From 40b5cda28aafe3744d8808c21f7959e472a9ecb1 Mon Sep 17 00:00:00 2001 From: Grant Coady Date: Sat, 30 Apr 2005 21:41:29 +1000 Subject: [PATCH] [PATCH] I2C: add new hardware monitor driver: adm9240 Completion of Michiel Rook's port of adm9240 to 2.6 with addition of auto fan clock divider based on Jean Delvare's algorithm, and replaces scaling macros with static inlines. Signed-off-by: Grant Coady Signed-off-by: Greg Kroah-Hartman --- drivers/i2c/chips/Kconfig | 11 + drivers/i2c/chips/Makefile | 1 + drivers/i2c/chips/adm9240.c | 768 ++++++++++++++++++++++++++++++++++++ 3 files changed, 780 insertions(+) create mode 100644 drivers/i2c/chips/adm9240.c diff --git a/drivers/i2c/chips/Kconfig b/drivers/i2c/chips/Kconfig index 67be4c988ca..3c8863f26c7 100644 --- a/drivers/i2c/chips/Kconfig +++ b/drivers/i2c/chips/Kconfig @@ -51,6 +51,17 @@ config SENSORS_ADM1031 This driver can also be built as a module. If so, the module will be called adm1031. +config SENSORS_ADM9240 + tristate "Analog Devices ADM9240 and compatibles" + depends on I2C && EXPERIMENTAL + select I2C_SENSOR + help + If you say yes here you get support for Analog Devices ADM9240, + Dallas DS1780, National Semiconductor LM81 sensor chips. + + This driver can also be built as a module. If so, the module + will be called adm9240. + config SENSORS_ASB100 tristate "Asus ASB100 Bach" depends on I2C && EXPERIMENTAL diff --git a/drivers/i2c/chips/Makefile b/drivers/i2c/chips/Makefile index 6fadd78f9cf..247fc982a6d 100644 --- a/drivers/i2c/chips/Makefile +++ b/drivers/i2c/chips/Makefile @@ -11,6 +11,7 @@ obj-$(CONFIG_SENSORS_ADM1021) += adm1021.o obj-$(CONFIG_SENSORS_ADM1025) += adm1025.o obj-$(CONFIG_SENSORS_ADM1026) += adm1026.o obj-$(CONFIG_SENSORS_ADM1031) += adm1031.o +obj-$(CONFIG_SENSORS_ADM9240) += adm9240.o obj-$(CONFIG_SENSORS_ATXP1) += atxp1.o obj-$(CONFIG_SENSORS_DS1337) += ds1337.o obj-$(CONFIG_SENSORS_DS1621) += ds1621.o diff --git a/drivers/i2c/chips/adm9240.c b/drivers/i2c/chips/adm9240.c new file mode 100644 index 00000000000..0b67eab15d2 --- /dev/null +++ b/drivers/i2c/chips/adm9240.c @@ -0,0 +1,768 @@ +/* + * adm9240.c Part of lm_sensors, Linux kernel modules for hardware + * monitoring + * + * Copyright (C) 1999 Frodo Looijaard + * Philip Edelbrock + * Copyright (C) 2003 Michiel Rook + * Copyright (C) 2005 Grant Coady with valuable + * guidance from Jean Delvare + * + * Driver supports Analog Devices ADM9240 + * Dallas Semiconductor DS1780 + * National Semiconductor LM81 + * + * ADM9240 is the reference, DS1780 and LM81 are register compatibles + * + * Voltage Six inputs are scaled by chip, VID also reported + * Temperature Chip temperature to 0.5'C, maximum and max_hysteris + * Fans 2 fans, low speed alarm, automatic fan clock divider + * Alarms 16-bit map of active alarms + * Analog Out 0..1250 mV output + * + * Chassis Intrusion: clear CI latch with 'echo 1 > chassis_clear' + * + * Test hardware: Intel SE440BX-2 desktop motherboard --Grant + * + * LM81 extended temp reading not implemented + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include +#include +#include + +/* Addresses to scan */ +static unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, 0x2f, + I2C_CLIENT_END }; + +static unsigned int normal_isa[] = { I2C_CLIENT_ISA_END }; + +/* Insmod parameters */ +SENSORS_INSMOD_3(adm9240, ds1780, lm81); + +/* ADM9240 registers */ +#define ADM9240_REG_MAN_ID 0x3e +#define ADM9240_REG_DIE_REV 0x3f +#define ADM9240_REG_CONFIG 0x40 + +#define