From 3ee44d6011f5df36c9b062cbf25536c3691235e3 Mon Sep 17 00:00:00 2001 From: Andrea Merello Date: Wed, 26 Mar 2014 21:00:57 +0100 Subject: [PATCH] rtl8180: add TX queue mapping and support for rtl8187se This patch adds tx queue mapping for rtl8187se and a long comment block about their usages. It adapts the TX function to use that map and it sets properly the TX descriptor rtl8187se-only fields Signed-off-by: Andrea Merello Signed-off-by: John W. Linville --- drivers/net/wireless/rtl818x/rtl8180/dev.c | 84 +++++++++++++++++-- .../net/wireless/rtl818x/rtl8180/rtl8180.h | 10 ++- 2 files changed, 88 insertions(+), 6 deletions(-) diff --git a/drivers/net/wireless/rtl818x/rtl8180/dev.c b/drivers/net/wireless/rtl818x/rtl8180/dev.c index cce972d289ef..eb86ede246d2 100644 --- a/drivers/net/wireless/rtl818x/rtl8180/dev.c +++ b/drivers/net/wireless/rtl818x/rtl8180/dev.c @@ -85,6 +85,52 @@ static const struct ieee80211_channel rtl818x_channels[] = { { .center_freq = 2484 }, }; +/* Queues for rtl8187se card + * + * name | reg | queue + * BC | 7 | 6 + * MG | 1 | 0 + * HI | 6 | 1 + * VO | 5 | 2 + * VI | 4 | 3 + * BE | 3 | 4 + * BK | 2 | 5 + * + * The complete map for DMA kick reg using use all queue is: + * static const int rtl8187se_queues_map[RTL8187SE_NR_TX_QUEUES] = + * {1, 6, 5, 4, 3, 2, 7}; + * + * .. but.. Because for mac80211 4 queues are enough for QoS we use this + * + * name | reg | queue + * BC | 7 | 4 <- currently not used yet + * MG | 1 | x <- Not used + * HI | 6 | x <- Not used + * VO | 5 | 0 <- used + * VI | 4 | 1 <- used + * BE | 3 | 2 <- used + * BK | 2 | 3 <- used + * + * Beacon queue could be used, but this is not finished yet. + * + * I thougth about using the other two queues but I decided not to do this: + * + * - I'm unsure whether the mac80211 will ever try to use more than 4 queues + * by itself. + * + * - I could route MGMT frames (currently sent over VO queue) to the MGMT + * queue but since mac80211 will do not know about it, I will probably gain + * some HW priority whenever the VO queue is not empty, but this gain is + * limited by the fact that I had to stop the mac80211 queue whenever one of + * the VO or MGMT queues is full, stopping also submitting of MGMT frame + * to the driver. + * + * - I don't know how to set in the HW the contention window params for MGMT + * and HI-prio queues. + */ + +static const int rtl8187se_queues_map[RTL8187SE_NR_TX_QUEUES] = {5, 4, 3, 2, 7}; + /* Queues for rtl8180/rtl8185 cards * * name | reg | prio @@ -358,6 +404,8 @@ static void rtl8180_tx(struct ieee80211_hw *dev, u8 rc_flags; u16 plcp_len = 0; __le16 rts_duration = 0; + /* do arithmetic and then convert to le16 */ + u16 frame_duration = 0; prio = skb_get_queue_mapping(skb); ring = &priv->tx_ring[prio]; @@ -369,7 +417,6 @@ static void rtl8180_tx(struct ieee80211_hw *dev, kfree_skb(skb); dev_err(&priv->pdev->dev, "TX DMA mapping error\n"); return; - } tx_flags = RTL818X_TX_DESC_FLAG_OWN | RTL818X_TX_DESC_FLAG_FS | @@ -405,6 +452,18 @@ static void rtl8180_tx(struct ieee80211_hw *dev, plcp_len |= 1 << 15; } + if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8187SE) { + __le16 duration; + /* SIFS time (required by HW) is already included by + * ieee80211_generic_frame_duration + */ + duration = ieee80211_generic_frame_duration(dev, priv->vif, + IEEE80211_BAND_2GHZ, skb->len, + ieee80211_get_tx_rate(dev, info)); + + frame_duration = priv->ack_time + le16_to_cpu(duration); + } + spin_lock_irqsave(&priv->lock, flags); if (info->flags & IEEE80211_TX_CTL_ASSIGN_SEQ) { @@ -417,10 +476,19 @@ static void rtl8180_tx(struct ieee80211_hw *dev, idx = (ring->idx + skb_queue_len(&ring->queue)) % ring->entries; entry = &ring->desc[idx]; + if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8187SE) { + entry->frame_duration = cpu_to_le16(frame_duration); + entry->frame_len_se = cpu_to_le16(skb->len); + + /* tpc polarity */ + entry->flags3 = cpu_to_le16(1<<4); + } else + entry->frame_len = cpu_to_le32(skb->len); + entry->rts_duration = rts_duration; entry->plcp_len = cpu_to_le16(plcp_len); entry->tx_buf = cpu_to_le32(mapping); - entry->frame_len = cpu_to_le32(skb->len); + entry->flags2 = info->control.rates[1].idx >= 0 ? ieee80211_get_alt_retry_rate(dev, info, 0)->bitrate << 4 : 0; entry->retry_limit = info->control.rates[0].count; @@ -442,11 +510,17 @@ static void rtl8180_tx(struct ieee80211_hw *dev, spin_unlock_irqrestore(&priv->lock, flags); - hw_prio = rtl8180_queues_map[prio]; - - rtl818x_iowrite8(priv, &priv->map->TX_DMA_POLLING, + if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8187SE) { + /* just poll: rings are stopped with TPPollStop reg */ + hw_prio = rtl8187se_queues_map[prio]; + rtl818x_iowrite8(priv, &priv->map->TX_DMA_POLLING, + (1 << hw_prio)); + } else { + hw_prio = rtl8180_queues_map[prio]; + rtl818x_iowrite8(priv, &priv->map->TX_DMA_POLLING, (1 << hw_prio) | /* ring to poll */ (1<<1) | (1<<2));/* stopped rings */ + } } void rtl8180_set_anaparam(struct rtl8180_priv *priv, u32 anaparam) diff --git a/drivers/net/wireless/rtl818x/rtl8180/rtl8180.h b/drivers/net/wireless/rtl818x/rtl8180/rtl8180.h index d866cc6a845f..d64e75d766d4 100644 --- a/drivers/net/wireless/rtl818x/rtl8180/rtl8180.h +++ b/drivers/net/wireless/rtl818x/rtl8180/rtl8180.h @@ -29,6 +29,14 @@ */ #define RTL8180_NR_TX_QUEUES 2 +/* rtl8187SE have 6 queues + beacon queues + * mac80211 can use 4 QoS data queue, + beacon = 5 tot + */ +#define RTL8187SE_NR_TX_QUEUES 5 + +/* for array static allocation, it is the max of above */ +#define RTL818X_NR_TX_QUEUES 5 + struct rtl8180_tx_desc { __le32 flags; __le16 rts_duration; @@ -105,7 +113,7 @@ struct rtl8180_priv { dma_addr_t rx_ring_dma; unsigned int rx_idx; struct sk_buff *rx_buf[32]; - struct rtl8180_tx_ring tx_ring[RTL8180_NR_TX_QUEUES]; + struct rtl8180_tx_ring tx_ring[RTL818X_NR_TX_QUEUES]; struct ieee80211_channel channels[14]; struct ieee80211_rate rates[12]; struct ieee80211_supported_band band; -- 2.20.1