From 466026989f112e0546ca39ab00a759af82dbe83a Mon Sep 17 00:00:00 2001 From: Bing Zhao Date: Tue, 26 Feb 2013 12:58:35 -0800 Subject: [PATCH] libertas: fix crash for SD8688 For SD8688, FUNC_INIT command is queued before fw_ready flag is set. This causes the following crash as lbs_thread blocks any command if fw_ready is not set. [ 209.338953] [] (__schedule+0x610/0x764) from [] (__lbs_cmd+0xb8/0x130 [libertas]) [ 209.348340] [] (__lbs_cmd+0xb8/0x130 [libertas]) from [] (if_sdio_finish_power_on+0xec/0x1b0 [libertas_sdio]) [ 209.360136] [] (if_sdio_finish_power_on+0xec/0x1b0 [libertas_sdio]) from [] (if_sdio_power_on+0x18c/0x20c [libertas_sdio]) [ 209.373052] [] (if_sdio_power_on+0x18c/0x20c [libertas_sdio]) from [] (if_sdio_probe+0x200/0x31c [libertas_sdio]) [ 209.385316] [] (if_sdio_probe+0x200/0x31c [libertas_sdio]) from [] (sdio_bus_probe+0x94/0xfc [mmc_core]) [ 209.396748] [] (sdio_bus_probe+0x94/0xfc [mmc_core]) from [] (driver_probe_device+0x12c/0x348) [ 209.407214] [] (driver_probe_device+0x12c/0x348) from [] (__driver_attach+0x78/0x9c) [ 209.416798] [] (__driver_attach+0x78/0x9c) from [] (bus_for_each_dev+0x50/0x88) [ 209.425946] [] (bus_for_each_dev+0x50/0x88) from [] (bus_add_driver+0x108/0x268) [ 209.435180] [] (bus_add_driver+0x108/0x268) from [] (driver_register+0xa4/0x134) [ 209.444426] [] (driver_register+0xa4/0x134) from [] (if_sdio_init_module+0x1c/0x3c [libertas_sdio]) [ 209.455339] [] (if_sdio_init_module+0x1c/0x3c [libertas_sdio]) from [] (do_one_initcall+0x98/0x174) [ 209.466236] [] (do_one_initcall+0x98/0x174) from [] (load_module+0x1c5c/0x1f80) [ 209.475390] [] (load_module+0x1c5c/0x1f80) from [] (sys_init_module+0x104/0x128) [ 209.484632] [] (sys_init_module+0x104/0x128) from [] (ret_fast_syscall+0x0/0x38) Fix it by setting fw_ready flag prior to queuing FUNC_INIT command. Cc: # 3.5+ Reported-by: Lubomir Rintel Tested-by: Lubomir Rintel Signed-off-by: Bing Zhao Signed-off-by: John W. Linville --- drivers/net/wireless/libertas/if_sdio.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/net/wireless/libertas/if_sdio.c b/drivers/net/wireless/libertas/if_sdio.c index 739309e70d8b..45578335e420 100644 --- a/drivers/net/wireless/libertas/if_sdio.c +++ b/drivers/net/wireless/libertas/if_sdio.c @@ -825,6 +825,11 @@ static void if_sdio_finish_power_on(struct if_sdio_card *card) sdio_release_host(func); + /* Set fw_ready before queuing any commands so that + * lbs_thread won't block from sending them to firmware. + */ + priv->fw_ready = 1; + /* * FUNC_INIT is required for SD8688 WLAN/BT multiple functions */ @@ -839,7 +844,6 @@ static void if_sdio_finish_power_on(struct if_sdio_card *card) netdev_alert(priv->dev, "CMD_FUNC_INIT cmd failed\n"); } - priv->fw_ready = 1; wake_up(&card->pwron_waitq); if (!card->started) { -- 2.20.1