From 406e79385f3223d82272cf2be86bc95cd000a258 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Mon, 21 Nov 2016 22:45:40 +0100 Subject: [PATCH] PM / sleep: System sleep state selection interface rework There are systems in which the platform doesn't support any special sleep states, so suspend-to-idle (PM_SUSPEND_FREEZE) is the only available system sleep state. However, some user space frameworks only use the "mem" and (sometimes) "standby" sleep state labels, so the users of those systems need to modify user space in order to be able to use system suspend at all and that may be a pain in practice. Commit 0399d4db3edf (PM / sleep: Introduce command line argument for sleep state enumeration) attempted to address this problem by adding a command line argument to change the meaning of the "mem" string in /sys/power/state to make it trigger suspend-to-idle (instead of suspend-to-RAM). However, there also are systems in which the platform does support special sleep states, but suspend-to-idle is the preferred one anyway (it even may save more energy than the platform-provided sleep states in some cases) and the above commit doesn't help in those cases. For this reason, rework the system sleep state selection interface again (but preserve backwards compatibiliby). Namely, add a new sysfs file, /sys/power/mem_sleep, that will control the system suspend mode triggered by writing "mem" to /sys/power/state (in analogy with what /sys/power/disk does for hibernation). Make it select suspend-to-RAM ("deep" sleep) by default (if supported) and fall back to suspend-to-idle ("s2idle") otherwise and add a new command line argument, mem_sleep_default, allowing that default to be overridden if need be. At the same time, drop the relative_sleep_states command line argument that doesn't make sense any more. Signed-off-by: Rafael J. Wysocki Tested-by: Mario Limonciello --- Documentation/ABI/testing/sysfs-power | 45 ++++++++------ Documentation/kernel-parameters.txt | 13 ++-- Documentation/power/states.txt | 60 +++++++++++------- kernel/power/main.c | 88 ++++++++++++++++++++++++++- kernel/power/power.h | 6 +- kernel/power/suspend.c | 69 +++++++++++++-------- 6 files changed, 201 insertions(+), 80 deletions(-) diff --git a/Documentation/ABI/testing/sysfs-power b/Documentation/ABI/testing/sysfs-power index 50b368d490b5..f523e5a3ac33 100644 --- a/Documentation/ABI/testing/sysfs-power +++ b/Documentation/ABI/testing/sysfs-power @@ -7,30 +7,35 @@ Description: subsystem. What: /sys/power/state -Date: May 2014 +Date: November 2016 Contact: Rafael J. Wysocki Description: The /sys/power/state file controls system sleep states. Reading from this file returns the available sleep state - labels, which may be "mem", "standby", "freeze" and "disk" - (hibernation). The meanings of the first three labels depend on - the relative_sleep_states command line argument as follows: - 1) relative_sleep_states = 1 - "mem", "standby", "freeze" represent non-hibernation sleep - states from the deepest ("mem", always present) to the - shallowest ("freeze"). "standby" and "freeze" may or may - not be present depending on the capabilities of the - platform. "freeze" can only be present if "standby" is - present. - 2) relative_sleep_states = 0 (default) - "mem" - "suspend-to-RAM", present if supported. - "standby" - "power-on suspend", present if supported. - "freeze" - "suspend-to-idle", always present. - - Writing to this file one of these strings causes the system to - transition into the corresponding state, if available. See - Documentation/power/states.txt for a description of what - "suspend-to-RAM", "power-on suspend" and "suspend-to-idle" mean. + labels, which may be "mem" (suspend), "standby" (power-on + suspend), "freeze" (suspend-to-idle) and "disk" (hibernation). + + Writing one of the above strings to this file causes the system + to transition into the corresponding state, if available. + + See Documentation/power/states.txt for more information. + +What: /sys/power/mem_sleep +Date: November 2016 +Contact: Rafael J. Wysocki +Description: + The /sys/power/mem_sleep file controls the operating mode of + system suspend. Reading from it returns the available modes + as "s2idle" (always present), "shallow" and "deep" (present if + supported). The