From 4800599397e2610d4b17a55ef04a16ff3523263d Mon Sep 17 00:00:00 2001 From: Ben Boeckel Date: Fri, 1 Nov 2013 08:53:36 -0400 Subject: [PATCH] smsc9420: replace printk with netdev_ calls Signed-off-by: Ben Boeckel Signed-off-by: David S. Miller --- drivers/net/ethernet/smsc/smsc9420.c | 26 +++++++++++++------------- 1 file changed, 13 insertions(+), 13 deletions(-) diff --git a/drivers/net/ethernet/smsc/smsc9420.c b/drivers/net/ethernet/smsc/smsc9420.c index e55e3365a306..059bcafc5e62 100644 --- a/drivers/net/ethernet/smsc/smsc9420.c +++ b/drivers/net/ethernet/smsc/smsc9420.c @@ -99,17 +99,17 @@ MODULE_PARM_DESC(debug, "debug level"); #define smsc_dbg(TYPE, f, a...) \ do { if ((pd)->msg_enable & NETIF_MSG_##TYPE) \ - printk(KERN_DEBUG PFX f "\n", ## a); \ + netdev_dbg((pd)->dev, PFX f "\n", ## a); \ } while (0) #define smsc_info(TYPE, f, a...) \ do { if ((pd)->msg_enable & NETIF_MSG_##TYPE) \ - printk(KERN_INFO PFX f "\n", ## a); \ + netdev_info((pd)->dev, PFX f "\n", ## a); \ } while (0) #define smsc_warn(TYPE, f, a...) \ do { if ((pd)->msg_enable & NETIF_MSG_##TYPE) \ - printk(KERN_WARNING PFX f "\n", ## a); \ + netdev_warn((pd)->dev, PFX f "\n", ## a); \ } while (0) static inline u32 smsc9420_reg_read(struct smsc9420_pdata *pd, u32 offset) @@ -1168,7 +1168,7 @@ static int smsc9420_mii_probe(struct net_device *dev) /* Device only supports internal PHY at address 1 */ if (!pd->mii_bus->phy_map[1]) { - pr_err("%s: no PHY found at address 1\n", dev->name); + netdev_err(dev, "no PHY found at address 1\n"); return -ENODEV; } @@ -1180,12 +1180,12 @@ static int smsc9420_mii_probe(struct net_device *dev) smsc9420_phy_adjust_link, PHY_INTERFACE_MODE_MII); if (IS_ERR(phydev)) { - pr_err("%s: Could not attach to PHY\n", dev->name); + netdev_err(dev, "Could not attach to PHY\n"); return PTR_ERR(phydev); } - pr_info("%s: attached PHY driver [%s] (mii_bus:phy_addr=%s, irq=%d)\n", - dev->name, phydev->drv->name, dev_name(&phydev->dev), phydev->irq); + netdev_info(dev, "attached PHY driver [%s] (mii_bus:phy_addr=%s, irq=%d)\n", + phydev->drv->name, dev_name(&phydev->dev), phydev->irq); /* mask with MAC supported features */ phydev->supported &= (PHY_BASIC_FEATURES | SUPPORTED_Pause | @@ -1582,12 +1582,12 @@ smsc9420_probe(struct pci_dev *pdev, const struct pci_device_id *id) int result = 0; u32 id_rev; - printk(KERN_INFO DRV_DESCRIPTION " version " DRV_VERSION "\n"); + pr_info(DRV_DESCRIPTION " version " DRV_VERSION "\n"); /* First do the PCI initialisation */ result = pci_enable_device(pdev); if (unlikely(result)) { - printk(KERN_ERR "Cannot enable smsc9420\n"); + pr_err("Cannot enable smsc9420\n"); goto out_0; } @@ -1600,24 +1600,24 @@ smsc9420_probe(struct pci_dev *pdev, const struct pci_device_id *id) SET_NETDEV_DEV(dev, &pdev->dev); if (!(pci_resource_flags(pdev, SMSC_BAR) & IORESOURCE_MEM)) { - printk(KERN_ERR "Cannot find PCI device base address\n"); + netdev_err(dev, "Cannot find PCI device base address\n"); goto out_free_netdev_2; } if ((pci_request_regions(pdev, DRV_NAME))) { - printk(KERN_ERR "Cannot obtain PCI resources, aborting.\n"); + netdev_err(dev, "Cannot obtain PCI resources, aborting.\n"); goto out_free_netdev_2; } if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32))) { - printk(KERN_ERR "No usable DMA configuration, aborting.\n"); + netdev_err(dev, "No usable DMA configuration, aborting.\n"); goto out_free_regions_3; } virt_addr = ioremap(pci_resource_start(pdev, SMSC_BAR), pci_resource_len(pdev, SMSC_BAR)); if (!virt_addr) { - printk(KERN_ERR "Cannot map device registers, aborting.\n"); + netdev_err(dev, "Cannot map device registers, aborting.\n"); goto out_free_regions_3; } -- 2.20.1