From 4892e0756c65d6e248e7e8ff94845e8e26bcf896 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Fri, 17 Jun 2016 22:28:12 +0200 Subject: [PATCH] ARM: dts: add Qualcomm APQ8060-based Dragonboard This is the first Dragonboard based on APQ8060 and PM8058. It was produced in 2011 in cooperation between Qualcomm and BSQUARE. Signed-off-by: Linus Walleij Signed-off-by: Andy Gross --- arch/arm/boot/dts/Makefile | 1 + .../arm/boot/dts/qcom-apq8060-dragonboard.dts | 626 ++++++++++++++++++ 2 files changed, 627 insertions(+) create mode 100644 arch/arm/boot/dts/qcom-apq8060-dragonboard.dts diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 5b7c17a1950e..b359dce6ef7c 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -572,6 +572,7 @@ dtb-$(CONFIG_ARCH_PRIMA2) += \ dtb-$(CONFIG_ARCH_OXNAS) += \ wd-mbwe.dtb dtb-$(CONFIG_ARCH_QCOM) += \ + qcom-apq8060-dragonboard.dtb \ qcom-apq8064-arrow-sd-600eval.dtb \ qcom-apq8064-cm-qs600.dtb \ qcom-apq8064-ifc6410.dtb \ diff --git a/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts b/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts new file mode 100644 index 000000000000..0abc93e5bb00 --- /dev/null +++ b/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts @@ -0,0 +1,626 @@ +/* + * Copyright 2016 Linaro Ltd + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#include +#include +#include +#include "qcom-msm8660.dtsi" + +/ { + model = "Qualcomm APQ8060 Dragonboard"; + compatible = "qcom,apq8060-dragonboard", "qcom,msm8660"; + + aliases { + serial0 = &gsbi12_serial; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + regulators { + compatible = "simple-bus"; + + /* Main power of the board: 3.7V */ + vph: regulator-fixed { + compatible = "regulator-fixed"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + regulator-name = "VPH"; + regulator-type = "voltage"; + regulator-always-on; + regulator-boot-on; + }; + + /* This is a levelshifter for SDCC5 */ + dragon_vio_txb: txb0104rgyr { + compatible = "regulator-fixed"; + regulator-name = "Dragon SDCC levelshifter"; + vin-supply = <&pm8058_l14>; + regulator-always-on; + }; + }; + + soc { + pinctrl@800000 { + /* eMMMC pins, all 8 data lines connected */ + dragon_sdcc1_pins: sdcc1 { + mux { + pins = "gpio159", "gpio160", "gpio161", + "gpio162", "gpio163", "gpio164", + "gpio165", "gpio166", "gpio167", + "gpio168"; + function = "sdc1"; + }; + clk { + pins = "gpio167"; /* SDC5 CLK */ + drive-strength = <16>; + bias-disable; + }; + cmd { + pins = "gpio168"; /* SDC5 CMD */ + drive-strength = <10>; + bias-pull-up; + }; + data { + /* SDC5 D0 to D7 */ + pins = "gpio159", "gpio160", "gpio161", "gpio162", + "gpio163", "gpio164", "gpio165", "gpio166"; + drive-strength = <10>; + bias-pull-up; + }; + }; + + /* + * The SDCC3 pins are hardcoded (non-muxable) but need some pin + * configuration. + */ + dragon_sdcc3_pins: sdcc3 { + clk { + pins = "sdc3_clk"; + drive-strength = <8>; + bias-disable; + }; + cmd { + pins = "sdc3_cmd"; + drive-strength = <8>; + bias-pull-up; + }; + data { + pins = "sdc3_data"; + drive-strength = <8>; + bias-pull-up; + }; + }; + + /* Second SD card slot pins */ + dragon_sdcc5_pins: sdcc5 { + mux { + pins = "gpio95", "gpio96", "gpio97", + "gpio98", "gpio99", "gpio100"; + function = "sdc5"; + }; + clk { + pins = "gpio97"; /* SDC5 CLK */ + drive-strength = <16>; + bias-disable; + }; + cmd { + pins = "gpio95"; /* SDC5 CMD */ + drive-strength = <10>; + bias-pull-up; + }; + data { + /* SDC5 D0 to D3 */ + pins = "gpio96", "gpio98", "gpio99", "gpio100"; + drive-strength = <10>; + bias-pull-up; + }; + }; + + dragon_gsbi12_i2c_pins: gsbi12_i2c { + mux { + pins = "gpio115", "gpio116"; + function = "gsbi12"; + }; + pinconf { + pins = "gpio115", "gpio116"; + drive-strength = <16>; + /* These have external pull-up 4.7kOhm to 1.8V */ + bias-disable; + }; + }; + + /* Primary serial port uart 0 pins */ + dragon_gsbi12_serial_pins: gsbi12_serial { + mux { + pins = "gpio117", "gpio118"; + function = "gsbi12"; + }; + tx { + pins = "gpio117"; + drive-strength = <8>; + bias-disable; + }; + rx { + pins = "gpio118"; + drive-strength = <2>; + bias-pull-up; + }; + }; + }; + + qcom,ssbi@500000 { + pmic@0 { + keypad@148 { + linux,keymap = < + MATRIX_KEY(0, 0, KEY_MENU) + MATRIX_KEY(0, 2, KEY_1) + MATRIX_KEY(0, 3, KEY_4) + MATRIX_KEY(0, 4, KEY_7) + MATRIX_KEY(1, 0, KEY_UP) + MATRIX_KEY(1, 1, KEY_LEFT) + MATRIX_KEY(1, 2, KEY_DOWN) + MATRIX_KEY(1, 3, KEY_5) + MATRIX_KEY(1, 3, KEY_8) + MATRIX_KEY(2, 0, KEY_HOME) + MATRIX_KEY(2, 1, KEY_REPLY) + MATRIX_KEY(2, 2, KEY_2) + MATRIX_KEY(2, 3, KEY_6) + MATRIX_KEY(3, 0, KEY_VOLUMEUP) + MATRIX_KEY(3, 1, KEY_RIGHT) + MATRIX_KEY(3, 2, KEY_3) + MATRIX_KEY(3, 3, KEY_9) + MATRIX_KEY(3, 4, KEY_SWITCHVIDEOMODE) + MATRIX_KEY(4, 0, KEY_VOLUMEDOWN) + MATRIX_KEY(4, 1, KEY_BACK) + MATRIX_KEY(4, 2, KEY_CAMERA) + MATRIX_KEY(4, 3, KEY_KBDILLUMTOGGLE) + >; + keypad,num-rows = <6>; + keypad,num-columns = <5>; + }; + + gpio@150 { + dragon_bmp085_gpios: bmp085-gpios { + pinconf { + pins = "gpio16"; + function = "normal"; + input-enable; + bias-disable; + power-source = ; + }; + }; + dragon_sdcc3_gpios: sdcc3-gpios { + pinconf { + pins = "gpio22"; + function = "normal"; + input-enable; + bias-disable; + power-source = ; + }; + }; + dragon_sdcc5_gpios: sdcc5-gpios { + pinconf { + pins = "gpio26"; + function = "normal"; + input-enable; + bias-pull-up; + qcom,pull-up-strength = ; + power-source = ; + }; + }; + dragon_ak8975_gpios: ak8975-gpios { + pinconf { + pins = "gpio33"; + function = "normal"; + input-enable; + bias-disable; + power-source = ; + }; + }; + }; + }; + }; + + gsbi@19c00000 { + status = "ok"; + qcom,mode = ; + + serial@19c40000 { + status = "ok"; + pinctrl-names = "default"; + pinctrl-0 = <&dragon_gsbi12_serial_pins>; + }; + + i2c@19c80000 { + status = "ok"; + pinctrl-names = "default"; + pinctrl-0 = <&dragon_gsbi12_i2c_pins>; + + ak8975@0c { + compatible = "asahi-kasei,ak8975"; + reg = <0x0c>; + /* GPIO33 has interrupt 224 on the PM8058 */ + interrupt-parent = <&pm8058_gpio>; + interrupts = <224 IRQ_TYPE_EDGE_RISING>; + pinctrl-names = "default"; + pinctrl-0 = <&dragon_ak8975_gpios>; + vid-supply = <&pm8058_lvs0>; // 1.8V + vdd-supply = <&pm8058_l14>; // 2.85V + }; + bmp085@77 { + compatible = "bosch,bmp085"; + reg = <0x77>; + /* GPIO16 has interrupt 207 on the PM8058 */ + interrupt-parent = <&pm8058_gpio>; + interrupts = <207 IRQ_TYPE_EDGE_RISING>; + reset-gpios = <&tlmm 86 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&dragon_bmp085_gpios>; + vddd-supply = <&pm8058_lvs0>; // 1.8V + vdda-supply = <&pm8058_l14>; // 2.85V + }; + }; + }; + + rpm@104000 { + /* + * Set up of the PMIC RPM regulators for this board + * PM8901 supplies "preliminary regulators" whatever + * that means + */ + pm8901-regulators { + vdd_l0-supply = <&pm8901_s4>; + vdd_l1-supply = <&vph>; + vdd_l2-supply = <&vph>; + vdd_l3-supply = <&vph>; + vdd_l4-supply = <&vph>; + vdd_l5-supply = <&vph>; + vdd_l6-supply = <&vph>; + /* vdd_s0-supply, vdd_s1-supply: SAW regulators */ + vdd_s2-supply = <&vph>; + vdd_s3-supply = <&vph>; + vdd_s4-supply = <&vph>; + lvs0_in-supply = <&pm8058_s3>; + lvs1_in-supply = <&pm8901_s4>; + lvs2_in-supply = <&pm8058_l0>; + lvs3_in-supply = <&pm8058_s2>; + mvs_in-supply = <&pm8058_s3>; + + l0 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + bias-pull-down; + }; + l1 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + bias-pull-down; + }; + l2 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <3300000>; + bias-pull-down; + }; + l3 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + bias-pull-down; + }; + l4 { + regulator-min-microvolt = <2600000>; + regulator-max-microvolt = <2600000>; + bias-pull-down; + }; + l5 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + bias-pull-down; + }; + l6 { + regulator-min-microvolt = <2200000>; + regulator-max-microvolt = <2200000>; + bias-pull-down; + }; + + /* s0 and s1 are SAW regulators controlled over SPM */ + s2 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + qcom,switch-mode-frequency = <1600000>; + bias-pull-down; + }; + s3 { + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + qcom,switch-mode-frequency = <1600000>; + bias-pull-down; + }; + s4 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + qcom,switch-mode-frequency = <1600000>; + bias-pull-down; + }; + + /* LVS0 thru 3 and mvs0 are just switches */ + lvs0 { + regulator-always-on; + }; + lvs1 { }; + lvs2 { }; + lvs3 { }; + mvs0 {}; + + }; + + pm8058-regulators { + vdd_l0_l1_lvs-supply = <&pm8058_s3>; + vdd_l2_l11_l12-supply = <&vph>; + vdd_l3_l4_l5-supply = <&vph>; + vdd_l6_l7-supply = <&vph>; + vdd_l8-supply = <&vph>; + vdd_l9-supply = <&vph>; + vdd_l10-supply = <&vph>; + vdd_l13_l16-supply = <&pm8058_s4>; + vdd_l14_l15-supply = <&vph>; + vdd_l17_l18-supply = <&vph>; + vdd_l19_l20-supply = <&vph>; + vdd_l21-supply = <&pm8058_s3>; + vdd_l22-supply = <&pm8058_s3>; + vdd_l23_l24_l25-supply = <&pm8058_s3>; + vdd_s0-supply = <&vph>; + vdd_s1-supply = <&vph>; + vdd_s2-supply = <&vph>; + vdd_s3-supply = <&vph>; + vdd_s4-supply = <&vph>; + vdd_ncp-supply = <&vph>; + + l0 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + bias-pull-down; + }; + l1 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + bias-pull-down; + }; + l2 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2600000>; + bias-pull-down; + }; + l3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + bias-pull-down; + }; + l4 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + bias-pull-down; + }; + l5 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + bias-pull-down; + }; + l6 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3600000>; + bias-pull-down; + }; + l7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + bias-pull-down; + }; + l8 { + regulator-min-microvolt = <2900000>; + regulator-max-microvolt = <3050000>; + bias-pull-down; + }; + l9 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + bias-pull-down; + }; + l10 { + regulator-min-microvolt = <2600000>; + regulator-max-microvolt = <2600000>; + bias-pull-down; + }; + l11 { + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + bias-pull-down; + }; + l12 { + regulator-min-microvolt = <2900000>; + regulator-max-microvolt = <2900000>; + bias-pull-down; + }; + l13 { + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; + bias-pull-down; + }; + l14 