From 4196dd6baabccdef3786c1d51d75e041313af848 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Mon, 25 Sep 2006 12:41:38 +0300 Subject: [PATCH] ARM: OMAP: Reset GPIO irq state after free_irq() This is needed to reset GPIO after free_irq(). Signed-off-by: Tony Lindgren --- arch/arm/plat-omap/gpio.c | 25 +++++++++++++++++++++---- 1 file changed, 21 insertions(+), 4 deletions(-) diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c index b27ba0ee00fb..96d754833704 100644 --- a/arch/arm/plat-omap/gpio.c +++ b/arch/arm/plat-omap/gpio.c @@ -662,6 +662,14 @@ static int _set_gpio_wakeup(struct gpio_bank *bank, int gpio, int enable) } } +static void _reset_gpio(struct gpio_bank *bank, int gpio) +{ + _set_gpio_direction(bank, get_gpio_index(gpio), 1); + _set_gpio_irqenable(bank, gpio, 0); + _clear_gpio_irqstatus(bank, gpio); + _set_gpio_triggering(bank, get_gpio_index(gpio), IRQT_NOEDGE); +} + /* Use disable_irq_wake() and enable_irq_wake() functions from drivers */ static int gpio_wake_enable(unsigned int irq, unsigned int enable) { @@ -696,7 +704,9 @@ int omap_request_gpio(int gpio) } bank->reserved_map |= (1 << get_gpio_index(gpio)); - /* Set trigger to none. You need to enable the trigger after request_irq */ + /* Set trigger to none. You need to enable the desired trigger with + * request_irq() or set_irq_type(). + */ _set_gpio_triggering(bank, get_gpio_index(gpio), IRQT_NOEDGE); #ifdef CONFIG_ARCH_OMAP15XX @@ -756,9 +766,7 @@ void omap_free_gpio(int gpio) } #endif bank->reserved_map &= ~(1 << get_gpio_index(gpio)); - _set_gpio_direction(bank, get_gpio_index(gpio), 1); - _set_gpio_irqenable(bank, gpio, 0); - _clear_gpio_irqstatus(bank, gpio); + _reset_gpio(bank, gpio); spin_unlock(&bank->lock); } @@ -898,6 +906,14 @@ static void gpio_irq_handler(unsigned int irq, struct irqdesc *desc, } +static void gpio_irq_shutdown(unsigned int irq) +{ + unsigned int gpio = irq - IH_GPIO_BASE; + struct gpio_bank *bank = get_gpio_bank(gpio); + + _reset_gpio(bank, gpio); +} + static void gpio_ack_irq(unsigned int irq) { unsigned int gpio = irq - IH_GPIO_BASE; @@ -946,6 +962,7 @@ static void mpuio_unmask_irq(unsigned int irq) static struct irq_chip gpio_irq_chip = { .name = "GPIO", + .shutdown = gpio_irq_shutdown, .ack = gpio_ack_irq, .mask = gpio_mask_irq, .unmask = gpio_unmask_irq, -- 2.20.1