From 3634ff6a32e90d9db0ec19297e80059143c1aa7f Mon Sep 17 00:00:00 2001 From: Stig Telfer Date: Sat, 8 Oct 2005 00:21:48 +0200 Subject: [PATCH] [PATCH] i2c: Fix i2c-elektor on Alpha This patch updates the i2c-elektor driver, enabling it to compile cleanly, load and run. The key change is that it uses the new __iomem/iowrite8/ioread8 functions to abstract the direct or memory-mapped variants of register access. Also, the original driver would crash on module load on the Alpha because the PCI memory region was not remapped into kernel memory. I have managed the following testing: * compiled and tested it on my Alpha UP2000+ system. * compiles cleanly for x86 but I don't have the hardware to test. Signed-off-by: Stig Telfer Signed-off-by: Jean Delvare Signed-off-by: Greg Kroah-Hartman --- drivers/i2c/busses/i2c-elektor.c | 74 +++++++++++++++++++++----------- 1 file changed, 49 insertions(+), 25 deletions(-) diff --git a/drivers/i2c/busses/i2c-elektor.c b/drivers/i2c/busses/i2c-elektor.c index 6930b660e50..75b4b442a63 100644 --- a/drivers/i2c/busses/i2c-elektor.c +++ b/drivers/i2c/busses/i2c-elektor.c @@ -46,6 +46,8 @@ #define DEFAULT_BASE 0x330 static int base; +static u8 __iomem *base_iomem; + static int irq; static int clock = 0x1c; static int own = 0x55; @@ -64,36 +66,27 @@ static spinlock_t lock; static void pcf_isa_setbyte(void *data, int ctl, int val) { - int address = ctl ? (base + 1) : base; + u8 __iomem *address = ctl ? (base_iomem + 1) : base_iomem; /* enable irq if any specified for serial operation */ if (ctl && irq && (val & I2C_PCF_ESO)) { val |= I2C_PCF_ENI; } - pr_debug("i2c-elektor: Write 0x%X 0x%02X\n", address, val & 255); - - switch (mmapped) { - case 0: /* regular I/O */ - outb(val, address); - break; - case 2: /* double mapped I/O needed for UP2000 board, - I don't know why this... */ - writeb(val, (void *)address); - /* fall */ - case 1: /* memory mapped I/O */ - writeb(val, (void *)address); - break; - } + pr_debug("i2c-elektor: Write %p 0x%02X\n", address, val); + iowrite8(val, address); +#ifdef __alpha__ + /* API UP2000 needs some hardware fudging to make the write stick */ + iowrite8(val, address); +#endif } static int pcf_isa_getbyte(void *data, int ctl) { - int address = ctl ? (base + 1) : base; - int val = mmapped ? readb((void *)address) : inb(address); - - pr_debug("i2c-elektor: Read 0x%X 0x%02X\n", address, val); + u8 __iomem *address = ctl ? (base_iomem + 1) : base_iomem; + int val = ioread8(address); + pr_debug("i2c-elektor: Read %p 0x%02X\n", address, val); return (val); } @@ -155,7 +148,30 @@ static int pcf_isa_init(void) "is in use.\n", base); return -ENODEV; } + base_iomem = ioport_map(base, 2); + if (!base_iomem) { + printk(KERN_ERR "i2c-elektor: remap of I/O region " + "%#x failed\n", base); + release_region(base, 2); + return -ENODEV; + } + } else { + if (!request_mem_region(base, 2, "i2c-elektor")) { + printk(KERN_ERR "i2c-elektor: requested memory region " + "(%#x:2) is in use\n", base); + return -ENODEV; + } + base_iomem = ioremap(base, 2); + if (base_iomem == NULL) { + printk(KERN_ERR "i2c-elektor: remap of memory region " + "%#x failed\n", base); + release_mem_region(base, 2); + return -ENODEV; + } } + pr_debug("i2c-elektor: registers %#x remapped to %p\n", base, + base_iomem); + if (irq > 0) { if (request_irq(irq, pcf_isa_handler, 0, "PCF8584", NULL) < 0) { printk(KERN_ERR "i2c-elektor: Request irq%d failed\n", irq); @@ -200,7 +216,7 @@ static int __init i2c_pcfisa_init(void) cy693_dev = pci_get_device(PCI_VENDOR_ID_CONTAQ, PCI_DEVICE_ID_CONTAQ_82C693, NULL); if (cy693_dev) { - char config; + unsigned char config; /* yeap, we've found cypress, let's check config */ if (!pci_read_config_byte(cy693_dev, 0x47, &config)) { @@ -219,9 +235,7 @@ static int __init i2c_pcfisa_init(void) if ((config & 0x7f) == 0x61) { /* seems to be UP2000 like board */ base = 0xe0000; - /* I don't know why we need to - write twice */ - mmapped = 2; + mmapped = 1; /* UP2000 drives ISA with 8.25 MHz (PCI/4) clock (this can be read from cypress) */ @@ -262,8 +276,13 @@ static int __init i2c_pcfisa_init(void) free_irq(irq, NULL); } - if (!mmapped) + if (!mmapped) { + ioport_unmap(base_iomem); release_region(base , 2); + } else { + iounmap(base_iomem); + release_mem_region(base, 2); + } return -ENODEV; } @@ -276,8 +295,13 @@ static void i2c_pcfisa_exit(void) free_irq(irq, NULL); } - if (!mmapped) + if (!mmapped) { + ioport_unmap(base_iomem); release_region(base , 2); + } else { + iounmap(base_iomem); + release_mem_region(base, 2); + } } MODULE_AUTHOR("Hans Berglund "); -- 2.20.1