From 44e645faffa7428502712cc6062a92a07ae09679 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Mon, 15 Aug 2016 13:47:33 -0300 Subject: [PATCH] ARM: dts: imx7s-warp: Add Wifi support Warp7 has a BCM43430 Wifi chip connected to the USDHC1 port. Add support for it. Signed-off-by: Fabio Estevam Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx7s-warp.dts | 41 ++++++++++++++++++++++++++++++++ 1 file changed, 41 insertions(+) diff --git a/arch/arm/boot/dts/imx7s-warp.dts b/arch/arm/boot/dts/imx7s-warp.dts index f819003f2d4a..4d4959c856a9 100644 --- a/arch/arm/boot/dts/imx7s-warp.dts +++ b/arch/arm/boot/dts/imx7s-warp.dts @@ -54,6 +54,18 @@ reg = <0x80000000 0x20000000>; }; + reg_brcm: regulator-brcm { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio5 10 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_brcm_reg>; + regulator-name = "brcm_reg"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + startup-delay-us = <200000>; + }; + sound { compatible = "simple-audio-card"; simple-audio-card,name = "imx7-sgtl5000"; @@ -221,6 +233,17 @@ status = "okay"; }; +&usdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc1>; + bus-width = <4>; + keep-power-in-suspend; + no-1-8-v; + non-removable; + vmmc-supply = <®_brcm>; + status = "okay"; +}; + &usdhc3 { pinctrl-names = "default", "state_100mhz", "state_200mhz"; pinctrl-0 = <&pinctrl_usdhc3>; @@ -235,6 +258,12 @@ }; &iomuxc { + pinctrl_brcm_reg: brcmreggrp { + fsl,pins = < + MX7D_PAD_SD2_WP__GPIO5_IO10 0x14 /* WL_REG_ON */ + >; + }; + pinctrl_i2c1: i2c1grp { fsl,pins = < MX7D_PAD_I2C1_SDA__I2C1_SDA 0x4000007f @@ -266,6 +295,18 @@ >; }; + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX7D_PAD_SD1_CMD__SD1_CMD 0x59 + MX7D_PAD_SD1_CLK__SD1_CLK 0x19 + MX7D_PAD_SD1_DATA0__SD1_DATA0 0x59 + MX7D_PAD_SD1_DATA1__SD1_DATA1 0x59 + MX7D_PAD_SD1_DATA2__SD1_DATA2 0x59 + MX7D_PAD_SD1_DATA3__SD1_DATA3 0x59 + MX7D_PAD_SD2_RESET_B__GPIO5_IO11 0x14 /* WL_HOST_WAKE */ + >; + }; + pinctrl_usdhc3: usdhc3grp { fsl,pins = < MX7D_PAD_SD3_CMD__SD3_CMD 0x59 -- 2.20.1