From 3dcc2f4142610cc7212a757348d45f1e815927c9 Mon Sep 17 00:00:00 2001 From: Emil Tantilov Date: Wed, 29 May 2013 06:23:05 +0000 Subject: [PATCH] ixgbe: fix semaphore lock for I2C read/writes on 82598 ixgbe_read/write_i2c_phy_82598() does not hold the SWFW_SYNC semaphore for the entire function. Instead the lock is held only during the phy.ops.read/write_reg operations. As result when the function is being called simultaneously the I2C read/writes can be corrupted. The following patch introduces the SWFW_SYNC semaphore for the entire ixgbe_read/write_i2c_phy_82598() function. To accomplish this I had to create 2 separate functions: ixgbe_read_phy_reg_mdi() ixgbe_write_phy_reg_mdi() Those functions are identical to ixgbe_read/write_phy_reg_generic() sans the locking, and can be used in ixgbe_read/write_i2c_phy_82598() with the SWFW_SYNC semaphore being held. Signed-off-by: Emil Tantilov Tested-by: Phil Schmitt Signed-off-by: Jeff Kirsher --- .../net/ethernet/intel/ixgbe/ixgbe_82598.c | 32 +- drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c | 292 +++++++++--------- drivers/net/ethernet/intel/ixgbe/ixgbe_phy.h | 4 + drivers/net/ethernet/intel/ixgbe/ixgbe_type.h | 2 + 4 files changed, 182 insertions(+), 148 deletions(-) diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c index 4a5bfb6b3af0..d011d5c3c856 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c @@ -1018,8 +1018,17 @@ static s32 ixgbe_read_i2c_phy_82598(struct ixgbe_hw *hw, u8 dev_addr, u16 sfp_addr = 0; u16 sfp_data = 0; u16 sfp_stat = 0; + u16 gssr; u32 i; + if (IXGBE_READ_REG(hw, IXGBE_STATUS) & IXGBE_STATUS_LAN_ID_1) + gssr = IXGBE_GSSR_PHY1_SM; + else + gssr = IXGBE_GSSR_PHY0_SM; + + if (hw->mac.ops.acquire_swfw_sync(hw, gssr) != 0) + return IXGBE_ERR_SWFW_SYNC; + if (hw->phy.type == ixgbe_phy_nl) { /* * phy SDA/SCL registers are at addresses 0xC30A to @@ -1028,17 +1037,17 @@ static s32 ixgbe_read_i2c_phy_82598(struct ixgbe_hw *hw, u8 dev_addr, */ sfp_addr = (dev_addr << 8) + byte_offset; sfp_addr = (sfp_addr | IXGBE_I2C_EEPROM_READ_MASK); - hw->phy.ops.write_reg(hw, - IXGBE_MDIO_PMA_PMD_SDA_SCL_ADDR, - MDIO_MMD_PMAPMD, - sfp_addr); + hw->phy.ops.write_reg_mdi(hw, + IXGBE_MDIO_PMA_PMD_SDA_SCL_ADDR, + MDIO_MMD_PMAPMD, + sfp_addr); /* Poll status */ for (i = 0; i < 100; i++) { - hw->phy.ops.read_reg(hw, - IXGBE_MDIO_PMA_PMD_SDA_SCL_STAT, - MDIO_MMD_PMAPMD, - &sfp_stat); + hw->phy.ops.read_reg_mdi(hw, + IXGBE_MDIO_PMA_PMD_SDA_SCL_STAT, + MDIO_MMD_PMAPMD, + &sfp_stat); sfp_stat = sfp_stat & IXGBE_I2C_EEPROM_STATUS_MASK; if (sfp_stat != IXGBE_I2C_EEPROM_STATUS_IN_PROGRESS) break; @@ -1052,8 +1061,8 @@ static s32 ixgbe_read_i2c_phy_82598(struct ixgbe_hw *hw, u8 dev_addr, } /* Read data */ - hw->phy.ops.read_reg(hw, IXGBE_MDIO_PMA_PMD_SDA_SCL_DATA, - MDIO_MMD_PMAPMD, &sfp_data); + hw->phy.ops.read_reg_mdi(hw, IXGBE_MDIO_PMA_PMD_SDA_SCL_DATA, + MDIO_MMD_PMAPMD, &sfp_data); *eeprom_data = (u8)(sfp_data >> 8); } else { @@ -1061,6 +1070,7 @@ static