From 3caa89e933646263cb4efedd5660dba00a107b51 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Fri, 15 Jul 2011 17:35:36 +0100 Subject: [PATCH] gma500: resync with Medfield progress Signed-off-by: Alan Cox Signed-off-by: Greg Kroah-Hartman --- drivers/staging/gma500/mdfld_dsi_dbi.c | 369 ++++++---------- drivers/staging/gma500/mdfld_dsi_dbi.h | 21 +- drivers/staging/gma500/mdfld_dsi_dbi_dpu.h | 3 - drivers/staging/gma500/mdfld_dsi_dpi.c | 319 +++----------- drivers/staging/gma500/mdfld_dsi_dpi.h | 6 +- drivers/staging/gma500/mdfld_dsi_output.c | 250 ++++++----- drivers/staging/gma500/mdfld_dsi_output.h | 203 +-------- drivers/staging/gma500/mdfld_dsi_pkg_sender.c | 403 +++++++++++++++++- drivers/staging/gma500/mdfld_dsi_pkg_sender.h | 26 ++ drivers/staging/gma500/mdfld_intel_display.c | 6 +- drivers/staging/gma500/mdfld_output.c | 8 +- drivers/staging/gma500/mdfld_output.h | 41 -- drivers/staging/gma500/mdfld_pyr_cmd.c | 18 +- drivers/staging/gma500/mdfld_tmd_vid.c | 62 +++ drivers/staging/gma500/mdfld_tpo_cmd.c | 64 ++- drivers/staging/gma500/mrst_lvds.c | 35 +- drivers/staging/gma500/psb_drv.h | 7 +- 17 files changed, 917 insertions(+), 924 deletions(-) diff --git a/drivers/staging/gma500/mdfld_dsi_dbi.c b/drivers/staging/gma500/mdfld_dsi_dbi.c index 1421f497d0ab..06424f945bc8 100644 --- a/drivers/staging/gma500/mdfld_dsi_dbi.c +++ b/drivers/staging/gma500/mdfld_dsi_dbi.c @@ -39,29 +39,10 @@ extern int gfxrtdelay; int enter_dsr; struct mdfld_dsi_dbi_output *gdbi_output; extern bool gbgfxsuspended; +extern int enable_gfx_rtpm; extern int gfxrtdelay; -#ifdef CONFIG_GFX_RTPM -static void psb_runtimepm_wq_handler(struct work_struct *work); -DECLARE_DELAYED_WORK(rtpm_work, psb_runtimepm_wq_handler); - -void psb_runtimepm_wq_handler(struct work_struct *work) -{ - struct drm_psb_private *dev_priv = gpDrmDevice->dev_private; - - if (drm_psb_ospm && !enable_gfx_rtpm) { - pr_info("Enable GFX runtime_pm\n"); - dev_priv->rpm_enabled = 1; - enable_gfx_rtpm = 1; - - pm_runtime_enable(&gpDrmDevice->pdev->dev); - pm_runtime_set_active(&gpDrmDevice->pdev->dev); - - pm_runtime_allow(&gpDrmDevice->pdev->dev); - } -} -#endif - +#define MDFLD_DSR_MAX_IDLE_COUNT 2 /* * set refreshing area @@ -80,8 +61,8 @@ int mdfld_dsi_dbi_update_area(struct mdfld_dsi_dbi_output *dbi_output, return -EINVAL; } - /*set column*/ - cmd = set_column_address; + /* Set column */ + cmd = DCS_SET_COLUMN_ADDRESS; param[0] = x1 >> 8; param[1] = x1; param[2] = x2 >> 8; @@ -98,8 +79,8 @@ int mdfld_dsi_dbi_update_area(struct mdfld_dsi_dbi_output *dbi_output, goto err_out; } - /*set page*/ - cmd = set_page_addr; + /* Set page */ + cmd = DCS_SET_PAGE_ADDRESS; param[0] = y1 >> 8; param[1] = y1; param[2] = y2 >> 8; @@ -139,56 +120,46 @@ int mdfld_dsi_dbi_update_power(struct mdfld_dsi_dbi_output *dbi_output, int mode) { struct drm_device *dev = dbi_output->dev; - struct drm_psb_private *dev_priv = dev->dev_private; struct mdfld_dsi_pkg_sender *sender = mdfld_dsi_encoder_get_pkg_sender(&dbi_output->base); u8 param = 0; u32 err = 0; - if (!dev_priv->dispstatus && mode != DRM_MODE_DPMS_ON) { - dev_err(dev->dev, "%s: already OFF ignoring\n", __func__); - return 0; - } - if (dev_priv->dispstatus && mode == DRM_MODE_DPMS_ON) { - dev_err(dev->dev, "%s: already ON ignoring\n", __func__); - return 0; - } - if (!sender) { WARN_ON(1); return -EINVAL; } if (mode == DRM_MODE_DPMS_ON) { - /*exit sleep mode*/ + /* Exit sleep mode */ err = mdfld_dsi_send_dcs(sender, - exit_sleep_mode, + DCS_EXIT_SLEEP_MODE, NULL, 0, CMD_DATA_SRC_SYSTEM_MEM, MDFLD_DSI_QUEUE_PACKAGE); if (err) { dev_err(dev->dev, "DCS 0x%x sent failed\n", - exit_sleep_mode); + DCS_EXIT_SLEEP_MODE); goto power_err; } - /*set display on*/ + /* Set display on */ err = mdfld_dsi_send_dcs(sender, - set_display_on, + DCS_SET_DISPLAY_ON, NULL, 0, CMD_DATA_SRC_SYSTEM_MEM, MDFLD_DSI_QUEUE_PACKAGE); if (err) { dev_err(dev->dev, "DCS 0x%x sent failed\n", - set_display_on); + DCS_SET_DISPLAY_ON); goto power_err; } /* set tear effect on */ err = mdfld_dsi_send_dcs(sender, - set_tear_on, + DCS_SET_TEAR_ON, ¶m, 1, CMD_DATA_SRC_SYSTEM_MEM, @@ -203,53 +174,53 @@ int mdfld_dsi_dbi_update_power(struct mdfld_dsi_dbi_output *dbi_output, * FIXME: remove this later */ err = mdfld_dsi_send_dcs(sender, - write_mem_start, + DCS_WRITE_MEM_START, NULL, 0, CMD_DATA_SRC_PIPE, MDFLD_DSI_QUEUE_PACKAGE); if (err) { dev_err(dev->dev, "DCS 0x%x sent failed\n", - set_display_on); + DCS_WRITE_MEM_START); goto power_err; } } else { - /*set tear effect off */ + /* Set tear effect off */ err = mdfld_dsi_send_dcs(sender, - set_tear_off, + DCS_SET_TEAR_OFF, NULL, 0, CMD_DATA_SRC_SYSTEM_MEM, MDFLD_DSI_QUEUE_PACKAGE); if (err) { dev_err(dev->dev, "DCS 0x%x sent failed\n", - set_tear_off); + DCS_SET_TEAR_OFF); goto power_err; } - /*set display off*/ + /* Turn display off */ err = mdfld_dsi_send_dcs(sender, - set_display_off, + DCS_SET_DISPLAY_OFF, NULL, 0, CMD_DATA_SRC_SYSTEM_MEM, MDFLD_DSI_QUEUE_PACKAGE); if (err) { dev_err(dev->dev, "DCS 0x%x sent failed\n", - set_display_off); + DCS_SET_DISPLAY_OFF); goto power_err; } - /*enter sleep mode*/ + /* Now enter sleep mode */ err = mdfld_dsi_send_dcs(sender, - enter_sleep_mode, + DCS_ENTER_SLEEP_MODE, NULL, 0, CMD_DATA_SRC_SYSTEM_MEM, MDFLD_DSI_QUEUE_PACKAGE); if (err) { dev_err(dev->dev, "DCS 0x%x sent failed\n", - enter_sleep_mode); + DCS_ENTER_SLEEP_MODE); goto power_err; } } @@ -283,7 +254,6 @@ int mdfld_dsi_dbi_send_dcs(struct mdfld_dsi_dbi_output *dbi_output, return ret; } - /* * Enter DSR */ @@ -299,11 +269,12 @@ void mdfld_dsi_dbi_enter_dsr(struct mdfld_dsi_dbi_output *dbi_output, int pipe) u32 pipeconf_reg = PIPEACONF; u32 dspcntr_reg = DSPACNTR; - dev_priv->is_in_idle = true; - if (!dbi_output) return; + /* FIXME check if can go */ + dev_priv->is_in_idle = true; + gdbi_output = dbi_output; if ((dbi_output->mode_flags & MODE_SETTING_ON_GOING) || (psb_crtc && psb_crtc->mode_flags & MODE_SETTING_ON_GOING)) @@ -319,16 +290,17 @@ void mdfld_dsi_dbi_enter_dsr(struct mdfld_dsi_dbi_output *dbi_output, int pipe) dev_err(dev->dev, "hw begin failed\n"); return; } - /*disable te interrupts. */ + /* Disable te interrupts */ mdfld_disable_te(dev, pipe); - /*disable plane*/ + /* Disable plane */ reg_val = REG_READ(dspcntr_reg); if (!(reg_val & DISPLAY_PLANE_ENABLE)) { REG_WRITE(dspcntr_reg, reg_val & ~DISPLAY_PLANE_ENABLE); REG_READ(dspcntr_reg); } - /*disable pipe*/ + + /* Disable pipe */ reg_val = REG_READ(pipeconf_reg); if (!(reg_val & DISPLAY_PLANE_ENABLE)) { reg_val &= ~DISPLAY_PLANE_ENABLE; @@ -338,7 +310,7 @@ void mdfld_dsi_dbi_enter_dsr(struct mdfld_dsi_dbi_output *dbi_output, int pipe) mdfldWaitForPipeDisable(dev, pipe); } - /*disable DPLL*/ + /* Disable DPLL */ reg_val = REG_READ(dpll_reg); if (!(reg_val & DPLL_VCO_ENABLE)) { reg_val &= ~DPLL_VCO_ENABLE; @@ -357,10 +329,9 @@ void mdfld_dsi_dbi_enter_dsr(struct mdfld_dsi_dbi_output *dbi_output, int pipe) #ifndef CONFIG_MDFLD_DSI_DPU static void mdfld_dbi_output_exit_dsr(struct mdfld_dsi_dbi_output *dbi_output, - int pipe, void *p_surfaceAddr, bool check_hw_on_only) + int pipe) { struct drm_device *dev = dbi_output->dev; - struct drm_psb_private *dev_priv = dev->dev_private; struct drm_crtc *crtc = dbi_output->base.base.crtc; struct psb_intel_crtc *psb_crtc = (crtc) ? to_psb_intel_crtc(crtc) : NULL; @@ -368,7 +339,6 @@ static void mdfld_dbi_output_exit_dsr(struct mdfld_dsi_dbi_output *dbi_output, u32 dpll_reg = MRST_DPLL_A; u32 pipeconf_reg = PIPEACONF; u32 dspcntr_reg = DSPACNTR; - u32 dspsurf_reg = DSPASURF; u32 reg_offset = 0; /*if mode setting on-going, back off*/ @@ -380,24 +350,17 @@ static void mdfld_dbi_output_exit_dsr(struct mdfld_dsi_dbi_output *dbi_output, dpll_reg = MRST_DPLL_A; pipeconf_reg = PIPECCONF; dspcntr_reg = DSPCCNTR; - dspsurf_reg = DSPCSURF; reg_offset = MIPIC_REG_OFFSET; } - if (check_hw_on_only) { - if (0/* FIXME!ospm_power_is_hw_on(_DISPLAY_ISLAND)*/) { - dev_err(dev->dev, "hw begin failed\n"); - return; - } - } else if (!gma_power_begin(dev, true)) { + if (!gma_power_begin(dev, true)) { dev_err(dev->dev, "hw begin failed\n"); return; } - /*enable DPLL*/ + /* Enable DPLL */ reg_val = REG_READ(dpll_reg); if (!(reg_val & DPLL_VCO_ENABLE)) { - if (reg_val & MDFLD_PWR_GATE_EN) { reg_val &= ~MDFLD_PWR_GATE_EN; REG_WRITE(dpll_reg, reg_val); @@ -415,7 +378,7 @@ static void mdfld_dbi_output_exit_dsr(struct mdfld_dsi_dbi_output *dbi_output, cpu_relax(); } - /*enable pipe*/ + /* Enable pipe */ reg_val = REG_READ(pipeconf_reg); if (!(reg_val & PIPEACONF_ENABLE)) { reg_val |= PIPEACONF_ENABLE; @@ -425,7 +388,7 @@ static void mdfld_dbi_output_exit_dsr(struct mdfld_dsi_dbi_output *dbi_output, mdfldWaitForPipeEnable(dev, pipe); } - /*enable plane*/ + /* Enable plane */ reg_val = REG_READ(dspcntr_reg); if (!(reg_val & DISPLAY_PLANE_ENABLE)) { reg_val |= DISPLAY_PLANE_ENABLE; @@ -434,15 +397,9 @@ static void mdfld_dbi_output_exit_dsr(struct mdfld_dsi_dbi_output *dbi_output, udelay(500); } - /* update the surface base address. */ - if (p_surfaceAddr) - REG_WRITE(dspsurf_reg, *((u32 *)p_surfaceAddr)); - - if (!check_hw_on_only) - gma_power_end(dev); - - /*enable TE interrupt on this pipe*/ + /* Enable TE interrupt on this pipe */ mdfld_enable_te(dev, pipe); + gma_power_end(dev); /*clean IN_DSR flag*/ dbi_output->mode_flags &= ~MODE_SETTING_IN_DSR; @@ -451,33 +408,33 @@ static void mdfld_dbi_output_exit_dsr(struct mdfld_dsi_dbi_output *dbi_output, /* * Exit from DSR */ -void mdfld_dsi_dbi_exit_dsr(struct drm_device *dev, u32 update_src, - void *p_surfaceAddr, bool check_hw_on_only) +void mdfld_dsi_dbi_exit_dsr(struct drm_device *dev, u32 update_src) { struct drm_psb_private *dev_priv = dev->dev_private; struct mdfld_dbi_dsr_info *dsr_info = dev_priv->dbi_dsr_info; struct mdfld_dsi_dbi_output **dbi_output; int i; + int pipe; + /* FIXME can go ? */ dev_priv->is_in_idle = false; dbi_output = dsr_info->dbi_outputs; #ifdef CONFIG_PM_RUNTIME if (!enable_gfx_rtpm) { /* pm_runtime_allow(&gpDrmDevice->pdev->dev); */ -/* schedule_delayed_work(&rtpm_work, 120 * 1000); */ +/* schedule_delayed_work(&rtpm_work, 30 * 1000);*/ /* FIXME: HZ ? */ } #endif - /*for each output, exit dsr*/ + /* For each output, exit dsr */ for (i = 0; i < dsr_info->dbi_output_num; i++) { - /*if panel has been turned off, skip*/ - if (!dbi_output[i]->dbi_panel_on) + /* If panel has been turned off, skip */ + if (!dbi_output[i] || !dbi_output[i]->dbi_panel_on) continue; - if (dbi_output[i]->mode_flags & MODE_SETTING_IN_DSR) { - enter_dsr = 0; - mdfld_dbi_output_exit_dsr(dbi_output[i], dbi_output[i]->channel_num ? 2 : 0, p_surfaceAddr, check_hw_on_only); - } + pipe = dbi_output[i]->channel_num ? 2 : 0; + enter_dsr = 0; + mdfld_dbi_output_exit_dsr(dbi_output[i], pipe); } dev_priv->dsr_fb_update |= update_src; } @@ -496,7 +453,7 @@ static bool mdfld_dbi_is_in_dsr(struct drm_device *dev) return true; } -/* Perodically update dbi panel */ +/* Periodically update dbi panel */ void mdfld_dbi_update_panel(struct drm_device *dev, int pipe) { struct drm_psb_private *dev_priv = dev->dev_private; @@ -504,8 +461,8 @@ void mdfld_dbi_update_panel(struct drm_device *dev, int pipe) struct mdfld_dsi_dbi_output **dbi_outputs; struct mdfld_dsi_dbi_output *dbi_output; int i; - int enter_dsr = 0; - u32 damage_mask = 0; + int can_enter_dsr = 0; + u32 damage_mask; dbi_outputs = dsr_info->dbi_outputs; dbi_output = pipe ? dbi_outputs[1] : dbi_outputs[0]; @@ -514,13 +471,13 @@ void mdfld_dbi_update_panel(struct drm_device *dev, int pipe) return; if (pipe == 0) - damage_mask = dev_priv->dsr_fb_update & (MDFLD_DSR_DAMAGE_MASK_0); + damage_mask = dev_priv->dsr_fb_update & MDFLD_DSR_DAMAGE_MASK_0; else if (pipe == 2) - damage_mask = dev_priv->dsr_fb_update & (MDFLD_DSR_DAMAGE_MASK_2); + damage_mask = dev_priv->dsr_fb_update & MDFLD_DSR_DAMAGE_MASK_2; else return; - /*if FB is damaged and panel is on update on-panel FB*/ + /* If FB is damaged and panel is on update on-panel FB */ if (damage_mask && dbi_output->dbi_panel_on) { dbi_output->dsr_fb_update_done = false; @@ -538,11 +495,24 @@ void mdfld_dbi_update_panel(struct drm_device *dev, int pipe) dbi_output->dsr_idle_count++; } - /*try to enter DSR*/ - if (dbi_outputs[0]->dsr_idle_count > 1 - && dbi_outputs[1]->dsr_idle_count > 1) { + switch (dsr_info->dbi_output_num) { + case 1: + if (dbi_output->dsr_idle_count > MDFLD_DSR_MAX_IDLE_COUNT) + can_enter_dsr = 1; + break; + case 2: + if (dbi_outputs[0]->dsr_idle_count > MDFLD_DSR_MAX_IDLE_COUNT + && dbi_outputs[1]->dsr_idle_count > MDFLD_DSR_MAX_IDLE_COUNT) + can_enter_dsr = 1; + break; + default: + DRM_ERROR("Wrong DBI output number\n"); + } + + /* Try to enter DSR */ + if (can_enter_dsr) { for (i = 0; i < dsr_info->dbi_output_num; i++) { - if (!mdfld_dbi_is_in_dsr(dev) && + if (!mdfld_dbi_is_in_dsr(dev) && dbi_outputs[i] && !