From 3a36dd068f4308461661d28e8e14e11e426eba6b Mon Sep 17 00:00:00 2001 From: Lukasz Majewski Date: Sun, 13 May 2012 08:27:33 +0900 Subject: [PATCH] ARM: EXYNOS: Add s3c-hsotg device support for Universal C210 board This patch adds platform data for using S3C-HSOTG driver at Universal_C210 target. Signed-off-by: Lukasz Majewski Signed-off-by: Kyungmin Park Signed-off-by: Kukjin Kim --- arch/arm/mach-exynos/Kconfig | 2 ++ arch/arm/mach-exynos/mach-universal_c210.c | 10 ++++++++++ 2 files changed, 12 insertions(+) diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig index cbe0dad6c05e..a6a6a9417a01 100644 --- a/arch/arm/mach-exynos/Kconfig +++ b/arch/arm/mach-exynos/Kconfig @@ -250,6 +250,7 @@ config MACH_UNIVERSAL_C210 select S3C_DEV_I2C1 select S3C_DEV_I2C3 select S3C_DEV_I2C5 + select S3C_DEV_USB_HSOTG select S5P_DEV_I2C_HDMIPHY select S5P_DEV_MFC select S5P_DEV_ONENAND @@ -262,6 +263,7 @@ config MACH_UNIVERSAL_C210 select EXYNOS4_SETUP_SDHCI select EXYNOS4_SETUP_FIMC select S5P_SETUP_MIPIPHY + select EXYNOS4_SETUP_USB_PHY help Machine support for Samsung Mobile Universal S5PC210 Reference Board. diff --git a/arch/arm/mach-exynos/mach-universal_c210.c b/arch/arm/mach-exynos/mach-universal_c210.c index a34036eb8ba2..620f05341eb6 100644 --- a/arch/arm/mach-exynos/mach-universal_c210.c +++ b/arch/arm/mach-exynos/mach-universal_c210.c @@ -205,6 +205,7 @@ static struct regulator_init_data lp3974_ldo2_data = { }; static struct regulator_consumer_supply lp3974_ldo3_consumer[] = { + REGULATOR_SUPPLY("vusb_a", "s3c-hsotg"), REGULATOR_SUPPLY("vdd", "exynos4-hdmi"), REGULATOR_SUPPLY("vdd_pll", "exynos4-hdmi"), REGULATOR_SUPPLY("vdd11", "s5p-mipi-csis.0"), @@ -290,6 +291,7 @@ static struct regulator_init_data lp3974_ldo7_data = { }; static struct regulator_consumer_supply lp3974_ldo8_consumer[] = { + REGULATOR_SUPPLY("vusb_d", "s3c-hsotg"), REGULATOR_SUPPLY("vdd33a_dac", "s5p-sdo"), }; @@ -486,7 +488,10 @@ static struct regulator_init_data lp3974_vichg_data = { static struct regulator_init_data lp3974_esafeout1_data = { .constraints = { .name = "SAFEOUT1", + .min_uV = 4800000, + .max_uV = 4800000, .valid_ops_mask = REGULATOR_CHANGE_STATUS, + .always_on = 1, .state_mem = { .enabled = 1, }, @@ -994,6 +999,9 @@ static struct gpio universal_camera_gpios[] = { { GPIO_CAM_VGA_NSTBY, GPIOF_OUT_INIT_LOW, "CAM_VGA_NSTBY" }, }; +/* USB OTG */ +static struct s3c_hsotg_plat universal_hsotg_pdata; + static void __init universal_camera_init(void) { s3c_set_platdata(&mipi_csis_platdata, sizeof(mipi_csis_platdata), @@ -1049,6 +1057,7 @@ static struct platform_device *universal_devices[] __initdata = { &s5p_device_onenand, &s5p_device_fimd0, &s5p_device_jpeg, + &s3c_device_usb_hsotg, &s5p_device_mfc, &s5p_device_mfc_l, &s5p_device_mfc_r, @@ -1102,6 +1111,7 @@ static void __init universal_machine_init(void) i2c_register_board_info(I2C_GPIO_BUS_12, i2c_gpio12_devs, ARRAY_SIZE(i2c_gpio12_devs)); + s3c_hsotg_set_platdata(&universal_hsotg_pdata); universal_camera_init(); /* Last */ -- 2.20.1