From 4a2947e32ea9ca2bc36d68022b7d7b1014dca18f Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Fri, 21 Oct 2016 14:21:56 -0700 Subject: [PATCH] net: dsa: bcm_sf2: Do not rely on kexec_in_progress After discussing with Eric, it turns out that, while using kexec_in_progress is a nice optimization, which prevents us from always powering on the integrated PHY, let's just turn it on in the shutdown path. This removes a dependency on kexec_in_progress which, according to Eric should not be used by modules Fixes: 2399d6143f85 ("net: dsa: bcm_sf2: Prevent GPHY shutdown for kexec'd kernels") Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller --- drivers/net/dsa/bcm_sf2.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/net/dsa/bcm_sf2.c b/drivers/net/dsa/bcm_sf2.c index 077a24541584..e3ee27ce13dd 100644 --- a/drivers/net/dsa/bcm_sf2.c +++ b/drivers/net/dsa/bcm_sf2.c @@ -30,7 +30,6 @@ #include #include #include -#include #include "bcm_sf2.h" #include "bcm_sf2_regs.h" @@ -1141,9 +1140,11 @@ static void bcm_sf2_sw_shutdown(struct platform_device *pdev) /* For a kernel about to be kexec'd we want to keep the GPHY on for a * successful MDIO bus scan to occur. If we did turn off the GPHY * before (e.g: port_disable), this will also power it back on. + * + * Do not rely on kexec_in_progress, just power the PHY on. */ if (priv->hw_params.num_gphy == 1) - bcm_sf2_gphy_enable_set(priv->dev->ds, kexec_in_progress); + bcm_sf2_gphy_enable_set(priv->dev->ds, true); } #ifdef CONFIG_PM_SLEEP -- 2.20.1