(dbi_outputs[i]->mode_flags & MODE_SETTING_ON_GOING)) { mdfld_dsi_dbi_enter_dsr(dbi_outputs[i], dbi_outputs[i]->channel_num ? 2 : 0); @@ -565,61 +535,6 @@ void mdfld_dbi_update_panel(struct drm_device *dev, int pipe) } } -/*timers for DSR*/ -static void mdfld_dsi_dbi_dsr_timer_func(unsigned long data) -{ - struct drm_device *dev = (struct drm_device *)data; - struct drm_psb_private *dev_priv = dev->dev_private; - struct mdfld_dbi_dsr_info *dsr_info = dev_priv->dbi_dsr_info; - struct timer_list *dsr_timer = &dsr_info->dsr_timer; - unsigned long flags; - - mdfld_dbi_update_panel(dev, 0); - - if (dsr_info->dsr_idle_count > 1) - return; - - spin_lock_irqsave(&dsr_info->dsr_timer_lock, flags); - if (!timer_pending(dsr_timer)) { - dsr_timer->expires = jiffies + MDFLD_DSR_DELAY; - add_timer(dsr_timer); - } - spin_unlock_irqrestore(&dsr_info->dsr_timer_lock, flags); -} - -static int mdfld_dsi_dbi_dsr_timer_init(struct drm_device *dev) -{ - struct drm_psb_private *dev_priv = dev->dev_private; - struct mdfld_dbi_dsr_info *dsr_info = dev_priv->dbi_dsr_info; - struct timer_list *dsr_timer = &dsr_info->dsr_timer; - unsigned long flags; - - spin_lock_init(&dsr_info->dsr_timer_lock); - spin_lock_irqsave(&dsr_info->dsr_timer_lock, flags); - - init_timer(dsr_timer); - - dsr_timer->data = (unsigned long)dev; - dsr_timer->function = mdfld_dsi_dbi_dsr_timer_func; - dsr_timer->expires = jiffies + MDFLD_DSR_DELAY; - - spin_unlock_irqrestore(&dsr_info->dsr_timer_lock, flags); - return 0; -} - -void mdfld_dbi_dsr_timer_start(struct mdfld_dbi_dsr_info *dsr_info) -{ - struct timer_list *dsr_timer = &dsr_info->dsr_timer; - unsigned long flags; - - spin_lock_irqsave(&dsr_info->dsr_timer_lock, flags); - if (!timer_pending(dsr_timer)) { - dsr_timer->expires = jiffies + MDFLD_DSR_DELAY; - add_timer(dsr_timer); - } - spin_unlock_irqrestore(&dsr_info->dsr_timer_lock, flags); -} - int mdfld_dbi_dsr_init(struct drm_device *dev) { struct drm_psb_private *dev_priv = dev->dev_private; @@ -643,7 +558,6 @@ void mdfld_dbi_dsr_exit(struct drm_device *dev) struct mdfld_dbi_dsr_info *dsr_info = dev_priv->dbi_dsr_info; if (dsr_info) { - del_timer_sync(&dsr_info->dsr_timer); kfree(dsr_info); dev_priv->dbi_dsr_info = NULL; } @@ -660,13 +574,13 @@ void mdfld_dsi_controller_dbi_init(struct mdfld_dsi_config *dsi_config, dev_dbg(dev->dev, "Init DBI interface on pipe %d...\n", pipe); - /*un-ready device*/ + /* Un-ready device */ REG_WRITE((MIPIA_DEVICE_READY_REG + reg_offset), 0x00000000); - /*init dsi adapter before kicking off*/ + /* Init dsi adapter before kicking off */ REG_WRITE((MIPIA_CONTROL_REG + reg_offset), 0x00000018); - /*TODO: figure out how to setup these registers*/ + /* TODO: figure out how to setup these registers */ REG_WRITE((MIPIA_DPHY_PARAM_REG + reg_offset), 0x150c3408); REG_WRITE((MIPIA_CLK_LANE_SWITCH_TIME_CNT_REG + reg_offset), 0x000a0014); @@ -674,16 +588,16 @@ void mdfld_dsi_controller_dbi_init(struct mdfld_dsi_config *dsi_config, REG_WRITE((MIPIA_DBI_FIFO_THROTTLE_REG + reg_offset), 0x00000001); REG_WRITE((MIPIA_HS_LS_DBI_ENABLE_REG + reg_offset), 0x00000000); - /*enable all interrupts*/ + /* Enable all interrupts */ REG_WRITE((MIPIA_INTR_EN_REG + reg_offset), 0xffffffff); - /*max value: 20 clock cycles of txclkesc*/ + /* Max value: 20 clock cycles of txclkesc */ REG_WRITE((MIPIA_TURN_AROUND_TIMEOUT_REG + reg_offset), 0x0000001f); - /*min 21 txclkesc, max: ffffh*/ + /* Min 21 txclkesc, max: ffffh */ REG_WRITE((MIPIA_DEVICE_RESET_TIMER_REG + reg_offset), 0x0000ffff); - /*min: 7d0 max: 4e20*/ + /* Min: 7d0 max: 4e20 */ REG_WRITE((MIPIA_INIT_COUNT_REG + reg_offset), 0x00000fa0); - /*set up func_prg*/ + /* Set up func_prg */ val |= lane_count; val |= (dsi_config->channel_num << DSI_DBI_VIRT_CHANNEL_OFFSET); val |= DSI_DBI_COLOR_FORMAT_OPTION2; @@ -692,7 +606,7 @@ void mdfld_dsi_controller_dbi_init(struct mdfld_dsi_config *dsi_config, REG_WRITE((MIPIA_HS_TX_TIMEOUT_REG + reg_offset), 0x3fffff); REG_WRITE((MIPIA_LP_RX_TIMEOUT_REG + reg_offset), 0xffff); - /*de-assert dbi_stall when half of DBI FIFO is empty*/ + /* De-assert dbi_stall when half of DBI FIFO is empty */ /* REG_WRITE((MIPIA_DBI_FIFO_THROTTLE_REG + reg_offset), 0x00000000); */ REG_WRITE((MIPIA_HIGH_LOW_SWITCH_COUNT_REG + reg_offset), 0x46); @@ -718,42 +632,6 @@ static const struct drm_encoder_funcs mdfld_dsi_dbi_encoder_funcs = { #endif -static int mdfld_dbi_panel_reset(struct mdfld_dsi_dbi_output *output) -{ - unsigned gpio; - int ret; - - switch (output->channel_num) { - case 0: - gpio = 128; - break; - case 1: - gpio = 34; - break; - default: - pr_err("Invalid output\n"); - return -EINVAL; - } - - ret = gpio_request(gpio, "gfx"); - if (ret) { - pr_err("gpio_rqueset failed\n"); - return ret; - } - - ret = gpio_direction_output(gpio, 1); - if (ret) { - pr_err("gpio_direction_output failed\n"); - goto gpio_error; - } - gpio_get_value(128); -gpio_error: - if (gpio_is_valid(gpio)) - gpio_free(gpio); - - return ret; -} - /* * Init DSI DBI encoder. * Allocate an mdfld_dsi_encoder and attach it to given @dsi_connector @@ -776,13 +654,44 @@ struct mdfld_dsi_encoder *mdfld_dsi_dbi_init(struct drm_device *dev, #else struct mdfld_dbi_dsr_info *dsr_info = dev_priv ? (dev_priv->dbi_dsr_info) : NULL; #endif + u32 data = 0; + int pipe; int ret; - if (!pg || !dsi_connector) { + if (!pg || !dsi_connector || !p_funcs) { WARN_ON(1); return NULL; } + dsi_config = mdfld_dsi_get_config(dsi_connector); + pipe = dsi_connector->pipe; + + /*panel hard-reset*/ + if (p_funcs->reset) { + ret = p_funcs->reset(pipe); + if (ret) { + DRM_ERROR("Panel %d hard-reset failed\n", pipe); + return NULL; + } + } + /* Panel drvIC init */ + if (p_funcs->drv_ic_init) + p_funcs->drv_ic_init(dsi_config, pipe); + + /* Panel power mode detect */ + ret = mdfld_dsi_get_power_mode(dsi_config, + &data, + MDFLD_DSI_HS_TRANSMISSION); + if (ret) { + DRM_ERROR("Panel %d get power mode failed\n", pipe); + dsi_connector->status = connector_status_disconnected; + } else { + DRM_INFO("pipe %d power mode 0x%x\n", pipe, data); + dsi_connector->status = connector_status_connected; + } + + /*TODO: get panel info from DDB*/ + dbi_output = kzalloc(sizeof(struct mdfld_dsi_dbi_output), GFP_KERNEL); if (!dbi_output) { dev_err(dev->dev, "No memory\n"); @@ -802,23 +711,10 @@ struct mdfld_dsi_encoder *mdfld_dsi_dbi_init(struct drm_device *dev, dbi_output->dev = dev; dbi_output->p_funcs = p_funcs; - - /*panel reset*/ - ret = mdfld_dbi_panel_reset(dbi_output); - if (ret) { - dev_err(dev->dev, "reset panel error\n"); - goto out_err1; - } - - /*TODO: get panel info from DDB*/ - - /*get fixed mode*/ - dsi_config = mdfld_dsi_get_config(dsi_connector); fixed_mode = dsi_config->fixed_mode; - dbi_output->panel_fixed_mode = fixed_mode; - /*create drm encoder object*/ + /* Create drm encoder object */ connector = &dsi_connector->base.base; encoder = &dbi_output->base.base; drm_encoder_init(dev, @@ -827,10 +723,10 @@ struct mdfld_dsi_encoder *mdfld_dsi_dbi_init(struct drm_device *dev, DRM_MODE_ENCODER_MIPI); drm_encoder_helper_add(encoder, p_funcs->encoder_helper_funcs); - /*attach to given connector*/ + /* Attach to given connector */ drm_mode_connector_attach_encoder(connector, encoder); - /*set possible crtcs and clones*/ + /* Set possible CRTCs and clones */ if (dsi_connector->pipe) { encoder->possible_crtcs = (1 << 2); encoder->possible_clones = (1 << 1); @@ -842,28 +738,31 @@ struct mdfld_dsi_encoder *mdfld_dsi_dbi_init(struct drm_device *dev, dev_priv->dsr_fb_update = 0; dev_priv->dsr_enable = false; dev_priv->exit_idle = mdfld_dsi_dbi_exit_dsr; -#if defined(CONFIG_MDFLD_DSI_DPU) || defined(CONFIG_MDFLD_DSI_DSR) - dev_priv->dsr_enable_config = false; -#endif /*CONFIG_MDFLD_DSI_DSR*/ dbi_output->first_boot = true; dbi_output->mode_flags = MODE_SETTING_IN_ENCODER; #ifdef CONFIG_MDFLD_DSI_DPU - /*add this output to dpu_info*/ - if (dsi_connector->pipe == 0) - dpu_info->dbi_outputs[0] = dbi_output; - } else { - dpu_info->dbi_outputs[1] = dbi_output; + /* Add this output to dpu_info */ + if (dsi_connector->status == connector_status_connected) { + if (dsi_connector->pipe == 0) + dpu_info->dbi_outputs[0] = dbi_output; + else + dpu_info->dbi_outputs[1] = dbi_output; + + dpu_info->dbi_output_num++; } - dpu_info->dbi_output_num++; + #else /*CONFIG_MDFLD_DSI_DPU*/ - /*add this output to dsr_info*/ - if (dsi_connector->pipe == 0) - dsr_info->dbi_outputs[0] = dbi_output; - else - dsr_info->dbi_outputs[1] = dbi_output; - dsr_info->dbi_output_num++; + if (dsi_connector->status == connector_status_connected) { + /* Add this output to dsr_info */ + if (dsi_connector->pipe == 0) + dsr_info->dbi_outputs[0] = dbi_output; + else + dsr_info->dbi_outputs[1] = dbi_output; + + dsr_info->dbi_output_num++; + } #endif return &dbi_output->base; out_err1: diff --git a/drivers/staging/gma500/mdfld_dsi_dbi.h b/drivers/staging/gma500/mdfld_dsi_dbi.h index a51e2f875186..a2ec6fd94aed 100644 --- a/drivers/staging/gma500/mdfld_dsi_dbi.h +++ b/drivers/staging/gma500/mdfld_dsi_dbi.h @@ -59,9 +59,6 @@ struct mdfld_dsi_dbi_output { /* Backlight operations */ /* DSR timer */ - spinlock_t dsr_timer_lock; - struct timer_list dsr_timer; - void(*dsi_timer_func)(unsigned long data); u32 dsr_idle_count; bool dsr_fb_update_done; @@ -81,22 +78,11 @@ struct mdfld_dbi_dsr_info { int dbi_output_num; struct mdfld_dsi_dbi_output *dbi_outputs[2]; - spinlock_t dsr_timer_lock; - struct timer_list dsr_timer; u32 dsr_idle_count; }; #define DBI_CB_TIMEOUT_COUNT 0xffff -/* DCS commands */ -#define enter_sleep_mode 0x10 -#define exit_sleep_mode 0x11 -#define set_display_off 0x28 -#define set_dispaly_on 0x29 -#define set_column_address 0x2a -#define set_page_addr 0x2b -#define write_mem_start 0x2c - /* Offsets */ #define CMD_MEM_ADDR_OFFSET 0 @@ -132,7 +118,7 @@ static inline int mdfld_dsi_dbi_cmd_sent(struct mdfld_dsi_dbi_output *dbi_output /* Query the command execution status */ while (retry--) - if (!(REG_READ(MIPIA_CMD_ADD_REG + reg_offset) & (1 << 10))) + if (!