From 42568dd5d3b5bff18d9dbc6f2f2814ed28753ada Mon Sep 17 00:00:00 2001 From: Patrik Jakobsson Date: Wed, 10 Jul 2013 18:44:25 +0200 Subject: [PATCH] drm/gma500/psb: Convert to gma_crtc_dpms() Signed-off-by: Patrik Jakobsson --- drivers/gpu/drm/gma500/psb_intel_display.c | 104 +-------------------- 1 file changed, 1 insertion(+), 103 deletions(-) diff --git a/drivers/gpu/drm/gma500/psb_intel_display.c b/drivers/gpu/drm/gma500/psb_intel_display.c index 940c6f2fb8ee..b52bde2a0fe9 100644 --- a/drivers/gpu/drm/gma500/psb_intel_display.c +++ b/drivers/gpu/drm/gma500/psb_intel_display.c @@ -82,108 +82,6 @@ static void psb_intel_clock(int refclk, struct gma_clock_t *clock) clock->dot = clock->vco / clock->p; } -/** - * Sets the power management mode of the pipe and plane. - * - * This code should probably grow support for turning the cursor off and back - * on appropriately at the same time as we're turning the pipe off/on. - */ -static void psb_intel_crtc_dpms(struct drm_crtc *crtc, int mode) -{ - struct drm_device *dev = crtc->dev; - struct drm_psb_private *dev_priv = dev->dev_private; - struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(crtc); - int pipe = psb_intel_crtc->pipe; - const struct psb_offset *map = &dev_priv->regmap[pipe]; - u32 temp; - - /* XXX: When our outputs are all unaware of DPMS modes other than off - * and on, we should map those modes to DRM_MODE_DPMS_OFF in the CRTC. - */ - switch (mode) { - case DRM_MODE_DPMS_ON: - case DRM_MODE_DPMS_STANDBY: - case DRM_MODE_DPMS_SUSPEND: - /* Enable the DPLL */ - temp = REG_READ(map->dpll); - if ((temp & DPLL_VCO_ENABLE) == 0) { - REG_WRITE(map->dpll, temp); - REG_READ(map->dpll); - /* Wait for the clocks to stabilize. */ - udelay(150); - REG_WRITE(map->dpll, temp | DPLL_VCO_ENABLE); - REG_READ(map->dpll); - /* Wait for the clocks to stabilize. */ - udelay(150); - REG_WRITE(map->dpll, temp | DPLL_VCO_ENABLE); - REG_READ(map->dpll); - /* Wait for the clocks to stabilize. */ - udelay(150); - } - - /* Enable the pipe */ - temp = REG_READ(map->conf); - if ((temp & PIPEACONF_ENABLE) == 0) - REG_WRITE(map->conf, temp | PIPEACONF_ENABLE); - - /* Enable the plane */ - temp = REG_READ(map->cntr); - if ((temp & DISPLAY_PLANE_ENABLE) == 0) { - REG_WRITE(map->cntr, - temp | DISPLAY_PLANE_ENABLE); - /* Flush the plane changes */ - REG_WRITE(map->base, REG_READ(map->base)); - } - - gma_crtc_load_lut(crtc); - - /* Give the overlay scaler a chance to enable - * if it's on this pipe */ - /* psb_intel_crtc_dpms_video(crtc, true); TODO */ - break; - case DRM_MODE_DPMS_OFF: - /* Give the overlay scaler a chance to disable - * if it's on this pipe */ - /* psb_intel_crtc_dpms_video(crtc, FALSE); TODO */ - - /* Disable the VGA plane that we never use */ - REG_WRITE(VGACNTRL, VGA_DISP_DISABLE); - - /* Disable display plane */ - temp = REG_READ(map->cntr); - if ((temp & DISPLAY_PLANE_ENABLE) != 0) { - REG_WRITE(map->cntr, - temp & ~DISPLAY_PLANE_ENABLE); - /* Flush the plane changes */ - REG_WRITE(map->base, REG_READ(map->base)); - REG_READ(map->base); - } - - /* Next, disable display pipes */ - temp = REG_READ(map->conf); - if ((temp & PIPEACONF_ENABLE) != 0) { - REG_WRITE(map->conf, temp & ~PIPEACONF_ENABLE); - REG_READ(map->conf); - } - - /* Wait for vblank for the disable to take effect. */ - gma_wait_for_vblank(dev); - - temp = REG_READ(map->dpll); - if ((temp & DPLL_VCO_ENABLE) != 0) { - REG_WRITE(map->dpll, temp & ~DPLL_VCO_ENABLE); - REG_READ(map->dpll); - } - - /* Wait for the clocks to turn off. */ - udelay(150); - break; - } - - /*Set FIFO Watermarks*/ - REG_WRITE(DSPARB, 0x3F3E); -} - void psb_intel_encoder_prepare(struct drm_encoder *encoder) { struct drm_encoder_helper_funcs *encoder_funcs = @@ -850,7 +748,7 @@ static void psb_intel_crtc_destroy(struct drm_crtc *crtc) } const struct drm_crtc_helper_funcs psb_intel_helper_funcs = { - .dpms = psb_intel_crtc_dpms, + .dpms = gma_crtc_dpms, .mode_fixup = gma_crtc_mode_fixup, .mode_set = psb_intel_crtc_mode_set, .mode_set_base = gma_pipe_set_base, -- 2.20.1