From 49db139955d3392c6c4facf987905d0a9afed581 Mon Sep 17 00:00:00 2001 From: Zhao Yakui Date: Tue, 13 May 2008 11:15:05 +0800 Subject: [PATCH] PCI: Disable PME during PCI scan If a device supports #PME and can generate PME events from D0, we may see superfluous events before a driver is loaded (drivers should only enable PME as needed), preventing suspend from working if the corresponding GPE was enabled. Likewise, if the ACPI device has the _PRW object, the _PSW/_DSW object will be called in order to disable the wakeup functionality. But when it is allowed to wake up the sleeping state, OSPM will enable it again. So we should disable PME in the course of scanning PCI devices and enable it again only when PME events are actually required to be generated from the requested PCI state (for example, D3_hot or D3_cold). It is also safe to disable PME again when the PME is disabled for the PCI devices. Signed-off-by: Zhao Yakui Signed-off-by: Li Shaohua Signed-off-by: Jesse Barnes --- drivers/pci/probe.c | 44 ++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 44 insertions(+) diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c index 3706ce7972dd..aebab71abebf 100644 --- a/drivers/pci/probe.c +++ b/drivers/pci/probe.c @@ -857,6 +857,49 @@ int pci_cfg_space_size_ext(struct pci_dev *dev) return PCI_CFG_SPACE_SIZE; } +/** + * pci_disable_pme - Disable the PME function of PCI device + * @dev: PCI device affected + * -EINVAL is returned if PCI device doesn't support PME. + * Zero is returned if the PME is supported and can be disabled. + */ +static int pci_disable_pme(struct pci_dev *dev) +{ + int pm; + u16 value; + + /* find PCI PM capability in list */ + pm = pci_find_capability(dev, PCI_CAP_ID_PM); + + /* If device doesn't support PM Capabilities, it means that PME is + * not supported. + */ + if (!pm) + return -EINVAL; + /* Check device's ability to generate PME# */ + pci_read_config_word(dev, pm + PCI_PM_PMC, &value); + + value &= PCI_PM_CAP_PME_MASK; + /* Check if it can generate PME# */ + if (!value) { + /* + * If it is zero, it means that PME is still unsupported + * although there exists the PM capability. + */ + return -EINVAL; + } + + pci_read_config_word(dev, pm + PCI_PM_CTRL, &value); + + /* Clear PME_Status by writing 1 to it */ + value |= PCI_PM_CTRL_PME_STATUS ; + /* Disable PME enable bit */ + value &= ~PCI_PM_CTRL_PME_ENABLE; + pci_write_config_word(dev, pm + PCI_PM_CTRL, value); + + return 0; +} + int pci_cfg_space_size(struct pci_dev *dev) { int pos; @@ -964,6 +1007,7 @@ static struct pci_dev *pci_scan_device(struct pci_bus *bus, int devfn) } pci_vpd_pci22_init(dev); + pci_disable_pme(dev); return dev; } -- 2.20.1