ADM9240_REG_IN(nr) (0x20 + (nr)) /* 0..5 */ +#define ADM9240_REG_IN_MAX(nr) (0x2b + (nr) * 2) +#define ADM9240_REG_IN_MIN(nr) (0x2c + (nr) * 2) +#define ADM9240_REG_FAN(nr) (0x28 + (nr)) /* 0..1 */ +#define ADM9240_REG_FAN_MIN(nr) (0x3b + (nr)) +#define ADM9240_REG_INT(nr) (0x41 + (nr)) +#define ADM9240_REG_INT_MASK(nr) (0x43 + (nr)) +#define ADM9240_REG_TEMP 0x27 +#define ADM9240_REG_TEMP_HIGH 0x39 +#define ADM9240_REG_TEMP_HYST 0x3a +#define ADM9240_REG_ANALOG_OUT 0x19 +#define ADM9240_REG_CHASSIS_CLEAR 0x46 +#define ADM9240_REG_VID_FAN_DIV 0x47 +#define ADM9240_REG_I2C_ADDR 0x48 +#define ADM9240_REG_VID4 0x49 +#define ADM9240_REG_TEMP_CONF 0x4b + +/* generalised scaling with integer rounding */ +static inline int SCALE(long val, int mul, int div) +{ + if (val < 0) + return (val * mul - div / 2) / div; + else + return (val * mul + div / 2) / div; +} + +/* adm9240 internally scales voltage measurements */ +static const u16 nom_mv[] = { 2500, 2700, 3300, 5000, 12000, 2700 }; + +static inline unsigned int IN_FROM_REG(u8 reg, int n) +{ + return SCALE(reg, nom_mv[n], 192); +} + +static inline u8 IN_TO_REG(unsigned long val, int n) +{ + return SENSORS_LIMIT(SCALE(val, 192, nom_mv[n]), 0, 255); +} + +/* temperature range: -40..125, 127 disables temperature alarm */ +static inline s8 TEMP_TO_REG(long val) +{ + return SENSORS_LIMIT(SCALE(val, 1, 1000), -40, 127); +} + +/* two fans, each with low fan speed limit */ +static inline unsigned int FAN_FROM_REG(u8 reg, u8 div) +{ + if (!reg) /* error */ + return -1; + + if (reg == 255) + return 0; + + return SCALE(1350000, 1, reg * div); +} + +/* analog out 0..1250mV */ +static inline u8 AOUT_TO_REG(unsigned long val) +{ + return SENSORS_LIMIT(SCALE(val, 255, 1250), 0, 255); +} + +static inline unsigned int AOUT_FROM_REG(u8 reg) +{ + return SCALE(reg, 1250, 255); +} + +static int adm9240_attach_adapter(struct i2c_adapter *adapter); +static int adm9240_detect(struct i2c_adapter *adapter, int address, int kind); +static void adm9240_init_client(struct i2c_client *client); +static int adm9240_detach_client(struct i2c_client *client); +static struct adm9240_data *adm9240_update_device(struct device *dev); + +/* driver data */ +static struct i2c_driver adm9240_driver = { + .owner = THIS_MODULE, + .name = "adm9240", + .id = I2C_DRIVERID_ADM9240, + .flags = I2C_DF_NOTIFY, + .attach_adapter = adm9240_attach_adapter, + .detach_client = adm9240_detach_client, +}; + +/* per client data */ +struct adm9240_data { + enum chips type; + struct i2c_client client; + struct semaphore update_lock; + char valid; + unsigned long last_updated_measure; + unsigned long last_updated_config; + + u8 in[6]; /* ro in0_input */ + u8 in_max[6]; /* rw in0_max */ + u8 in_min[6]; /* rw in0_min */ + u8 fan[2]; /* ro fan1_input */ + u8 fan_min[2]; /* rw fan1_min */ + u8 fan_div[2]; /* rw fan1_div, read-only accessor */ + s16 temp; /* ro temp1_input, 9-bit sign-extended */ + s8 temp_high; /* rw temp1_max */ + s8 temp_hyst; /* rw temp1_max_hyst */ + u16 alarms; /* ro alarms */ + u8 aout; /* rw analog_out */ + u8 vid; /* ro vid */ + u8 vrm; /* -- vrm set on startup, no accessor */ +}; + +/* i2c byte read/write interface */ +static int adm9240_read_value(struct i2c_client *client, u8 reg) +{ + return i2c_smbus_read_byte_data(client, reg); +} + +static int adm9240_write_value(struct i2c_client *client, u8 reg, u8 value) +{ + return i2c_smbus_write_byte_data(client, reg, value); +} + +/*** sysfs accessors ***/ + +/* temperature */ +#define show_temp(value, scale) \ +static ssize_t show_##value(struct device *dev, char *buf) \ +{ \ + struct adm9240_data *data = adm9240_update_device(dev); \ + return sprintf(buf, "%d\n", data->value * scale); \ +} +show_temp(temp_high, 1000); +show_temp(temp_hyst, 1000); +show_temp(temp, 500); + +#define set_temp(value, reg) \ +static ssize_t set_##value(struct device *dev, const char *buf, \ + size_t count) \ +{ \ + struct i2c_client *client = to_i2c_client(dev); \ + struct adm9240_data *data = adm9240_update_device(dev); \ + long temp = simple_strtoul(buf, NULL, 10); \ + \ + down(&data->update_lock); \ + data->value = TEMP_TO_REG(temp); \ + adm9240_write_value(client, reg, data->value); \ + up(&data->update_lock); \ + return count; \ +} + +set_temp(temp_high, ADM9240_REG_TEMP_HIGH); +set_temp(temp_hyst, ADM9240_REG_TEMP_HYST); + +static DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO, + show_temp_high, set_temp_high); +static DEVICE_ATTR(temp1_max_hyst, S_IWUSR | S_IRUGO, + show_temp_hyst, set_temp_hyst); +static DEVICE_ATTR(temp1_input, S_IRUGO, show_temp, NULL); + +/* voltage */ +static ssize_t show_in(struct device *dev, char *buf, int nr) +{ + struct adm9240_data *data = adm9240_update_device(dev); + return sprintf(buf, "%d\n", IN_FROM_REG(data->in[nr], nr)); +} + +static ssize_t show_in_min(struct device *dev, char *buf, int nr) +{ + struct adm9240_data *data = adm9240_update_device(dev); + return sprintf(buf, "%d\n", IN_FROM_REG(data->in_min[nr], nr)); +} + +static ssize_t show_in_max(struct device *dev, char *buf, int nr) +{ + struct adm9240_data *data = adm9240_update_device(dev); + return sprintf(buf, "%d\n", IN_FROM_REG(data->in_max[nr], nr)); +} + +static ssize_t set_in_min(struct device *dev, const char *buf, + size_t count, int nr) +{ + struct i2c_client *client = to_i2c_client(dev); + struct adm9240_data *data = i2c_get_clientdata(client); + unsigned long val = simple_strtoul(buf, NULL, 10); + + down(&data->update_lock); + data->in_min[nr] = IN_TO_REG(val, nr); + adm9240_write_value(client, ADM9240_REG_IN_MIN(nr), data->in_min[nr]); + up(&data->update_lock); + return count; +} + +static ssize_t set_in_max(struct device *dev, const char *buf, + size_t count, int nr) +{ + struct i2c_client *client = to_i2c_client(dev); + struct adm9240_data *data = i2c_get_clientdata(client); + unsigned long val = simple_strtoul(buf, NULL, 10); + + down(&data->update_lock); + data->in_max[nr] = IN_TO_REG(val, nr); + adm9240_write_value(client, ADM9240_REG_IN_MAX(nr), data->in_max[nr]); + up(&data->update_lock); + return count; +} + +#define show_in_offset(offset) \ +static ssize_t show_in##offset(struct device *dev, char *buf) \ +{ \ + return show_in(dev, buf, offset); \ +} \ +static DEVICE_ATTR(in##offset##_input, S_IRUGO, show_in##offset, NULL); \ +static ssize_t show_in##offset##_min(struct device *dev, char *buf) \ +{ \ + return show_in_min(dev, buf, offset); \ +} \ +static ssize_t show_in##offset##_max(struct device *dev, char *buf) \ +{ \ + return show_in_max(dev, buf, offset); \ +} \ +static ssize_t \ +set_in##offset##_min(struct device *dev, const char *buf, size_t count) \ +{ \ + return set_in_min(dev, buf, count, offset); \ +} \ +static ssize_t \ +set_in##offset##_max(struct device *dev, const char *buf, size_t count) \ +{ \ + return set_in_max(dev, buf, count, offset); \ +} \ +static DEVICE_ATTR(in##offset##_min, S_IRUGO | S_IWUSR, \ + show_in##offset##_min, set_in##offset##_min); \ +static