From 467622ef2acb01986eab37ef96c3632b3ea35999 Mon Sep 17 00:00:00 2001 From: "Eric W. Biederman" Date: Sat, 1 Nov 2008 04:19:11 -0700 Subject: [PATCH] [MTD] [NOR] Fix cfi_send_gen_cmd handling of x16 devices in x8 mode (v4) For "unlock" cycles to 16bit devices in 8bit compatibility mode we need to use the byte addresses 0xaaa and 0x555. These effectively match the word address 0x555 and 0x2aa, except the latter has its low bit set. Most chips don't care about the value of the 'A-1' pin in x8 mode, but some -- like the ST M29W320D -- do. So we need to be careful to set it where appropriate. cfi_send_gen_cmd is only ever passed addresses where the low byte is 0x00, 0x55 or 0xaa. Of those, only addresses ending 0xaa are affected by this patch, by masking in the extra low bit when the device is known to be in compatibility mode. [dwmw2: Do it only when (cmd_ofs & 0xff) == 0xaa] v4: Fix stupid typo in cfi_build_cmd_addr that failed to compile I'm writing this patch way to late at night. v3: Bring all of the work back into cfi_build_cmd_addr including calling of map_bankwidth(map) and cfi_interleave(cfi) So every caller doesn't need to. v2: Only modified the address if we our device_type is larger than our bus width. Cc: stable@kernel.org Signed-off-by: Eric W. Biederman Signed-off-by: David Woodhouse --- drivers/mtd/chips/cfi_cmdset_0002.c | 13 ------------- drivers/mtd/chips/jedec_probe.c | 10 ++++------ include/linux/mtd/cfi.h | 22 +++++++++++++++++++--- 3 files changed, 23 insertions(+), 22 deletions(-) diff --git a/drivers/mtd/chips/cfi_cmdset_0002.c b/drivers/mtd/chips/cfi_cmdset_0002.c index 3e6f5d8609e8..d74ec46aa032 100644 --- a/drivers/mtd/chips/cfi_cmdset_0002.c +++ b/drivers/mtd/chips/cfi_cmdset_0002.c @@ -406,19 +406,6 @@ struct mtd_info *cfi_cmdset_0002(struct map_info *map, int primary) /* Set the default CFI lock/unlock addresses */ cfi->addr_unlock1 = 0x555; cfi->addr_unlock2 = 0x2aa; - /* Modify the unlock address if we are in compatibility mode */ - if ( /* x16 in x8 mode */ - ((cfi->device_type == CFI_DEVICETYPE_X8) && - (cfi->cfiq->InterfaceDesc == - CFI_INTERFACE_X8_BY_X16_ASYNC)) || - /* x32 in x16 mode */ - ((cfi->device_type == CFI_DEVICETYPE_X16) && - (cfi->cfiq->InterfaceDesc == - CFI_INTERFACE_X16_BY_X32_ASYNC))) - { - cfi->addr_unlock1 = 0xaaa; - cfi->addr_unlock2 = 0x555; - } } /* CFI mode */ else if (cfi->cfi_mode == CFI_MODE_JEDEC) { diff --git a/drivers/mtd/chips/jedec_probe.c b/drivers/mtd/chips/jedec_probe.c index f84ab6182148..2f3f2f719ba4 100644 --- a/drivers/mtd/chips/jedec_probe.c +++ b/drivers/mtd/chips/jedec_probe.c @@ -1808,9 +1808,7 @@ static inline u32 jedec_read_mfr(struct map_info *map, uint32_t base, * several first banks can contain 0x7f instead of actual ID */ do { - uint32_t ofs = cfi_build_cmd_addr(0 + (bank << 8), - cfi_interleave(cfi), - cfi->device_type); + uint32_t ofs = cfi_build_cmd_addr(0 + (bank << 8), map, cfi); mask = (1 << (cfi->device_type * 8)) - 1; result = map_read(map, base + ofs); bank++; @@ -1824,7 +1822,7 @@ static inline u32 jedec_read_id(struct map_info *map, uint32_t base, { map_word result; unsigned long mask; - u32 ofs = cfi_build_cmd_addr(1, cfi_interleave(cfi), cfi->device_type); + u32 ofs = cfi_build_cmd_addr(1, map, cfi); mask = (1 << (cfi->device_type * 8)) -1; result = map_read(map, base + ofs); return result.x[0] & mask; @@ -2067,8 +2065,8 @@ static int jedec_probe_chip(struct map_info *map, __u32 base, } /* Ensure the unlock addresses we try stay inside the map */ - probe_offset1 = cfi_build_cmd_addr(cfi->addr_unlock1, cfi_interleave(cfi), cfi->device_type); - probe_offset2 = cfi_build_cmd_addr(cfi->addr_unlock2, cfi_interleave(cfi), cfi->device_type); + probe_offset1 = cfi_build_cmd_addr(cfi->addr_unlock1, map, cfi); + probe_offset2 = cfi_build_cmd_addr(cfi->addr_unlock2, map, cfi); if ( ((base + probe_offset1 + map_bankwidth(map)) >= map->size) || ((base + probe_offset2 + map_bankwidth(map)) >= map->size)) goto retry; diff --git a/include/linux/mtd/cfi.h b/include/linux/mtd/cfi.h index ee5124ec319e..00e2b575021f 100644 --- a/include/linux/mtd/cfi.h +++ b/include/linux/mtd/cfi.h @@ -282,9 +282,25 @@ struct cfi_private { /* * Returns the command address according to the given geometry. */ -static inline uint32_t cfi_build_cmd_addr(uint32_t cmd_ofs, int interleave, int type) +static inline uint32_t cfi_build_cmd_addr(uint32_t cmd_ofs, + struct map_info *map, struct cfi_private *cfi) { - return (cmd_ofs * type) * interleave; + unsigned bankwidth = map_bankwidth(map); + unsigned interleave = cfi_interleave(cfi); + unsigned type = cfi->device_type; + uint32_t addr; + + addr = (cmd_ofs * type) * interleave; + + /* Modify the unlock address if we are in compatiblity mode. + * For 16bit devices on 8 bit busses + * and 32bit devices on 16 bit busses + * set the low bit of the alternating bit sequence of the address. + */ + if (((type * interleave) > bankwidth) && ((uint8_t)cmd_ofs == 0xaa)) + addr |= (type >> 1)*interleave; + + return addr; } /* @@ -430,7 +446,7 @@ static inline uint32_t cfi_send_gen_cmd(u_char cmd, uint32_t cmd_addr, uint32_t int type, map_word *prev_val) { map_word val; - uint32_t addr = base + cfi_build_cmd_addr(cmd_addr, cfi_interleave(cfi), type); + uint32_t addr = base + cfi_build_cmd_addr(cmd_addr, map, cfi); val = cfi_build_cmd(cmd, map, cfi); if (prev_val) -- 2.20.1