From 3e73148406c67615bbe8d166d2c22efc3995e305 Mon Sep 17 00:00:00 2001 From: Liad Kaufman Date: Wed, 3 May 2017 18:47:46 +0300 Subject: [PATCH] iwlwifi: mvm: fix fw monitor 7000 HW recollecting To stop and start the FW monitor in the 7000 HW family we need to use a different bit, otherwise after stopping it for the first time - it won't get restarted. Use the correct bitmask. Note: This fix is only for DRAM collection mode. For other modes, an additional fix will be needed. Signed-off-by: Liad Kaufman Signed-off-by: Luca Coelho --- drivers/net/wireless/intel/iwlwifi/mvm/ops.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/ops.c b/drivers/net/wireless/intel/iwlwifi/mvm/ops.c index 3a8c95162811..4e66cc662120 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/ops.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/ops.c @@ -1181,9 +1181,13 @@ static void iwl_mvm_fw_error_dump_wk(struct work_struct *work) /* start recording again if the firmware is not crashed */ if (!test_bit(STATUS_FW_ERROR, &mvm->trans->status) && - mvm->fw->dbg_dest_tlv) + mvm->fw->dbg_dest_tlv) { iwl_clear_bits_prph(mvm->trans, MON_BUFF_SAMPLE_CTL, 0x100); + iwl_clear_bits_prph(mvm->trans, + MON_BUFF_SAMPLE_CTL, 0x1); + iwl_set_bits_prph(mvm->trans, MON_BUFF_SAMPLE_CTL, 0x1); + } } else { u32 in_sample = iwl_read_prph(mvm->trans, DBGC_IN_SAMPLE); u32 out_ctrl = iwl_read_prph(mvm->trans, DBGC_OUT_CTRL); -- 2.20.1