From 461c317705eca5cac09a360f488715927fd0a927 Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Wed, 11 Aug 2010 13:02:32 +0300 Subject: [PATCH] USB: otg: twl4030: fix wrong assumption of starting state The reset state of twl4030-usb is not sleeping, it starts up awaken and we need to disable it if we have booted with a disconnected cable to avoid over consumption on the default state. To avoid problems later, we read the current state of the transceiver from the PHY_PWR_CTRL register. The bootloader can, anyways, put the device to sleep before us. Tested on a custom OMAP board. Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman --- drivers/usb/otg/twl4030-usb.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/usb/otg/twl4030-usb.c b/drivers/usb/otg/twl4030-usb.c index 0e8888588d4e..05aaac1c3861 100644 --- a/drivers/usb/otg/twl4030-usb.c +++ b/drivers/usb/otg/twl4030-usb.c @@ -550,6 +550,7 @@ static int __devinit twl4030_usb_probe(struct platform_device *pdev) struct twl4030_usb_data *pdata = pdev->dev.platform_data; struct twl4030_usb *twl; int status, err; + u8 pwr; if (!pdata) { dev_dbg(&pdev->dev, "platform_data not available\n"); @@ -568,7 +569,10 @@ static int __devinit twl4030_usb_probe(struct platform_device *pdev) twl->otg.set_peripheral = twl4030_set_peripheral; twl->otg.set_suspend = twl4030_set_suspend; twl->usb_mode = pdata->usb_mode; - twl->asleep = 1; + + pwr = twl4030_usb_read(twl, PHY_PWR_CTRL); + + twl->asleep = (pwr & PHY_PWR_PHYPWD); /* init spinlock for workqueue */ spin_lock_init(&twl->lock); -- 2.20.1