DBM; + IEEE80211_HW_SIGNAL_DBM | + IEEE80211_HW_SUPPORTS_PS | + IEEE80211_HW_PS_NULLFUNC_STACK; rt2x00dev->hw->extra_tx_headroom = 0; diff --git a/drivers/net/wireless/rt2x00/rt2500usb.c b/drivers/net/wireless/rt2x00/rt2500usb.c index e992bad64644..27a6971df579 100644 --- a/drivers/net/wireless/rt2x00/rt2500usb.c +++ b/drivers/net/wireless/rt2x00/rt2500usb.c @@ -1801,7 +1801,9 @@ static int rt2500usb_probe_hw_mode(struct rt2x00_dev *rt2x00dev) rt2x00dev->hw->flags = IEEE80211_HW_RX_INCLUDES_FCS | IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING | - IEEE80211_HW_SIGNAL_DBM; + IEEE80211_HW_SIGNAL_DBM | + IEEE80211_HW_SUPPORTS_PS | + IEEE80211_HW_PS_NULLFUNC_STACK; rt2x00dev->hw->extra_tx_headroom = TXD_DESC_SIZE; diff --git a/drivers/net/wireless/rt2x00/rt61pci.c b/drivers/net/wireless/rt2x00/rt61pci.c index 82d35a5a4aa7..549480a963e9 100644 --- a/drivers/net/wireless/rt2x00/rt61pci.c +++ b/drivers/net/wireless/rt2x00/rt61pci.c @@ -2556,7 +2556,9 @@ static int rt61pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev) */ rt2x00dev->hw->flags = IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING | - IEEE80211_HW_SIGNAL_DBM; + IEEE80211_HW_SIGNAL_DBM | + IEEE80211_HW_SUPPORTS_PS | + IEEE80211_HW_PS_NULLFUNC_STACK; rt2x00dev->hw->extra_tx_headroom = 0; SET_IEEE80211_DEV(rt2x00dev->hw, rt2x00dev->dev); diff --git a/drivers/net/wireless/rt2x00/rt73usb.c b/drivers/net/wireless/rt2x00/rt73usb.c index 2b70c01b55e9..849220236c7d 100644 --- a/drivers/net/wireless/rt2x00/rt73usb.c +++ b/drivers/net/wireless/rt2x00/rt73usb.c @@ -2077,7 +2077,9 @@ static int rt73usb_probe_hw_mode(struct rt2x00_dev *rt2x00dev) */ rt2x00dev->hw->flags = IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING | - IEEE80211_HW_SIGNAL_DBM; + IEEE80211_HW_SIGNAL_DBM | + IEEE80211_HW_SUPPORTS_PS | + IEEE80211_HW_PS_NULLFUNC_STACK; rt2x00dev->hw->extra_tx_headroom = TXD_DESC_SIZE; SET_IEEE80211_DEV(rt2x00dev->hw, rt2x00dev->dev); diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 83ee8a212296..8a305bfdb87b 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -850,10 +850,15 @@ enum ieee80211_tkip_key_type { * @IEEE80211_HW_AMPDU_AGGREGATION: * Hardware supports 11n A-MPDU aggregation. * - * @IEEE80211_HW_NO_STACK_DYNAMIC_PS: - * Hardware which has dynamic power save support, meaning - * that power save is enabled in idle periods, and don't need support - * from stack. + * @IEEE80211_HW_SUPPORTS_PS: + * Hardware has power save support (i.e. can go to sleep). + * + * @IEEE80211_HW_PS_NULLFUNC_STACK: + * Hardware requires nullfunc frame handling in stack, implies + * stack support for dynamic PS. + * + * @IEEE80211_HW_SUPPORTS_DYNAMIC_PS: + * Hardware has support for dynamic PS. */ enum ieee80211_hw_flags { IEEE80211_HW_RX_INCLUDES_FCS = 1<<1, @@ -866,7 +871,9 @@ enum ieee80211_hw_flags { IEEE80211_HW_NOISE_DBM = 1<<8, IEEE80211_HW_SPECTRUM_MGMT = 1<<9, IEEE80211_HW_AMPDU_AGGREGATION = 1<<10, - IEEE80211_HW_NO_STACK_DYNAMIC_PS = 1<<11, + IEEE80211_HW_SUPPORTS_PS = 1<<11, + IEEE80211_HW_PS_NULLFUNC_STACK = 1<<12, + IEEE80211_HW_SUPPORTS_DYNAMIC_PS = 1<<13, }; /** @@ -1052,6 +1059,42 @@ ieee80211_get_alt_retry_rate(const struct ieee80211_hw *hw, * handler is software decryption with wrap around of iv16. */ +/** + * DOC: Powersave support + * + * mac80211 has support for various powersave