(REG_READ(MIPIA_CMD_ADD_REG + reg_offset) & (1 << 0))) break; if (!retry) { @@ -164,13 +150,11 @@ static inline int mdfld_dsi_dbi_cb_ready(struct mdfld_dsi_dbi_output *dbi_output extern void mdfld_dsi_dbi_output_init(struct drm_device *dev, struct psb_intel_mode_device *mode_dev, int pipe); -extern void mdfld_dsi_dbi_exit_dsr(struct drm_device *dev, u32 update_src, - void *p_surfaceAddr, bool check_hw_on_only); +extern void mdfld_dsi_dbi_exit_dsr(struct drm_device *dev, u32 update_src); extern void mdfld_dsi_dbi_enter_dsr(struct mdfld_dsi_dbi_output *dbi_output, int pipe); extern int mdfld_dbi_dsr_init(struct drm_device *dev); extern void mdfld_dbi_dsr_exit(struct drm_device *dev); -extern void mdfld_dbi_dsr_timer_start(struct mdfld_dbi_dsr_info *dsr_info); extern struct mdfld_dsi_encoder *mdfld_dsi_dbi_init(struct drm_device *dev, struct mdfld_dsi_connector *dsi_connector, struct panel_funcs *p_funcs); @@ -178,7 +162,6 @@ extern int mdfld_dsi_dbi_send_dcs(struct mdfld_dsi_dbi_output *dbi_output, u8 dcs, u8 *param, u32 num, u8 data_src); extern int mdfld_dsi_dbi_update_area(struct mdfld_dsi_dbi_output *dbi_output, u16 x1, u16 y1, u16 x2, u16 y2); -extern void mdfld_dbi_dsr_timer_start(struct mdfld_dbi_dsr_info *dsr_info); extern int mdfld_dsi_dbi_update_power(struct mdfld_dsi_dbi_output *dbi_output, int mode); extern void mdfld_dsi_controller_dbi_init(struct mdfld_dsi_config *dsi_config, diff --git a/drivers/staging/gma500/mdfld_dsi_dbi_dpu.h b/drivers/staging/gma500/mdfld_dsi_dbi_dpu.h index 4ca9682c47c5..42367ed48c08 100644 --- a/drivers/staging/gma500/mdfld_dsi_dbi_dpu.h +++ b/drivers/staging/gma500/mdfld_dsi_dbi_dpu.h @@ -90,9 +90,6 @@ static inline int mdfld_dpu_region_extent(struct psb_drm_dpu_rect *origin, { int x1, y1, x2, y2; - /* PSB_DEBUG_ENTRY("rect (%d, %d, %d, %d)\n", - rect->x, rect->y, rect->width, rect->height); */ - x1 = origin->x + origin->width; y1 = origin->y + origin->height; diff --git a/drivers/staging/gma500/mdfld_dsi_dpi.c b/drivers/staging/gma500/mdfld_dsi_dpi.c index fce3c2031347..6e03a91e947e 100644 --- a/drivers/staging/gma500/mdfld_dsi_dpi.c +++ b/drivers/staging/gma500/mdfld_dsi_dpi.c @@ -69,26 +69,6 @@ static void mdfld_wait_for_HS_CTRL_FIFO(struct drm_device *dev, u32 pipe) dev_warn(dev->dev, "MIPI: HS CMD FIFO was never cleared!\n"); } -static void mdfld_wait_for_PIPEA_DISABLE(struct drm_device *dev, u32 pipe) -{ - u32 pipeconf_reg = PIPEACONF; - int timeout = 0; - - if (pipe == 2) - pipeconf_reg = PIPECCONF; - - udelay(500); - - /* This will time out after approximately 2+ seconds */ - while ((timeout < 20000) && (REG_READ(pipeconf_reg) & 0x40000000)) { - udelay(100); - timeout++; - } - - if (timeout == 20000) - dev_warn(dev->dev, "MIPI: PIPE was not disabled!\n"); -} - static void mdfld_wait_for_DPI_CTRL_FIFO(struct drm_device *dev, u32 pipe) { u32 gen_fifo_stat_reg = MIPIA_GEN_FIFO_STAT_REG; @@ -147,8 +127,6 @@ void mdfld_dsi_tpo_ic_init(struct mdfld_dsi_config *dsi_config, u32 pipe) u32 gen_ctrl_reg = MIPIA_HS_GEN_CTRL_REG; u32 gen_ctrl_val = GEN_LONG_WRITE; - dev_warn(dev->dev, "Enter mrst init TPO MIPI display.\n"); - if (pipe == 2) { gen_data_reg = HS_GEN_DATA_REG + MIPIC_REG_OFFSET; gen_ctrl_reg = HS_GEN_CTRL_REG + MIPIC_REG_OFFSET; @@ -331,51 +309,8 @@ void mdfld_dsi_tpo_ic_init(struct mdfld_dsi_config *dsi_config, u32 pipe) REG_WRITE(gen_ctrl_reg, gen_ctrl_val | (0x03 << WORD_COUNTS_POS)); } -/* ************************************************************************* *\ - * FUNCTION: mdfld_init_TMD_MIPI - * - * DESCRIPTION: This function is called only by mrst_dsi_mode_set and - * restore_display_registers. since this function does not - * acquire the mutex, it is important that the calling function - * does! -\* ************************************************************************* */ - -static u32 tmd_cmd_mcap_off[] = {0x000000b2}; -static u32 tmd_cmd_enable_lane_switch[] = {0x000101ef}; -static u32 tmd_cmd_set_lane_num[] = {0x006360ef}; -static u32 tmd_cmd_set_mode[] = {0x000000b3}; -static u32 tmd_cmd_set_sync_pulse_mode[] = {0x000961ef}; -static u32 tmd_cmd_set_video_mode[] = {0x00000153}; -static u32 tmd_cmd_enable_backlight[] = {0x00005ab4};//no auto_bl,need add in furtrue -static u32 tmd_cmd_set_backlight_dimming[] = {0x00000ebd}; - -void mdfld_dsi_tmd_drv_ic_init(struct mdfld_dsi_config *dsi_config, u32 pipe) -{ - struct mdfld_dsi_pkg_sender *sender = mdfld_dsi_get_pkg_sender(dsi_config); - - if(!sender) { - WARN_ON(1); - return; - } - - if(dsi_config->dvr_ic_inited) - return; - - msleep(3); - - mdfld_dsi_send_gen_long_lp(sender, tmd_cmd_mcap_off, 1, 0); - mdfld_dsi_send_gen_long_lp(sender, tmd_cmd_enable_lane_switch, 1, 0); - mdfld_dsi_send_gen_long_lp(sender, tmd_cmd_set_lane_num, 1, 0); - mdfld_dsi_send_gen_long_lp(sender, tmd_cmd_set_mode, 1, 0); - mdfld_dsi_send_gen_long_lp(sender, tmd_cmd_set_sync_pulse_mode, 1, 0); - /*TODO: set page and column here*/ - mdfld_dsi_send_gen_long_lp(sender, tmd_cmd_set_video_mode, 1, 0); - mdfld_dsi_send_gen_long_lp(sender, tmd_cmd_enable_backlight, 1, 0); - mdfld_dsi_send_gen_long_lp(sender, tmd_cmd_set_backlight_dimming,1,0); - dsi_config->dvr_ic_inited = 1; -} - -static u16 mdfld_dsi_dpi_to_byte_clock_count(int pixel_clock_count, int num_lane, int bpp) +static u16 mdfld_dsi_dpi_to_byte_clock_count(int pixel_clock_count, + int num_lane, int bpp) { return (u16)((pixel_clock_count * bpp) / (num_lane * 8)); } @@ -387,8 +322,8 @@ static u16 mdfld_dsi_dpi_to_byte_clock_count(int pixel_clock_count, int num_lane * use crtc mode values later */ int mdfld_dsi_dpi_timing_calculation(struct drm_display_mode *mode, - struct mdfld_dsi_dpi_timing *dpi_timing, - int num_lane, int bpp) + struct mdfld_dsi_dpi_timing *dpi_timing, + int num_lane, int bpp) { int pclk_hsync, pclk_hfp, pclk_hbp, pclk_hactive; int pclk_vsync, pclk_vfp, pclk_vbp, pclk_vactive; @@ -408,16 +343,6 @@ int mdfld_dsi_dpi_timing_calculation(struct drm_display_mode *mode, pclk_vsync = mode->vsync_end - mode->vsync_start; pclk_vbp = mode->vtotal - mode->vsync_end; -#ifdef MIPI_DEBUG_LOG - printk(KERN_ALERT "[DISPLAY] %s: pclk_hactive = %d\n", __func__, pclk_hactive); - printk(KERN_ALERT "[DISPLAY] %s: pclk_hfp = %d\n", __func__, pclk_hfp); - printk(KERN_ALERT "[DISPLAY] %s: pclk_hsync = %d\n", __func__, pclk_hsync); - printk(KERN_ALERT "[DISPLAY] %s: pclk_hbp = %d\n", __func__, pclk_hbp); - printk(KERN_ALERT "[DISPLAY] %s: pclk_vactive = %d\n", __func__, pclk_vactive); - printk(KERN_ALERT "[DISPLAY] %s: pclk_vfp = %d\n", __func__, pclk_vfp); - printk(KERN_ALERT "[DISPLAY] %s: pclk_vsync = %d\n", __func__, pclk_vsync); - printk(KERN_ALERT "[DISPLAY] %s: pclk_vbp = %d\n", __func__, pclk_vbp); -#endif /* * byte clock counts were calculated by following formula * bclock_count = pclk_count * bpp / num_lane / 8 @@ -519,7 +444,6 @@ void mdfld_dsi_dpi_controller_init(struct mdfld_dsi_config *dsi_config, int pipe void mdfld_dsi_dpi_turn_on(struct mdfld_dsi_dpi_output *output, int pipe) { struct drm_device *dev = output->dev; - /* struct drm_psb_private *dev_priv = dev->dev_private; */ u32 reg_offset = 0; if(output->panel_on) @@ -555,7 +479,6 @@ void mdfld_dsi_dpi_turn_on(struct mdfld_dsi_dpi_output *output, int pipe) static void mdfld_dsi_dpi_shut_down(struct mdfld_dsi_dpi_output *output, int pipe) { struct drm_device *dev = output->dev; - /* struct drm_psb_private *dev_priv = dev->dev_private; */ u32 reg_offset = 0; /*if output is on, or mode setting didn't happen, ignore this*/ @@ -576,6 +499,7 @@ static void mdfld_dsi_dpi_shut_down(struct mdfld_dsi_dpi_output *output, int pip } if(REG_READ(MIPIA_DPI_CONTROL_REG + reg_offset) == DSI_DPI_CTRL_HS_SHUTDOWN) { + dev_warn(dev->dev, "try to send the same package again, abort!"); goto shutdown_out; } @@ -590,6 +514,14 @@ shutdown_out: /* dev_priv->dpi_panel_on2 = false; */ /* else if (pipe == 0) */ /* dev_priv->dpi_panel_on = false; */ + /* #ifdef CONFIG_PM_RUNTIME*/ + /* if (drm_psb_ospm && !enable_gfx_rtpm) { */ + /* pm_runtime_allow(&gpDrmDevice->pdev->dev); */ + /* schedule_delayed_work(&dev_priv->rtpm_work, 30 * 1000); */ + /* } */ + /*if (enable_gfx_rtpm) */ + /* pm_schedule_suspend(&dev->pdev->dev, gfxrtdelay); */ + /* #endif */ } void mdfld_dsi_dpi_set_power(struct drm_encoder *encoder, bool on) @@ -616,7 +548,7 @@ void mdfld_dsi_dpi_set_power(struct drm_encoder *encoder, bool on) if (mdfld_get_panel_type(dev, pipe) == TMD_VID){ mdfld_dsi_dpi_turn_on(dpi_output, pipe); } else { - /*enable mipi port*/ + /* Enable mipi port */ REG_WRITE(mipi_reg, (REG_READ(mipi_reg) | (1 << 31))); REG_READ(mipi_reg); @@ -636,7 +568,7 @@ void mdfld_dsi_dpi_set_power(struct drm_encoder *encoder, bool on) mdfld_dsi_dpi_shut_down(dpi_output, pipe); } else { mdfld_dsi_dpi_shut_down(dpi_output, pipe); - /*disable mipi port*/ + /* Disable mipi port */ REG_WRITE(mipi_reg, (REG_READ(mipi_reg) & ~(1<<31))); REG_READ(mipi_reg); } @@ -656,8 +588,15 @@ void mdfld_dsi_dpi_dpms(struct drm_encoder *encoder, int mode) if (mode == DRM_MODE_DPMS_ON) mdfld_dsi_dpi_set_power(encoder, true); - else + else { mdfld_dsi_dpi_set_power(encoder, false); +#if 0 /* FIXME */ +#ifdef CONFIG_PM_RUNTIME + if (enable_gfx_rtpm) + pm_schedule_suspend(&gpDrmDevice->pdev->dev, gfxrtdelay); +#endif +#endif + } } bool mdfld_dsi_dpi_mode_fixup(struct drm_encoder *encoder, @@ -694,77 +633,6 @@ void mdfld_dsi_dpi_commit(struct drm_encoder *encoder) mdfld_dsi_dpi_set_power(encoder, true); } -void dsi_debug_MIPI_reg(struct drm_device *dev) -{ - u32 temp_val = 0; - - temp_val = REG_READ(MIPI); - printk(KERN_ALERT "[DISPLAY] MIPI = %x\n", temp_val); - - /* set the lane speed */ - temp_val = REG_READ(MIPI_CONTROL_REG); - printk(KERN_ALERT "[DISPLAY] MIPI_CONTROL_REG = %x\n", temp_val); - - /* Enable all the error interrupt */ - temp_val = REG_READ(INTR_EN_REG); - printk(KERN_ALERT "[DISPLAY] INTR_EN_REG = %x\n", temp_val); - temp_val = REG_READ(TURN_AROUND_TIMEOUT_REG); - printk(KERN_ALERT "[DISPLAY] TURN_AROUND_TIMEOUT_REG = %x\n", temp_val); - temp_val = REG_READ(DEVICE_RESET_REG); - printk(KERN_ALERT "[DISPLAY] DEVICE_RESET_REG = %x\n", temp_val); - temp_val = REG_READ(INIT_COUNT_REG); - printk(KERN_ALERT "[DISPLAY] INIT_COUNT_REG = %x\n", temp_val); - - temp_val = REG_READ(DSI_FUNC_PRG_REG); - printk(KERN_ALERT "[DISPLAY] DSI_FUNC_PRG_REG = %x\n", temp_val); - - temp_val = REG_READ(DPI_RESOLUTION_REG); - printk(KERN_ALERT "[DISPLAY] DPI_RESOLUTION_REG = %x\n", temp_val); - - temp_val = REG_READ(VERT_SYNC_PAD_COUNT_REG); - printk(KERN_ALERT "[DISPLAY] VERT_SYNC_PAD_COUNT_REG = %x\n", temp_val); - temp_val = REG_READ(VERT_BACK_PORCH_COUNT_REG); - printk(KERN_ALERT "[DISPLAY] VERT_BACK_PORCH_COUNT_REG = %x\n", temp_val); - temp_val = REG_READ(VERT_FRONT_PORCH_COUNT_REG); - printk(KERN_ALERT "[DISPLAY] VERT_FRONT_PORCH_COUNT_REG = %x\n", temp_val); - - temp_val = REG_READ(HORIZ_SYNC_PAD_COUNT_REG); - printk(KERN_ALERT "[DISPLAY] HORIZ_SYNC_PAD_COUNT_REG = %x\n", temp_val); - temp_val = REG_READ(HORIZ_BACK_PORCH_COUNT_REG); - printk(KERN_ALERT "[DISPLAY] HORIZ_BACK_PORCH_COUNT_REG = %x\n", temp_val); - temp_val = REG_READ(HORIZ_FRONT_PORCH_COUNT_REG); - printk(KERN_ALERT "[DISPLAY] HORIZ_FRONT_PORCH_COUNT_REG = %x\n", temp_val); - temp_val = REG_READ(HORIZ_ACTIVE_AREA_COUNT_REG); - printk(KERN_ALERT "[DISPLAY] HORIZ_ACTIVE_AREA_COUNT_REG = %x\n", temp_val); - - temp_val = REG_READ(VIDEO_FMT_REG); - printk(KERN_ALERT "[DISPLAY] VIDEO_FMT_REG = %x\n", temp_val); - - temp_val = REG_READ(HS_TX_TIMEOUT_REG); - printk(KERN_ALERT "[DISPLAY] HS_TX_TIMEOUT_REG = %x\n", temp_val); - temp_val = REG_READ(LP_RX_TIMEOUT_REG); - printk(KERN_ALERT "[DISPLAY] LP_RX_TIMEOUT_REG = %x\n", temp_val); - - temp_val = REG_READ(HIGH_LOW_SWITCH_COUNT_REG); - printk(KERN_ALERT "[DISPLAY] HIGH_LOW_SWITCH_COUNT_REG = %x\n", temp_val); - - temp_val = REG_READ(EOT_DISABLE_REG); - printk(KERN_ALERT "[DISPLAY] EOT_DISABLE_REG = %x\n", temp_val); - - temp_val = REG_READ(LP_BYTECLK_REG); - printk(KERN_ALERT "[DISPLAY] LP_BYTECLK_REG = %x\n", temp_val); - temp_val = REG_READ(MAX_RET_PAK_REG); - printk(KERN_ALERT "[DISPLAY] MAX_RET_PAK_REG = %x\n", temp_val); - temp_val = REG_READ(DPI_CONTROL_REG); - printk(KERN_ALERT "[DISPLAY] DPI_CONTROL_REG = %x\n", temp_val); - temp_val = REG_READ(DPHY_PARAM_REG); - printk(KERN_ALERT "[DISPLAY] DPHY_PARAM_REG = %x\n", temp_val); -// temp_val = REG_READ(PIPEACONF); -// printk(KERN_INFO "[DISPLAY] PIPEACONF = %x\n", temp_val); -// temp_val = REG_READ(DSPACNTR); -// printk(KERN_INFO "[DISPLAY] DSPACNTR = %x\n", temp_val); -} - void mdfld_dsi_dpi_mode_set(struct drm_encoder *encoder, struct drm_display_mode *mode, struct drm_display_mode *adjusted_mode) @@ -804,14 +672,11 @@ void mdfld_dsi_dpi_mode_set(struct drm_encoder *encoder, REG_WRITE(mipi_reg, mipi); REG_READ(mipi_reg); - /* Set up DSI controller DPI interface*/ + /* Set up DSI controller DPI interface */ mdfld_dsi_dpi_controller_init(dsi_config, pipe); - if (mdfld_get_panel_type(dev, pipe) == TMD_VID) { - /* init driver