From 3eb0c5f4b539873ca88f8597db6a49e83ddfd7e2 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Fri, 29 Jul 2005 12:18:03 -0700 Subject: [PATCH] [PATCH] USB: add S3C24XX USB Host driver support USB (OHCI) Host driver for S3C2410/S3C2440 based systems Signed-off-by: Ben Dooks Signed-off-by: Greg Kroah-Hartman Signed-off-by: Linus Torvalds --- drivers/usb/Kconfig | 1 + drivers/usb/host/ohci-hcd.c | 5 + drivers/usb/host/ohci-s3c2410.c | 496 ++++++++++++++++++++++++++++++++ 3 files changed, 502 insertions(+) create mode 100644 drivers/usb/host/ohci-s3c2410.c diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig index cd329dd7fb8..85dacc92545 100644 --- a/drivers/usb/Kconfig +++ b/drivers/usb/Kconfig @@ -20,6 +20,7 @@ config USB_ARCH_HAS_OHCI default y if SA1111 default y if ARCH_OMAP default y if ARCH_LH7A404 + default y if ARCH_S3C2410 default y if PXA27x # PPC: default y if STB03xxx diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c index 68decab280d..56b43f2a0e5 100644 --- a/drivers/usb/host/ohci-hcd.c +++ b/drivers/usb/host/ohci-hcd.c @@ -887,6 +887,10 @@ MODULE_LICENSE ("GPL"); #include "ohci-sa1111.c" #endif +#ifdef CONFIG_ARCH_S3C2410 +#include "ohci-s3c2410.c" +#endif + #ifdef CONFIG_ARCH_OMAP #include "ohci-omap.c" #endif @@ -909,6 +913,7 @@ MODULE_LICENSE ("GPL"); #if !(defined(CONFIG_PCI) \ || defined(CONFIG_SA1111) \ + || defined(CONFIG_ARCH_S3C2410) \ || defined(CONFIG_ARCH_OMAP) \ || defined (CONFIG_ARCH_LH7A404) \ || defined (CONFIG_PXA27x) \ diff --git a/drivers/usb/host/ohci-s3c2410.c b/drivers/usb/host/ohci-s3c2410.c new file mode 100644 index 00000000000..e9401662503 --- /dev/null +++ b/drivers/usb/host/ohci-s3c2410.c @@ -0,0 +1,496 @@ +/* + * OHCI HCD (Host Controller Driver) for USB. + * + * (C) Copyright 1999 Roman Weissgaerber + * (C) Copyright 2000-2002 David Brownell + * (C) Copyright 2002 Hewlett-Packard Company + * + * USB Bus Glue for Samsung S3C2410 + * + * Written by Christopher Hoover + * Based on fragments of previous driver by Rusell King et al. + * + * Modified for S3C2410 from ohci-sa1111.c, ohci-omap.c and ohci-lh7a40.c + * by Ben Dooks, + * Copyright (C) 2004 Simtec Electronics + * + * Thanks to basprog@mail.ru for updates to newer kernels + * + * This file is licenced under the GPL. +*/ + +#include +#include +#include +#include + +#define valid_port(idx) ((idx) == 1 || (idx) == 2) + +/* clock device associated with the hcd */ + +static struct clk *clk; + +/* forward definitions */ + +static void s3c2410_hcd_oc(struct s3c2410_hcd_info *info, int port_oc); + +/* conversion functions */ + +struct s3c2410_hcd_info *to_s3c2410_info(struct usb_hcd *hcd) +{ + return hcd->self.controller->platform_data; +} + +static void s3c2410_start_hc(struct platform_device *dev, struct usb_hcd *hcd) +{ + struct s3c2410_hcd_info *info = dev->dev.platform_data; + + dev_dbg(&dev->dev, "s3c2410_start_hc:\n"); + clk_enable(clk); + + if (info != NULL) { + info->hcd = hcd; + info->report_oc = s3c2410_hcd_oc; + + if (info->enable_oc != NULL) { + (info->enable_oc)(info, 1); + } + } +} + +static void s3c2410_stop_hc(struct platform_device *dev) +{ + struct s3c2410_hcd_info *info = dev->dev.platform_data; + + dev_dbg(&dev->dev, "s3c2410_stop_hc:\n"); + + if (info != NULL) { + info->report_oc = NULL; + info->hcd = NULL; + + if (info->enable_oc != NULL) { + (info->enable_oc)(info, 0); + } + } + + clk_disable(clk); +} + +/* ohci_s3c2410_hub_status_data + * + * update the status data from the hub with anything that + * has been detected by our system +*/ + +static int +ohci_s3c2410_hub_status_data (struct usb_hcd *hcd, char *buf) +{ + struct s3c2410_hcd_info *info = to_s3c2410_info(hcd); + struct s3c2410_hcd_port *port; + int orig; + int portno; + + orig = ohci_hub_status_data (hcd, buf); + + if (info == NULL) + return orig; + + port = &info->port[0]; + + /* mark any changed port as changed */ + + for (portno = 0; portno < 2; port++, portno++) { + if (port->oc_changed == 1 && + port->flags & S3C_HCDFLG_USED) { + dev_dbg(hcd->self.controller, + "oc change on port %d\n", portno); + + if (orig < 1) + orig = 1; + + buf[0] |= 1<<(portno+1); + } + } + + return orig; +} + +/* s3c2410_usb_set_power + * + * configure the power on a port, by calling the platform device + * routine registered with the platform device +*/ + +static void s3c2410_usb_set_power(struct s3c2410_hcd_info *info, + int port, int to) +{ + if (info == NULL) + return; + + if (info->power_control != NULL) { + info->port[port-1].power = to; + (info->power_control)(port, to); + } +} + +/* ohci_s3c2410_hub_control + * + * look at control requests to the hub, and see if we need + * to take any action or over-ride the results from the + * request. +*/ + +static int ohci_s3c2410_hub_control ( + struct usb_hcd *hcd, + u16 typeReq, + u16 wValue, + u16 wIndex, + char *buf, + u16 wLength) +{ + struct s3c2410_hcd_info *info = to_s3c2410_info(hcd); + struct usb_hub_descriptor *desc; + int ret = -EINVAL; + u32 *data = (u32 *)buf; + + dev_dbg(hcd->self.controller, + "s3c2410_hub_control(%p,0x%04x,0x%04x,0x%04x,%p,%04x)\n", + hcd, typeReq, wValue, wIndex, buf, wLength); + + /* if we are only an humble host without any special capabilites + * process the request straight away and exit */ + + if (info == NULL) { + ret = ohci_hub_control(hcd, typeReq, wValue, + wIndex, buf, wLength); + goto out; + } + + /* check the request to see if it needs handling */ + + switch (typeReq) { + case SetPortFeature: + if (wValue == USB_PORT_FEAT_POWER) { + dev_dbg(hcd->self.controller, "SetPortFeat: POWER\n"); + s3c2410_usb_set_power(info, wIndex, 1); + goto out; + } + break; + + case ClearPortFeature: + switch (wValue) { + case USB_PORT_FEAT_C_OVER_CURRENT: + dev_dbg(hcd->self.controller, + "ClearPortFeature: C_OVER_CURRENT\n"); + + if (valid_port(wIndex)) { + info->port[wIndex-1].oc_changed = 0; + info->port[wIndex-1].oc_status = 0; + } + + goto out; + + case USB_PORT_FEAT_OVER_CURRENT: + dev_dbg(hcd->self.controller, + "ClearPortFeature: OVER_CURRENT\n"); + + if (valid_port(wIndex)) { + info->port[wIndex-1].oc_status = 0; + } + + goto out; + + case USB_PORT_FEAT_POWER: + dev_dbg(hcd->self.controller, + "ClearPortFeature: POWER\n"); + + if (valid_port(wIndex)) { + s3c2410_usb_set_power(info, wIndex, 0); + return 0; + } + } + break; + } + + ret = ohci_hub_control(hcd, typeReq, wValue, wIndex, buf, wLength); + if (ret) + goto out; + + switch (typeReq) { + case GetHubDescriptor: + + /* update the hub's descriptor */ + + desc = (struct usb_hub_descriptor *)buf; + + if (info->power_control == NULL) + return ret; + + dev_dbg(hcd->self.controller, "wHubCharacteristics 0x%04x\n", + desc->wHubCharacteristics); + + /* remove the old configurations for power-switching, and + * over-current protection, and insert our new configuration + */ + + desc->wHubCharacteristics &= ~cpu_to_le16(HUB_CHAR_LPSM); + desc->wHubCharacteristics |= cpu_to_le16(0x0001); + + if (info->enable_oc) { + desc->wHubCharacteristics &= ~cpu_to_le16(HUB_CHAR_OCPM); + desc->wHubCharacteristics |= cpu_to_le16(0x0008|0x0001); + } + + dev_dbg(hcd->self.controller, "wHubCharacteristics after 0x%04x\n", + desc->wHubCharacteristics); + + return ret; + + case GetPortStatus: + /* check port status */ + + dev_dbg(hcd->self.controller, "GetPortStatus(%d)\n", wIndex); + + if (valid_port(wIndex)) { + if (info->port[wIndex-1].oc_changed) { + *data |= cpu_to_le32(RH_PS_OCIC); + } + + if (info->port[wIndex-1].oc_status) { + *data |= cpu_to_le32(RH_PS_POCI); + } + } + } + + out: + return ret; +} + +/* s3c2410_hcd_oc + * + * handle an over-current report +*/ + +static void s3c2410_hcd_oc(struct s3c2410_hcd_info *info, int port_oc) +{ + struct s3c2410_hcd_port *port; + struct usb_hcd *hcd; + unsigned long flags; + int portno; + + if (info == NULL) + return; + + port = &info->port[0]; + hcd = info->hcd; + + local_irq_save(flags); + + for (portno = 0; portno < 2; port++, portno++) { + if (port_oc & (1<flags & S3C_HCDFLG_USED) { + port->oc_status = 1; + port->oc_changed = 1; + + /* ok, once over-current is detected, + the port needs to be powered down */ + s3c2410_usb_set_power(info, portno+1, 0); + } + } + + local_irq_restore(flags); +} + +/* may be called without controller electrically present */ +/* may be called with controller, bus, and devices active */ + +/* + * usb_hcd_s3c2410_remove - shutdown processing for HCD + * @dev: USB Host Controller being removed + * Context: !in_interrupt() + * + * Reverses the effect of usb_hcd_3c2410_probe(), first invoking + * the HCD's stop() method. It is always called from a thread + * context, normally "rmmod", "apmd", or something similar. + * +*/ + +void usb_hcd_s3c2410_remove (struct usb_hcd *hcd, struct platform_device *dev) +{ + usb_remove_hcd(hcd); + s3c2410_stop_hc(dev); + iounmap(hcd->regs); + release_mem_region(hcd->rsrc_start, hcd->rsrc_len); + usb_put_hcd(hcd); +} + +/** + * usb_hcd_s3c2410_probe - initialize S3C2410-based HCDs + * Context: !in_interrupt() + * + * Allocates basic resources for this USB host controller, and + * then invokes the start() method for the HCD associated with it + * through the hotplug entry's driver_data. + * + */ +int usb_hcd_s3c2410_probe (const struct hc_driver *driver, + struct platform_device *dev) +{ + struct usb_hcd *hcd = NULL; + int retval; + + s3c2410_usb_set_power(dev->dev.platform_data, 0, 1); + s3c2410_usb_set_power(dev->dev.platform_data, 1, 1); + + hcd = usb_create_hcd(driver, &dev->dev, "s3c24xx"); + if (hcd == NULL) + return -ENOMEM; + + hcd->rsrc_start = dev->resource[0].start; + hcd->rsrc_len = dev->resource[0].end - dev->resource[0].start + 1; + + if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) { + dev_err(&dev->dev, "request_mem_region failed"); + retval = -EBUSY; + goto err0; + } + + clk = clk_get(NULL, "usb-host"); + if (IS_ERR(clk)) { + dev_err(&dev->dev, "cannot get usb-host clock\n"); + retval = -ENOENT; + goto err1; + } + + clk_use(clk); + s3c2410_start_hc(dev, hcd); + + hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len); + if (!hcd->regs) { + dev_err(&dev->dev, "ioremap failed\n"); + retval = -ENOMEM; + goto err2; + } + + ohci_hcd_init(hcd_to_ohci(hcd)); + + retval = usb_add_hcd(hcd, dev->resource[1].start, SA_INTERRUPT); + if (retval != 0) + goto err2; + + return 0; + + err2: + s3c2410_stop_hc(dev); + iounmap(hcd->regs); + clk_unuse(clk); + clk_put(clk); + + err1: + release_mem_region(hcd->rsrc_start, hcd->rsrc_len); + + err0: + usb_put_hcd(hcd); + return retval; +} + +/*-------------------------------------------------------------------------*/ + +static int +ohci_s3c2410_start (struct usb_hcd *hcd) +{ + struct ohci_hcd *ohci = hcd_to_ohci (hcd); + int ret; + + if ((ret = ohci_init(ohci)) < 0) + return ret; + + if ((ret = ohci_run (ohci)) < 0) { + err ("can't start %s", hcd->self.bus_name); + ohci_stop (hcd); + return ret; + } + + return 0; +} + + +static const struct hc_driver ohci_s3c2410_hc_driver = { + .description = hcd_name, + .product_desc = "S3C24XX OHCI", + .hcd_priv_size = sizeof(struct ohci_hcd), + + /* + * generic hardware linkage + */ + .irq = ohci_irq, + .flags = HCD_USB11 | HCD_MEMORY, + + /* + * basic lifecycle operations + */ + .start = ohci_s3c2410_start, + .stop = ohci_stop, + + /* + * managing i/o requests and associated device resources + */ + .urb_enqueue = ohci_urb_enqueue, + .urb_dequeue = ohci_urb_dequeue, + .endpoint_disable = ohci_endpoint_disable, + + /* + * scheduling support + */ + .get_frame_number = ohci_get_frame, + + /* + * root hub support + */ + .hub_status_data = ohci_s3c2410_hub_status_data, + .hub_control = ohci_s3c2410_hub_control, + +#if defined(CONFIG_USB_SUSPEND) && 0 + .hub_suspend = ohci_hub_suspend, + .hub_resume = ohci_hub_resume, +#endif +}; + +/* device driver */ + +static int ohci_hcd_s3c2410_drv_probe(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + return usb_hcd_s3c2410_probe(&ohci_s3c2410_hc_driver, pdev); +} + +static int ohci_hcd_s3c2410_drv_remove(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct usb_hcd *hcd = dev_get_drvdata(dev); + + usb_hcd_s3c2410_remove(hcd, pdev); + return 0; +} + +static struct device_driver ohci_hcd_s3c2410_driver = { + .name = "s3c2410-ohci", + .bus = &platform_bus_type, + .probe = ohci_hcd_s3c2410_drv_probe, + .remove = ohci_hcd_s3c2410_drv_remove, + /*.suspend = ohci_hcd_s3c2410_drv_suspend, */ + /*.resume = ohci_hcd_s3c2410_drv_resume, */ +}; + +static int __init ohci_hcd_s3c2410_init (void) +{ + return driver_register(&ohci_hcd_s3c2410_driver); +} + +static void __exit ohci_hcd_s3c2410_cleanup (void) +{ + driver_unregister(&ohci_hcd_s3c2410_driver); +} + +module_init (ohci_hcd_s3c2410_init); +module_exit (ohci_hcd_s3c2410_cleanup); -- 2.20.1