From 365b01869bca1c9d5ecb05be7857739fa18a9b8c Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Mon, 31 Mar 2014 15:50:34 +0100 Subject: [PATCH] clk: shmobile: rcar-gen2: fix lb/sd0/sd1/sdh clock parent to pll1 The clock generator for rcar-gen2 has the lb, sdh, sd0 and sd1 clocks parented to pll1_div2 where the hardware diagram shows these to be directly fed from pll1. This fixes the initial rate for sdh0 clock to be 97.5MHz instead of the reported 48MHz where the manual says the default register values are for 97.5MHz. Signed-off-by: Ben Dooks Acked-by: Laurent Pinchart Signed-off-by: Mike Turquette --- drivers/clk/shmobile/clk-rcar-gen2.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/clk/shmobile/clk-rcar-gen2.c b/drivers/clk/shmobile/clk-rcar-gen2.c index dd272a0d1446..a32eddd32589 100644 --- a/drivers/clk/shmobile/clk-rcar-gen2.c +++ b/drivers/clk/shmobile/clk-rcar-gen2.c @@ -210,22 +210,22 @@ rcar_gen2_cpg_register_clock(struct device_node *np, struct rcar_gen2_cpg *cpg, parent_name = "main"; mult = config->pll3_mult; } else if (!strcmp(name, "lb")) { - parent_name = "pll1_div2"; + parent_name = "pll1"; div = cpg_mode & BIT(18) ? 36 : 24; } else if (!strcmp(name, "qspi")) { parent_name = "pll1_div2"; div = (cpg_mode & (BIT(3) | BIT(2) | BIT(1))) == BIT(2) ? 8 : 10; } else if (!strcmp(name, "sdh")) { - parent_name = "pll1_div2"; + parent_name = "pll1"; table = cpg_sdh_div_table; shift = 8; } else if (!strcmp(name, "sd0")) { - parent_name = "pll1_div2"; + parent_name = "pll1"; table = cpg_sd01_div_table; shift = 4; } else if (!strcmp(name, "sd1")) { - parent_name = "pll1_div2"; + parent_name = "pll1"; table = cpg_sd01_div_table; shift = 0; } else if (!strcmp(name, "z")) { -- 2.20.1