mode that will be used on subsequent attempts + to suspend the system (by writing "mem" to the /sys/power/state + file described above) is enclosed in square brackets. + + Writing one of the above strings to this file causes the mode + represented by it to be used on subsequent attempts to suspend + the system. + + See Documentation/power/states.txt for more information. What: /sys/power/disk Date: September 2006 diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index 37babf91f2cb..4131e169f97a 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -2325,6 +2325,12 @@ bytes respectively. Such letter suffixes can also be entirely omitted. memory contents and reserves bad memory regions that are detected. + mem_sleep_default= [SUSPEND] Default system suspend mode: + s2idle - Suspend-To-Idle + shallow - Power-On Suspend or equivalent (if supported) + deep - Suspend-To-RAM or equivalent (if supported) + See Documentation/power/states.txt. + meye.*= [HW] Set MotionEye Camera parameters See Documentation/video4linux/meye.txt. @@ -3668,13 +3674,6 @@ bytes respectively. Such letter suffixes can also be entirely omitted. [KNL, SMP] Set scheduler's default relax_domain_level. See Documentation/cgroup-v1/cpusets.txt. - relative_sleep_states= - [SUSPEND] Use sleep state labeling where the deepest - state available other than hibernation is always "mem". - Format: { "0" | "1" } - 0 -- Traditional sleep state labels. - 1 -- Relative sleep state labels. - reserve= [KNL,BUGS] Force the kernel to ignore some iomem area reservetop= [X86-32] diff --git a/Documentation/power/states.txt b/Documentation/power/states.txt index 50f3ef9177c1..008ecb588317 100644 --- a/Documentation/power/states.txt +++ b/Documentation/power/states.txt @@ -8,25 +8,41 @@ for each state. The states are represented by strings that can be read or written to the /sys/power/state file. Those strings may be "mem", "standby", "freeze" and -"disk", where the last one always represents hibernation (Suspend-To-Disk) and -the meaning of the remaining ones depends on the relative_sleep_states command -line argument. - -For relative_sleep_states=1, the strings "mem", "standby" and "freeze" label the -available non-hibernation sleep states from the deepest to the shallowest, -respectively. In that case, "mem" is always present in /sys/power/state, -because there is at least one non-hibernation sleep state in every system. If -the given system supports two non-hibernation sleep states, "standby" is present -in /sys/power/state in addition to "mem". If the system supports three -non-hibernation sleep states, "freeze" will be present in /sys/power/state in -addition to "mem" and "standby". - -For relative_sleep_states=0, which is the default, the following descriptions -apply. - -state: Suspend-To-Idle +"disk", where the last three always represent Power-On Suspend (if supported), +Suspend-To-Idle and hibernation (Suspend-To-Disk), respectively. + +The meaning of the "mem" string is controlled by the /sys/power/mem_sleep file. +It contains strings representing the available modes of system suspend that may +be triggered by writing "mem" to /sys/power/state. These modes are "s2idle" +(Suspend-To-Idle), "shallow" (Power-On Suspend) and "deep" (Suspend-To-RAM). +The "s2idle" mode is always available, while the other ones are only available +if supported by the platform (if not supported, the strings representing them +are not present in /sys/power/mem_sleep). The string representing the suspend +mode to be used subsequently is enclosed in square brackets. Writing one of +the other strings present in /sys/power/mem_sleep to it causes the suspend mode +to be used subsequently to change to the one represented by that string. + +Consequently, there are two ways to cause the system to go into the +Suspend-To-Idle sleep state. The first one is to write "freeze" directly to +/sys/power/state. The second one is to write "s2idle" to /sys/power/mem_sleep +and then to wrtie "mem" to /sys/power/state. Similarly, there are two ways +to cause the system to go into the Power-On Suspend sleep state (the strings to +write to the control files in that case are "standby" or "shallow" and "mem", +respectively) if that state is supported by the platform. In turn, there is +only one way to cause the system to go into the Suspend-To-RAM state (write +"deep" into /sys/power/mem_sleep and "mem" into /sys/power/state). + +The default suspend mode (ie. the one to be used without writing anything into +/sys/power/mem_sleep) is either "deep" (if Suspend-To-RAM is supported) or +"s2idle", but it can be overridden by the value of the "mem_sleep_default" +parameter in the kernel command line. + +The properties of all of the sleep states are described below. + + +State: Suspend-To-Idle ACPI state: S0 -Label: "freeze" +Label: "s2idle" ("freeze") This state is a generic, pure software, light-weight, system sleep state. It allows more energy to be saved relative to runtime idle by freezing user @@ -35,13 +51,13 @@ lower-power than available at run time), such that the processors can spend more time in their idle states. This state can be used for platforms without Power-On Suspend/Suspend-to-RAM -support, or it can be used in addition to Suspend-to-RAM (memory sleep) -to provide reduced resume latency. It is always supported. +support, or it can be used in addition to Suspend-to-RAM to provide reduced +resume latency. It is always supported. State: Standby / Power-On Suspend ACPI State: S1 -Label: "standby" +Label: "shallow" ("standby") This state, if supported, offers moderate, though real, power savings, while providing a relatively low-latency transition back to a working system. No @@ -58,7 +74,7 @@ state. State: Suspend-to-RAM ACPI State: S3 -Label: "mem" +Label: "deep" This state, if supported, offers significant power savings as everything in the system is put into a low-power state, except for memory, which should be placed diff --git a/kernel/power/main.c b/kernel/power/main.c index 281a697fd458..d401c21136d1 100644 --- a/kernel/power/main.c +++ b/kernel/power/main.c @@ -78,6 +78,78 @@ static ssize_t pm_async_store(struct kobject *kobj, struct kobj_attribute *attr, power_attr(pm_async); +#ifdef CONFIG_SUSPEND +static ssize_t mem_sleep_show(struct kobject *kobj, struct kobj_attribute *attr, + char *buf) +{ + char *s = buf; + suspend_state_t i; + + for (i = PM_SUSPEND_MIN; i < PM_SUSPEND_MAX; i++) + if (mem_sleep_states[i]) { + const char *label = mem_sleep_states[i]; + + if (mem_sleep_current == i) + s += sprintf(s, "[%s] ", label); + else + s += sprintf(s, "%s ", label); + } + + /* Convert the last space to a newline if needed. */ + if (s != buf) + *(s-1) = '\n'; + + return (s - buf); +} + +static suspend_state_t decode_suspend_state(const char *buf, size_t n) +{ + suspend_state_t state; + char *p; + int len; + + p = memchr(buf, '\n', n); + len = p ? p - buf : n; + + for (state = PM_SUSPEND_MIN; state < PM_SUSPEND_MAX; state++) { + const char *label = mem_sleep_states[state]; + + if (label && len == strlen(label) && !strncmp(buf, label, len)) + return state; + } + + return PM_SUSPEND_ON; +} + +static ssize_t mem_sleep_store(struct kobject *kobj, struct kobj_attribute *attr, + const char *buf, size_t n) +{ + suspend_state_t state; + int error; + + error = pm_autosleep_lock(); + if (error) + return error; + + if (pm_autosleep_state() > PM_SUSPEND_ON) { + error = -EBUSY; + goto out; + } + + state = decode_suspend_state(buf, n); + if (state < PM_SUSPEND_MAX && state > PM_SUSPEND_ON) + mem_sleep_current = state; + else + error = -EINVAL; + + out: + pm_autosleep_unlock(); + return error ? error : n; +} + +power_attr(mem_sleep); +#endif /* CONFIG_SUSPEND */ + #ifdef CONFIG_PM_DEBUG int pm_test_level = TEST_NONE; @@ -368,12 +440,16 @@ static ssize_t state_store(struct kobject *kobj, struct kobj_attribute *attr, } state = decode_state(buf, n); - if (state < PM_SUSPEND_MAX) + if (state < PM_SUSPEND_MAX) { + if (state == PM_SUSPEND_MEM) + state = mem_sleep_current; + error = pm_suspend(state); - else if (state == PM_SUSPEND_MAX) + } else if (state == PM_SUSPEND_MAX) { error = hibernate(); - else + } else { error = -EINVAL; + } out: pm_autosleep_unlock(); @@ -485,6 +561,9 @@ static ssize_t autosleep_store(struct kobject *kobj, && strcmp(buf, "off") && strcmp(buf, "off\n")) return -EINVAL; + if (state == PM_SUSPEND_MEM) + state = mem_sleep_current; + error = pm_autosleep_set_state(state); return error ? error : n; } @@ -602,6 +681,9 @@ static struct attribute * g[] = { #ifdef CONFIG_PM_SLEEP &pm_async_attr.attr, &wakeup_count_attr.attr, +#ifdef CONFIG_SUSPEND + &mem_sleep_attr.attr, +#endif #ifdef CONFIG_PM_AUTOSLEEP &autosleep_attr.attr, #endif diff --git a/kernel/power/power.h b/kernel/power/power.h index 56d1d0dedf76..1dfa0da827d3 100644 --- a/kernel/power/power.h +++ b/kernel/power/power.h @@ -189,11 +189,15 @@ extern void swsusp_show_speed(ktime_t, ktime_t, unsigned int, char *); #ifdef CONFIG_SUSPEND /* kernel/power/suspend.c */ -extern const char *pm_labels[]; +extern const char * const pm_labels[]; extern const char *pm_states[]; +extern const char *mem_sleep_states[]; +extern suspend_state_t mem_sleep_current; extern int suspend_devices_and_enter(suspend_state_t state); #else /* !CONFIG_SUSPEND */ +#define mem_sleep_current PM_SUSPEND_ON + static inline int suspend_devices_and_enter(suspend_state_t state) { return -ENOSYS; diff --git a/kernel/power/suspend.c b/kernel/power/suspend.c index 6ccb08f57fcb..15e6baef5c73 100644 --- a/kernel/power/suspend.c +++ b/kernel/power/suspend.c @@ -32,8 +32,21 @@ #include "power.h" -const char *pm_labels[] = { "mem", "standby", "freeze", NULL }; +const char * const pm_labels[] = { + [PM_SUSPEND_FREEZE] = "freeze", + [PM_SUSPEND_STANDBY] = "standby", + [PM_SUSPEND_MEM] = "mem", +}; const char *pm_states[PM_SUSPEND_MAX]; +static const char * const mem_sleep_labels[] = { + [PM_SUSPEND_FREEZE] = "s2idle", + [PM_SUSPEND_STANDBY] = "shallow", + [PM_SUSPEND_MEM] = "deep", +}; +const char *mem_sleep_states[PM_SUSPEND_MAX]; + +suspend_state_t mem_sleep_current = PM_SUSPEND_FREEZE; +static suspend_state_t mem_sleep_default = PM_SUSPEND_MEM; unsigned int pm_suspend_global_flags; EXPORT_SYMBOL_GPL(pm_suspend_global_flags); @@ -110,30 +123,32 @@ static bool valid_state(suspend_state_t state) return suspend_ops && suspend_ops->valid && suspend_ops->valid(state); } -/* - * If this is set, the "mem" label always corresponds to the deepest sleep state - * available, the "standby" label corresponds to the second deepest sleep state - * available (if any), and the "freeze" label corresponds to the remaining - * available sleep state (if there is one). - */ -static bool relative_states; - void __init pm_states_init(void) { + /* "mem" and "freeze" are always present in /sys/power/state. */ + pm_states[PM_SUSPEND_MEM] = pm_labels[PM_SUSPEND_MEM]; + pm_states[PM_SUSPEND_FREEZE] = pm_labels[PM_SUSPEND_FREEZE]; /* - * freeze state should be supported even without any suspend_ops, - * initialize pm_states accordingly here + * Suspend-to-idle should be supported even without any suspend_ops, + * initialize mem_sleep_states[] accordingly here. */ - pm_states[PM_SUSPEND_FREEZE] = pm_labels[relative_states ? 0 : 2]; + mem_sleep_states[PM_SUSPEND_FREEZE] = mem_sleep_labels[PM_SUSPEND_FREEZE]; } -static int __init sleep_states_setup(char *str) +static int __init mem_sleep_default_setup(char *str) { - relative_states = !strncmp(str, "1", 1); + suspend_state_t state; + + for (state = PM_SUSPEND_FREEZE; state <= PM_SUSPEND_MEM; state++) + if (mem_sleep_labels[state] && + !strcmp(str, mem_sleep_labels[state])) { + mem_sleep_default = state; + break; + } + return 1; } - -__setup("relative_sleep_states=", sleep_states_setup); +__setup("mem_sleep_default=", mem_sleep_default_setup); /** * suspend_set_ops - Set the global suspend method table. @@ -141,21 +156,21 @@ __setup("relative_sleep_states=", sleep_states_setup); */ void suspend_set_ops(const struct platform_suspend_ops *ops) { - suspend_state_t i; - int j = 0; - lock_system_sleep(); suspend_ops = ops; - for (i = PM_SUSPEND_MEM; i >= PM_SUSPEND_STANDBY; i--) - if (valid_state(i)) { - pm_states[i] = pm_labels[j++]; - } else if (!relative_states) { - pm_states[i] = NULL; - j++; - } - pm_states[PM_SUSPEND_FREEZE] = pm_labels[j]; + if (valid_state(PM_SUSPEND_STANDBY)) { + mem_sleep_states[PM_SUSPEND_STANDBY] = mem_sleep_labels[PM_SUSPEND_STANDBY]; + pm_states[PM_SUSPEND_STANDBY] = pm_labels[PM_SUSPEND_STANDBY]; + if (mem_sleep_default == PM_SUSPEND_STANDBY) + mem_sleep_current = PM_SUSPEND_STANDBY; + } + if (valid_state(PM_SUSPEND_MEM)) { + mem_sleep_states[PM_SUSPEND_MEM] = mem_sleep_labels[PM_SUSPEND_MEM]; + if (mem_sleep_default == PM_SUSPEND_MEM) + mem_sleep_current = PM_SUSPEND_MEM; + } unlock_system_sleep(); } -- 2.20.1