From 3e2b0af411d4bf85bc0fbc385756fd5968adb9fd Mon Sep 17 00:00:00 2001 From: Jerome Brunet Date: Mon, 2 Oct 2017 14:27:42 +0200 Subject: [PATCH] mmc: meson-gx: fix rx phase reset Resetting the phase when POWER_ON is set the set_ios() call means that the phase is reset almost every time the set_ios() is called, while the expected behavior was to reset the phase on a power cycle. This had gone unnoticed until now because in all mode (except hs400) the tuning is done after the last to set_ios(). In such case, the tuning result is used anyway. In HS400, there are a few calls to set_ios() after the tuning is done, overwriting the tuning result. Resetting the phase on POWER_UP instead of POWER_ON solve the problem. Fixes: d341ca88eead ("mmc: meson-gx: rework tuning function") Signed-off-by: Jerome Brunet Reviewed-by: Kevin Hilman Signed-off-by: Ulf Hansson --- drivers/mmc/host/meson-gx-mmc.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/mmc/host/meson-gx-mmc.c b/drivers/mmc/host/meson-gx-mmc.c index 421c8719c202..08a55c2e96e1 100644 --- a/drivers/mmc/host/meson-gx-mmc.c +++ b/drivers/mmc/host/meson-gx-mmc.c @@ -745,6 +745,10 @@ static void meson_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) case MMC_POWER_UP: if (!IS_ERR(mmc->supply.vmmc)) mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, ios->vdd); + + /* Reset rx phase */ + clk_set_phase(host->rx_clk, 0); + break; case MMC_POWER_ON: @@ -758,8 +762,6 @@ static void meson_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) host->vqmmc_enabled = true; } - /* Reset rx phase */ - clk_set_phase(host->rx_clk, 0); break; } -- 2.20.1