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + l15 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + bias-pull-down; + }; + l16 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + bias-pull-down; + regulator-always-on; + }; + l17 { + // 1.5V according to schematic + regulator-min-microvolt = <2600000>; + regulator-max-microvolt = <2600000>; + bias-pull-down; + }; + l18 { + regulator-min-microvolt = <2200000>; + regulator-max-microvolt = <2200000>; + bias-pull-down; + }; + l19 { + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + bias-pull-down; + }; + l20 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + bias-pull-down; + }; + l21 { + // 1.1 V according to schematic + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + bias-pull-down; + regulator-always-on; + }; + l22 { + // 1.2 V according to schematic + regulator-min-microvolt = <1150000>; + regulator-max-microvolt = <1150000>; + bias-pull-down; + }; + l23 { + // Unused + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + bias-pull-down; + }; + l24 { + // Unused + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + bias-pull-down; + }; + l25 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + bias-pull-down; + }; + + s0 { + // regulator-min-microvolt = <500000>; + // regulator-max-microvolt = <1325000>; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + qcom,switch-mode-frequency = <1600000>; + bias-pull-down; + }; + s1 { + // regulator-min-microvolt = <500000>; + // regulator-max-microvolt = <1250000>; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + qcom,switch-mode-frequency = <1600000>; + bias-pull-down; + }; + s2 { + // 1.3 V according to schematic + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1400000>; + qcom,switch-mode-frequency = <1600000>; + bias-pull-down; + }; + s3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + qcom,switch-mode-frequency = <1600000>; + regulator-always-on; + bias-pull-down; + }; + s4 { + regulator-min-microvolt = <2200000>; + regulator-max-microvolt = <2200000>; + qcom,switch-mode-frequency = <1600000>; + regulator-always-on; + bias-pull-down; + }; + + /* LVS0 and LVS1 are just switches */ + lvs0 { + bias-pull-down; + }; + lvs1 { + bias-pull-down; + }; + + ncp { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + qcom,switch-mode-frequency = <1600000>; + }; + }; + }; + amba { + /* Internal 3.69 GiB eMMC */ + sdcc@12400000 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&dragon_sdcc1_pins>; + vmmc-supply = <&pm8901_l5>; + vqmmc-supply = <&pm8901_lvs0>; + }; + + /* External micro SD card, directly connected, pulled up to 2.85 V */ + sdcc@12180000 { + status = "okay"; + /* Enable SSBI GPIO 22 as input, use for card detect */ + pinctrl-names = "default"; + pinctrl-0 = <&dragon_sdcc3_pins>, <&dragon_sdcc3_gpios>; + cd-gpios = <&pm8058_gpio 22 GPIO_ACTIVE_LOW>; + wp-gpios = <&tlmm 110 GPIO_ACTIVE_HIGH>; + vmmc-supply = <&pm8058_l14>; + }; + + /* + * Second external micro SD card, using two TXB104RGYR levelshifters + * to lift from 1.8 V to 2.85 V + */ + sdcc@12200000 { + status = "okay"; + /* Enable SSBI GPIO 26 as input, use for card detect */ + pinctrl-names = "default"; + pinctrl-0 = <&dragon_sdcc5_pins>, <&dragon_sdcc5_gpios>; + cd-gpios = <&pm8058_gpio 26 GPIO_ACTIVE_LOW>; + wp-gpios = <&tlmm 106 GPIO_ACTIVE_HIGH>; + vmmc-supply = <&pm8058_l14>; + vqmmc-supply = <&dragon_vio_txb>; + }; + }; + }; +}; -- 2.20.1