From 35997ff0cadda701711416abf6676b77358b0008 Mon Sep 17 00:00:00 2001 From: Sebastian Hahn Date: Wed, 5 Dec 2012 21:40:18 +0100 Subject: [PATCH] staging/rtl8192u: cleanfile run Run cleanfile on all files inside drivers/staging/rtl819u Signed-off-by: Sebastian Hahn Signed-off-by: Jennifer Naumann Signed-off-by: Greg Kroah-Hartman --- drivers/staging/rtl8192u/changes | 1 - drivers/staging/rtl8192u/ieee80211/Makefile | 1 - drivers/staging/rtl8192u/ieee80211/aes.c | 3 +- drivers/staging/rtl8192u/ieee80211/arc4.c | 2 +- .../rtl8192u/ieee80211/crypto_compat.h | 2 - drivers/staging/rtl8192u/ieee80211/dot11d.c | 1 - .../staging/rtl8192u/ieee80211/ieee80211.h | 76 +- .../rtl8192u/ieee80211/ieee80211_module.c | 4 +- .../staging/rtl8192u/ieee80211/ieee80211_rx.c | 24 +- .../rtl8192u/ieee80211/ieee80211_softmac.c | 2 +- .../staging/rtl8192u/ieee80211/ieee80211_tx.c | 8 +- drivers/staging/rtl8192u/ieee80211/internal.h | 1 - .../staging/rtl8192u/ieee80211/rtl819x_BA.h | 3 +- .../rtl8192u/ieee80211/rtl819x_BAProc.c | 63 +- .../staging/rtl8192u/ieee80211/rtl819x_HT.h | 13 +- .../rtl8192u/ieee80211/rtl819x_HTProc.c | 124 +- .../staging/rtl8192u/ieee80211/rtl819x_Qos.h | 32 +- .../staging/rtl8192u/ieee80211/rtl819x_TS.h | 3 +- .../rtl8192u/ieee80211/rtl819x_TSProc.c | 18 +- .../staging/rtl8192u/ieee80211/rtl_crypto.h | 9 +- drivers/staging/rtl8192u/r8190_rtl8256.c | 13 +- drivers/staging/rtl8192u/r8192U.h | 74 +- drivers/staging/rtl8192u/r8192U_core.c | 74 +- drivers/staging/rtl8192u/r8192U_dm.c | 161 ++- drivers/staging/rtl8192u/r8192U_dm.h | 15 +- drivers/staging/rtl8192u/r8192U_hw.h | 16 +- drivers/staging/rtl8192u/r8192U_wx.c | 22 +- drivers/staging/rtl8192u/r819xU_HTGen.h | 1 - drivers/staging/rtl8192u/r819xU_HTType.h | 9 +- drivers/staging/rtl8192u/r819xU_cmdpkt.c | 38 +- drivers/staging/rtl8192u/r819xU_cmdpkt.h | 26 +- drivers/staging/rtl8192u/r819xU_firmware.c | 13 +- drivers/staging/rtl8192u/r819xU_firmware.h | 1 - drivers/staging/rtl8192u/r819xU_phy.c | 49 +- drivers/staging/rtl8192u/r819xU_phyreg.h | 1044 ++++++++--------- 35 files changed, 963 insertions(+), 983 deletions(-) diff --git a/drivers/staging/rtl8192u/changes b/drivers/staging/rtl8192u/changes index 87c33fdb9526..0485d6eec7b5 100644 --- a/drivers/staging/rtl8192u/changes +++ b/drivers/staging/rtl8192u/changes @@ -2,4 +2,3 @@ v 0.1 First version. This is based on the rtl8180-sa2400 pre-0.22-CVS code.. - diff --git a/drivers/staging/rtl8192u/ieee80211/Makefile b/drivers/staging/rtl8192u/ieee80211/Makefile index 51effd6412ac..b5d0c2eb045b 100644 --- a/drivers/staging/rtl8192u/ieee80211/Makefile +++ b/drivers/staging/rtl8192u/ieee80211/Makefile @@ -25,4 +25,3 @@ obj-m +=ieee80211_crypt-rsl.o obj-m +=ieee80211_crypt_wep-rsl.o obj-m +=ieee80211_crypt_tkip-rsl.o obj-m +=ieee80211_crypt_ccmp-rsl.o - diff --git a/drivers/staging/rtl8192u/ieee80211/aes.c b/drivers/staging/rtl8192u/ieee80211/aes.c index a6bb6c9207d3..abc1023cef65 100644 --- a/drivers/staging/rtl8192u/ieee80211/aes.c +++ b/drivers/staging/rtl8192u/ieee80211/aes.c @@ -443,7 +443,7 @@ static struct crypto_alg aes_alg = { .cipher = { .cia_min_keysize = AES_MIN_KEY_SIZE, .cia_max_keysize = AES_MAX_KEY_SIZE, - .cia_setkey = aes_set_key, + .cia_setkey = aes_set_key, .cia_encrypt = aes_encrypt, .cia_decrypt = aes_decrypt } @@ -466,4 +466,3 @@ module_exit(aes_fini); MODULE_DESCRIPTION("Rijndael (AES) Cipher Algorithm"); MODULE_LICENSE("Dual BSD/GPL"); - diff --git a/drivers/staging/rtl8192u/ieee80211/arc4.c b/drivers/staging/rtl8192u/ieee80211/arc4.c index e3ad8d2f415e..b790e9ad104c 100644 --- a/drivers/staging/rtl8192u/ieee80211/arc4.c +++ b/drivers/staging/rtl8192u/ieee80211/arc4.c @@ -79,7 +79,7 @@ static struct crypto_alg arc4_alg = { .cra_u = { .cipher = { .cia_min_keysize = ARC4_MIN_KEY_SIZE, .cia_max_keysize = ARC4_MAX_KEY_SIZE, - .cia_setkey = arc4_set_key, + .cia_setkey = arc4_set_key, .cia_encrypt = arc4_crypt, .cia_decrypt = arc4_crypt } } }; diff --git a/drivers/staging/rtl8192u/ieee80211/crypto_compat.h b/drivers/staging/rtl8192u/ieee80211/crypto_compat.h index da486588f1c0..2ba374a64178 100644 --- a/drivers/staging/rtl8192u/ieee80211/crypto_compat.h +++ b/drivers/staging/rtl8192u/ieee80211/crypto_compat.h @@ -56,5 +56,3 @@ static inline int crypto_cipher_decrypt(struct crypto_tfm *tfm, } //EXPORT_SYMBOL_GPL(crypto_alloc_tfm); //EXPORT_SYMBOL_GPL(crypto_free_tfm); - - diff --git a/drivers/staging/rtl8192u/ieee80211/dot11d.c b/drivers/staging/rtl8192u/ieee80211/dot11d.c index ce63fc341c6e..f10fd5a93c38 100644 --- a/drivers/staging/rtl8192u/ieee80211/dot11d.c +++ b/drivers/staging/rtl8192u/ieee80211/dot11d.c @@ -218,4 +218,3 @@ EXPORT_SYMBOL(DOT11D_GetMaxTxPwrInDbm); EXPORT_SYMBOL(DOT11D_ScanComplete); EXPORT_SYMBOL(IsLegalChannel); EXPORT_SYMBOL(ToLegalChannel); - diff --git a/drivers/staging/rtl8192u/ieee80211/ieee80211.h b/drivers/staging/rtl8192u/ieee80211/ieee80211.h index 502bfdbcc84b..bb0e4fe39bfe 100644 --- a/drivers/staging/rtl8192u/ieee80211/ieee80211.h +++ b/drivers/staging/rtl8192u/ieee80211/ieee80211.h @@ -64,7 +64,7 @@ #endif #define KEY_TYPE_NA 0x0 -#define KEY_TYPE_WEP40 0x1 +#define KEY_TYPE_WEP40 0x1 #define KEY_TYPE_TKIP 0x2 #define KEY_TYPE_CCMP 0x4 #define KEY_TYPE_WEP104 0x5 @@ -195,21 +195,21 @@ enum _ReasonCode{ auth_not_valid = 0x2, deauth_lv_ss = 0x3, inactivity = 0x4, - ap_overload = 0x5, + ap_overload = 0x5, class2_err = 0x6, class3_err = 0x7, - disas_lv_ss = 0x8, + disas_lv_ss = 0x8, asoc_not_auth = 0x9, //----MIC_CHECK - mic_failure = 0xe, + mic_failure = 0xe, //----END MIC_CHECK // Reason code defined in 802.11i D10.0 p.28. invalid_IE = 0x0d, four_way_tmout = 0x0f, two_way_tmout = 0x10, - IE_dismatch = 0x11, + IE_dismatch = 0x11, invalid_Gcipher = 0x12, invalid_Pcipher = 0x13, invalid_AKMP = 0x14, @@ -222,7 +222,7 @@ enum _ReasonCode{ QoS_unspec = 0x20, // 32 QAP_bandwidth = 0x21, // 33 poor_condition = 0x22, // 34 - no_facility = 0x23, // 35 + no_facility = 0x23, // 35 // Where is 36??? req_declined = 0x25, // 37 invalid_param = 0x26, // 38 @@ -265,7 +265,7 @@ enum _ReasonCode{ #define IEEE_WPAX_USEGROUP 0 #define IEEE_WPAX_WEP40 1 #define IEEE_WPAX_TKIP 2 -#define IEEE_WPAX_WRAP 3 +#define IEEE_WPAX_WRAP 3 #define IEEE_WPAX_CCMP 4 #define IEEE_WPAX_WEP104 5 @@ -289,12 +289,12 @@ enum _ReasonCode{ #define MAX_IE_LEN 0xff // added for kernel conflict -#define ieee80211_crypt_deinit_entries ieee80211_crypt_deinit_entries_rsl -#define ieee80211_crypt_deinit_handler ieee80211_crypt_deinit_handler_rsl -#define ieee80211_crypt_delayed_deinit ieee80211_crypt_delayed_deinit_rsl -#define ieee80211_register_crypto_ops ieee80211_register_crypto_ops_rsl +#define ieee80211_crypt_deinit_entries ieee80211_crypt_deinit_entries_rsl +#define ieee80211_crypt_deinit_handler ieee80211_crypt_deinit_handler_rsl +#define ieee80211_crypt_delayed_deinit ieee80211_crypt_delayed_deinit_rsl +#define ieee80211_register_crypto_ops ieee80211_register_crypto_ops_rsl #define ieee80211_unregister_crypto_ops ieee80211_unregister_crypto_ops_rsl -#define ieee80211_get_crypto_ops ieee80211_get_crypto_ops_rsl +#define ieee80211_get_crypto_ops ieee80211_get_crypto_ops_rsl #define ieee80211_ccmp_null ieee80211_ccmp_null_rsl @@ -302,10 +302,10 @@ enum _ReasonCode{ #define ieee80211_wep_null ieee80211_wep_null_rsl -#define free_ieee80211 free_ieee80211_rsl -#define alloc_ieee80211 alloc_ieee80211_rsl +#define free_ieee80211 free_ieee80211_rsl +#define alloc_ieee80211 alloc_ieee80211_rsl -#define ieee80211_rx ieee80211_rx_rsl +#define ieee80211_rx ieee80211_rx_rsl #define ieee80211_rx_mgt ieee80211_rx_mgt_rsl #define ieee80211_get_beacon ieee80211_get_beacon_rsl @@ -450,7 +450,7 @@ typedef struct ieee_param { /* management */ #define IEEE80211_STYPE_ASSOC_REQ 0x0000 -#define IEEE80211_STYPE_ASSOC_RESP 0x0010 +#define IEEE80211_STYPE_ASSOC_RESP 0x0010 #define IEEE80211_STYPE_REASSOC_REQ 0x0020 #define IEEE80211_STYPE_REASSOC_RESP 0x0030 #define IEEE80211_STYPE_PROBE_REQ 0x0040 @@ -536,7 +536,7 @@ do { if (ieee80211_debug_level & (level)) \ //if you want print DATA buffer related BA, please set ieee80211_debug_level to DATA|BA #define IEEE80211_DEBUG_DATA(level, data, datalen) \ do{ if ((ieee80211_debug_level & (level)) == (level)) \ - { \ + { \ int i; \ u8* pdata = (u8*) data; \ printk(KERN_DEBUG "ieee80211: %s()\n", __FUNCTION__); \ @@ -623,20 +623,20 @@ do { if (ieee80211_debug_level & (level)) \ #define MAX_STR_LEN 64 /* I want to see ASCII 33 to 126 only. Otherwise, I print '?'. Annie, 2005-11-22.*/ #define PRINTABLE(_ch) (_ch>'!' && _ch<'~') -#define IEEE80211_PRINT_STR(_Comp, _TitleString, _Ptr, _Len) \ - if((_Comp) & level) \ +#define IEEE80211_PRINT_STR(_Comp, _TitleString, _Ptr, _Len) \ + if((_Comp) & level) \ { \ int __i; \ - u8 buffer[MAX_STR_LEN]; \ - int length = (_Len\n", _Len, buffer); \ } @@ -785,12 +785,12 @@ enum ieee80211_reasoncode { #define IEEE80211_24GHZ_BAND (1<<0) #define IEEE80211_52GHZ_BAND (1<<1) -#define IEEE80211_CCK_RATE_LEN 4 +#define IEEE80211_CCK_RATE_LEN 4 #define IEEE80211_CCK_RATE_1MB 0x02 #define IEEE80211_CCK_RATE_2MB 0x04 #define IEEE80211_CCK_RATE_5MB 0x0B #define IEEE80211_CCK_RATE_11MB 0x16 -#define IEEE80211_OFDM_RATE_LEN 8 +#define IEEE80211_OFDM_RATE_LEN 8 #define IEEE80211_OFDM_RATE_6MB 0x0C #define IEEE80211_OFDM_RATE_9MB 0x12 #define IEEE80211_OFDM_RATE_12MB 0x18 @@ -919,10 +919,10 @@ struct ieee80211_rx_stats { u16 fraglength; // FragLength should equal to PacketLength in non-fragment case u16 fragoffset; // Data offset for this fragment u16 ntotalfrag; - bool bisrxaggrsubframe; + bool bisrxaggrsubframe; bool bPacketBeacon; //cosa add for rssi bool bToSelfBA; //cosa add for rssi - char cck_adc_pwdb[4]; //cosa add for rx path selection + char cck_adc_pwdb[4]; //cosa add for rx path selection u16 Seq_Num; }; @@ -992,7 +992,7 @@ struct ieee80211_device; #define SEC_ALG_TKIP 2 #define SEC_ALG_CCMP 3 -#define WEP_KEYS 4 +#define WEP_KEYS 4 #define WEP_KEY_LEN 13 #define SCM_KEY_LEN 32 #define SCM_TEMPORAL_KEY_LENGTH 16 @@ -1205,7 +1205,7 @@ struct ieee80211_drv_agg_txb { struct sk_buff *tx_agg_frames[MAX_TX_AGG_COUNT]; }__attribute__((packed)); -#define MAX_SUBFRAME_COUNT 64 +#define MAX_SUBFRAME_COUNT 64 struct ieee80211_rxb { u8 nr_subframes; struct sk_buff *subframes[MAX_SUBFRAME_COUNT]; @@ -1534,7 +1534,7 @@ struct ieee80211_network { bool bWithAironetIE; bool bCkipSupported; bool bCcxRmEnable; - u16 CcxRmState[2]; + u16 CcxRmState[2]; // CCXv4 S59, MBSSID. bool bMBssidValid; u8 MBssidMask; @@ -1726,7 +1726,7 @@ typedef struct _RT_POWER_SAVE_CONTROL bool bIPSModeBackup; bool bSwRfProcessing; RT_RF_POWER_STATE eInactivePowerState; - struct work_struct InactivePsWorkItem; + struct work_struct InactivePsWorkItem; struct timer_list InactivePsTimer; // Return point for join action @@ -1837,11 +1837,11 @@ struct ieee80211_device { u8 HTHighestOperaRate; //wb added for rate operation mode to firmware u8 bTxDisableRateFallBack; - u8 