ic */ - mdfld_dsi_tmd_drv_ic_init(dsi_config, pipe); - } else { - /*turn on DPI interface*/ + if (mdfld_get_panel_type(dev, pipe) != TMD_VID) { + /* Turn on DPI interface */ mdfld_dsi_dpi_turn_on(dpi_output, pipe); } @@ -829,81 +694,15 @@ void mdfld_dsi_dpi_mode_set(struct drm_encoder *encoder, REG_READ(MIPIA_INTR_STAT_REG + reg_offset), dpi_output->panel_on); - if (mdfld_get_panel_type(dev, pipe) == TMD_VID) { - //mdfld_dsi_dpi_turn_on(dpi_output, pipe); - } else { - /* init driver ic */ + if (mdfld_get_panel_type(dev, pipe) != TMD_VID) { + /* Init driver ic */ mdfld_dsi_tpo_ic_init(dsi_config, pipe); - /*init backlight*/ + /* Init backlight */ mdfld_dsi_brightness_init(dsi_config, pipe); } - -#ifdef MIPI_DEBUG_LOG - dsi_debug_MIPI_reg(dev); -#endif gma_power_end(dev); } -static int mdfld_dpi_panel_reset(int pipe) -{ - unsigned gpio; - int ret = 0; - - switch(pipe) { - case 0: - gpio = 128; - break; - case 2: - gpio = 34; - break; - default: - DRM_ERROR("Invalid output\n"); - return -EINVAL; - } - - ret = gpio_request(gpio, "gfx"); - if(ret) { - DRM_ERROR("gpio_rqueset failed\n"); - return ret; - } - ret = gpio_direction_output(gpio, 1); - if(ret) { - DRM_ERROR("gpio_direction_output failed\n"); - goto gpio_error; - } - - gpio_get_value(128); - -gpio_error: - if(gpio_is_valid(gpio)) - gpio_free(gpio); - return ret; -} - -/** - * Exit from DSR - */ -void mdfld_dsi_dpi_exit_idle (struct drm_device *dev, u32 update_src, void *p_surfaceAddr, bool check_hw_on_only) -{ - struct drm_psb_private *dev_priv = dev->dev_private; - - if (!gma_power_begin(dev, true)) { - DRM_ERROR("hw begin failed\n"); - return; - } - - /* update the surface base address. */ - if (p_surfaceAddr) { - REG_WRITE(DSPASURF, *((u32 *)p_surfaceAddr)); -#if defined(CONFIG_MDFD_DUAL_MIPI) - REG_WRITE(DSPCSURF, *((u32 *)p_surfaceAddr)); -#endif - } - mid_enable_pipe_event(dev_priv, 0); - psb_enable_pipestat(dev_priv, 0, PIPE_VBLANK_INTERRUPT_ENABLE); - dev_priv->is_in_idle = false; - dev_priv->dsr_idle_count = 0; -} /* * Init DSI DPI encoder. @@ -912,40 +711,63 @@ void mdfld_dsi_dpi_exit_idle (struct drm_device *dev, u32 update_src, void *p_su */ struct mdfld_dsi_encoder *mdfld_dsi_dpi_init(struct drm_device *dev, struct mdfld_dsi_connector *dsi_connector, - struct panel_funcs*p_funcs) + struct panel_funcs *p_funcs) { - struct drm_psb_private *dev_priv = dev->dev_private; struct mdfld_dsi_dpi_output *dpi_output = NULL; struct mdfld_dsi_config *dsi_config; struct drm_connector *connector = NULL; struct drm_encoder *encoder = NULL; struct drm_display_mode *fixed_mode = NULL; + int pipe; + u32 data; int ret; - if (!dsi_connector) { + if (!dsi_connector || !p_funcs) { WARN_ON(1); return NULL; } + dsi_config = mdfld_dsi_get_config(dsi_connector); + pipe = dsi_connector->pipe; + + /* Panel hard-reset */ + if (p_funcs->reset) { + ret = p_funcs->reset(pipe); + if (ret) { + DRM_ERROR("Panel %d hard-reset failed\n", pipe); + return NULL; + } + } + + /* Panel drvIC init */ + if (p_funcs->drv_ic_init) + p_funcs->drv_ic_init(dsi_config, pipe); + + /* Panel power mode detect */ + ret = mdfld_dsi_get_power_mode(dsi_config, + &data, + MDFLD_DSI_LP_TRANSMISSION); + if (ret) { + DRM_ERROR("Panel %d get power mode failed\n", pipe); + dsi_connector->status = connector_status_disconnected; + } else { + DRM_INFO("pipe %d power mode 0x%x\n", pipe, data); + dsi_connector->status = connector_status_connected; + } + dpi_output = kzalloc(sizeof(struct mdfld_dsi_dpi_output), GFP_KERNEL); if(!dpi_output) { dev_err(dev->dev, "No memory for dsi_dpi_output\n"); return NULL; } - /* Panel reset */ - ret = mdfld_dpi_panel_reset(dsi_connector->pipe); - if(ret) { - DRM_ERROR("reset panel error\n"); - goto out_err1; - } - + if(dsi_connector->pipe) dpi_output->panel_on = 0; - + else dpi_output->panel_on = 0; - dpi_output->dev = dev; + dpi_output->p_funcs = p_funcs; dpi_output->first_boot = 1; /* Get fixed mode */ @@ -973,19 +795,6 @@ struct mdfld_dsi_encoder *mdfld_dsi_dpi_init(struct drm_device *dev, encoder->possible_crtcs = (1 << 0); encoder->possible_clones = (1 << 0); } - - dev_priv->dsr_fb_update = 0; - dev_priv->dsr_enable = false; - dev_priv->exit_idle = mdfld_dsi_dpi_exit_idle; -#if defined(CONFIG_MDFLD_DSI_DPU) || defined(CONFIG_MDFLD_DSI_DSR) - dev_priv->dsr_enable_config = true; -#endif /*CONFIG_MDFLD_DSI_DSR*/ - return &dpi_output->base; - -out_err1: - if(dpi_output) - kfree(dpi_output); - return NULL; } diff --git a/drivers/staging/gma500/mdfld_dsi_dpi.h b/drivers/staging/gma500/mdfld_dsi_dpi.h index 68e65cce2a76..ed92d45ee74a 100644 --- a/drivers/staging/gma500/mdfld_dsi_dpi.h +++ b/drivers/staging/gma500/mdfld_dsi_dpi.h @@ -47,6 +47,8 @@ struct mdfld_dsi_dpi_output { int panel_on; int first_boot; + + struct panel_funcs *p_funcs; }; #define MDFLD_DSI_DPI_OUTPUT(dsi_encoder) \ @@ -73,8 +75,4 @@ extern void mdfld_dsi_dpi_turn_on(struct mdfld_dsi_dpi_output *output, int pipe); extern void mdfld_dsi_dpi_controller_init(struct mdfld_dsi_config *si_config, int pipe); -extern void mid_enable_pipe_event(struct drm_psb_private *dev_priv, int pipe); -extern void psb_enable_pipestat(struct drm_psb_private *dev_priv, int pipe, - u32 mask); - #endif /*__MDFLD_DSI_DPI_H__*/ diff --git a/drivers/staging/gma500/mdfld_dsi_output.c b/drivers/staging/gma500/mdfld_dsi_output.c index ff75ece9dcf8..3286c3da4d70 100644 --- a/drivers/staging/gma500/mdfld_dsi_output.c +++ b/drivers/staging/gma500/mdfld_dsi_output.c @@ -35,55 +35,18 @@ #define MDFLD_DSI_BRIGHTNESS_MAX_LEVEL 100 -/* get the CABC LABC from command line. */ static int CABC_control = 1; static int LABC_control = 1; -#ifdef MODULE module_param (CABC_control, int, 0644); module_param (LABC_control, int, 0644); -#else -static int __init parse_CABC_control(char *arg) -{ - /* CABC control can be passed in as a cmdline parameter */ - /* to enable this feature add CABC=1 to cmdline */ - /* to disable this feature add CABC=0 to cmdline */ - if (!arg) - return -EINVAL; - - if (!strcasecmp(arg, "0")) - CABC_control = 0; - else if (!strcasecmp (arg, "1")) - CABC_control = 1; - - return 0; -} -early_param ("CABC", parse_CABC_control); - -static int __init parse_LABC_control(char *arg) -{ - /* LABC control can be passed in as a cmdline parameter */ - /* to enable this feature add LABC=1 to cmdline */ - /* to disable this feature add LABC=0 to cmdline */ - if (!arg) - return -EINVAL; - - if (!strcasecmp(arg, "0")) - LABC_control = 0; - else if (!strcasecmp (arg, "1")) - LABC_control = 1; - - return 0; -} -early_param ("LABC", parse_LABC_control); -#endif /** * make these MCS command global * we don't need 'movl' everytime we send them. * FIXME: these datas were provided by OEM, we should get them from GCT. **/ -static u32 mdfld_dbi_mcs_hysteresis[] = { +static const u32 mdfld_dbi_mcs_hysteresis[] = { 0x42000f57, 0x8c006400, 0xff00bf00, 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, 0x38000aff, 0x82005000, 0xff00ab00, 0xffffffff, @@ -91,25 +54,26 @@ static u32 mdfld_dbi_mcs_hysteresis[] = { 0x000000ff, }; -static u32 mdfld_dbi_mcs_display_profile[] = { +static const u32 mdfld_dbi_mcs_display_profile[] = { 0x50281450, 0x0000c882, 0x00000000, 0x00000000, 0x00000000, }; -static u32 mdfld_dbi_mcs_kbbc_profile[] = { +static const u32 mdfld_dbi_mcs_kbbc_profile[] = { 0x00ffcc60, 0x00000000, 0x00000000, 0x00000000, }; -static u32 mdfld_dbi_mcs_gamma_profile[] = { +static const u32 mdfld_dbi_mcs_gamma_profile[] = { 0x81111158, 0x88888888, 0x88888888, }; /* * write hysteresis values. */ -static void mdfld_dsi_write_hysteresis (struct mdfld_dsi_config * dsi_config, int pipe) +static void mdfld_dsi_write_hysteresis (struct mdfld_dsi_config *dsi_config, + int pipe) { - struct mdfld_dsi_pkg_sender * sender = mdfld_dsi_get_pkg_sender(dsi_config); + struct mdfld_dsi_pkg_sender *sender = mdfld_dsi_get_pkg_sender(dsi_config); if(!sender) { WARN_ON(1); @@ -124,9 +88,9 @@ static void mdfld_dsi_write_hysteresis (struct mdfld_dsi_config * dsi_config, in /* * write display profile values. */ -static void mdfld_dsi_write_display_profile (struct mdfld_dsi_config * dsi_config, int pipe) +static void mdfld_dsi_write_display_profile(struct mdfld_dsi_config *dsi_config, int pipe) { - struct mdfld_dsi_pkg_sender * sender = mdfld_dsi_get_pkg_sender(dsi_config); + struct mdfld_dsi_pkg_sender *sender = mdfld_dsi_get_pkg_sender(dsi_config); if(!sender) { WARN_ON(1); @@ -143,7 +107,7 @@ static void mdfld_dsi_write_display_profile (struct mdfld_dsi_config * dsi_confi */ static void mdfld_dsi_write_kbbc_profile (struct mdfld_dsi_config * dsi_config, int pipe) { - struct mdfld_dsi_pkg_sender * sender = mdfld_dsi_get_pkg_sender(dsi_config); + struct mdfld_dsi_pkg_sender *sender = mdfld_dsi_get_pkg_sender(dsi_config); if(!sender) { WARN_ON(1); @@ -155,12 +119,12 @@ static void mdfld_dsi_write_kbbc_profile (struct mdfld_dsi_config * dsi_config, MDFLD_DSI_SEND_PACKAGE); } -/** +/* * write gamma setting. */ -static void mdfld_dsi_write_gamma_setting (struct mdfld_dsi_config * dsi_config, int pipe) +static void mdfld_dsi_write_gamma_setting (struct mdfld_dsi_config *dsi_config, int pipe) { - struct mdfld_dsi_pkg_sender * sender = mdfld_dsi_get_pkg_sender(dsi_config); + struct mdfld_dsi_pkg_sender *sender = mdfld_dsi_get_pkg_sender(dsi_config); if(!sender) { WARN_ON(1); @@ -172,7 +136,7 @@ static void mdfld_dsi_write_gamma_setting (struct mdfld_dsi_config * dsi_config, MDFLD_DSI_SEND_PACKAGE); } -/** +/* * Check and see if the generic control or data buffer is empty and ready. */ void mdfld_dsi_gen_fifo_ready (struct drm_device *dev, u32 gen_fifo_stat_reg, u32 fifo_stat) @@ -193,16 +157,16 @@ void mdfld_dsi_gen_fifo_ready (struct drm_device *dev, u32 gen_fifo_stat_reg, u3 gen_fifo_stat_reg); } -/** +/* * Manage the DSI MIPI keyboard and display brightness. * FIXME: this is exported to OSPM code. should work out an specific * display interface to OSPM. */ -void mdfld_dsi_brightness_init (struct mdfld_dsi_config * dsi_config, int pipe) +void mdfld_dsi_brightness_init(struct mdfld_dsi_config *dsi_config, int pipe) { - struct mdfld_dsi_pkg_sender * sender = mdfld_dsi_get_pkg_sender(dsi_config); - struct drm_device * dev = sender->dev; - struct drm_psb_private * dev_priv = dev->dev_private; + struct mdfld_dsi_pkg_sender *sender = mdfld_dsi_get_pkg_sender(dsi_config); + struct drm_device *dev = sender->dev; + struct drm_psb_private *dev_priv = dev->dev_private; u32 gen_ctrl_val; if(!sender) { @@ -223,7 +187,7 @@ void mdfld_dsi_brightness_init (struct mdfld_dsi_config * dsi_config, int pipe) 1, MDFLD_DSI_SEND_PACKAGE); - mdfld_dsi_write_hysteresis (dsi_config, pipe); + mdfld_dsi_write_hysteresis(dsi_config, pipe); mdfld_dsi_write_display_profile (dsi_config, pipe); mdfld_dsi_write_kbbc_profile (dsi_config, pipe); mdfld_dsi_write_gamma_setting (dsi_config, pipe); @@ -253,7 +217,7 @@ void mdfld_dsi_brightness_init (struct mdfld_dsi_config * dsi_config, int pipe) MDFLD_DSI_SEND_PACKAGE); } -/** +/* * Manage the mipi display brightness. * TODO: refine this interface later */ @@ -262,8 +226,8 @@ void mdfld_dsi_brightness_control(struct drm_device *dev, int pipe, int level) struct mdfld_dsi_pkg_sender *sender; struct drm_psb_private *dev_priv; struct mdfld_dsi_config *dsi_config; - u32 gen_ctrl_val = 0; - int p_type = TMD_VID; + u32 gen_ctrl_val; + int p_type; if (!dev || (pipe != 0 && pipe != 2)) { dev_err(dev->dev, "Invalid parameter\n"); @@ -288,7 +252,8 @@ void mdfld_dsi_brightness_control(struct drm_device *dev, int pipe, int level) gen_ctrl_val = ((level * 0xff) / MDFLD_DSI_BRIGHTNESS_MAX_LEVEL) & 0xff; - dev_dbg(dev->dev, "pipe = %d, gen_ctrl_val = %d. \n", pipe, gen_ctrl_val); + dev_dbg(dev->dev, + "pipe = %d, gen_ctrl_val = %d. \n", pipe, gen_ctrl_val); if(p_type == TMD_VID || p_type == TMD_CMD){ /* Set display backlight value */ @@ -344,7 +309,7 @@ void mdfld_dsi_controller_shutdown(struct mdfld_dsi_config * dsi_config, int pip if(!