From 35d678664873041026171b4b5e1cec49299e33a0 Mon Sep 17 00:00:00 2001 From: Tomi Valkeinen Date: Tue, 21 Aug 2012 09:09:47 +0300 Subject: [PATCH] OMAPDSS: Fix SDI PLL locking Commit f476ae9dab3234532d41d36beb4ba7be838fa786 (OMAPDSS: APPLY: Remove DISPC writes to manager's lcd parameters in interface) broke the SDI output, as it causes the SDI PLL locking to fail. LCLK and PCLK divisors are located in shadow registers, and we normally write them to DISPC registers when enabling the output. However, SDI uses pck-free as source clock for its PLL, and pck-free is affected by the divisors. And as we need the PLL before enabling the output, we need to write the divisors early. It seems just writing to the DISPC register is enough, and we don't need to care about the shadow register mechanism for pck-free. The exact reason for this is unknown. Signed-off-by: Tomi Valkeinen Reported-by: Aaro Koskinen Signed-off-by: Florian Tobias Schandinat --- drivers/video/omap2/dss/sdi.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+) diff --git a/drivers/video/omap2/dss/sdi.c b/drivers/video/omap2/dss/sdi.c index 5d31699fbd3c..f43bfe17b3b6 100644 --- a/drivers/video/omap2/dss/sdi.c +++ b/drivers/video/omap2/dss/sdi.c @@ -105,6 +105,20 @@ int omapdss_sdi_display_enable(struct omap_dss_device *dssdev) sdi_config_lcd_manager(dssdev); + /* + * LCLK and PCLK divisors are located in shadow registers, and we + * normally write them to DISPC registers when enabling the output. + * However, SDI uses pck-free as source clock for its PLL, and pck-free + * is affected by the divisors. And as we need the PLL before enabling + * the output, we need to write the divisors early. + * + * It seems just writing to the DISPC register is enough, and we don't + * need to care about the shadow register mechanism for pck-free. The + * exact reason for this is unknown. + */ + dispc_mgr_set_clock_div(dssdev->manager->id, + &sdi.mgr_config.clock_info); + dss_sdi_init(dssdev->phy.sdi.datapairs); r = dss_sdi_enable(); if (r) -- 2.20.1