From 3aa2ae74ba630ec9b98736d64aea8e4cb490861d Mon Sep 17 00:00:00 2001 From: Russ Dill Date: Fri, 4 May 2012 04:24:47 -0700 Subject: [PATCH] USB: EHCI: OMAP: Finish ehci omap phy reset cycle before adding hcd. 'ARM: OMAP3: USB: Fix the EHCI ULPI PHY reset issue' (1fcb57d0f) created a regression with Beagleboard xM if booting the kernel after running 'usb start' under u-boot. Finishing the reset before calling 'usb_add_hcd' fixes the regression. This is most likely due to usb_add_hcd calling the driver's reset and init functions which expect the hardware to be up and running. Signed-off-by: Russ Dill Acked-by: Felipe Balbi Cc: stable [3.4] Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ehci-omap.c | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) diff --git a/drivers/usb/host/ehci-omap.c b/drivers/usb/host/ehci-omap.c index 5c78f9e71466..e669c6a7e91e 100644 --- a/drivers/usb/host/ehci-omap.c +++ b/drivers/usb/host/ehci-omap.c @@ -242,15 +242,6 @@ static int ehci_hcd_omap_probe(struct platform_device *pdev) ehci_reset(omap_ehci); - ret = usb_add_hcd(hcd, irq, IRQF_SHARED); - if (ret) { - dev_err(dev, "failed to add hcd with err %d\n", ret); - goto err_add_hcd; - } - - /* root ports should always stay powered */ - ehci_port_power(omap_ehci, 1); - if (pdata->phy_reset) { /* Hold the PHY in RESET for enough time till * PHY is settled and ready @@ -264,6 +255,15 @@ static int ehci_hcd_omap_probe(struct platform_device *pdev) gpio_set_value(pdata->reset_gpio_port[1], 1); } + ret = usb_add_hcd(hcd, irq, IRQF_SHARED); + if (ret) { + dev_err(dev, "failed to add hcd with err %d\n", ret); + goto err_add_hcd; + } + + /* root ports should always stay powered */ + ehci_port_power(omap_ehci, 1); + return 0; err_add_hcd: -- 2.20.1