implementations. + * + * First, it can support hardware that handles all powersaving by + * itself, such hardware should simply set the %IEEE80211_HW_SUPPORTS_PS + * hardware flag. In that case, it will be told about the desired + * powersave mode depending on the association status, and the driver + * must take care of sending nullfunc frames when necessary, i.e. when + * entering and leaving powersave mode. The driver is required to look at + * the AID in beacons and signal to the AP that it woke up when it finds + * traffic directed to it. This mode supports dynamic PS by simply + * enabling/disabling PS. + * + * Additionally, such hardware may set the %IEEE80211_HW_SUPPORTS_DYNAMIC_PS + * flag to indicate that it can support dynamic PS mode itself (see below). + * + * Other hardware designs cannot send nullfunc frames by themselves and also + * need software support for parsing the TIM bitmap. This is also supported + * by mac80211 by combining the %IEEE80211_HW_SUPPORTS_PS and + * %IEEE80211_HW_PS_NULLFUNC_STACK flags. The hardware is of course still + * required to pass up beacons. Additionally, in this case, mac80211 will + * wake up the hardware when multicast traffic is announced in the beacon. + * + * FIXME: I don't think we can be fast enough in software when we want to + * receive multicast traffic? + * + * Dynamic powersave mode is an extension to normal powersave mode in which + * the hardware stays awake for a user-specified period of time after sending + * a frame so that reply frames need not be buffered and therefore delayed + * to the next wakeup. This can either be supported by hardware, in which case + * the driver needs to look at the @dynamic_ps_timeout hardware configuration + * value, or by the stack if all nullfunc handling is in the stack. + */ + /** * DOC: Frame filtering * diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index 7709e7645671..a1e683e305f0 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -775,17 +775,17 @@ static void ieee80211_set_associated(struct ieee80211_sub_if_data *sdata, bss_info_changed |= BSS_CHANGED_BASIC_RATES; ieee80211_bss_info_change_notify(sdata, bss_info_changed); - if (local->powersave && - !(local->hw.flags & IEEE80211_HW_NO_STACK_DYNAMIC_PS)) { - if (local->hw.conf.dynamic_ps_timeout > 0) + if (local->powersave) { + if (!(local->hw.flags & IEEE80211_HW_SUPPORTS_DYNAMIC_PS) && + local->hw.conf.dynamic_ps_timeout > 0) { mod_timer(&local->dynamic_ps_timer, jiffies + msecs_to_jiffies( local->hw.conf.dynamic_ps_timeout)); - else { - ieee80211_send_nullfunc(local, sdata, 1); + } else { + if (local->hw.flags & IEEE80211_HW_PS_NULLFUNC_STACK) + ieee80211_send_nullfunc(local, sdata, 1); conf->flags |= IEEE80211_CONF_PS; - ieee80211_hw_config(local, - IEEE80211_CONF_CHANGE_PS); + ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_PS); } } @@ -1779,16 +1779,14 @@ static void ieee80211_rx_mgmt_beacon(struct ieee80211_sub_if_data *sdata, ieee80211_sta_wmm_params(local, ifsta, elems.wmm_param, elems.wmm_param_len); - if (!