s32 ixgbe_read_i2c_phy_82598(struct ixgbe_hw *hw, u8 dev_addr, } out: + hw->mac.ops.release_swfw_sync(hw, gssr); return status; } @@ -1326,6 +1336,8 @@ static struct ixgbe_phy_operations phy_ops_82598 = { .reset = &ixgbe_reset_phy_generic, .read_reg = &ixgbe_read_phy_reg_generic, .write_reg = &ixgbe_write_phy_reg_generic, + .read_reg_mdi = &ixgbe_read_phy_reg_mdi, + .write_reg_mdi = &ixgbe_write_phy_reg_mdi, .setup_link = &ixgbe_setup_phy_link_generic, .setup_link_speed = &ixgbe_setup_phy_link_speed_generic, .read_i2c_sff8472 = &ixgbe_read_i2c_sff8472_82598, diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c index e5691ccbce9d..71f554a3bcc2 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c @@ -203,8 +203,84 @@ out: return status; } +/** + * ixgbe_read_phy_mdi - Reads a value from a specified PHY register without + * the SWFW lock + * @hw: pointer to hardware structure + * @reg_addr: 32 bit address of PHY register to read + * @phy_data: Pointer to read data from PHY register + **/ +s32 ixgbe_read_phy_reg_mdi(struct ixgbe_hw *hw, u32 reg_addr, u32 device_type, + u16 *phy_data) +{ + u32 i, data, command; + + /* Setup and write the address cycle command */ + command = ((reg_addr << IXGBE_MSCA_NP_ADDR_SHIFT) | + (device_type << IXGBE_MSCA_DEV_TYPE_SHIFT) | + (hw->phy.mdio.prtad << IXGBE_MSCA_PHY_ADDR_SHIFT) | + (IXGBE_MSCA_ADDR_CYCLE | IXGBE_MSCA_MDI_COMMAND)); + + IXGBE_WRITE_REG(hw, IXGBE_MSCA, command); + + /* Check every 10 usec to see if the address cycle completed. + * The MDI Command bit will clear when the operation is + * complete + */ + for (i = 0; i < IXGBE_MDIO_COMMAND_TIMEOUT; i++) { + udelay(10); + + command = IXGBE_READ_REG(hw, IXGBE_MSCA); + if ((command & IXGBE_MSCA_MDI_COMMAND) == 0) + break; + } + + + if ((command & IXGBE_MSCA_MDI_COMMAND) != 0) { + hw_dbg(hw, "PHY address command did not complete.\n"); + return IXGBE_ERR_PHY; + } + + /* Address cycle complete, setup and write the read + * command + */ + command = ((reg_addr << IXGBE_MSCA_NP_ADDR_SHIFT) | + (device_type << IXGBE_MSCA_DEV_TYPE_SHIFT) | + (hw->phy.mdio.prtad << IXGBE_MSCA_PHY_ADDR_SHIFT) | + (IXGBE_MSCA_READ | IXGBE_MSCA_MDI_COMMAND)); + + IXGBE_WRITE_REG(hw, IXGBE_MSCA, command); + + /* Check every 10 usec to see if the address cycle + * completed. The MDI Command bit will clear when the + * operation is complete + */ + for (i = 0; i < IXGBE_MDIO_COMMAND_TIMEOUT; i++) { + udelay(10); + + command = IXGBE_READ_REG(hw, IXGBE_MSCA); + if ((command & IXGBE_MSCA_MDI_COMMAND) == 0) + break; + } + + if ((command & IXGBE_MSCA_MDI_COMMAND) != 0) { + hw_dbg(hw, "PHY read command didn't complete\n"); + return IXGBE_ERR_PHY; + } + + /* Read operation is complete. Get the data + * from MSRWD + */ + data = IXGBE_READ_REG(hw, IXGBE_MSRWD); + data >>= IXGBE_MSRWD_READ_DATA_SHIFT; + *phy_data = (u16)(data); + + return 0; +} + /** * ixgbe_read_phy_reg_generic - Reads a value from a specified PHY register + * using the SWFW lock - this function