bTxUseDriverAssingedRate; + u8 bTxUseDriverAssingedRate; atomic_t atm_chnlop; atomic_t atm_swbw; // u8 HTHighestOperaRate; -// u8 HTCurrentOperaRate; +// u8 HTCurrentOperaRate; // 802.11e and WMM Traffic Stream Info (TX) struct list_head Tx_TS_Admit_List; @@ -2055,9 +2055,9 @@ struct ieee80211_device { bool bdynamic_txpower_enable; bool bCTSToSelfEnable; - u8 CTSToSelfTH; + u8 CTSToSelfTH; - u32 fsync_time_interval; + u32 fsync_time_interval; u32 fsync_rate_bitmap; u8 fsync_rssi_threshold; bool bfsync_enable; @@ -2214,7 +2214,7 @@ struct ieee80211_device { #define IEEE_A (1<<0) #define IEEE_B (1<<1) #define IEEE_G (1<<2) -#define IEEE_N_24G (1<<4) +#define IEEE_N_24G (1<<4) #define IEEE_N_5G (1<<5) #define IEEE_MODE_MASK (IEEE_A|IEEE_B|IEEE_G) diff --git a/drivers/staging/rtl8192u/ieee80211/ieee80211_module.c b/drivers/staging/rtl8192u/ieee80211/ieee80211_module.c index 82d4bf6a86a5..c673adc1be97 100644 --- a/drivers/staging/rtl8192u/ieee80211/ieee80211_module.c +++ b/drivers/staging/rtl8192u/ieee80211/ieee80211_module.c @@ -233,9 +233,9 @@ static int debug = \ // IEEE80211_DL_TX | // IEEE80211_DL_RX | //IEEE80211_DL_QOS | - // IEEE80211_DL_HT | + // IEEE80211_DL_HT | // IEEE80211_DL_TS | -// IEEE80211_DL_BA | +// IEEE80211_DL_BA | // IEEE80211_DL_REORDER| // IEEE80211_DL_TRACE | //IEEE80211_DL_DATA | diff --git a/drivers/staging/rtl8192u/ieee80211/ieee80211_rx.c b/drivers/staging/rtl8192u/ieee80211/ieee80211_rx.c index e3cf7a45b900..8e58647eef39 100644 --- a/drivers/staging/rtl8192u/ieee80211/ieee80211_rx.c +++ b/drivers/staging/rtl8192u/ieee80211/ieee80211_rx.c @@ -608,7 +608,7 @@ void RxReorderIndicatePacket( struct ieee80211_device *ieee, u16 SeqNum) { PRT_HIGH_THROUGHPUT pHTInfo = ieee->pHTInfo; - PRX_REORDER_ENTRY pReorderEntry = NULL; + PRX_REORDER_ENTRY pReorderEntry = NULL; struct ieee80211_rxb* prxbIndicateArray[REORDER_WIN_SIZE]; u8 WinSize = pHTInfo->RxReorderWinSize; u16 WinEnd = (pTS->RxIndicateSeq + WinSize -1)%4096; @@ -1043,7 +1043,7 @@ int ieee80211_rx(struct ieee80211_device *ieee, struct sk_buff *skb, { // IEEE80211_DEBUG(IEEE80211_DL_REORDER,"%s(): pRxTS->RxLastFragNum is %d,frag is %d,pRxTS->RxLastSeqNum is %d,seq is %d\n",__FUNCTION__,pRxTS->RxLastFragNum,frag,pRxTS->RxLastSeqNum,WLAN_GET_SEQ_SEQ(sc)); - if( (fc & (1<<11)) && + if( (fc & (1<<11)) && (frag == pRxTS->RxLastFragNum) && (WLAN_GET_SEQ_SEQ(sc) == pRxTS->RxLastSeqNum) ) { @@ -1839,12 +1839,12 @@ int ieee80211_parse_info_param(struct ieee80211_device *ieee, info_element->data[3] == 0x033){ tmp_htcap_len = min(info_element->len,(u8)MAX_IE_LEN); - if(tmp_htcap_len != 0){ - network->bssht.bdHTSpecVer = HT_SPEC_VER_EWC; + if(tmp_htcap_len != 0){ + network->bssht.bdHTSpecVer = HT_SPEC_VER_EWC; network->bssht.bdHTCapLen = tmp_htcap_len > sizeof(network->bssht.bdHTCapBuf)?\ sizeof(network->bssht.bdHTCapBuf):tmp_htcap_len; memcpy(network->bssht.bdHTCapBuf,info_element->data,network->bssht.bdHTCapLen); - } + } } if(tmp_htcap_len != 0) network->bssht.bdSupportHT = true; @@ -1856,9 +1856,9 @@ int ieee80211_parse_info_param(struct ieee80211_device *ieee, if(tmp_htinfo_len == 0){ if(info_element->len >= 4 && info_element->data[0] == 0x00 && - info_element->data[1] == 0x90 && - info_element->data[2] == 0x4c && - info_element->data[3] == 0x034){ + info_element->data[1] == 0x90 && + info_element->data[2] == 0x4c && + info_element->data[3] == 0x034){ tmp_htinfo_len = min(info_element->len,(u8)MAX_IE_LEN); if(tmp_htinfo_len != 0){ @@ -2060,7 +2060,7 @@ int ieee80211_parse_info_param(struct ieee80211_device *ieee, if( (info_element->data[IE_CISCO_FLAG_POSITION]&SUPPORT_CKIP_MIC) || (info_element->data[IE_CISCO_FLAG_POSITION]&SUPPORT_CKIP_PK) ) { - network->bCkipSupported = true; + network->bCkipSupported = true; } else { @@ -2070,7 +2070,7 @@ int ieee80211_parse_info_param(struct ieee80211_device *ieee, else { network->bWithAironetIE = false; - network->bCkipSupported = false; + network->bCkipSupported = false; } break; case MFIE_TYPE_QOS_PARAMETER: @@ -2230,8 +2230,8 @@ static inline int ieee80211_network_init( } else network->flags |= NETWORK_HAS_CCK; - network->wpa_ie_len = 0; - network->rsn_ie_len = 0; + network->wpa_ie_len = 0; + network->rsn_ie_len = 0; if (ieee80211_parse_info_param (ieee,beacon->info_element, stats->len - sizeof(*beacon), network, stats)) diff --git a/drivers/staging/rtl8192u/ieee80211/ieee80211_softmac.c b/drivers/staging/rtl8192u/ieee80211/ieee80211_softmac.c index 7a0707810fd0..2c2bd00af48a 100644 --- a/drivers/staging/rtl8192u/ieee80211/ieee80211_softmac.c +++ b/drivers/staging/rtl8192u/ieee80211/ieee80211_softmac.c @@ -3124,7 +3124,7 @@ inline struct sk_buff *ieee80211_disassociate_skb( void SendDisassociation( struct ieee80211_device *ieee, - u8* asSta, + u8* asSta, u8 asRsn ) { diff --git a/drivers/staging/rtl8192u/ieee80211/ieee80211_tx.c b/drivers/staging/rtl8192u/ieee80211/ieee80211_tx.c index 3f5ceeb88b6c..918dee7ca5bd 100644 --- a/drivers/staging/rtl8192u/ieee80211/ieee80211_tx.c +++ b/drivers/staging/rtl8192u/ieee80211/ieee80211_tx.c @@ -395,7 +395,7 @@ ieee80211_query_HTCapShortGI(struct ieee80211_device *ieee, cb_desc *tcb_desc) { PRT_HIGH_THROUGHPUT pHTInfo = ieee->pHTInfo; - tcb_desc->bUseShortGI = false; + tcb_desc->bUseShortGI = false; if(!pHTInfo->bCurrentHTSupport||!pHTInfo->bEnableHT) return; @@ -514,7 +514,7 @@ void ieee80211_query_protectionmode(struct ieee80211_device* ieee, cb_desc* tcb_ if(pHTInfo->IOTAction & HT_IOT_ACT_FORCED_CTS2SELF) { tcb_desc->bCTSEnable = true; - tcb_desc->rts_rate = MGN_24M; + tcb_desc->rts_rate = MGN_24M; tcb_desc->bRTSEnable = true; break; } @@ -527,7 +527,7 @@ void ieee80211_query_protectionmode(struct ieee80211_device* ieee, cb_desc* tcb_ { tcb_desc->bCTSEnable = true; tcb_desc->rts_rate = MGN_24M; - tcb_desc->bRTSEnable = true; + tcb_desc->bRTSEnable = true; } if (ieee->current_network.capability & WLAN_CAPABILITY_SHORT_PREAMBLE) tcb_desc->bUseShortPreamble = true; @@ -833,7 +833,7 @@ int ieee80211_xmit(struct sk_buff *skb, struct net_device *dev) else ieee->seq_ctrl[UP2AC(skb->priority) + 1]++; } else { - if (ieee->seq_ctrl[0] == 0xFFF) + if (ieee->seq_ctrl[0] == 0xFFF) ieee->seq_ctrl[0] = 0; else ieee->seq_ctrl[0]++; diff --git a/drivers/staging/rtl8192u/ieee80211/internal.h b/drivers/staging/rtl8192u/ieee80211/internal.h index bebe13ac53b7..6f54cfe8a467 100644 --- a/drivers/staging/rtl8192u/ieee80211/internal.h +++ b/drivers/staging/rtl8192u/ieee80211/internal.h @@ -79,4 +79,3 @@ void crypto_exit_cipher_ops(struct crypto_tfm *tfm); void crypto_exit_compress_ops(struct crypto_tfm *tfm); #endif /* _CRYPTO_INTERNAL_H */ - diff --git a/drivers/staging/rtl8192u/ieee80211/rtl819x_BA.h b/drivers/staging/rtl8192u/ieee80211/rtl819x_BA.h index 8ddc8bf9dc26..ffd1c0cd0a7e 100644 --- a/drivers/staging/rtl8192u/ieee80211/rtl819x_BA.h +++ b/drivers/staging/rtl8192u/ieee80211/rtl819x_BA.h @@ -1,7 +1,7 @@ #ifndef _BATYPE_H_ #define _BATYPE_H_ -#define TOTAL_TXBA_NUM 16 +#define TOTAL_TXBA_NUM 16 #define TOTAL_RXBA_NUM 16 #define BA_SETUP_TIMEOUT 200 @@ -66,4 +66,3 @@ typedef struct _BA_RECORD { } BA_RECORD, *PBA_RECORD; #endif //end _BATYPE_H_ - diff --git a/drivers/staging/rtl8192u/ieee80211/rtl819x_BAProc.c b/drivers/staging/rtl8192u/ieee80211/rtl819x_BAProc.c index 