From 39e3d67f8e839f06eacda53fe40da99ac137e094 Mon Sep 17 00:00:00 2001 From: Thomas Petazzoni Date: Wed, 31 Dec 2014 10:11:12 +0100 Subject: [PATCH] staging: fbtft: add fb_hx8340bn driver This commit adds the fb_hx8340bn driver from the fbtft project at https://github.com/notro/fbtft. Signed-off-by: Thomas Petazzoni Signed-off-by: Noralf Tronnes Signed-off-by: Greg Kroah-Hartman --- drivers/staging/fbtft/Kconfig | 6 + drivers/staging/fbtft/Makefile | 1 + drivers/staging/fbtft/fb_hx8340bn.c | 229 ++++++++++++++++++++++++++++ 3 files changed, 236 insertions(+) create mode 100644 drivers/staging/fbtft/fb_hx8340bn.c diff --git a/drivers/staging/fbtft/Kconfig b/drivers/staging/fbtft/Kconfig index 400492a5f640..e6c23d5ea8de 100644 --- a/drivers/staging/fbtft/Kconfig +++ b/drivers/staging/fbtft/Kconfig @@ -19,3 +19,9 @@ config FB_TFT_BD663474 depends on FB_TFT help Generic Framebuffer support for BD663474 + +config FB_TFT_HX8340BN + tristate "FB driver for the HX8340BN LCD Controller" + depends on FB_TFT + help + Generic Framebuffer support for HX8340BN diff --git a/drivers/staging/fbtft/Makefile b/drivers/staging/fbtft/Makefile index 9f80a6ecd60c..7d89af795b1c 100644 --- a/drivers/staging/fbtft/Makefile +++ b/drivers/staging/fbtft/Makefile @@ -5,3 +5,4 @@ fbtft-y += fbtft-core.o fbtft-sysfs.o fbtft-bus.o fbtft # drivers obj-$(CONFIG_FB_TFT_AGM1264K_FL) += fb_agm1264k-fl.o obj-$(CONFIG_FB_TFT_BD663474) += fb_bd663474.o +obj-$(CONFIG_FB_TFT_HX8340BN) += fb_hx8340bn.o diff --git a/drivers/staging/fbtft/fb_hx8340bn.c b/drivers/staging/fbtft/fb_hx8340bn.c new file mode 100644 index 000000000000..3939502f2c81 --- /dev/null +++ b/drivers/staging/fbtft/fb_hx8340bn.c @@ -0,0 +1,229 @@ +/* + * FB driver for the HX8340BN LCD Controller + * + * This display uses 9-bit SPI: Data/Command bit + 8 data bits + * For platforms that doesn't support 9-bit, the driver is capable + * of emulating this using 8-bit transfer. + * This is done by transfering eight 9-bit words in 9 bytes. + * + * Copyright (C) 2013 Noralf Tronnes + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include +#include +#include + +#include "fbtft.h" + +#define DRVNAME "fb_hx8340bn" +#define WIDTH 176 +#define HEIGHT 220 +#define TXBUFLEN (4 * PAGE_SIZE) +#define DEFAULT_GAMMA "1 3 0E 5 0 2 09 0 6 1 7 1 0 2 2\n" \ + "3 3 17 8 4 7 05 7 6 0 3 1 6 0 0 " + + +static bool emulate; +module_param(emulate, bool, 0); +MODULE_PARM_DESC(emulate, "Force emulation in 9-bit mode"); + + +static int init_display(struct fbtft_par *par) +{ + fbtft_par_dbg(DEBUG_INIT_DISPLAY, par, "%s()\n", __func__); + + par->fbtftops.reset(par); + + /* BTL221722-276L startup sequence, from datasheet */ + + /* SETEXTCOM: Set extended command set (C1h) + This command is used to set extended command set access enable. + Enable: After command (C1h), must write: ffh,83h,40h */ + write_reg(par, 0xC1, 0xFF, 0x83, 0x40); + + /* Sleep out + This command turns off sleep mode. + In this mode the DC/DC converter is enabled, Internal oscillator + is started, and panel scanning is started. */ + write_reg(par, 0x11); + mdelay(150); + + /* Undoc'd register? */ + write_reg(par, 0xCA, 0x70, 0x00, 0xD9); + + /* SETOSC: Set Internal Oscillator (B0h) + This command is used to set internal oscillator related settings */ + /* OSC_EN: Enable internal oscillator */ + /* Internal oscillator frequency: 125% x 2.52MHz */ + write_reg(par, 0xB0, 0x01, 0x11); + + /* Drive ability setting */ + write_reg(par, 0xC9, 0x90, 0x49, 0x10, 0x28, 0x28, 0x10, 0x00, 0x06); + mdelay(20); + + /* SETPWCTR5: Set Power Control 5(B5h) + This command is used to set VCOM Low and VCOM High Voltage */ + /* VCOMH 0110101 : 3.925 */ + /* VCOML 0100000 : -1.700 */ + /* 45h=69 VCOMH: "VMH" + 5d VCOML: "VMH" + 5d */ + write_reg(par, 0xB5, 0x35, 0x20, 0x45); + + /* SETPWCTR4: Set Power Control 4(B4h) + VRH[4:0]: Specify