is needed in most cases * @hw: pointer to hardware structure * @reg_addr: 32 bit address of PHY register to read * @phy_data: Pointer to read data from PHY register @@ -212,10 +288,7 @@ out: s32 ixgbe_read_phy_reg_generic(struct ixgbe_hw *hw, u32 reg_addr, u32 device_type, u16 *phy_data) { - u32 command; - u32 i; - u32 data; - s32 status = 0; + s32 status; u16 gssr; if (IXGBE_READ_REG(hw, IXGBE_STATUS) & IXGBE_STATUS_LAN_ID_1) @@ -223,86 +296,93 @@ s32 ixgbe_read_phy_reg_generic(struct ixgbe_hw *hw, u32 reg_addr, else gssr = IXGBE_GSSR_PHY0_SM; - if (hw->mac.ops.acquire_swfw_sync(hw, gssr) != 0) + if (hw->mac.ops.acquire_swfw_sync(hw, gssr) == 0) { + status = ixgbe_read_phy_reg_mdi(hw, reg_addr, device_type, + phy_data); + hw->mac.ops.release_swfw_sync(hw, gssr); + } else { status = IXGBE_ERR_SWFW_SYNC; + } - if (status == 0) { - /* Setup and write the address cycle command */ - command = ((reg_addr << IXGBE_MSCA_NP_ADDR_SHIFT) | - (device_type << IXGBE_MSCA_DEV_TYPE_SHIFT) | - (hw->phy.mdio.prtad << IXGBE_MSCA_PHY_ADDR_SHIFT) | - (IXGBE_MSCA_ADDR_CYCLE | IXGBE_MSCA_MDI_COMMAND)); + return status; +} - IXGBE_WRITE_REG(hw, IXGBE_MSCA, command); +/** + * ixgbe_write_phy_reg_mdi - Writes a value to specified PHY register + * without SWFW lock + * @hw: pointer to hardware structure + * @reg_addr: 32 bit PHY register to write + * @device_type: 5 bit device type + * @phy_data: Data to write to the PHY register + **/ +s32 ixgbe_write_phy_reg_mdi(struct ixgbe_hw *hw, u32 reg_addr, + u32 device_type, u16 phy_data) +{ + u32 i, command; - /* - * Check every 10 usec to see if the address cycle completed. - * The MDI Command bit will clear when the operation is - * complete - */ - for (i = 0; i < IXGBE_MDIO_COMMAND_TIMEOUT; i++) { - udelay(10); + /* Put the data in the MDI single read and write data register*/ + IXGBE_WRITE_REG(hw, IXGBE_MSRWD, (u32)phy_data); - command = IXGBE_READ_REG(hw, IXGBE_MSCA); + /* Setup and write the address cycle command */ + command = ((reg_addr << IXGBE_MSCA_NP_ADDR_SHIFT) | + (device_type << IXGBE_MSCA_DEV_TYPE_SHIFT) | + (hw->phy.mdio.prtad << IXGBE_MSCA_PHY_ADDR_SHIFT) | + (IXGBE_MSCA_ADDR_CYCLE | IXGBE_MSCA_MDI_COMMAND)); - if ((command & IXGBE_MSCA_MDI_COMMAND) == 0) - break; - } + IXGBE_WRITE_REG(hw, IXGBE_MSCA, command); - if ((command & IXGBE_MSCA_MDI_COMMAND) != 0) { - hw_dbg(hw, "PHY address command did not complete.\n"); - status = IXGBE_ERR_PHY; - } + /* + * Check every 10 usec to see if the address cycle completed. + * The MDI Command bit will clear when the operation is + * complete + */ + for (i = 0; i < IXGBE_MDIO_COMMAND_TIMEOUT; i++) { + udelay(10); - if (status == 0) { - /* - * Address cycle complete, setup and write the read - * command - */ - command = ((reg_addr << IXGBE_MSCA_NP_ADDR_SHIFT) | - (device_type << IXGBE_MSCA_DEV_TYPE_SHIFT) | - (hw->phy.mdio.prtad << - IXGBE_MSCA_PHY_ADDR_SHIFT) | - (IXGBE_MSCA_READ | IXGBE_MSCA_MDI_COMMAND)); - - IXGBE_WRITE_REG(hw, IXGBE_MSCA, command); - - /* - * Check