DEVICE_ATTR(in##offset##_max, S_IRUGO | S_IWUSR, \ + show_in##offset##_max, set_in##offset##_max); + +show_in_offset(0); +show_in_offset(1); +show_in_offset(2); +show_in_offset(3); +show_in_offset(4); +show_in_offset(5); + +/* fans */ +static ssize_t show_fan(struct device *dev, char *buf, int nr) +{ + struct adm9240_data *data = adm9240_update_device(dev); + return sprintf(buf, "%d\n", FAN_FROM_REG(data->fan[nr], + 1 << data->fan_div[nr])); +} + +static ssize_t show_fan_min(struct device *dev, char *buf, int nr) +{ + struct adm9240_data *data = adm9240_update_device(dev); + return sprintf(buf, "%d\n", FAN_FROM_REG(data->fan_min[nr], + 1 << data->fan_div[nr])); +} + +static ssize_t show_fan_div(struct device *dev, char *buf, int nr) +{ + struct adm9240_data *data = adm9240_update_device(dev); + return sprintf(buf, "%d\n", 1 << data->fan_div[nr]); +} + +/* write new fan div, callers must hold data->update_lock */ +static void adm9240_write_fan_div(struct i2c_client *client, int nr, + u8 fan_div) +{ + u8 reg, old, shift = (nr + 2) * 2; + + reg = adm9240_read_value(client, ADM9240_REG_VID_FAN_DIV); + old = (reg >> shift) & 3; + reg &= ~(3 << shift); + reg |= (fan_div << shift); + adm9240_write_value(client, ADM9240_REG_VID_FAN_DIV, reg); + dev_dbg(&client->dev, "fan%d clock divider changed from %u " + "to %u\n", nr + 1, 1 << old, 1 << fan_div); +} + +/* + * set fan speed low limit: + * + * - value is zero: disable fan speed low limit alarm + * + * - value is below fan speed measurement range: enable fan speed low + * limit alarm to be asserted while fan speed too slow to measure + * + * - otherwise: select fan clock divider to suit fan speed low limit, + * measurement code may adjust registers to ensure fan speed reading + */ +static ssize_t set_fan_min(struct device *dev, const char *buf, + size_t count, int nr) +{ + struct i2c_client *client = to_i2c_client(dev); + struct adm9240_data *data = i2c_get_clientdata(client); + unsigned long val = simple_strtoul(buf, NULL, 10); + u8 new_div; + + down(&data->update_lock); + + if (!val) { + data->fan_min[nr] = 255; + new_div = data->fan_div[nr]; + + dev_dbg(&client->dev, "fan%u low limit set disabled\n", + nr + 1); + + } else if (val < 1350000 / (8 * 254)) { + new_div = 3; + data->fan_min[nr] = 254; + + dev_dbg(&client->dev, "fan%u low limit set minimum %u\n", + nr + 1, FAN_FROM_REG(254, 1 << new_div)); + + } else { + unsigned int new_min = 1350000 / val; + + new_div = 0; + while (new_min > 192 && new_div < 3) { + new_div++; + new_min /= 2; + } + if (!new_min) /* keep > 0 */ + new_min++; + + data->fan_min[nr] = new_min; + + dev_dbg(&client->dev, "fan%u low limit set fan speed %u\n", + nr + 1, FAN_FROM_REG(new_min, 1 << new_div)); + } + + if (new_div != data->fan_div[nr]) { + data->fan_div[nr] = new_div; + adm9240_write_fan_div(client, nr, new_div); + } + adm9240_write_value(client, ADM9240_REG_FAN_MIN(nr), + data->fan_min[nr]); + + up(&data->update_lock); + return count; +} + +#define show_fan_offset(offset) \ +static ssize_t show_fan_##offset (struct device *dev, char *buf) \ +{ \ +return show_fan(dev, buf, offset - 1); \ +} \ +static ssize_t show_fan_##offset##_div (struct device *dev, char *buf) \ +{ \ +return show_fan_div(dev, buf, offset - 1); \ +} \ +static ssize_t show_fan_##offset##_min (struct device *dev, char *buf) \ +{ \ +return show_fan_min(dev, buf, offset - 1); \ +} \ +static ssize_t set_fan_##offset##_min (struct device *dev, \ +const char *buf, size_t count) \ +{ \ +return set_fan_min(dev, buf, count, offset - 1); \ +} \ +static DEVICE_ATTR(fan##offset##_input, S_IRUGO, \ + show_fan_##offset, NULL); \ +static DEVICE_ATTR(fan##offset##_div, S_IRUGO, \ + show_fan_##offset##_div, NULL); \ +static DEVICE_ATTR(fan##offset##_min, S_IRUGO | S_IWUSR, \ + show_fan_##offset##_min, set_fan_##offset##_min); + +show_fan_offset(1); +show_fan_offset(2); + +/* alarms */ +static ssize_t show_alarms(struct device *dev, char *buf) +{ + struct adm9240_data *data = adm9240_update_device(dev); + return sprintf(buf, "%u\n", data->alarms); +} +static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL); + +/* vid */ +static ssize_t show_vid(struct device *dev, char *buf) +{ + struct adm9240_data *data = adm9240_update_device(dev); + return sprintf(buf, "%d\n", vid_from_reg(data->vid, data->vrm)); +} +static DEVICE_ATTR(cpu0_vid, S_IRUGO, show_vid, NULL); + +/* analog output */ +static ssize_t show_aout(struct device *dev, char *buf) +{ + struct adm9240_data *data = adm9240_update_device(dev); + return sprintf(buf, "%d\n", AOUT_FROM_REG(data->aout)); +} + +static ssize_t set_aout(struct device *dev, const char *buf, size_t count) +{ + struct i2c_client *client = to_i2c_client(dev); + struct adm9240_data *data = i2c_get_clientdata(client); + unsigned long val = simple_strtol(buf, NULL, 10); + + down(&data->update_lock); + data->aout = AOUT_TO_REG(val); + adm9240_write_value(client, ADM9240_REG_ANALOG_OUT, data->aout); + up(&data->update_lock); + return count; +} +static DEVICE_ATTR(aout_output, S_IRUGO | S_IWUSR, show_aout, set_aout); + +/* chassis_clear */ +static ssize_t chassis_clear(struct device *dev, const char *buf, size_t count) +{ + struct i2c_client *client = to_i2c_client(dev); + unsigned long val = simple_strtol(buf, NULL, 10); + + if (val == 1) { + adm9240_write_value(client, ADM9240_REG_CHASSIS_CLEAR, 0x80); + dev_dbg(&client->dev, "chassis intrusion latch cleared\n"); + } + return count; +} +static DEVICE_ATTR(chassis_clear, S_IWUSR, NULL, chassis_clear); + + +/*** sensor chip detect and driver install ***/ + +static int adm9240_detect(struct i2c_adapter *adapter, int address, int kind) +{ + struct i2c_client *new_client; + struct adm9240_data *data; + int err = 0; + const char *name = ""; + u8 man_id, die_rev; + + if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) + goto exit; + + if (!(data = kmalloc(sizeof(struct adm9240_data), GFP_KERNEL))) { + err = -ENOMEM; + goto exit; + } + memset(data, 0, sizeof(struct adm9240_data)); + + new_client = &data->client; + i2c_set_clientdata(new_client, data); + new_client->addr = address; + new_client->adapter = adapter; + new_client->driver = &adm9240_driver; + new_client->flags = 0; + + if (kind == 0) { + kind = adm9240; + } + + if (kind < 0) { + + /* verify chip: reg address should match i2c address */ + if (adm9240_read_value(new_client, ADM9240_REG_I2C_ADDR) + != address) { + dev_err(&adapter->dev, "detect fail: address match, " + "0x%02x\n", address); + goto exit_free; + } + + /* check known chip manufacturer */ + man_id = adm9240_read_value(new_client, ADM9240_REG_MAN_ID); + + if (man_id == 0x23) { + kind = adm9240; + } else if (man_id == 0xda) { + kind = ds1780; + } else if (man_id == 0x01) { + kind = lm81; + } else { + dev_err(&adapter->dev, "detect fail: unknown manuf, " + "0x%02x\n", man_id); + goto exit_free; + } + + /* successful detect, print chip info */ + die_rev = adm9240_read_value(new_client, ADM9240_REG_DIE_REV); + dev_info(&adapter->dev, "found %s revision %u\n", + man_id == 0x23 ? "ADM9240" : + man_id == 0xda ? "DS1780" : "LM81", die_rev); + } + + /* either forced or detected chip kind */ + if (kind == adm9240) { + name = "adm9240"; + } else if (kind == ds1780) { + name = "ds1780"; + } else if (kind == lm81) { + name = "lm81"; + } + + /* fill in the remaining client fields and attach */ + strlcpy(new_client->name, name, I2C_NAME_SIZE); + data->type = kind; + init_MUTEX(&data->update_lock); + + if ((err = i2c_attach_client(new_client))) + goto exit_free; + + adm9240_init_client(new_client); + + /* populate sysfs filesystem */ + device_create_file(&new_client->dev, &dev_attr_in0_input); + device_create_file(&new_client->dev, &dev_attr_in0_min); + device_create_file(&new_client->dev, &dev_attr_in0_max); + device_create_file(&new_client->dev, &dev_attr_in1_input); + device_create_file(&new_client->dev, &dev_attr_in1_min); + device_create_file(&new_client->dev, &dev_attr_in1_max); + device_create_file(&new_client->dev, &dev_attr_in2_input); + device_create_file(&new_client->dev, &dev_attr_in2_min); + device_create_file(&new_client->dev, &dev_attr_in2_max); + device_create_file(&new_client->dev, &dev_attr_in3_input); + device_create_file(&new_client->dev, &dev_attr_in3_min); + device_create_file(&new_client->dev, &dev_attr_in3_max); + device_create_file(&new_client->dev, &dev_attr_in4_input); + device_create_file(&new_client->dev, &dev_attr_in4_min); + device_create_file(&new_client->dev, &dev_attr_in4_max); + device_create_file(&new_client->dev, &dev_attr_in5_input); + device_create_file(&new_client->dev, &dev_attr_in5_min); + device_create_file(&new_client->dev, &dev_attr_in5_max); + device_create_file(&new_client->dev, &dev_attr_temp1_max); + device_create_file(&new_client->dev, &dev_attr_temp1_max_hyst); + device_create_file(&new_client->dev, &dev_attr_temp1_input); + device_create_file(&new_client->dev, &dev_attr_fan1_input); + device_create_file(&new_client->dev, &dev_attr_fan1_div); + device_create_file(&new_client->dev, &dev_attr_fan1_min); + device_create_file(&new_client->dev, &dev_attr_fan2_input); + device_create_file(&new_client->dev, &dev_attr_fan2_div); + device_create_file(&new_client->dev, &dev_attr_fan2_min); + device_create_file(&new_client->dev, &dev_attr_alarms); + device_create_file(&new_client->dev, &dev_attr_aout_output); + device_create_file(&new_client->dev, &dev_attr_chassis_clear); + device_create_file(&new_client->dev, &dev_attr_cpu0_vid); + + return 0; +exit_free: + kfree(new_client); +exit: + return err; +} + +static int adm9240_attach_adapter(struct i2c_adapter *adapter) +{ + if (!(adapter->class & I2C_CLASS_HWMON)) + return 0; + return i2c_detect(adapter, &addr_data, adm9240_detect); +} + +static int adm9240_detach_client(struct i2c_client *client) +{ + int err; + + if ((err = i2c_detach_client(client))) { + dev_err(&client->dev, "Client deregistration failed, " + "client not detached.\n"); + return err; + } + + kfree(i2c_get_clientdata(client)); + return 0; +} + +static void adm9240_init_client(struct i2c_client *client) +{ + struct adm9240_data *data = i2c_get_clientdata(client); + u8 conf = adm9240_read_value(client, ADM9240_REG_CONFIG); + u8 mode = adm9240_read_value(client, ADM9240_REG_TEMP_CONF) & 3; + + data->vrm = i2c_which_vrm(); /* need this to report vid as mV */ + + if (conf & 1) { /* measurement cycle running: report state */ + + dev_info(&client->dev, "status: config 0x%02x mode %u\n", + conf, mode); + + } else { /* cold start: open limits before starting chip */ + int i; + + for (i = 0; i < 6; i++) + { + adm9240_write_value(client, + ADM9240_REG_IN_MIN(i), 0); + adm9240_write_value(client, + ADM9240_REG_IN_MAX(i), 255); + } + adm9240_write_value(client, ADM9240_REG_FAN_MIN(0), 255); + adm9240_write_value(client, ADM9240_REG_FAN_MIN(1), 255); + adm9240_write_value(client, ADM9240_REG_TEMP_HIGH, 127); + adm9240_write_value(client, ADM9240_REG_TEMP_HYST, 127); + + /* start measurement cycle */ + adm9240_write_value(client, ADM9240_REG_CONFIG, 1); + + dev_info(&client->dev, "cold start: config was 0x%02x " + "mode %u\n", conf, mode); + } +} + +static struct adm9240_data *adm9240_update_device(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct adm9240_data *data = i2c_get_clientdata(client); + int i; + + down(&data->update_lock); + + /* minimum measurement cycle: 1.75 seconds */ + if (time_after(jiffies, data->last_updated_measure + (HZ * 7 / 4)) + || !data->valid) { + + for (i = 0; i < 6; i++) /* read voltages */ + { + data->in[i] = adm9240_read_value(client, + ADM9240_REG_IN(i)); + } + data->alarms = adm9240_read_value(client, + ADM9240_REG_INT(0)) | + adm9240_read_value(client, + ADM9240_REG_INT(1)) << 8; + + /* read temperature: assume temperature changes less than + * 0.5'C per two measurement cycles thus ignore possible + * but unlikely aliasing error on lsb reading. --Grant */ + data->temp = ((adm9240_read_value(client, + ADM9240_REG_TEMP) << 8) | + adm9240_read_value(client, + ADM9240_REG_TEMP_CONF)) / 128; + + for (i = 0; i < 2; i++) /* read fans */ + { + data->fan[i] = adm9240_read_value(client, + ADM9240_REG_FAN(i)); + + /* adjust fan clock divider on overflow */ + if (data->valid && data->fan[i] == 255 && + data->fan_div[i] < 3) { + + adm9240_write_fan_div(client, i, + ++data->fan_div[i]); + + /* adjust fan_min if active, but not to 0 */ + if (data->fan_min[i] < 255 && + data->fan_min[i] >= 2) + data->fan_min[i] /= 2; + } + } + data->last_updated_measure = jiffies; + } + + /* minimum config reading cycle: 300 seconds */ + if (time_after(jiffies, data->last_updated_config + (HZ * 300)) + || !data->valid) { + + for (i = 0; i < 6; i++) + { + data->in_min[i] = adm9240_read_value(client, + ADM9240_REG_IN_MIN(i)); + data->in_max[i] = adm9240_read_value(client, + ADM9240_REG_IN_MAX(i)); + } + for (i = 0; i < 2; i++) + { + data->fan_min[i] = adm9240_read_value(client, + ADM9240_REG_FAN_MIN(i)); + } + data->temp_high = adm9240_read_value(client, + ADM9240_REG_TEMP_HIGH); + data->temp_hyst = adm9240_read_value(client, + ADM9240_REG_TEMP_HYST); + + /* read fan divs and 5-bit VID */ + i = adm9240_read_value(client, ADM9240_REG_VID_FAN_DIV); + data->fan_div[0] = (i >> 4) & 3; + data->fan_div[1] = (i >> 6) & 3; + data->vid = i & 0x0f; + data->vid |= (adm9240_read_value(client, + ADM9240_REG_VID4) & 1) << 4; + /* read analog out */ + data->aout = adm9240_read_value(client, + ADM9240_REG_ANALOG_OUT); + + data->last_updated_config = jiffies; + data->valid = 1; + } + up(&data->update_lock); + return data; +} + +static int __init sensors_adm9240_init(void) +{ + return i2c_add_driver(&adm9240_driver); +} + +static void __exit sensors_adm9240_exit(void) +{ + i2c_del_driver(&adm9240_driver); +} + +MODULE_AUTHOR("Michiel Rook , " + "Grant Coady and others"); +MODULE_DESCRIPTION("ADM9240/DS1780/LM81 driver"); +MODULE_LICENSE("GPL"); + +module_init(sensors_adm9240_init); +module_exit(sensors_adm9240_exit); + -- 2.20.1