(REG_READ(MIPIA_DEVICE_READY_REG + reg_offset) & DSI_DEVICE_READY)) goto shutdown_out; - /*send shut down package, clean packet send bit first*/ + /* Send shut down package, clean packet send bit first */ if(REG_READ(MIPIA_INTR_STAT_REG + reg_offset) & DSI_INTR_STATE_SPL_PKG_SENT) { REG_WRITE((MIPIA_INTR_STAT_REG + reg_offset), (REG_READ(MIPIA_INTR_STAT_REG + reg_offset) | DSI_INTR_STATE_SPL_PKG_SENT)); @@ -432,6 +397,53 @@ startup_out: gma_power_end(dev); } + +static int mdfld_dsi_get_panel_status(struct mdfld_dsi_config *dsi_config, + u8 dcs, + u32 *data, + u8 transmission) +{ + struct mdfld_dsi_pkg_sender *sender + = mdfld_dsi_get_pkg_sender(dsi_config); + + if (!sender || !data) { + DRM_ERROR("Invalid parameter\n"); + return -EINVAL; + } + + if (transmission == MDFLD_DSI_HS_TRANSMISSION) + return mdfld_dsi_read_mcs_hs(sender, dcs, data, 1); + else if (transmission == MDFLD_DSI_LP_TRANSMISSION) + return mdfld_dsi_read_mcs_lp(sender, dcs, data, 1); + else + return -EINVAL; +} + +int mdfld_dsi_get_power_mode(struct mdfld_dsi_config *dsi_config, + u32 *mode, + u8 transmission) +{ + if (!dsi_config || !mode) { + DRM_ERROR("Invalid parameter\n"); + return -EINVAL; + } + + return mdfld_dsi_get_panel_status(dsi_config, 0x0a, mode, transmission); +} + +int mdfld_dsi_get_diagnostic_result(struct mdfld_dsi_config *dsi_config, + u32 *result, + u8 transmission) +{ + if (!dsi_config || !result) { + DRM_ERROR("Invalid parameter\n"); + return -EINVAL; + } + + return mdfld_dsi_get_panel_status(dsi_config, 0x0f, result, + transmission); +} + /* * NOTE: this function was used by OSPM. * TODO: will be removed later, should work out display interfaces for OSPM @@ -459,14 +471,18 @@ static void mdfld_dsi_connector_restore(struct drm_connector * connector) static enum drm_connector_status mdfld_dsi_connector_detect(struct drm_connector * connector, bool force) { - return connector_status_connected; + struct psb_intel_output *psb_output + = to_psb_intel_output(connector); + struct mdfld_dsi_connector *dsi_connector + = MDFLD_DSI_CONNECTOR(psb_output); + return dsi_connector->status; } -static int mdfld_dsi_connector_set_property(struct drm_connector * connector, - struct drm_property * property, - uint64_t value) +static int mdfld_dsi_connector_set_property(struct drm_connector *connector, + struct drm_property *property, + uint64_t value) { - struct drm_encoder * encoder = connector->encoder; + struct drm_encoder *encoder = connector->encoder; if (!strcmp(property->name, "scaling mode") && encoder) { struct psb_intel_crtc * psb_crtc = to_psb_intel_crtc(encoder->crtc); @@ -633,9 +649,12 @@ static void mdfld_dsi_connector_dpms(struct drm_connector *connector, int mode) } /* Then check all display panels + monitors status */ + /* Make sure that the Display (B) sub-system status isn't i3 when + * R/W the DC register, otherwise "Fabric error" issue would occur + * during S0i3 state. */ if(!panel_on && !panel_on2 && !(REG_READ(HDMIB_CONTROL) & HDMIB_PORT_EN)) { - /*request rpm idle*/ + /* Request rpm idle */ if(dev_priv->rpm_enabled) pm_request_idle(&dev->pdev->dev); } @@ -652,8 +671,8 @@ static void mdfld_dsi_connector_dpms(struct drm_connector *connector, int mode) #endif } -static struct drm_encoder * mdfld_dsi_connector_best_encoder( - struct drm_connector * connector) +static struct drm_encoder *mdfld_dsi_connector_best_encoder( + struct drm_connector *connector) { struct psb_intel_output * psb_output = to_psb_intel_output(connector); struct mdfld_dsi_connector * dsi_connector = MDFLD_DSI_CONNECTOR(psb_output); @@ -755,16 +774,6 @@ mdfld_dsi_get_configuration_mode(struct mdfld_dsi_config * dsi_config, int pipe) mode->vtotal = mode->vdisplay + \ ((ti->vblank_hi << 8) | ti->vblank_lo); mode->clock = ti->pixel_clock * 10; - - dev_dbg(dev->dev, "hdisplay is %d\n", mode->hdisplay); - dev_dbg(dev->dev, "vdisplay is %d\n", mode->vdisplay); - dev_dbg(dev->dev, "HSS is %d\n", mode->hsync_start); - dev_dbg(dev->dev, "HSE is %d\n", mode->hsync_end); - dev_dbg(dev->dev, "htotal is %d\n", mode->htotal); - dev_dbg(dev->dev, "VSS is %d\n", mode->vsync_start); - dev_dbg(dev->dev, "VSE is %d\n", mode->vsync_end); - dev_dbg(dev->dev, "vtotal is %d\n", mode->vtotal); - dev_dbg(dev->dev, "clock is %d\n", mode->clock); } else { if(dsi_config->type == MDFLD_DSI_ENCODER_DPI) { if (mdfld_get_panel_type(dev, pipe) == TMD_VID) { @@ -810,6 +819,44 @@ mdfld_dsi_get_configuration_mode(struct mdfld_dsi_config * dsi_config, int pipe) return mode; } +int mdfld_dsi_panel_reset(int pipe) +{ + unsigned gpio; + int ret = 0; + + switch (pipe) { + case 0: + gpio = 128; + break; + case 2: + gpio = 34; + break; + default: + DRM_ERROR("Invalid output\n"); + return -EINVAL; + } + + ret = gpio_request(gpio, "gfx"); + if (ret) { + DRM_ERROR("gpio_rqueset failed\n"); + return ret; + } + + ret = gpio_direction_output(gpio, 1); + if (ret) { + DRM_ERROR("gpio_direction_output failed\n"); + goto gpio_error; + } + + gpio_get_value(128); + +gpio_error: + if (gpio_is_valid(gpio)) + gpio_free(gpio); + + return ret; +} + /* * MIPI output init * @dev drm device @@ -819,9 +866,9 @@ mdfld_dsi_get_configuration_mode(struct mdfld_dsi_config * dsi_config, int pipe) * Do the initialization of a MIPI output, including create DRM mode objects * initialization of DSI output on @pipe */ -void mdfld_dsi_output_init(struct drm_device * dev, +void mdfld_dsi_output_init(struct drm_device *dev, int pipe, - struct mdfld_dsi_config * config, + struct mdfld_dsi_config *config, struct panel_funcs* p_cmd_funcs, struct panel_funcs* p_vid_funcs) { @@ -869,7 +916,7 @@ void mdfld_dsi_output_init(struct drm_device * dev, dsi_config->changed = 1; dsi_config->dev = dev; - /*init fixed mode basing on DSI config type*/ + /* Init fixed mode basing on DSI config type */ if(dsi_config->type == MDFLD_DSI_ENCODER_DBI) { dsi_config->fixed_mode = p_cmd_funcs->get_config_mode(dev); if(p_cmd_funcs->get_panel_info(dev, pipe, &dsi_panel_info)) @@ -917,12 +964,18 @@ void mdfld_dsi_output_init(struct drm_device * dev, connector->interlace_allowed = false; connector->doublescan_allowed = false; - /*attach properties*/ + /* Attach properties */ drm_connector_attach_property(connector, dev->mode_config.scaling_mode_property, DRM_MODE_SCALE_FULLSCREEN); drm_connector_attach_property(connector, dev_priv->backlight_property, MDFLD_DSI_BRIGHTNESS_MAX_LEVEL); - /*init DBI & DPI encoders*/ - if(p_cmd_funcs) { + /* Init DSI package sender on this output */ + if (mdfld_dsi_pkg_sender_init(dsi_connector, pipe)) { + DRM_ERROR("Package Sender initialization failed on pipe %d\n", pipe); + goto dsi_init_err0; + } + + /* Init DBI & DPI encoders */ + if (p_cmd_funcs) { encoder = mdfld_dsi_dbi_init(dev, dsi_connector, p_cmd_funcs); if(!encoder) { dev_err(dev->dev, "Create DBI encoder failed\n"); @@ -930,12 +983,6 @@ void mdfld_dsi_output_init(struct drm_device * dev, } encoder->private = dsi_config; dsi_config->encoders[MDFLD_DSI_ENCODER_DBI] = encoder; - if(pipe == 2) - dev_priv->encoder2 = encoder; - - if(pipe == 0) - dev_priv->encoder0 = encoder; - } if(p_vid_funcs) { @@ -946,31 +993,16 @@ void mdfld_dsi_output_init(struct drm_device * dev, } encoder->private = dsi_config; dsi_config->encoders[MDFLD_DSI_ENCODER_DPI] = encoder; - - if(pipe == 2) - dev_priv->encoder2 = encoder; - - if(pipe == 0) - dev_priv->encoder0 = encoder; } drm_sysfs_connector_add(connector); - - /*init DSI package sender on this output*/ - if(mdfld_dsi_pkg_sender_init(dsi_connector, pipe)) { - dev_err(dev->dev, - "Package Sender initialization failed on pipe %d\n", - pipe); - goto dsi_init_err2; - } - - dev_dbg(dev->dev, "successfully\n"); return; /*TODO: add code to destroy outputs on error*/ -dsi_init_err2: - drm_sysfs_connector_remove(connector); dsi_init_err1: + /*destroy sender*/ + mdfld_dsi_pkg_sender_destroy(dsi_connector->pkg_sender); + drm_connector_cleanup(connector); kfree(dsi_config->fixed_mode); kfree(dsi_config); diff --git a/drivers/staging/gma500/mdfld_dsi_output.h b/drivers/staging/gma500/mdfld_dsi_output.h index 4300f10fbc86..4699267efd60 100644 --- a/drivers/staging/gma500/mdfld_dsi_output.h +++ b/drivers/staging/gma500/mdfld_dsi_output.h @@ -42,202 +42,6 @@ #include -#define DRM_MODE_ENCODER_MIPI 5 - -/* Medfield DSI controller registers */ - -#define MIPIA_DEVICE_READY_REG 0xb000 -#define MIPIA_INTR_STAT_REG 0xb004 -#define MIPIA_INTR_EN_REG 0xb008 -#define MIPIA_DSI_FUNC_PRG_REG 0xb00c -#define MIPIA_HS_TX_TIMEOUT_REG 0xb010 -#define MIPIA_LP_RX_TIMEOUT_REG 0xb014 -#define MIPIA_TURN_AROUND_TIMEOUT_REG 0xb018 -#define MIPIA_DEVICE_RESET_TIMER_REG 0xb01c -#define MIPIA_DPI_RESOLUTION_REG 0xb020 -#define MIPIA_DBI_FIFO_THROTTLE_REG 0xb024 -#define MIPIA_HSYNC_COUNT_REG 0xb028 -#define MIPIA_HBP_COUNT_REG 0xb02c -#define MIPIA_HFP_COUNT_REG 0xb030 -#define MIPIA_HACTIVE_COUNT_REG 0xb034 -#define MIPIA_VSYNC_COUNT_REG 0xb038 -#define MIPIA_VBP_COUNT_REG 0xb03c -#define MIPIA_VFP_COUNT_REG 0xb040 -#define MIPIA_HIGH_LOW_SWITCH_COUNT_REG 0xb044 -#define MIPIA_DPI_CONTROL_REG 0xb048 -#define MIPIA_DPI_DATA_REG 0xb04c -#define MIPIA_INIT_COUNT_REG 0xb050 -#define MIPIA_MAX_RETURN_PACK_SIZE_REG 0xb054 -#define MIPIA_VIDEO_MODE_FORMAT_REG 0xb058 -#define MIPIA_EOT_DISABLE_REG 0xb05c -#define MIPIA_LP_BYTECLK_REG 0xb060 -#define MIPIA_LP_GEN_DATA_REG 0xb064 -#define MIPIA_HS_GEN_DATA_REG 0xb068 -#define MIPIA_LP_GEN_CTRL_REG 0xb06c -#define MIPIA_HS_GEN_CTRL_REG 0xb070 -#define MIPIA_GEN_FIFO_STAT_REG 0xb074 -#define MIPIA_HS_LS_DBI_ENABLE_REG 0xb078 -#define MIPIA_DPHY_PARAM_REG 0xb080 -#define MIPIA_DBI_BW_CTRL_REG 0xb084 -#define MIPIA_CLK_LANE_SWITCH_TIME_CNT_REG 0xb088 - -#define DSI_DEVICE_READY (0x1) -#define DSI_POWER_STATE_ULPS_ENTER (0x2 << 1) -#define DSI_POWER_STATE_ULPS_EXIT (0x1 << 1) -#define DSI_POWER_STATE_ULPS_OFFSET (0x1) - - -#define DSI_ONE_DATA_LANE (0x1) -#define DSI_TWO_DATA_LANE (0x2) -#define DSI_THREE_DATA_LANE (0X3) -#define DSI_FOUR_DATA_LANE (0x4) -#define DSI_DPI_VIRT_CHANNEL_OFFSET (0x3) -#define DSI_DBI_VIRT_CHANNEL_OFFSET (0x5) -#define DSI_DPI_COLOR_FORMAT_RGB565 (0x01 << 7) -#define DSI_DPI_COLOR_FORMAT_RGB666 (0x02 << 7) -#define DSI_DPI_COLOR_FORMAT_RGB666_UNPACK (0x03 << 7) -#define DSI_DPI_COLOR_FORMAT_RGB888 (0x04 << 7) -#define DSI_DBI_COLOR_FORMAT_OPTION2 (0x05 << 13) - -#define DSI_INTR_STATE_RXSOTERROR 1 - -#define DSI_INTR_STATE_SPL_PKG_SENT (1 << 30) -#define DSI_INTR_STATE_TE (1 << 31) - -#define DSI_HS_TX_TIMEOUT_MASK (0xffffff) - -#define DSI_LP_RX_TIMEOUT_MASK (0xffffff) - -#define DSI_TURN_AROUND_TIMEOUT_MASK (0x3f) - -#define DSI_RESET_TIMER_MASK (0xffff) - -#define DSI_DBI_FIFO_WM_HALF (0x0) -#define DSI_DBI_FIFO_WM_QUARTER (0x1) -#define DSI_DBI_FIFO_WM_LOW (0x2) - -#define DSI_DPI_TIMING_MASK (0xffff) - -#define DSI_INIT_TIMER_MASK (0xffff) - -#define DSI_DBI_RETURN_PACK_SIZE_MASK (0x3ff) - -#define DSI_LP_BYTECLK_MASK (0x0ffff) - -#define DSI_HS_CTRL_GEN_SHORT_W0 (0x03) -#define DSI_HS_CTRL_GEN_SHORT_W1 (0x13) -#define DSI_HS_CTRL_GEN_SHORT_W2 (0x23) -#define DSI_HS_CTRL_GEN_R0 (0x04) -#define DSI_HS_CTRL_GEN_R1 (0x14) -#define DSI_HS_CTRL_GEN_R2 (0x24) -#define DSI_HS_CTRL_GEN_LONG_W (0x29) -#define DSI_HS_CTRL_MCS_SHORT_W0 (0x05) -#define DSI_HS_CTRL_MCS_SHORT_W1 (0x15) -#define DSI_HS_CTRL_MCS_R0 (0x06) -#define DSI_HS_CTRL_MCS_LONG_W (0x39) -#define DSI_HS_CTRL_VC_OFFSET (0x06) -#define DSI_HS_CTRL_WC_OFFSET (0x08) - -#define DSI_FIFO_GEN_HS_DATA_FULL (1 << 0) -#define DSI_FIFO_GEN_HS_DATA_HALF_EMPTY (1 << 1) -#define DSI_FIFO_GEN_HS_DATA_EMPTY (1 << 2) -#define DSI_FIFO_GEN_LP_DATA_FULL (1 << 8) -#define DSI_FIFO_GEN_LP_DATA_HALF_EMPTY (1 << 9) -#define DSI_FIFO_GEN_LP_DATA_EMPTY (1 << 10) -#define DSI_FIFO_GEN_HS_CTRL_FULL (1 << 16) -#define DSI_FIFO_GEN_HS_CTRL_HALF_EMPTY (1 << 17) -#define DSI_FIFO_GEN_HS_CTRL_EMPTY (1 << 18) -#define DSI_FIFO_GEN_LP_CTRL_FULL (1 << 24) -#define DSI_FIFO_GEN_LP_CTRL_HALF_EMPTY (1 << 25) -#define DSI_FIFO_GEN_LP_CTRL_EMPTY (1 << 26) -#define DSI_FIFO_DBI_EMPTY (1 << 27) -#define DSI_FIFO_DPI_EMPTY (1 << 28) - -#define DSI_DBI_HS_LP_SWITCH_MASK (0x1) - -#define DSI_HS_LP_SWITCH_COUNTER_OFFSET (0x0) -#define DSI_LP_HS_SWITCH_COUNTER_OFFSET (0x16) - -#define DSI_DPI_CTRL_HS_SHUTDOWN (0x00000001) -#define DSI_DPI_CTRL_HS_TURN_ON (0x00000002) - -/* Medfield DSI adapter registers */ -#define MIPIA_CONTROL_REG 0xb104 -#define MIPIA_DATA_ADD_REG 0xb108 -#define MIPIA_DATA_LEN_REG 0xb10c -#define MIPIA_CMD_ADD_REG 0xb110 -#define MIPIA_CMD_LEN_REG 0xb114 - -enum { - MDFLD_DSI_ENCODER_DBI = 0, - MDFLD_DSI_ENCODER_DPI, -}; - -enum { - MDFLD_DSI_VIDEO_NON_BURST_MODE_SYNC_PULSE = 1, - MDFLD_DSI_VIDEO_NON_BURST_MODE_SYNC_EVENTS = 2, - MDFLD_DSI_VIDEO_BURST_MODE = 3, -}; - -#define DSI_DPI_COMPLETE_LAST_LINE (1 << 2) -#define DSI_DPI_DISABLE_BTA (1 << 3) - -struct mdfld_dsi_connector_state { - u32 mipi_ctrl_reg; -}; - -struct mdfld_dsi_encoder_state { - -}; - -struct mdfld_dsi_connector { - /* - * This is ugly, but I have to use connector in it! :-( - * FIXME: use drm_connector instead. - */ - struct psb_intel_output base; - - int pipe; - void *private; - void *pkg_sender; -}; - -struct mdfld_dsi_encoder { - struct drm_encoder base; - void *private; -}; - -/* - * DSI config, consists of one DSI connector, two DSI encoders. - * DRM will pick up on DSI encoder basing on differents configs. - */ -struct mdfld_dsi_config { - struct drm_device *dev; - struct drm_display_mode *fixed_mode; - struct drm_display_mode *mode; - - struct mdfld_dsi_connector *connector; - struct mdfld_dsi_encoder *encoders[DRM_CONNECTOR_MAX_ENCODER]; - struct mdfld_dsi_encoder *encoder; - - int changed; - - int bpp; - int type; - int lane_count; - /*Virtual channel number for this encoder*/ - int channel_num; - /*video mode configure*/ - int video_mode; - - int dvr_ic_inited; -}; - -#define MDFLD_DSI_CONNECTOR(psb_output) \ - (container_of(psb_output, struct mdfld_dsi_connector, base)) - -#define MDFLD_DSI_ENCODER(encoder) \ - (container_of(encoder, struct mdfld_dsi_encoder, base)) static inline struct mdfld_dsi_config * mdfld_dsi_get_config(struct mdfld_dsi_connector *connector) @@ -323,5 +127,12 @@ extern void mdfld_dsi_output_init(struct drm_device *dev, int pipe, struct panel_funcs *p_vid_funcs); extern void mdfld_dsi_controller_init(struct mdfld_dsi_config *dsi_config, int pipe); +extern int mdfld_dsi_get_power_mode(struct mdfld_dsi_config *dsi_config, + u32 *mode, + u8 transmission); +extern int mdfld_dsi_get_diagnostic_result(struct mdfld_dsi_config *dsi_config, + u32 *result, + u8 transmission); +extern int mdfld_dsi_panel_reset(int pipe); #endif /*__MDFLD_DSI_OUTPUT_H__*/ diff --git a/drivers/staging/gma500/mdfld_dsi_pkg_sender.c b/drivers/staging/gma500/mdfld_dsi_pkg_sender.c index 745d4adc82b2..9b96a5c9abcd 100644 --- a/drivers/staging/gma500/mdfld_dsi_pkg_sender.c +++ b/drivers/staging/gma500/mdfld_dsi_pkg_sender.c @@ -29,8 +29,11 @@ #include "mdfld_dsi_output.h" #include "mdfld_dsi_pkg_sender.h" #include "mdfld_dsi_dbi.h" +#include "mdfld_dsi_dpi.h" -#define MDFLD_DSI_DBI_FIFO_TIMEOUT 100 +#define MDFLD_DSI_DBI_FIFO_TIMEOUT 100 +#define MDFLD_DSI_MAX_RETURN_PACKET_SIZE 512 +#define MDFLD_DSI_READ_MAX_COUNT 5000 static const char * const dsi_errors[] = { "RX SOT Error", @@ -404,8 +407,10 @@ static int send_pkg_prepare(struct mdfld_dsi_pkg_sender *sender, } /* Wait for 120 milliseconds in case exit_sleep_mode just be sent */ - if (cmd == enter_sleep_mode) + if (cmd == DCS_ENTER_SLEEP_MODE) { + /*TODO: replace it with msleep later*/ mdelay(120); + } return 0; } @@ -432,16 +437,18 @@ static int send_pkg_done(struct mdfld_dsi_pkg_sender *sender, } /* Update panel status */ - if (cmd == enter_sleep_mode) { + if (cmd == DCS_ENTER_SLEEP_MODE) { sender->panel_mode |= MDFLD_DSI_PANEL_MODE_SLEEP; /*TODO: replace it with msleep later*/ mdelay(120); - } else if (cmd == exit_sleep_mode) { + } else if (cmd == DCS_EXIT_SLEEP_MODE) { sender->panel_mode &= ~MDFLD_DSI_PANEL_MODE_SLEEP; /*TODO: replace it with msleep later*/ mdelay(120); - } - + } else if (unlikely(cmd == DCS_SOFT_RESET)) { + /*TODO: replace it with msleep later*/ + mdelay(5); + } sender->status = MDFLD_DSI_PKG_SENDER_FREE; return 0; @@ -470,6 +477,9 @@ static int do_send_pkg(struct mdfld_dsi_pkg_sender *sender, case MDFLD_DSI_PKG_GEN_SHORT_WRITE_0: case MDFLD_DSI_PKG_GEN_SHORT_WRITE_1: case MDFLD_DSI_PKG_GEN_SHORT_WRITE_2: + case MDFLD_DSI_PKG_GEN_READ_0: + case MDFLD_DSI_PKG_GEN_READ_1: + case MDFLD_DSI_PKG_GEN_READ_2: ret = send_gen_short_pkg(sender, pkg); break; case MDFLD_DSI_PKG_GEN_LONG_WRITE: @@ -477,6 +487,7 @@ static int do_send_pkg(struct mdfld_dsi_pkg_sender *sender, break; case MDFLD_DSI_PKG_MCS_SHORT_WRITE_0: case MDFLD_DSI_PKG_MCS_SHORT_WRITE_1: + case MDFLD_DSI_PKG_MCS_READ: ret = send_mcs_short_pkg(sender, pkg); break; case MDFLD_DSI_PKG_MCS_LONG_WRITE: @@ -548,6 +559,7 @@ static int mdfld_dbi_cb_init(struct mdfld_dsi_pkg_sender *sender, switch (pipe) { case 0: + /* FIXME: Doesn't this collide with stolen space ? */ phys = pg->gtt_phys_start - 0x1000; break; case 2: @@ -735,6 +747,292 @@ static int mdfld_dsi_send_gen_long(struct mdfld_dsi_pkg_sender *sender, return 0; } +static int __read_panel_data(struct mdfld_dsi_pkg_sender *sender, + struct mdfld_dsi_pkg *pkg, + u32 *data, + u16 len) +{ + unsigned long flags; + struct drm_device *dev = sender->dev; + int i; + u32 gen_data_reg; + int retry = MDFLD_DSI_READ_MAX_COUNT; + u8 transmission = pkg->transmission_type; + + /* + * do reading. + * 0) send out generic read request + * 1) polling read data avail interrupt + * 2) read data + */ + spin_lock_irqsave(&sender->lock, flags); + + REG_WRITE(sender->mipi_intr_stat_reg, 1 << 29); + + if ((REG_READ(sender->mipi_intr_stat_reg) & (1 << 29))) + DRM_ERROR("Can NOT clean read data valid interrupt\n"); + + /*send out read request*/ + send_pkg(sender, pkg); + + pkg_sender_put_pkg_locked(sender, pkg); + + /*polling read data avail interrupt*/ + while (retry && !(REG_READ(sender->mipi_intr_stat_reg) & (1 << 29))) { + udelay(100); + retry--; + } + + if (!retry) { + spin_unlock_irqrestore(&sender->lock, flags); + return -ETIMEDOUT; + } + + REG_WRITE(sender->mipi_intr_stat_reg, (1 << 29)); + + /*read data*/ + if (transmission == MDFLD_DSI_HS_TRANSMISSION) + gen_data_reg = sender->mipi_hs_gen_data_reg; + else if (transmission == MDFLD_DSI_LP_TRANSMISSION) + gen_data_reg = sender->mipi_lp_gen_data_reg; + else { + DRM_ERROR("Unknown transmission"); + spin_unlock_irqrestore(&sender->lock, flags); + return -EINVAL; + } + + for (i=0; ilock, flags); + + return 0; +} + +static int mdfld_dsi_read_gen(struct mdfld_dsi_pkg_sender *sender, + u8 param0, + u8 param1, + u8 param_num, + u32 *data, + u16 len, + u8 transmission) +{ + struct mdfld_dsi_pkg *pkg; + unsigned long flags; + + spin_lock_irqsave(&sender->lock, flags); + + pkg = pkg_sender_get_pkg_locked(sender); + + spin_unlock_irqrestore(&sender->lock,flags); + + if (!pkg) { + dev_err(sender->dev->dev, "No pkg memory\n"); + return -ENOMEM; + } + + switch (param_num) { + case 0: + pkg->pkg_type = MDFLD_DSI_PKG_GEN_READ_0; + pkg->pkg.short_pkg.cmd = 0; + pkg->pkg.short_pkg.param = 0; + break; + case 1: + pkg->pkg_type = MDFLD_DSI_PKG_GEN_READ_1; + pkg->pkg.short_pkg.cmd = param0; + pkg->pkg.short_pkg.param = 0; + break; + case 2: + pkg->pkg_type = MDFLD_DSI_PKG_GEN_READ_2; + pkg->pkg.short_pkg.cmd = param0; + pkg->pkg.short_pkg.param = param1; + break; + } + + pkg->transmission_type = transmission; + + INIT_LIST_HEAD(&pkg->entry); + + return __read_panel_data(sender, pkg, data, len); +} + +static int mdfld_dsi_read_mcs(struct mdfld_dsi_pkg_sender *sender, + u8 cmd, + u32 *data, + u16 len, + u8 transmission) +{ + struct mdfld_dsi_pkg *pkg; + unsigned long flags; + + spin_lock_irqsave(&sender->lock, flags); + + pkg = pkg_sender_get_pkg_locked(sender); + + spin_unlock_irqrestore(&sender->lock, flags); + + if (!pkg) { + dev_err(sender->dev->dev, "No pkg memory\n"); + return -ENOMEM; + } + + pkg->pkg_type = MDFLD_DSI_PKG_MCS_READ; + pkg->pkg.short_pkg.cmd = cmd; + pkg->pkg.short_pkg.param = 0; + + pkg->transmission_type = transmission; + + INIT_LIST_HEAD(&pkg->entry); + + return __read_panel_data(sender, pkg, data, len); +} + +void dsi_controller_dbi_init(struct mdfld_dsi_config * dsi_config, int pipe) +{ + struct drm_device * dev = dsi_config->dev; + u32 reg_offset = pipe ? MIPIC_REG_OFFSET : 0; + int lane_count = dsi_config->lane_count; + u32 val = 0; + + /*un-ready device*/ + REG_WRITE((MIPIA_DEVICE_READY_REG + reg_offset), 0x00000000); + + /*init dsi adapter before kicking off*/ + REG_WRITE((MIPIA_CONTROL_REG + reg_offset), 0x00000018); + + /*TODO: figure out how to setup these registers*/ + REG_WRITE((MIPIA_DPHY_PARAM_REG + reg_offset), 0x150c3408); + REG_WRITE((MIPIA_CLK_LANE_SWITCH_TIME_CNT_REG + reg_offset), 0x000a0014); + REG_WRITE((MIPIA_DBI_BW_CTRL_REG + reg_offset), 0x00000400); + REG_WRITE((MIPIA_DBI_FIFO_THROTTLE_REG + reg_offset), 0x00000001); + REG_WRITE((MIPIA_HS_LS_DBI_ENABLE_REG + reg_offset), 0x00000000); + + /*enable all interrupts*/ + REG_WRITE((MIPIA_INTR_EN_REG + reg_offset), 0xffffffff); + /*max value: 20 clock cycles of txclkesc*/ + REG_WRITE((MIPIA_TURN_AROUND_TIMEOUT_REG + reg_offset), 0x0000001f); + /*min 21 txclkesc, max: ffffh*/ + REG_WRITE((MIPIA_DEVICE_RESET_TIMER_REG + reg_offset), 0x0000ffff); + /*min: 7d0 max: 4e20*/ + REG_WRITE((MIPIA_INIT_COUNT_REG + reg_offset), 0x00000fa0); + + /*set up max return packet size*/ + REG_WRITE((MIPIA_MAX_RETURN_PACK_SIZE_REG + reg_offset), + MDFLD_DSI_MAX_RETURN_PACKET_SIZE); + + /*set up func_prg*/ + val |= lane_count; + val |= (dsi_config->channel_num << DSI_DBI_VIRT_CHANNEL_OFFSET); + val |= DSI_DBI_COLOR_FORMAT_OPTION2; + REG_WRITE((MIPIA_DSI_FUNC_PRG_REG + reg_offset), val); + + REG_WRITE((MIPIA_HS_TX_TIMEOUT_REG + reg_offset), 0x3fffff); + REG_WRITE((MIPIA_LP_RX_TIMEOUT_REG + reg_offset), 0xffff); + + REG_WRITE((MIPIA_HIGH_LOW_SWITCH_COUNT_REG + reg_offset), 0x46); + REG_WRITE((MIPIA_EOT_DISABLE_REG + reg_offset), 0x00000000); + REG_WRITE((MIPIA_LP_BYTECLK_REG + reg_offset), 0x00000004); + REG_WRITE((MIPIA_DEVICE_READY_REG + reg_offset), 0x00000001); +} + +void dsi_controller_dpi_init(struct mdfld_dsi_config * dsi_config, int pipe) +{ + struct drm_device * dev = dsi_config->dev; + u32 reg_offset = pipe ? MIPIC_REG_OFFSET : 0; + int lane_count = dsi_config->lane_count; + struct mdfld_dsi_dpi_timing dpi_timing; + struct drm_display_mode * mode = dsi_config->mode; + u32 val = 0; + + /*un-ready device*/ + REG_WRITE((MIPIA_DEVICE_READY_REG + reg_offset), 0x00000000); + + /*init dsi adapter before kicking off*/ + REG_WRITE((MIPIA_CONTROL_REG + reg_offset), 0x00000018); + + /*enable all interrupts*/ + REG_WRITE((MIPIA_INTR_EN_REG + reg_offset), 0xffffffff); + + /*set up func_prg*/ + val |= lane_count; + val |= dsi_config->channel_num << DSI_DPI_VIRT_CHANNEL_OFFSET; + + switch(dsi_config->bpp) { + case 16: + val |= DSI_DPI_COLOR_FORMAT_RGB565; + break; + case 18: + val |= DSI_DPI_COLOR_FORMAT_RGB666; + break; + case 24: + val |= DSI_DPI_COLOR_FORMAT_RGB888; + break; + default: + DRM_ERROR("unsupported color format, bpp = %d\n", dsi_config->bpp); + } + + REG_WRITE((MIPIA_DSI_FUNC_PRG_REG + reg_offset), val); + + REG_WRITE((MIPIA_HS_TX_TIMEOUT_REG + reg_offset), + (mode->vtotal * mode->htotal * dsi_config->bpp / (8 * lane_count)) & DSI_HS_TX_TIMEOUT_MASK); + REG_WRITE((MIPIA_LP_RX_TIMEOUT_REG + reg_offset), 0xffff & DSI_LP_RX_TIMEOUT_MASK); + + /*max value: 20 clock cycles of txclkesc*/ + REG_WRITE((MIPIA_TURN_AROUND_TIMEOUT_REG + reg_offset), 0x14 & DSI_TURN_AROUND_TIMEOUT_MASK); + + /*min 21 txclkesc, max: ffffh*/ + REG_WRITE((MIPIA_DEVICE_RESET_TIMER_REG + reg_offset), 0xffff & DSI_RESET_TIMER_MASK); + + REG_WRITE((MIPIA_DPI_RESOLUTION_REG + reg_offset), mode->vdisplay << 16 | mode->hdisplay); + + /*set DPI timing registers*/ + mdfld_dsi_dpi_timing_calculation(mode, &dpi_timing, dsi_config->lane_count, dsi_config->bpp); + + REG_WRITE((MIPIA_HSYNC_COUNT_REG + reg_offset), dpi_timing.hsync_count & DSI_DPI_TIMING_MASK); + REG_WRITE((MIPIA_HBP_COUNT_REG + reg_offset), dpi_timing.hbp_count & DSI_DPI_TIMING_MASK); + REG_WRITE((MIPIA_HFP_COUNT_REG + reg_offset), dpi_timing.hfp_count & DSI_DPI_TIMING_MASK); + REG_WRITE((MIPIA_HACTIVE_COUNT_REG + reg_offset), dpi_timing.hactive_count & DSI_DPI_TIMING_MASK); + REG_WRITE((MIPIA_VSYNC_COUNT_REG + reg_offset), dpi_timing.vsync_count & DSI_DPI_TIMING_MASK); + REG_WRITE((MIPIA_VBP_COUNT_REG + reg_offset), dpi_timing.vbp_count & DSI_DPI_TIMING_MASK); + REG_WRITE((MIPIA_VFP_COUNT_REG + reg_offset), dpi_timing.vfp_count & DSI_DPI_TIMING_MASK); + + REG_WRITE((MIPIA_HIGH_LOW_SWITCH_COUNT_REG + reg_offset), 0x46); + + /*min: 7d0 max: 4e20*/ + REG_WRITE((MIPIA_INIT_COUNT_REG + reg_offset), 0x000007d0); + + /*set up video mode*/ + val = dsi_config->video_mode | DSI_DPI_COMPLETE_LAST_LINE; + REG_WRITE((MIPIA_VIDEO_MODE_FORMAT_REG + reg_offset), val); + + REG_WRITE((MIPIA_EOT_DISABLE_REG + reg_offset), 0x00000000); + + REG_WRITE((MIPIA_LP_BYTECLK_REG + reg_offset), 0x00000004); + + /*TODO: figure out how to setup these registers*/ + REG_WRITE((MIPIA_DPHY_PARAM_REG + reg_offset), 0x150c3408); + + REG_WRITE((MIPIA_CLK_LANE_SWITCH_TIME_CNT_REG + reg_offset), (0xa << 16) | 0x14); + + /*set device ready*/ + REG_WRITE((MIPIA_DEVICE_READY_REG + reg_offset), 0x00000001); +} + +static void dsi_controller_init(struct mdfld_dsi_config * dsi_config, int pipe) +{ + if (!dsi_config || ((pipe != 0) && (pipe != 2))) { + DRM_ERROR("Invalid parameters\n"); + return; + } + + if (dsi_config->type == MDFLD_DSI_ENCODER_DPI) + dsi_controller_dpi_init(dsi_config, pipe); + else if (dsi_config->type == MDFLD_DSI_ENCODER_DBI) + dsi_controller_dbi_init(dsi_config, pipe); + else + DRM_ERROR("Bad DSI encoder type\n"); +} + void mdfld_dsi_cmds_kick_out(struct mdfld_dsi_pkg_sender *sender) { process_pkg_list(sender); @@ -774,7 +1072,7 @@ int mdfld_dsi_send_dcs(struct mdfld_dsi_pkg_sender *sender, * If dcs is write_mem_start, send it directly using DSI adapter * interface */ - if (dcs == write_mem_start) { + if (dcs == DCS_WRITE_MEM_START) { if (!spin_trylock(&sender->lock)) return -EAGAIN; @@ -944,6 +1242,69 @@ int mdfld_dsi_send_gen_long_lp(struct mdfld_dsi_pkg_sender *sender, MDFLD_DSI_LP_TRANSMISSION, delay); } +int mdfld_dsi_read_gen_hs(struct mdfld_dsi_pkg_sender *sender, + u8 param0, + u8 param1, + u8 param_num, + u32 *data, + u16 len) +{ + if (!sender || !data || param_num < 0 || param_num > 2 + || !data || !len) { + DRM_ERROR("Invalid parameters\n"); + return -EINVAL; + } + + return mdfld_dsi_read_gen(sender, param0, param1, param_num, + data, len, MDFLD_DSI_HS_TRANSMISSION); + +} + +int mdfld_dsi_read_gen_lp(struct mdfld_dsi_pkg_sender *sender, + u8 param0, + u8 param1, + u8 param_num, + u32 *data, + u16 len) +{ + if (!sender || !data || param_num < 0 || param_num > 2 + || !data || !len) { + DRM_ERROR("Invalid parameters\n"); + return -EINVAL; + } + + return mdfld_dsi_read_gen(sender, param0, param1, param_num, + data, len, MDFLD_DSI_LP_TRANSMISSION); +} + +int mdfld_dsi_read_mcs_hs(struct mdfld_dsi_pkg_sender *sender, + u8 cmd, + u32 *data, + u16 len) +{ + if (!sender || !data || !len) { + DRM_ERROR("Invalid parameters\n"); + return -EINVAL; + } + + return mdfld_dsi_read_mcs(sender, cmd, data, len, + MDFLD_DSI_HS_TRANSMISSION); +} + +int mdfld_dsi_read_mcs_lp(struct mdfld_dsi_pkg_sender *sender, + u8 cmd, + u32 *data, + u16 len) +{ + if (!sender || !data || !len) { + WARN_ON(1); + return -EINVAL; + } + + return mdfld_dsi_read_mcs(sender, cmd, data, len, + MDFLD_DSI_LP_TRANSMISSION); +} + int mdfld_dsi_pkg_sender_init(struct mdfld_dsi_connector *dsi_connector, int pipe) { @@ -956,6 +1317,7 @@ int mdfld_dsi_pkg_sender_init(struct mdfld_dsi_connector *dsi_connector, struct psb_gtt *pg = &dev_priv->gtt; int i; struct mdfld_dsi_pkg *pkg, *tmp; + u32 mipi_val = 0; if (!dsi_connector) { WARN_ON(1); @@ -1018,7 +1380,7 @@ int mdfld_dsi_pkg_sender_init(struct mdfld_dsi_connector *dsi_connector, pkg_sender->pipeconf_reg = PIPECCONF; pkg_sender->dsplinoff_reg = DSPCLINOFF; pkg_sender->dspsurf_reg = DSPCSURF; - pkg_sender->pipestat_reg = 72024; + pkg_sender->pipestat_reg = PIPECSTAT; pkg_sender->mipi_intr_stat_reg = MIPIA_INTR_STAT_REG + MIPIC_REG_OFFSET; @@ -1059,6 +1421,31 @@ int mdfld_dsi_pkg_sender_init(struct mdfld_dsi_connector *dsi_connector, INIT_LIST_HEAD(&pkg->entry); list_add_tail(&pkg->entry, &pkg_sender->free_list); } + + /* + * For video mode, don't enable DPI timing output here, + * will init the DPI timing output during mode setting. + */ + if (dsi_config->type == MDFLD_DSI_ENCODER_DPI) + mipi_val = PASS_FROM_SPHY_TO_AFE | SEL_FLOPPED_HSTX; + else if (dsi_config->type == MDFLD_DSI_ENCODER_DBI) + mipi_val = PASS_FROM_SPHY_TO_AFE | SEL_FLOPPED_HSTX + | TE_TRIGGER_GPIO_PIN; + else + DRM_ERROR("Bad DSI encoder type\n"); + + if (pipe == 0) { + mipi_val |= 0x2; + REG_WRITE(MIPI, mipi_val); + REG_READ(MIPI); + } else if (pipe == 2) { + REG_WRITE(MIPI_C, mipi_val); + REG_READ(MIPI_C); + } + + /*do dsi controller init*/ + dsi_controller_init(dsi_config, pipe); + return 0; pkg_alloc_err: diff --git a/drivers/staging/gma500/mdfld_dsi_pkg_sender.h b/drivers/staging/gma500/mdfld_dsi_pkg_sender.h index 296b1eac1404..f24abc700684 100644 --- a/drivers/staging/gma500/mdfld_dsi_pkg_sender.h +++ b/drivers/staging/gma500/mdfld_dsi_pkg_sender.h @@ -36,9 +36,13 @@ enum { MDFLD_DSI_PKG_GEN_SHORT_WRITE_0 = 0x03, MDFLD_DSI_PKG_GEN_SHORT_WRITE_1 = 0x13, MDFLD_DSI_PKG_GEN_SHORT_WRITE_2 = 0x23, + MDFLD_DSI_PKG_GEN_READ_0 = 0x04, + MDFLD_DSI_PKG_GEN_READ_1 = 0x14, + MDFLD_DSI_PKG_GEN_READ_2 = 0x24, MDFLD_DSI_PKG_GEN_LONG_WRITE = 0x29, MDFLD_DSI_PKG_MCS_SHORT_WRITE_0 = 0x05, MDFLD_DSI_PKG_MCS_SHORT_WRITE_1 = 0x15, + MDFLD_DSI_PKG_MCS_READ = 0x06, MDFLD_DSI_PKG_MCS_LONG_WRITE = 0x39, }; @@ -132,6 +136,18 @@ struct mdfld_dsi_pkg_sender { u32 mipi_cmd_len_reg; }; +/* DCS definitions */ +#define DCS_SOFT_RESET 0x01 +#define DCS_ENTER_SLEEP_MODE 0x10 +#define DCS_EXIT_SLEEP_MODE 0x11 +#define DCS_SET_DISPLAY_OFF 0x28 +#define DCS_SET_DISPLAY_ON 0x29 +#define DCS_SET_COLUMN_ADDRESS 0x2a +#define DCS_SET_PAGE_ADDRESS 0x2b +#define DCS_WRITE_MEM_START 0x2c +#define DCS_SET_TEAR_OFF 0x34 +#define DCS_SET_TEAR_ON 0x35 + extern int mdfld_dsi_pkg_sender_init(struct mdfld_dsi_connector *dsi_connector, int pipe); extern void mdfld_dsi_pkg_sender_destroy(struct mdfld_dsi_pkg_sender *sender); @@ -153,6 +169,16 @@ extern int mdfld_dsi_send_gen_long_hs(struct mdfld_dsi_pkg_sender *sender, u32 *data, u32 len, int delay); extern int mdfld_dsi_send_gen_long_lp(struct mdfld_dsi_pkg_sender *sender, u32 *data, u32 len, int delay); + +extern int mdfld_dsi_read_gen_hs(struct mdfld_dsi_pkg_sender *sender, + u8 param0, u8 param1, u8 param_num, u32 *data, u16 len); +extern int mdfld_dsi_read_gen_lp(struct mdfld_dsi_pkg_sender *sender, + u8 param0, u8 param1, u8 param_num, u32 *data, u16 len); +extern int mdfld_dsi_read_mcs_hs(struct mdfld_dsi_pkg_sender *sender, + u8 cmd, u32 *data, u16 len); +extern int mdfld_dsi_read_mcs_lp(struct mdfld_dsi_pkg_sender *sender, + u8 cmd, u32 *data, u16 len); + extern void mdfld_dsi_cmds_kick_out(struct mdfld_dsi_pkg_sender *sender); #endif /* __MDFLD_DSI_PKG_SENDER_H__ */ diff --git a/drivers/staging/gma500/mdfld_intel_display.c b/drivers/staging/gma500/mdfld_intel_display.c index fa8499082813..ac74a8d00b58 100644 --- a/drivers/staging/gma500/mdfld_intel_display.c +++ b/drivers/staging/gma500/mdfld_intel_display.c @@ -140,7 +140,6 @@ static int mdfld_intel_crtc_cursor_set(struct drm_crtc *crtc, uint32_t width, uint32_t height) { struct drm_device *dev = crtc->dev; - struct drm_psb_private * dev_priv = (struct drm_psb_private *)dev->dev_private; struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(crtc); int pipe = psb_intel_crtc->pipe; uint32_t control = CURACNTR; @@ -263,7 +262,7 @@ static int mdfld_intel_crtc_cursor_move(struct drm_crtc *crtc, int x, int y) case 0: #ifndef CONFIG_MDFLD_DSI_DPU if (!(dev_priv->dsr_fb_update & MDFLD_DSR_CURSOR_0)) - mdfld_dsi_dbi_exit_dsr (dev, MDFLD_DSR_CURSOR_0, 0, 0); + mdfld_dsi_dbi_exit_dsr (dev, MDFLD_DSR_CURSOR_0); #else /*CONFIG_MDFLD_DSI_DPU*/ rect.x = x; rect.y = y; @@ -279,7 +278,7 @@ static int mdfld_intel_crtc_cursor_move(struct drm_crtc *crtc, int x, int y) case 2: #ifndef CONFIG_MDFLD_DSI_DPU if (!(dev_priv->dsr_fb_update & MDFLD_DSR_CURSOR_2)) - mdfld_dsi_dbi_exit_dsr (dev, MDFLD_DSR_CURSOR_2, 0, 0); + mdfld_dsi_dbi_exit_dsr (dev, MDFLD_DSR_CURSOR_2); #else /*CONFIG_MDFLD_DSI_DPU*/ mdfld_dbi_dpu_report_damage(dev, MDFLD_CURSORC, &rect); mdfld_dpu_exit_dsr(dev); @@ -354,7 +353,6 @@ int mdfld__intel_pipe_set_base(struct drm_crtc *crtc, int x, int y, struct drm_f /* struct drm_i915_master_private *master_priv; */ struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(crtc); struct psb_framebuffer *psbfb = to_psb_fb(crtc->fb); - struct psb_intel_mode_device *mode_dev = psb_intel_crtc->mode_dev; int pipe = psb_intel_crtc->pipe; unsigned long start, offset; int dsplinoff = DSPALINOFF; diff --git a/drivers/staging/gma500/mdfld_output.c b/drivers/staging/gma500/mdfld_output.c index 7e11401d67bb..ffa2c1f0c192 100644 --- a/drivers/staging/gma500/mdfld_output.c +++ b/drivers/staging/gma500/mdfld_output.c @@ -100,7 +100,6 @@ static int init_panel(struct drm_device *dev, int mipi_pipe, int p_type) mdfld_dsi_output_init(dev, mipi_pipe, NULL, p_cmd_funcs, NULL); break; case PYR_VID: - /*pyr_vid_init(dev, p_vid_funcs); */ mdfld_dsi_output_init(dev, mipi_pipe, NULL, NULL, p_vid_funcs); break; case TPO: /* TPO panel supports both cmd & vid interfaces */ @@ -135,10 +134,15 @@ int mdfld_output_init(struct drm_device *dev) dev_info(dev->dev, "panel 1: type is %d\n", type); init_panel(dev, 0, type); +#ifdef CONFIG_MDFD_DUAL_MIPI /* MIPI panel 2 */ type = mdfld_get_panel_type(dev, 2); dev_info(dev->dev, "panel 2: type is %d\n", type); init_panel(dev, 2, type); - +#endif +#ifdef CONFIG_MDFD_HDMI + /* HDMI panel */ + init_panel(dev, 0, HDMI); +#endif return 0; } diff --git a/drivers/staging/gma500/mdfld_output.h b/drivers/staging/gma500/mdfld_output.h index 70f2302ad25f..e747fdb8913d 100644 --- a/drivers/staging/gma500/mdfld_output.h +++ b/drivers/staging/gma500/mdfld_output.h @@ -28,47 +28,6 @@ #ifndef MDFLD_OUTPUT_H #define MDFLD_OUTPUT_H -#include "psb_drv.h" - -/* Panel types */ -enum { - TPO_CMD, - TPO_VID, - TMD_CMD, - TMD_VID, - PYR_CMD, - PYR_VID, - TPO, - TMD, - PYR, - HDMI, - GCT_DETECT -}; - -/* Junk that belongs elsewhere */ -#define TPO_PANEL_WIDTH 84 -#define TPO_PANEL_HEIGHT 46 -#define TMD_PANEL_WIDTH 39 -#define TMD_PANEL_HEIGHT 71 -#define PYR_PANEL_WIDTH 53 -#define PYR_PANEL_HEIGHT 95 - -/* Panel interface */ -struct panel_info { - u32 width_mm; - u32 height_mm; -}; - -struct mdfld_dsi_dbi_output; - -struct panel_funcs { - const struct drm_encoder_funcs *encoder_funcs; - const struct drm_encoder_helper_funcs *encoder_helper_funcs; - struct drm_display_mode *(*get_config_mode) (struct drm_device *); - void (*update_fb) (struct mdfld_dsi_dbi_output *, int); - int (*get_panel_info) (struct drm_device *, int, struct panel_info *); -}; - int mdfld_output_init(struct drm_device *dev); int mdfld_panel_dpi(struct drm_device *dev); int mdfld_get_panel_type(struct drm_device *dev, int pipe); diff --git a/drivers/staging/gma500/mdfld_pyr_cmd.c b/drivers/staging/gma500/mdfld_pyr_cmd.c index 0d89384fe37d..5f38e8df3759 100644 --- a/drivers/staging/gma500/mdfld_pyr_cmd.c +++ b/drivers/staging/gma500/mdfld_pyr_cmd.c @@ -188,7 +188,7 @@ static void pyr_dsi_controller_dbi_init(struct mdfld_dsi_config *dsi_config, dev_dbg(dev->dev, "Init DBI interface on pipe %d...