1ebea3daea2d..69735d320315 100644 --- a/drivers/staging/rtl8192u/ieee80211/rtl819x_BAProc.c +++ b/drivers/staging/rtl8192u/ieee80211/rtl819x_BAProc.c @@ -9,8 +9,8 @@ /******************************************************************************************************************** *function: Activate BA entry. And if Time is nozero, start timer. - * input: PBA_RECORD pBA //BA entry to be enabled - * u16 Time //indicate time delay. + * input: PBA_RECORD pBA //BA entry to be enabled + * u16 Time //indicate time delay. * output: none ********************************************************************************************************************/ void ActivateBAEntry(struct ieee80211_device* ieee, PBA_RECORD pBA, u16 Time) @@ -22,7 +22,7 @@ void ActivateBAEntry(struct ieee80211_device* ieee, PBA_RECORD pBA, u16 Time) /******************************************************************************************************************** *function: deactivate BA entry, including its timer. - * input: PBA_RECORD pBA //BA entry to be disabled + * input: PBA_RECORD pBA //BA entry to be disabled * output: none ********************************************************************************************************************/ void DeActivateBAEntry( struct ieee80211_device* ieee, PBA_RECORD pBA) @@ -33,7 +33,7 @@ void DeActivateBAEntry( struct ieee80211_device* ieee, PBA_RECORD pBA) /******************************************************************************************************************** *function: deactivete BA entry in Tx Ts, and send DELBA. * input: - * PTX_TS_RECORD pTxTs //Tx Ts which is to deactivate BA entry. + * PTX_TS_RECORD pTxTs //Tx Ts which is to deactivate BA entry. * output: none * notice: As PTX_TS_RECORD structure will be defined in QOS, so wait to be merged. //FIXME ********************************************************************************************************************/ @@ -63,7 +63,7 @@ u8 TxTsDeleteBA( struct ieee80211_device* ieee, PTX_TS_RECORD pTxTs) /******************************************************************************************************************** *function: deactivete BA entry in Tx Ts, and send DELBA. * input: - * PRX_TS_RECORD pRxTs //Rx Ts which is to deactivate BA entry. + * PRX_TS_RECORD pRxTs //Rx Ts which is to deactivate BA entry. * output: none * notice: As PRX_TS_RECORD structure will be defined in QOS, so wait to be merged. //FIXME, same with above ********************************************************************************************************************/ @@ -84,7 +84,7 @@ u8 RxTsDeleteBA( struct ieee80211_device* ieee, PRX_TS_RECORD pRxTs) /******************************************************************************************************************** *function: reset BA entry * input: - * PBA_RECORD pBA //entry to be reset + * PBA_RECORD pBA //entry to be reset * output: none ********************************************************************************************************************/ void ResetBaEntry( PBA_RECORD pBA) @@ -98,12 +98,12 @@ void ResetBaEntry( PBA_RECORD pBA) //These functions need porting here or not? /******************************************************************************************************************************* *function: construct ADDBAREQ and ADDBARSP frame here together. - * input: u8* Dst //ADDBA frame's destination - * PBA_RECORD pBA //BA_RECORD entry which stores the necessary information for BA. - * u16 StatusCode //status code in RSP and I will use it to indicate whether it's RSP or REQ(will I?) - * u8 type //indicate whether it's