the VREG1 voltage adjusting. + VREG1 voltage is for gamma voltage setting. + BT[2:0]: Switch the output factor of step-up circuit 2 + for VGH and VGL voltage generation. */ + write_reg(par, 0xB4, 0x33, 0x25, 0x4C); + mdelay(10); + + /* Interface Pixel Format (3Ah) + This command is used to define the format of RGB picture data, + which is to be transfer via the system and RGB interface. */ + /* RGB interface: 16 Bit/Pixel */ + write_reg(par, 0x3A, 0x05); + + /* Display on (29h) + This command is used to recover from DISPLAY OFF mode. + Output from the Frame Memory is enabled. */ + write_reg(par, 0x29); + mdelay(10); + + return 0; +} + +void set_addr_win(struct fbtft_par *par, int xs, int ys, int xe, int ye) +{ + fbtft_par_dbg(DEBUG_SET_ADDR_WIN, par, + "%s(xs=%d, ys=%d, xe=%d, ye=%d)\n", __func__, xs, ys, xe, ye); + + write_reg(par, FBTFT_CASET, 0x00, xs, 0x00, xe); + write_reg(par, FBTFT_RASET, 0x00, ys, 0x00, ye); + write_reg(par, FBTFT_RAMWR); +} + +static int set_var(struct fbtft_par *par) +{ + fbtft_par_dbg(DEBUG_INIT_DISPLAY, par, "%s()\n", __func__); + + /* MADCTL - Memory data access control */ + /* RGB/BGR can be set with H/W pin SRGB and MADCTL BGR bit */ +#define MY (1 << 7) +#define MX (1 << 6) +#define MV (1 << 5) + switch (par->info->var.rotate) { + case 0: + write_reg(par, 0x36, (par->bgr << 3)); + break; + case 270: + write_reg(par, 0x36, MX | MV | (par->bgr << 3)); + break; + case 180: + write_reg(par, 0x36, MX | MY | (par->bgr << 3)); + break; + case 90: + write_reg(par, 0x36, MY | MV | (par->bgr << 3)); + break; + } + + return 0; +} + +/* + Gamma Curve selection, GC (only GC0 can be customized): + 0 = 2.2, 1 = 1.8, 2 = 2.5, 3 = 1.0 + Gamma string format: + OP0 OP1 CP0 CP1 CP2 CP3 CP4 MP0 MP1 MP2 MP3 MP4 MP5 CGM0 CGM1 + ON0 ON1 CN0 CN1 CN2 CN3 CN4 MN0 MN1 MN2 MN3 MN4 MN5 XXXX GC +*/ +#define CURVE(num, idx) curves[num*par->gamma.num_values + idx] +static int set_gamma(struct fbtft_par *par, unsigned long *curves) +{ + unsigned long mask[] = { + 0b1111, 0b1111, 0b11111, 0b1111, 0b1111, 0b1111, 0b11111, + 0b111, 0b111, 0b111, 0b111, 0b111, 0b111, 0b11, 0b11, + 0b1111, 0b1111, 0b11111, 0b1111, 0b1111, 0b1111, 0b11111, + 0b111, 0b111, 0b111, 0b111, 0b111, 0b111, 0b0, 0b0 }; + int i, j; + + fbtft_par_dbg(DEBUG_INIT_DISPLAY, par, "%s()\n", __func__); + + /* apply mask */ + for (i = 0; i < par->gamma.num_curves; i++) + for (j = 0; j < par->gamma.num_values; j++) + CURVE(i, j) &= mask[i * par->gamma.num_values + j]; + + write_reg(par, 0x26, 1 << CURVE(1, 14)); /* Gamma Set (26h) */ + + if (CURVE(1, 14)) + return 0; /* only GC0 can be customized */ + + write_reg(par, 0xC2, + (CURVE(0, 8) << 4) | CURVE(0, 7), + (CURVE(0, 10) << 4) | CURVE(0, 9), + (CURVE(0, 12) << 4) | CURVE(0, 11), + CURVE(0, 2), + (CURVE(0, 4) << 4) | CURVE(0, 3), + CURVE(0, 5), + CURVE(0, 6), + (CURVE(0, 1) << 4) | CURVE(0, 0), + (CURVE(0, 14) << 2) | CURVE(0, 13)); + + write_reg(par, 0xC3, + (CURVE(1, 8) << 4) | CURVE(1, 7), + (CURVE(1, 10) << 4) | CURVE(1, 9), + (CURVE(1, 12) << 4) | CURVE(1, 11), + CURVE(1, 2), + (CURVE(1, 4) << 4) | CURVE(1, 3), + CURVE(1, 5), + CURVE(1, 6), + (CURVE(1, 1) << 4) | CURVE(1, 0)); + + mdelay(10); + + return 0; +} +#undef CURVE + + +static struct fbtft_display display = { + .regwidth = 8, + .width = WIDTH, + .height = HEIGHT, + .txbuflen = TXBUFLEN, + .gamma_num = 2, + .gamma_len = 15, + .gamma = DEFAULT_GAMMA, + .fbtftops = { + .init_display = init_display, + .set_addr_win = set_addr_win, + .set_var = set_var, + .set_gamma = set_gamma, + }, +}; +FBTFT_REGISTER_DRIVER(DRVNAME, "himax,hx8340bn", &display); + +MODULE_ALIAS("spi:" DRVNAME); +MODULE_ALIAS("platform:" DRVNAME); +MODULE_ALIAS("spi:hx8340bn"); +MODULE_ALIAS("platform:hx8340bn"); + +MODULE_DESCRIPTION("FB driver for the HX8340BN LCD Controller"); +MODULE_AUTHOR("Noralf Tronnes"); +MODULE_LICENSE("GPL"); -- 2.20.1