(local->hw.flags & IEEE80211_HW_NO_STACK_DYNAMIC_PS)) { + if (local->hw.flags & IEEE80211_HW_PS_NULLFUNC_STACK && + local->hw.conf.flags & IEEE80211_CONF_PS) { directed_tim = check_tim(&elems, ifsta->aid, &is_mc); if (directed_tim || is_mc) { - if (local->hw.conf.flags && IEEE80211_CONF_PS) { - local->hw.conf.flags &= ~IEEE80211_CONF_PS; - ieee80211_hw_config(local, - IEEE80211_CONF_CHANGE_PS); - ieee80211_send_nullfunc(local, sdata, 0); - } + local->hw.conf.flags &= ~IEEE80211_CONF_PS; + ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_PS); + ieee80211_send_nullfunc(local, sdata, 0); } } @@ -2694,9 +2692,10 @@ void ieee80211_dynamic_ps_enable_work(struct work_struct *work) if (local->hw.conf.flags & IEEE80211_CONF_PS) return; - ieee80211_send_nullfunc(local, sdata, 1); - local->hw.conf.flags |= IEEE80211_CONF_PS; + if (local->hw.flags & IEEE80211_HW_PS_NULLFUNC_STACK) + ieee80211_send_nullfunc(local, sdata, 1); + local->hw.conf.flags |= IEEE80211_CONF_PS; ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_PS); } diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c index b18a72690119..cd6bc87eec73 100644 --- a/net/mac80211/tx.c +++ b/net/mac80211/tx.c @@ -1295,7 +1295,7 @@ int ieee80211_master_start_xmit(struct sk_buff *skb, struct net_device *dev) return 0; } - if (!(local->hw.flags & IEEE80211_HW_NO_STACK_DYNAMIC_PS) && + if ((local->hw.flags & IEEE80211_HW_PS_NULLFUNC_STACK) && local->hw.conf.dynamic_ps_timeout > 0) { if (local->hw.conf.flags & IEEE80211_CONF_PS) { ieee80211_stop_queues_by_reason(&local->hw, diff --git a/net/mac80211/wext.c b/net/mac80211/wext.c index 3f2db0bda46c..1e5b29bdb3a7 100644 --- a/net/mac80211/wext.c +++ b/net/mac80211/wext.c @@ -837,6 +837,9 @@ static int ieee80211_ioctl_siwpower(struct net_device *dev, int ret = 0, timeout = 0; bool ps; + if (!(local->hw.flags & IEEE80211_HW_SUPPORTS_PS)) + return -EOPNOTSUPP; + if (sdata->vif.type != NL80211_IFTYPE_STATION) return -EINVAL; @@ -862,32 +865,37 @@ static int ieee80211_ioctl_siwpower(struct net_device *dev, if (wrq->flags & IW_POWER_TIMEOUT) timeout = wrq->value / 1000; -set: + set: if (ps == local->powersave && timeout == conf->dynamic_ps_timeout) return ret; local->powersave = ps; conf->dynamic_ps_timeout = timeout; - if (local->hw.flags & IEEE80211_HW_NO_STACK_DYNAMIC_PS) { + if (local->hw.flags & IEEE80211_HW_SUPPORTS_DYNAMIC_PS) ret = ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_DYNPS_TIMEOUT); - } else if (sdata->u.sta.flags & IEEE80211_STA_ASSOCIATED) { - if (conf->dynamic_ps_timeout > 0) - mod_timer(&local->dynamic_ps_timer, jiffies + - msecs_to_jiffies(conf->dynamic_ps_timeout)); - else { - if (local->powersave) { + + if (!(sdata->u.sta.flags & IEEE80211_STA_ASSOCIATED)) + return ret; + + if (conf->dynamic_ps_timeout > 0 && + !(local->hw.flags & IEEE80211_HW_SUPPORTS_DYNAMIC_PS)) { + mod_timer(&local->dynamic_ps_timer, jiffies + + msecs_to_jiffies(conf->dynamic_ps_timeout)); + } else { + if (local->powersave) { + if (local->hw.flags & IEEE80211_HW_PS_NULLFUNC_STACK) ieee80211_send_nullfunc(local, sdata, 1); - conf->flags |= IEEE80211_CONF_PS; - ret = ieee80211_hw_config(local, - IEEE80211_CONF_CHANGE_PS); - } else { - conf->flags &= ~IEEE80211_CONF_PS; - ret = ieee80211_hw_config(local, - IEEE80211_CONF_CHANGE_PS); + conf->flags |= IEEE80211_CONF_PS; + ret = ieee80211_hw_config(local, + IEEE80211_CONF_CHANGE_PS); + } else { + conf->flags &= ~IEEE80211_CONF_PS; + ret = ieee80211_hw_config(local, + IEEE80211_CONF_CHANGE_PS); + if (local->hw.flags & IEEE80211_HW_PS_NULLFUNC_STACK) ieee80211_send_nullfunc(local, sdata, 0); - } } } -- 2.20.1