RSP(ACT_ADDBARSP) ow REQ(ACT_ADDBAREQ) + * input: u8* Dst //ADDBA frame's destination + * PBA_RECORD pBA //BA_RECORD entry which stores the necessary information for BA. + * u16 StatusCode //status code in RSP and I will use it to indicate whether it's RSP or REQ(will I?) + * u8 type //indicate whether it's RSP(ACT_ADDBARSP) ow REQ(ACT_ADDBAREQ) * output: none - * return: sk_buff* skb //return constructed skb to xmit + * return: sk_buff* skb //return constructed skb to xmit *******************************************************************************************************************************/ static struct sk_buff* ieee80211_ADDBA(struct ieee80211_device* ieee, u8* Dst, PBA_RECORD pBA, u16 StatusCode, u8 type) { @@ -126,7 +126,7 @@ static struct sk_buff* ieee80211_ADDBA(struct ieee80211_device* ieee, u8* Dst, P return NULL; } - memset(skb->data, 0, sizeof( struct ieee80211_hdr_3addr)); //I wonder whether it's necessary. Apparently kernel will not do it when alloc a skb. + memset(skb->data, 0, sizeof( struct ieee80211_hdr_3addr)); //I wonder whether it's necessary. Apparently kernel will not do it when alloc a skb. skb_reserve(skb, ieee->tx_headroom); BAReq = ( struct ieee80211_hdr_3addr *) skb_put(skb,sizeof( struct ieee80211_hdr_3addr)); @@ -177,12 +177,12 @@ static struct sk_buff* ieee80211_ADDBA(struct ieee80211_device* ieee, u8* Dst, P /******************************************************************************************************************** *function: construct DELBA frame - * input: u8* dst //DELBA frame's destination - * PBA_RECORD pBA //BA_RECORD entry which stores the necessary information for BA - * TR_SELECT TxRxSelect //TX RX direction - * u16 ReasonCode //status code. + * input: u8* dst //DELBA frame's destination + * PBA_RECORD pBA //BA_RECORD entry which stores the necessary information for BA + * TR_SELECT TxRxSelect //TX RX direction + * u16 ReasonCode //status code. * output: none - * return: sk_buff* skb //return constructed skb to xmit + * return: sk_buff* skb //return constructed skb to xmit ********************************************************************************************************************/ static struct sk_buff* ieee80211_DELBA( struct ieee80211_device* ieee, @@ -246,8 +246,8 @@ static struct sk_buff* ieee80211_DELBA( /******************************************************************************************************************** *function: send ADDBAReq frame out - * input: u8* dst //ADDBAReq frame's destination - * PBA_RECORD pBA //BA_RECORD entry which stores the necessary information for BA + * input: u8* dst //ADDBAReq frame's destination + * PBA_RECORD pBA //BA_RECORD entry which stores the necessary information for BA * output: none * notice: If any possible, please hide pBA in ieee. And temporarily use Manage Queue as softmac_mgmt_xmit() usually does ********************************************************************************************************************/ @@ -272,9 +272,9 @@ void ieee80211_send_ADDBAReq(struct ieee80211_device* ieee, u8* dst, PBA_RECORD /******************************************************************************************************************** *function: send ADDBARSP frame out - * input: u8* dst //DELBA frame's destination - * PBA_RECORD pBA //BA_RECORD entry which stores the necessary information for BA - * u16 StatusCode //RSP StatusCode + * input: u8* dst //DELBA frame's destination + * PBA_RECORD pBA //BA_RECORD entry which stores the necessary information for BA + * u16 StatusCode //RSP StatusCode * output: none * notice: If any possible, please hide pBA