every 10 usec to see if the address cycle - * completed. The MDI Command bit will clear when the - * operation is complete - */ - for (i = 0; i < IXGBE_MDIO_COMMAND_TIMEOUT; i++) { - udelay(10); - - command = IXGBE_READ_REG(hw, IXGBE_MSCA); - - if ((command & IXGBE_MSCA_MDI_COMMAND) == 0) - break; - } + command = IXGBE_READ_REG(hw, IXGBE_MSCA); + if ((command & IXGBE_MSCA_MDI_COMMAND) == 0) + break; + } - if ((command & IXGBE_MSCA_MDI_COMMAND) != 0) { - hw_dbg(hw, "PHY read command didn't complete\n"); - status = IXGBE_ERR_PHY; - } else { - /* - * Read operation is complete. Get the data - * from MSRWD - */ - data = IXGBE_READ_REG(hw, IXGBE_MSRWD); - data >>= IXGBE_MSRWD_READ_DATA_SHIFT; - *phy_data = (u16)(data); - } - } + if ((command & IXGBE_MSCA_MDI_COMMAND) != 0) { + hw_dbg(hw, "PHY address cmd didn't complete\n"); + return IXGBE_ERR_PHY; + } - hw->mac.ops.release_swfw_sync(hw, gssr); + /* + * Address cycle complete, setup and write the write + * command + */ + command = ((reg_addr << IXGBE_MSCA_NP_ADDR_SHIFT) | + (device_type << IXGBE_MSCA_DEV_TYPE_SHIFT) | + (hw->phy.mdio.prtad << IXGBE_MSCA_PHY_ADDR_SHIFT) | + (IXGBE_MSCA_WRITE | IXGBE_MSCA_MDI_COMMAND)); + + IXGBE_WRITE_REG(hw, IXGBE_MSCA, command); + + /* Check every 10 usec to see if the address cycle + * completed. The MDI Command bit will clear when the + * operation is complete + */ + for (i = 0; i < IXGBE_MDIO_COMMAND_TIMEOUT; i++) { + udelay(10); + + command = IXGBE_READ_REG(hw, IXGBE_MSCA); + if ((command & IXGBE_MSCA_MDI_COMMAND) == 0) + break; } - return status; + if ((command & IXGBE_MSCA_MDI_COMMAND) != 0) { + hw_dbg(hw, "PHY write cmd didn't complete\n"); + return IXGBE_ERR_PHY; + } + + return 0; } /** * ixgbe_write_phy_reg_generic - Writes a value to specified PHY register + * using SWFW lock- this function is needed in most cases * @hw: pointer to hardware structure * @reg_addr: 32 bit PHY register to write * @device_type: 5 bit device type @@ -311,9 +391,7 @@ s32 ixgbe_read_phy_reg_generic(struct ixgbe_hw *hw, u32 reg_addr, s32 ixgbe_write_phy_reg_generic(struct ixgbe_hw *hw, u32 reg_addr, u32 device_type, u16 phy_data) { - u32 command; - u32 i; - s32 status = 0; + s32 status; u16 gssr; if (IXGBE_READ_REG(hw, IXGBE_STATUS) & IXGBE_STATUS_LAN_ID_1) @@ -321,74 +399,12 @@ s32 ixgbe_write_phy_reg_generic(struct ixgbe_hw *hw, u32 reg_addr, else gssr = IXGBE_GSSR_PHY0_SM; - if (hw->mac.ops.acquire_swfw_sync(hw, gssr) != 0) - status = IXGBE_ERR_SWFW_SYNC; - - if (status == 0) { - /* Put the data in the MDI single read and write data register*/ - IXGBE_WRITE_REG(hw, IXGBE_MSRWD, (u32)phy_data); - - /* Setup and write the address cycle command */ - command = ((reg_addr << IXGBE_MSCA_NP_ADDR_SHIFT) | - (device_type << IXGBE_MSCA_DEV_TYPE_SHIFT) | - (hw->phy.mdio.prtad << IXGBE_MSCA_PHY_ADDR_SHIFT) | - (IXGBE_MSCA_ADDR_CYCLE | IXGBE_MSCA_MDI_COMMAND)); - - IXGBE_WRITE_REG(hw, IXGBE_MSCA, command); - - /* - * Check every 10 