From 47c3d19f60da7cc018781744b1ffb3b557373e7f Mon Sep 17 00:00:00 2001 From: Steve Hodgson Date: Sat, 28 Nov 2009 05:34:29 +0000 Subject: [PATCH] sfc: QT202x: Reset before reading PHY id Reading standard registers on the QT2025C before its firmware has booted may cause the boot process to fail. Therefore, follow the recommended reset sequence before reading its id registers. Either order works for the QT2022C2, so don't differentiate. Signed-off-by: Ben Hutchings Signed-off-by: David S. Miller --- drivers/net/sfc/qt202x_phy.c | 22 ++++++++-------------- 1 file changed, 8 insertions(+), 14 deletions(-) diff --git a/drivers/net/sfc/qt202x_phy.c b/drivers/net/sfc/qt202x_phy.c index 1b174c3e6c12..3d7370e39787 100644 --- a/drivers/net/sfc/qt202x_phy.c +++ b/drivers/net/sfc/qt202x_phy.c @@ -138,33 +138,27 @@ static int qt202x_reset_phy(struct efx_nic *efx) static int qt202x_phy_init(struct efx_nic *efx) { struct qt202x_phy_data *phy_data; - u32 devid = efx_mdio_read_id(efx, MDIO_MMD_PHYXS); + u32 devid; int rc; + rc = qt202x_reset_phy(efx); + if (rc) { + EFX_ERR(efx, "PHY init failed\n"); + return rc; + } + phy_data = kzalloc(sizeof(struct qt202x_phy_data), GFP_KERNEL); if (!phy_data) return -ENOMEM; efx->phy_data = phy_data; + devid = efx_mdio_read_id(efx, MDIO_MMD_PHYXS); EFX_INFO(efx, "PHY ID reg %x (OUI %06x model %02x revision %x)\n", devid, efx_mdio_id_oui(devid), efx_mdio_id_model(devid), efx_mdio_id_rev(devid)); phy_data->phy_mode = efx->phy_mode; - - rc = qt202x_reset_phy(efx); - - EFX_INFO(efx, "PHY init %s.\n", - rc ? "failed" : "successful"); - if (rc < 0) - goto fail; - return 0; - - fail: - kfree(efx->phy_data); - efx->phy_data = NULL; - return rc; } static int qt202x_link_ok(struct efx_nic *efx) -- 2.20.1