From 39991a7aa8d527164a87f90bb18b07b2699ed7d0 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Wed, 13 Jun 2018 15:48:22 -0700 Subject: [PATCH] x86/speculation/l1tf: Change order of offset/type in swap entry commit bcd11afa7adad8d720e7ba5ef58bdcd9775cf45f upstream If pages are swapped out, the swap entry is stored in the corresponding PTE, which has the Present bit cleared. CPUs vulnerable to L1TF speculate on PTE entries which have the present bit set and would treat the swap entry as phsyical address (PFN). To mitigate that the upper bits of the PTE must be set so the PTE points to non existent memory. The swap entry stores the type and the offset of a swapped out page in the PTE. type is stored in bit 9-13 and offset in bit 14-63. The hardware ignores the bits beyond the phsyical address space limit, so to make the mitigation effective its required to start 'offset' at the lowest possible bit so that even large swap offsets do not reach into the physical address space limit bits. Move offset to bit 9-58 and type to bit 59-63 which are the bits that hardware generally doesn't care about. That, in turn, means that if you on desktop chip with only 40 bits of physical addressing, now that the offset starts at bit 9, there needs to be 30 bits of offset actually *in use* until bit 39 ends up being set, which means when inverted it will again point into existing memory. So that's 4 terabyte of swap space (because the offset is counted in pages, so 30 bits of offset is 42 bits of actual coverage). With bigger physical addressing, that obviously grows further, until the limit of the offset is hit (at 50 bits of offset - 62 bits of actual swap file coverage). This is a preparatory change for the actual swap entry inversion to protect against L1TF. [ AK: Updated description and minor tweaks. Split into two parts ] [ tglx: Massaged changelog ] Signed-off-by: Linus Torvalds Signed-off-by: Andi Kleen Signed-off-by: Thomas Gleixner Tested-by: Andi Kleen Reviewed-by: Josh Poimboeuf Acked-by: Michal Hocko Acked-by: Vlastimil Babka Acked-by: Dave Hansen Signed-off-by: Greg Kroah-Hartman --- arch/x86/include/asm/pgtable_64.h | 31 ++++++++++++++++++++----------- 1 file changed, 20 insertions(+), 11 deletions(-) diff --git a/arch/x86/include/asm/pgtable_64.h b/arch/x86/include/asm/pgtable_64.h index 1149d2112b2e..24e2f7aad03d 100644 --- a/arch/x86/include/asm/pgtable_64.h +++ b/arch/x86/include/asm/pgtable_64.h @@ -276,7 +276,7 @@ static inline int pgd_large(pgd_t pgd) { return 0; } * * | ... | 11| 10| 9|8|7|6|5| 4| 3|2| 1|0| <- bit number * | ... |SW3|SW2|SW1|G|L|D|A|CD|WT|U| W|P| <- bit names - * | OFFSET (14->63) | TYPE (9-13) |0|0|X|X| X| X|X|SD|0| <- swp entry + * | TYPE (59-63) | OFFSET (9-58) |0|0|X|X| X| X|X|SD|0| <- swp entry * * G (8) is aliased and used as a PROT_NONE indicator for * !present ptes. We need to start storing swap entries above @@ -290,19 +290,28 @@ static inline int pgd_large(pgd_t pgd) { return 0; } * Bit 7 in swp entry should be 0 because pmd_present checks not only P, * but also L and G. */ -#define SWP_TYPE_FIRST_BIT (_PAGE_BIT_PROTNONE + 1) -#define SWP_TYPE_BITS 5 -/* Place the offset above the type: */ -#define SWP_OFFSET_FIRST_BIT (SWP_TYPE_FIRST_BIT + SWP_TYPE_BITS) +#define SWP_TYPE_BITS 5 + +#define SWP_OFFSET_FIRST_BIT (_PAGE_BIT_PROTNONE + 1) + +/* We always extract/encode the offset by shifting it all the way up, and then down again */ +#define SWP_OFFSET_SHIFT (SWP_OFFSET_FIRST_BIT+SWP_TYPE_BITS) #define MAX_SWAPFILES_CHECK() BUILD_BUG_ON(MAX_SWAPFILES_SHIFT > SWP_TYPE_BITS) -#define __swp_type(x) (((x).val >> (SWP_TYPE_FIRST_BIT)) \ - & ((1U << SWP_TYPE_BITS) - 1)) -#define __swp_offset(x) ((x).val >> SWP_OFFSET_FIRST_BIT) -#define __swp_entry(type, offset) ((swp_entry_t) { \ - ((type) << (SWP_TYPE_FIRST_BIT)) \ - | ((offset) << SWP_OFFSET_FIRST_BIT) }) +/* Extract the high bits for type */ +#define __swp_type(x) ((x).val >> (64 - SWP_TYPE_BITS)) + +/* Shift up (to get rid of type), then down to get value */ +#define __swp_offset(x) ((x).val << SWP_TYPE_BITS >> SWP_OFFSET_SHIFT) + +/* + * Shift the offset up "too far" by TYPE bits, then down again + */ +#define __swp_entry(type, offset) ((swp_entry_t) { \ + ((unsigned long)(offset) << SWP_OFFSET_SHIFT >> SWP_TYPE_BITS) \ + | ((unsigned long)(type) << (64-SWP_TYPE_BITS)) }) + #define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val((pte)) }) #define __pmd_to_swp_entry(pmd) ((swp_entry_t) { pmd_val((pmd)) }) #define __swp_entry_to_pte(x) ((pte_t) { .pte = (x).val }) -- 2.20.1