From 3d6e81c0c9827c86fd3fe4bcbc44155b1401f80e Mon Sep 17 00:00:00 2001 From: =?utf8?q?Uwe=20Kleine-K=C3=B6nig?= Date: Tue, 10 Feb 2015 19:59:59 +0100 Subject: [PATCH] mtd: mxc-nand: Implement support for PARAM command MIME-Version: 1.0 Content-Type: text/plain; charset=utf8 Content-Transfer-Encoding: 8bit The mxc-nand driver never supported the PARAM command to read out the ONFI parameter page and so always relied on probing my manufacturer and device id (as provided by the READID command). This patch implements reading out the first parameter page copy at least which should be good enough in practise. This makes the boot log change from nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xb1 nand: Micron NAND 128MiB 1,8V 16-bit to nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xb1 nand: Micron MT29F1G16ABBDAH4 on my machine. Signed-off-by: Uwe Kleine-König Signed-off-by: Brian Norris --- drivers/mtd/nand/mxc_nand.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/mtd/nand/mxc_nand.c b/drivers/mtd/nand/mxc_nand.c index 0afe5904a337..0083b4ee4f33 100644 --- a/drivers/mtd/nand/mxc_nand.c +++ b/drivers/mtd/nand/mxc_nand.c @@ -1152,6 +1152,13 @@ static void mxc_nand_command(struct mtd_info *mtd, unsigned command, command, column); mxc_do_addr_cycle(mtd, column, page_addr); + break; + case NAND_CMD_PARAM: + host->devtype_data->send_cmd(host, command, false); + mxc_do_addr_cycle(mtd, column, page_addr); + host->devtype_data->send_page(mtd, NFC_OUTPUT); + memcpy32_fromio(host->data_buf, host->main_area0, 512); + host->buf_start = 0; break; } } -- 2.20.1