\n", pipe); - /* In-ready device */ + /* Un-ready device */ REG_WRITE((MIPIA_DEVICE_READY_REG + reg_offset), 0x00000000); /* Init dsi adapter before kicking off */ @@ -394,25 +394,13 @@ static void pyr_dsi_dbi_dpms(struct drm_encoder *encoder, int mode) struct mdfld_dsi_dbi_output *dbi_output = MDFLD_DSI_DBI_OUTPUT(dsi_encoder); struct drm_device *dev = dbi_output->dev; - struct drm_psb_private *dev_priv = dev->dev_private; - static bool bdispoff; dev_dbg(dev->dev, "%s\n", (mode == DRM_MODE_DPMS_ON ? "on" : "off")); - if (mode == DRM_MODE_DPMS_ON) { - if (/*gbgfxsuspended && */bdispoff) { - bdispoff = false; - dev_priv->dispstatus = true; - /*gbgfxsuspended = false; - */ - mdfld_dsi_dbi_exit_dsr(dev, MDFLD_DSR_2D_3D, 0, 0); - } + if (mode == DRM_MODE_DPMS_ON) pyr_dsi_dbi_set_power(encoder, true); - } else { - bdispoff = true; - dev_priv->dispstatus = false; + else pyr_dsi_dbi_set_power(encoder, false); - } } /* diff --git a/drivers/staging/gma500/mdfld_tmd_vid.c b/drivers/staging/gma500/mdfld_tmd_vid.c index b29c905f0771..affdc09c6769 100644 --- a/drivers/staging/gma500/mdfld_tmd_vid.c +++ b/drivers/staging/gma500/mdfld_tmd_vid.c @@ -114,6 +114,66 @@ static int tmd_vid_get_panel_info(struct drm_device *dev, return 0; } +/* + * mdfld_init_TMD_MIPI - initialise a TMD interface + * @dsi_config: configuration + * @pipe: pipe to configure + * + * This function is called only by mrst_dsi_mode_set and + * restore_display_registers. since this function does not + * acquire the mutex, it is important that the calling function + * does! + */ + + +static void mdfld_dsi_tmd_drv_ic_init(struct mdfld_dsi_config *dsi_config, + int pipe) +{ + static u32 tmd_cmd_mcap_off[] = {0x000000b2}; + static u32 tmd_cmd_enable_lane_switch[] = {0x000101ef}; + static u32 tmd_cmd_set_lane_num[] = {0x006360ef}; + static u32 tmd_cmd_pushing_clock0[] = {0x00cc2fef}; + static u32 tmd_cmd_pushing_clock1[] = {0x00dd6eef}; + static u32 tmd_cmd_set_mode[] = {0x000000b3}; + static u32 tmd_cmd_set_sync_pulse_mode[] = {0x000961ef}; + static u32 tmd_cmd_set_column[] = {0x0100002a, 0x000000df}; + static u32 tmd_cmd_set_page[] = {0x0300002b, 0x00000055}; + static u32 tmd_cmd_set_video_mode[] = {0x00000153}; + /*no auto_bl,need add in furture*/ + static u32 tmd_cmd_enable_backlight[] = {0x00005ab4}; + static u32 tmd_cmd_set_backlight_dimming[] = {0x00000ebd}; + + struct mdfld_dsi_pkg_sender *sender + = mdfld_dsi_get_pkg_sender(dsi_config); + + DRM_INFO("Enter mdfld init TMD MIPI display.\n"); + + if (!sender) { + DRM_ERROR("Cannot get sender\n"); + return; + } + + if (dsi_config->dvr_ic_inited) + return; + + msleep(3); + + mdfld_dsi_send_gen_long_lp(sender, tmd_cmd_mcap_off, 1, 0); + mdfld_dsi_send_gen_long_lp(sender, tmd_cmd_enable_lane_switch, 1, 0); + mdfld_dsi_send_gen_long_lp(sender, tmd_cmd_set_lane_num, 1, 0); + mdfld_dsi_send_gen_long_lp(sender, tmd_cmd_pushing_clock0, 1, 0); + mdfld_dsi_send_gen_long_lp(sender, tmd_cmd_pushing_clock1, 1, 0); + mdfld_dsi_send_gen_long_lp(sender, tmd_cmd_set_mode, 1, 0); + mdfld_dsi_send_gen_long_lp(sender, tmd_cmd_set_sync_pulse_mode, 1, 0); + mdfld_dsi_send_mcs_long_lp(sender, tmd_cmd_set_column, 2, 0); + mdfld_dsi_send_mcs_long_lp(sender, tmd_cmd_set_page, 2, 0); + mdfld_dsi_send_gen_long_lp(sender, tmd_cmd_set_video_mode, 1, 0); + mdfld_dsi_send_gen_long_lp(sender, tmd_cmd_enable_backlight, 1, 0); + mdfld_dsi_send_gen_long_lp(sender, tmd_cmd_set_backlight_dimming, 1, 0); + + dsi_config->dvr_ic_inited = 1; +} + /* TMD DPI encoder helper funcs */ static const struct drm_encoder_helper_funcs mdfld_tpo_dpi_encoder_helper_funcs = { @@ -141,4 +201,6 @@ void tmd_vid_init(struct drm_device *dev, struct panel_funcs *p_funcs) p_funcs->get_config_mode = &tmd_vid_get_config_mode; p_funcs->update_fb = NULL; p_funcs->get_panel_info = tmd_vid_get_panel_info; + p_funcs->reset = mdfld_dsi_panel_reset; + p_funcs->drv_ic_init = mdfld_dsi_tmd_drv_ic_init; } diff --git a/drivers/staging/gma500/mdfld_tpo_cmd.c b/drivers/staging/gma500/mdfld_tpo_cmd.c index d2e1818bb412..4cf7647257f9 100644 --- a/drivers/staging/gma500/mdfld_tpo_cmd.c +++ b/drivers/staging/gma500/mdfld_tpo_cmd.c @@ -126,11 +126,15 @@ static void mdfld_dsi_dbi_set_power(struct drm_encoder *encoder, bool on) struct mdfld_dsi_encoder *dsi_encoder = MDFLD_DSI_ENCODER(encoder); struct mdfld_dsi_dbi_output *dbi_output = MDFLD_DSI_DBI_OUTPUT(dsi_encoder); - /*struct drm_device *dev = dbi_output->dev;*/ + struct mdfld_dsi_config *dsi_config = + mdfld_dsi_encoder_get_config(dsi_encoder); + struct mdfld_dsi_pkg_sender *sender = + mdfld_dsi_encoder_get_pkg_sender(dsi_encoder); struct drm_device *dev = encoder->dev; struct drm_psb_private *dev_priv = dev->dev_private; u32 reg_offset = 0; int pipe = (dbi_output->channel_num == 0) ? 0 : 2; + u32 data = 0; dev_dbg(dev->dev, "pipe %d : %s, panel on: %s\n", pipe, on ? "On" : "Off", @@ -190,9 +194,33 @@ static void mdfld_dsi_dbi_set_power(struct drm_encoder *encoder, bool on) } } + /* + * FIXME: this is a WA for TPO panel crash on DPMS on & off around + * 83 times. the root cause of this issue is that Booster in + * drvIC crashed. Add this WA so that we can resume the driver IC + * once we found that booster has a fault + */ + mdfld_dsi_get_power_mode(dsi_config, + &data, + MDFLD_DSI_HS_TRANSMISSION); + + if (on && data && !(data & (1 << 7))) { + /* Soft reset */ + mdfld_dsi_send_dcs(sender, + DCS_SOFT_RESET, + NULL, + 0, + CMD_DATA_SRC_PIPE, + MDFLD_DSI_SEND_PACKAGE); + + /* Init drvIC */ + if (dbi_output->p_funcs->drv_ic_init) + dbi_output->p_funcs->drv_ic_init(dsi_config, + pipe); + } + out_err: gma_power_end(dev); - if (ret) dev_err(dev->dev, "failed\n"); } @@ -253,14 +281,6 @@ static void mdfld_dsi_dbi_mode_set(struct drm_encoder *encoder, return; } - /* Set up pipe related registers */ - REG_WRITE(mipi_reg, mipi_val); - REG_READ(mipi_reg); - - mdfld_dsi_controller_dbi_init(dsi_config, pipe); - - msleep(20); - REG_WRITE(dspcntr_reg, dspcntr_val); REG_READ(dspcntr_reg); @@ -268,7 +288,7 @@ static void mdfld_dsi_dbi_mode_set(struct drm_encoder *encoder, msleep(20); /* Send exit_sleep_mode DCS */ - ret = mdfld_dsi_dbi_send_dcs(dsi_output, exit_sleep_mode, + ret = mdfld_dsi_dbi_send_dcs(dsi_output, DCS_EXIT_SLEEP_MODE, NULL, 0, CMD_DATA_SRC_SYSTEM_MEM); if (ret) { dev_err(dev->dev, "sent exit_sleep_mode faild\n"); @@ -276,7 +296,7 @@ static void mdfld_dsi_dbi_mode_set(struct drm_encoder *encoder, } /* Send set_tear_on DCS */ - ret = mdfld_dsi_dbi_send_dcs(dsi_output, set_tear_on, + ret = mdfld_dsi_dbi_send_dcs(dsi_output, DCS_SET_TEAR_ON, ¶m, 1, CMD_DATA_SRC_SYSTEM_MEM); if (ret) { dev_err(dev->dev, "%s - sent set_tear_on faild\n", __func__); @@ -284,11 +304,6 @@ static void mdfld_dsi_dbi_mode_set(struct drm_encoder *encoder, } /* Do some init stuff */ - mdfld_dsi_brightness_init(dsi_config, pipe); - - mdfld_dsi_gen_fifo_ready(dev, (MIPIA_GEN_FIFO_STAT_REG + reg_offset), - HS_CTRL_FIFO_EMPTY | HS_DATA_FIFO_EMPTY); - REG_WRITE(pipeconf_reg, pipeconf_val | PIPEACONF_DSR); REG_READ(pipeconf_reg); @@ -375,23 +390,24 @@ static void mdfld_dsi_dbi_dpms(struct drm_encoder *encoder, int mode) * if everything goes right, hw_begin will resume them all * during set_power. */ - if (bdispoff) - mdfld_dsi_dbi_exit_dsr(dev, MDFLD_DSR_2D_3D, 0, 0); + if (bdispoff /* FIXME && gbgfxsuspended */) { + mdfld_dsi_dbi_exit_dsr(dev, MDFLD_DSR_2D_3D); + bdispoff = false; + dev_priv->dispstatus = true; + } mdfld_dsi_dbi_set_power(encoder, true); /* FIXME if (gbgfxsuspended) gbgfxsuspended = false; */ - bdispoff = false; - dev_priv->dispstatus = true; } else { /* * I am not sure whether this is the perfect place to * turn rpm on since we still have a lot of CRTC turnning * on work to do. */ - mdfld_dsi_dbi_set_power(encoder, false); bdispoff = true; dev_priv->dispstatus = false; + mdfld_dsi_dbi_set_power(encoder, false); } } @@ -446,7 +462,7 @@ static void mdfld_dsi_dbi_update_fb(struct mdfld_dsi_dbi_output *dbi_output, REG_READ(dspsurf_reg); mdfld_dsi_send_dcs(sender, - write_mem_start, + DCS_WRITE_MEM_START, NULL, 0, CMD_DATA_SRC_PIPE, @@ -492,4 +508,6 @@ void tpo_cmd_init(struct drm_device *dev, struct panel_funcs *p_funcs) p_funcs->get_config_mode = &tpo_cmd_get_config_mode; p_funcs->update_fb = mdfld_dsi_dbi_update_fb; p_funcs->get_panel_info = tpo_cmd_get_panel_info; + p_funcs->reset = mdfld_dsi_panel_reset; + p_funcs->drv_ic_init = mdfld_dsi_brightness_init; } diff --git a/drivers/staging/gma500/mrst_lvds.c b/drivers/staging/gma500/mrst_lvds.c index 25fde4cc910e..ac791c48eeda 100644 --- a/drivers/staging/gma500/mrst_lvds.c +++ b/drivers/staging/gma500/mrst_lvds.c @@ -58,11 +58,11 @@ static void mrst_lvds_set_power(struct drm_device *dev, pp_status = REG_READ(PP_STATUS); } while ((pp_status & (PP_ON | PP_READY)) == PP_READY); dev_priv->is_lvds_on = true; - if (dev_priv->ops->lvds_bl_power) - dev_priv->ops->lvds_bl_power(dev, true); + if (dev_priv->ops->lvds_bl_power) + dev_priv->ops->lvds_bl_power(dev, true); } else { - if (dev_priv->ops->lvds_bl_power) - dev_priv->ops->lvds_bl_power(dev, false); + if (dev_priv->ops->lvds_bl_power) + dev_priv->ops->lvds_bl_power(dev, false); REG_WRITE(PP_CONTROL, REG_READ(PP_CONTROL) & ~POWER_TARGET_ON); do { @@ -151,6 +151,7 @@ static void mrst_lvds_prepare(struct drm_encoder *encoder) { struct drm_device *dev = encoder->dev; struct psb_intel_output *output = enc_to_psb_intel_output(encoder); + struct psb_intel_mode_device *mode_dev = output->mode_dev; if (!gma_power_begin(dev, true)) return; @@ -162,23 +163,43 @@ static void mrst_lvds_prepare(struct drm_encoder *encoder) gma_power_end(dev); } +static u32 mrst_lvds_get_max_backlight(struct drm_device *dev) +{ + struct drm_psb_private *dev_priv = dev->dev_private; + u32 ret; + + if (gma_power_begin(dev, false)) { + ret = ((REG_READ(BLC_PWM_CTL) & + BACKLIGHT_MODULATION_FREQ_MASK) >> + BACKLIGHT_MODULATION_FREQ_SHIFT) * 2; + + gma_power_end(dev); + } else + ret = ((dev_priv->saveBLC_PWM_CTL & + BACKLIGHT_MODULATION_FREQ_MASK) >> + BACKLIGHT_MODULATION_FREQ_SHIFT) * 2; + + return ret; +} + static void mrst_lvds_commit(struct drm_encoder *encoder) { struct drm_device *dev = encoder->dev; struct psb_intel_output *output = enc_to_psb_intel_output(encoder); + struct psb_intel_mode_device *mode_dev = output->mode_dev; if (mode_dev->backlight_duty_cycle == 0) mode_dev->backlight_duty_cycle = - psb_intel_lvds_get_max_backlight(dev); + mrst_lvds_get_max_backlight(dev); mrst_lvds_set_power(dev, output, true); } static const struct drm_encoder_helper_funcs mrst_lvds_helper_funcs = { .dpms = mrst_lvds_dpms, .mode_fixup = psb_intel_lvds_mode_fixup, - .prepare = mrst_intel_lvds_prepare, + .prepare = mrst_lvds_prepare, .mode_set = mrst_lvds_mode_set, - .commit = mrst_intel_lvds_commit, + .commit = mrst_lvds_commit, }; static struct drm_display_mode lvds_configuration_modes[] = { diff --git a/drivers/staging/gma500/psb_drv.h b/drivers/staging/gma500/psb_drv.h index 194c64fb6c68..72f487a2a1b7 100644 --- a/drivers/staging/gma500/psb_drv.h +++ b/drivers/staging/gma500/psb_drv.h @@ -31,6 +31,7 @@ #include "gtt.h" #include "power.h" #include "mrst.h" +#include "medfield.h" /* Append new drm mode definition here, align with libdrm definition */ #define DRM_MODE_SCALE_NO_SCALE 2 @@ -216,8 +217,8 @@ enum { #define MDFLD_DSR_OVERLAY_0 (1 << 4) #define MDFLD_DSR_OVERLAY_2 (1 << 5) #define MDFLD_DSR_MIPI_CONTROL (1 << 6) -#define MDFLD_DSR_DAMAGE_MASK_0 (1 << 0) | (1 << 2) | (1 << 4) -#define MDFLD_DSR_DAMAGE_MASK_2 (1 << 1) | (1 << 3) | (1 << 5) +#define MDFLD_DSR_DAMAGE_MASK_0 ((1 << 0) | (1 << 2) | (1 << 4)) +#define MDFLD_DSR_DAMAGE_MASK_2 ((1 << 1) | (1 << 3) | (1 << 5)) #define MDFLD_DSR_2D_3D (MDFLD_DSR_2D_3D_0 | MDFLD_DSR_2D_3D_2) #define MDFLD_DSR_RR 45 @@ -605,7 +606,7 @@ struct drm_psb_private { uint32_t dsr_idle_count; bool is_in_idle; bool dsr_enable; - void (*exit_idle)(struct drm_device *dev, u32 update_src, void *p_surfaceAddr, bool check_hw_on_only); + void (*exit_idle)(struct drm_device *dev, u32 update_src); /* 2D acceleration */ struct mutex mutex_2d; -- 2.20.1