usec to see if the address cycle completed. - * The MDI Command bit will clear when the operation is - * complete - */ - for (i = 0; i < IXGBE_MDIO_COMMAND_TIMEOUT; i++) { - udelay(10); - - command = IXGBE_READ_REG(hw, IXGBE_MSCA); - - if ((command & IXGBE_MSCA_MDI_COMMAND) == 0) - break; - } - - if ((command & IXGBE_MSCA_MDI_COMMAND) != 0) { - hw_dbg(hw, "PHY address cmd didn't complete\n"); - status = IXGBE_ERR_PHY; - } - - if (status == 0) { - /* - * Address cycle complete, setup and write the write - * command - */ - command = ((reg_addr << IXGBE_MSCA_NP_ADDR_SHIFT) | - (device_type << IXGBE_MSCA_DEV_TYPE_SHIFT) | - (hw->phy.mdio.prtad << - IXGBE_MSCA_PHY_ADDR_SHIFT) | - (IXGBE_MSCA_WRITE | IXGBE_MSCA_MDI_COMMAND)); - - IXGBE_WRITE_REG(hw, IXGBE_MSCA, command); - - /* - * Check every 10 usec to see if the address cycle - * completed. The MDI Command bit will clear when the - * operation is complete - */ - for (i = 0; i < IXGBE_MDIO_COMMAND_TIMEOUT; i++) { - udelay(10); - - command = IXGBE_READ_REG(hw, IXGBE_MSCA); - - if ((command & IXGBE_MSCA_MDI_COMMAND) == 0) - break; - } - - if ((command & IXGBE_MSCA_MDI_COMMAND) != 0) { - hw_dbg(hw, "PHY address cmd didn't complete\n"); - status = IXGBE_ERR_PHY; - } - } - + if (hw->mac.ops.acquire_swfw_sync(hw, gssr) == 0) { + status = ixgbe_write_phy_reg_mdi(hw, reg_addr, device_type, + phy_data); hw->mac.ops.release_swfw_sync(hw, gssr); + } else { + status = IXGBE_ERR_SWFW_SYNC; } return status; diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.h b/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.h index 2d3433fedfb0..647203a5546c 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.h +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.h @@ -107,6 +107,10 @@ s32 ixgbe_read_phy_reg_generic(struct ixgbe_hw *hw, u32 reg_addr, u32 device_type, u16 *phy_data); s32 ixgbe_write_phy_reg_generic(struct ixgbe_hw *hw, u32 reg_addr, u32 device_type, u16 phy_data); +s32 ixgbe_read_phy_reg_mdi(struct ixgbe_hw *hw, u32 reg_addr, + u32 device_type, u16 *phy_data); +s32 ixgbe_write_phy_reg_mdi(struct ixgbe_hw *hw, u32 reg_addr, + u32 device_type, u16 phy_data); s32 ixgbe_setup_phy_link_generic(struct ixgbe_hw *hw); s32 ixgbe_setup_phy_link_speed_generic(struct ixgbe_hw *hw, ixgbe_link_speed speed, diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h b/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h index 8968ea0ea141..4c91ea602da9 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h @@ -2886,6 +2886,8 @@ struct ixgbe_phy_operations { s32 (*reset)(struct ixgbe_hw *); s32 (*read_reg)(struct ixgbe_hw *, u32, u32, u16 *); s32 (*write_reg)(struct ixgbe_hw *, u32, u32, u16); + s32 (*read_reg_mdi)(struct ixgbe_hw *, u32, u32, u16 *); + s32 (*write_reg_mdi)(struct ixgbe_hw *, u32, u32, u16); s32 (*setup_link)(struct ixgbe_hw *); s32 (*setup_link_speed)(struct ixgbe_hw *, ixgbe_link_speed, bool); s32 (*check_link)(struct ixgbe_hw *, ixgbe_link_speed *, bool *); -- 2.20.1