From 49d22c70aaf07cd7e33346b247f5df3ddb072ee0 Mon Sep 17 00:00:00 2001 From: Geoff Lansberry Date: Wed, 21 Dec 2016 23:18:33 -0500 Subject: [PATCH] NFC: trf7970a: Add device tree option of 1.8 Volt IO voltage The TRF7970A has configuration options for supporting hardware designs with 1.8 Volt or 3.3 Volt IO. This commit adds a device tree option, using a fixed regulator binding, for setting the io voltage to match the hardware configuration. If no option is supplied it defaults to 3.3 volt configuration. Acked-by: Rob Herring Acked-by: Mark Greer Signed-off-by: Geoff Lansberry Signed-off-by: Samuel Ortiz --- .../devicetree/bindings/net/nfc/trf7970a.txt | 2 ++ drivers/nfc/trf7970a.c | 26 ++++++++++++++++++- 2 files changed, 27 insertions(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/net/nfc/trf7970a.txt b/Documentation/devicetree/bindings/net/nfc/trf7970a.txt index 1d186cd9817b..c627bbb3009e 100644 --- a/Documentation/devicetree/bindings/net/nfc/trf7970a.txt +++ b/Documentation/devicetree/bindings/net/nfc/trf7970a.txt @@ -21,6 +21,7 @@ Optional SoC Specific Properties: - t5t-rmb-extra-byte-quirk: Specify that the trf7970a has the erratum where an extra byte is returned by Read Multiple Block commands issued to Type 5 tags. +- vdd-io-supply: Regulator specifying voltage for vdd-io - clock-frequency: Set to specify that the input frequency to the trf7970a is 13560000Hz or 27120000Hz Example (for ARM-based BeagleBone with TRF7970A on SPI1): @@ -40,6 +41,7 @@ Example (for ARM-based BeagleBone with TRF7970A on SPI1): <&gpio2 5 GPIO_ACTIVE_LOW>; vin-supply = <&ldo3_reg>; vin-voltage-override = <5000000>; + vdd-io-supply = <&ldo2_reg>; autosuspend-delay = <30000>; irq-status-read-quirk; en2-rf-quirk; diff --git a/drivers/nfc/trf7970a.c b/drivers/nfc/trf7970a.c index ecb786283ffa..2d1c8ca6e679 100644 --- a/drivers/nfc/trf7970a.c +++ b/drivers/nfc/trf7970a.c @@ -444,6 +444,7 @@ struct trf7970a { u8 iso_ctrl_tech; u8 modulator_sys_clk_ctrl; u8 special_fcn_reg1; + u8 io_ctrl; unsigned int guard_time; int technology; int framing; @@ -1051,6 +1052,11 @@ static int trf7970a_init(struct trf7970a *trf) if (ret) goto err_out; + ret = trf7970a_write(trf, TRF7970A_REG_IO_CTRL, + trf->io_ctrl | TRF7970A_REG_IO_CTRL_VRS(0x1)); + if (ret) + goto err_out; + ret = trf7970a_write(trf, TRF7970A_NFC_TARGET_LEVEL, 0); if (ret) goto err_out; @@ -1767,7 +1773,7 @@ static int _trf7970a_tg_listen(struct nfc_digital_dev *ddev, u16 timeout, goto out_err; ret = trf7970a_write(trf, TRF7970A_REG_IO_CTRL, - TRF7970A_REG_IO_CTRL_VRS(0x1)); + trf->io_ctrl | TRF7970A_REG_IO_CTRL_VRS(0x1)); if (ret) goto out_err; @@ -2107,6 +2113,24 @@ static int trf7970a_probe(struct spi_device *spi) if (uvolts > 4000000) trf->chip_status_ctrl = TRF7970A_CHIP_STATUS_VRS5_3; + trf->regulator = devm_regulator_get(&spi->dev, "vdd-io"); + if (IS_ERR(trf->regulator)) { + ret = PTR_ERR(trf->regulator); + dev_err(trf->dev, "Can't get VDD_IO regulator: %d\n", ret); + goto err_destroy_lock; + } + + ret = regulator_enable(trf->regulator); + if (ret) { + dev_err(trf->dev, "Can't enable VDD_IO: %d\n", ret); + goto err_destroy_lock; + } + + if (regulator_get_voltage(trf->regulator) == 1800000) { + trf->io_ctrl = TRF7970A_REG_IO_CTRL_IO_LOW; + dev_dbg(trf->dev, "trf7970a config vdd_io to 1.8V\n"); + } + trf->ddev = nfc_digital_allocate_device(&trf7970a_nfc_ops, TRF7970A_SUPPORTED_PROTOCOLS, NFC_DIGITAL_DRV_CAPS_IN_CRC | -- 2.20.1