From 375c568844e49d292885c7485d4a255f71680e56 Mon Sep 17 00:00:00 2001 From: stephen hemminger Date: Sun, 7 Feb 2010 06:28:36 +0000 Subject: [PATCH] sky2: receive checksum refactoring Break the largish case for handling receive checksum into a separate function, and if there is a problem use dev_XXX routines to show which hardware is the problem. Turn one corner case into a BUG(). This only happens if the driver is expecting one behavior but the chip does the old behavior; only ever saw this when bringing up a new chip type and driver was buggy. Signed-off-by: Stephen Hemminger Signed-off-by: David S. Miller --- drivers/net/sky2.c | 59 ++++++++++++++++++++++------------------------ 1 file changed, 28 insertions(+), 31 deletions(-) diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c index 1aa1f3316702..478288b8bc21 100644 --- a/drivers/net/sky2.c +++ b/drivers/net/sky2.c @@ -2484,6 +2484,32 @@ static inline void sky2_rx_done(struct sky2_hw *hw, unsigned port, } } +static void sky2_rx_checksum(struct sky2_port *sky2, u32 status) +{ + /* If this happens then driver assuming wrong format for chip type */ + BUG_ON(sky2->hw->flags & SKY2_HW_NEW_LE); + + /* Both checksum counters are programmed to start at + * the same offset, so unless there is a problem they + * should match. This failure is an early indication that + * hardware receive checksumming won't work. + */ + if (likely((u16)(status >> 16) == (u16)status)) { + struct sk_buff *skb = sky2->rx_ring[sky2->rx_next].skb; + skb->ip_summed = CHECKSUM_COMPLETE; + skb->csum = le16_to_cpu(status); + } else { + dev_notice(&sky2->hw->pdev->dev, + "%s: receive checksum problem (status = %#x)\n", + sky2->netdev->name, status); + + /* Disable checksum offload */ + sky2->flags &= ~SKY2_FLAG_RX_CHECKSUM; + sky2_write32(sky2->hw, Q_ADDR(rxqaddr[sky2->port], Q_CSR), + BMU_DIS_RX_CHKSUM); + } +} + /* Process status response ring */ static int sky2_status_intr(struct sky2_hw *hw, int to_do, u16 idx) { @@ -2552,37 +2578,8 @@ static int sky2_status_intr(struct sky2_hw *hw, int to_do, u16 idx) /* fall through */ #endif case OP_RXCHKS: - if (!(sky2->flags & SKY2_FLAG_RX_CHECKSUM)) - break; - - /* If this happens then driver assuming wrong format */ - if (unlikely(hw->flags & SKY2_HW_NEW_LE)) { - if (net_ratelimit()) - printk(KERN_NOTICE "%s: unexpected" - " checksum status\n", - dev->name); - break; - } - - /* Both checksum counters are programmed to start at - * the same offset, so unless there is a problem they - * should match. This failure is an early indication that - * hardware receive checksumming won't work. - */ - if (likely(status >> 16 == (status & 0xffff))) { - skb = sky2->rx_ring[sky2->rx_next].skb; - skb->ip_summed = CHECKSUM_COMPLETE; - skb->csum = le16_to_cpu(status); - } else { - printk(KERN_NOTICE PFX "%s: hardware receive " - "checksum problem (status = %#x)\n", - dev->name, status); - sky2->flags &= ~SKY2_FLAG_RX_CHECKSUM; - - sky2_write32(sky2->hw, - Q_ADDR(rxqaddr[port], Q_CSR), - BMU_DIS_RX_CHKSUM); - } + if (likely(sky2->flags & SKY2_FLAG_RX_CHECKSUM)) + sky2_rx_checksum(sky2, status); break; case OP_TXINDEXLE: -- 2.20.1