in ieee. And temporarily use Manage Queue as softmac_mgmt_xmit() usually does ********************************************************************************************************************/ @@ -297,10 +297,10 @@ void ieee80211_send_ADDBARsp(struct ieee80211_device* ieee, u8* dst, PBA_RECORD } /******************************************************************************************************************** *function: send ADDBARSP frame out - * input: u8* dst //DELBA frame's destination - * PBA_RECORD pBA //BA_RECORD entry which stores the necessary information for BA - * TR_SELECT TxRxSelect //TX or RX - * u16 ReasonCode //DEL ReasonCode + * input: u8* dst //DELBA frame's destination + * PBA_RECORD pBA //BA_RECORD entry which stores the necessary information for BA + * TR_SELECT TxRxSelect //TX or RX + * u16 ReasonCode //DEL ReasonCode * output: none * notice: If any possible, please hide pBA in ieee. And temporarily use Manage Queue as softmac_mgmt_xmit() usually does ********************************************************************************************************************/ @@ -340,7 +340,7 @@ int ieee80211_rx_ADDBAReq( struct ieee80211_device* ieee, struct sk_buff *skb) if (skb->len < sizeof( struct ieee80211_hdr_3addr) + 9) { - IEEE80211_DEBUG(IEEE80211_DL_ERR, " Invalid skb len in BAREQ(%d / %zu)\n", skb->len, (sizeof( struct ieee80211_hdr_3addr) + 9)); + IEEE80211_DEBUG(IEEE80211_DL_ERR, " Invalid skb len in BAREQ(%d / %zu)\n", skb->len, (sizeof( struct ieee80211_hdr_3addr) + 9)); return -1; } @@ -439,7 +439,7 @@ int ieee80211_rx_ADDBARsp( struct ieee80211_device* ieee, struct sk_buff *skb) if (skb->len < sizeof( struct ieee80211_hdr_3addr) + 9) { - IEEE80211_DEBUG(IEEE80211_DL_ERR, " Invalid skb len in BARSP(%d / %zu)\n", skb->len, (sizeof( struct ieee80211_hdr_3addr) + 9)); + IEEE80211_DEBUG(IEEE80211_DL_ERR, " Invalid skb len in BARSP(%d / %zu)\n", skb->len, (sizeof( struct ieee80211_hdr_3addr) + 9)); return -1; } rsp = ( struct ieee80211_hdr_3addr*)skb->data; @@ -569,7 +569,7 @@ int ieee80211_rx_DELBA(struct ieee80211_device* ieee,struct sk_buff *skb) if (skb->len < sizeof( struct ieee80211_hdr_3addr) + 6) { - IEEE80211_DEBUG(IEEE80211_DL_ERR, " Invalid skb len in DELBA(%d / %zu)\n", skb->len, (sizeof( struct ieee80211_hdr_3addr) + 6)); + IEEE80211_DEBUG(IEEE80211_DL_ERR, " Invalid skb len in DELBA(%d / %zu)\n", skb->len, (sizeof( struct ieee80211_hdr_3addr) + 6)); return -1; } @@ -589,7 +589,7 @@ int ieee80211_rx_DELBA(struct ieee80211_device* ieee,struct sk_buff *skb) if(pDelBaParamSet->field.Initiator == 1) { - PRX_TS_RECORD pRxTs; + PRX_TS_RECORD pRxTs; if( !GetTs( ieee, @@ -657,7 +657,7 @@ TsInitAddBA( // BufferSize: This need to be set according to A-MPDU vector pBA->BaParamSet.field.BufferSize = 32; // BufferSize: This need to be set according to A-MPDU vector pBA->BaTimeoutValue = 0; // Timeout value: Set 0 to disable Timer - pBA->BaStartSeqCtrl.field.SeqNum = (pTS->TxCurSeq + 3) % 4096; // Block Ack will start after 3 packets later. + pBA->BaStartSeqCtrl.field.SeqNum = (pTS->TxCurSeq + 3) % 4096; // Block Ack will start after 3 packets later. ActivateBAEntry(ieee, pBA, BA_SETUP_TIMEOUT); @@ -734,4 +734,3 @@ void RxBaInactTimeout(unsigned long data) DELBA_REASON_TIMEOUT); return ; } - diff --git a/drivers/staging/rtl8192u/ieee80211/rtl819x_HT.h b/drivers/staging/rtl8192u/ieee80211/rtl819x_HT.h index a60b39cdb472..2b8283534be4 100644 --- a/drivers/staging/rtl8192u/ieee80211/rtl819x_HT.h +++ b/drivers/staging/rtl8192u/ieee80211/rtl819x_HT.h @@ -121,7 +121,7 @@ typedef union _HT_CAPABILITY_MACPARA{ typedef enum _HT_ACTION{ ACT_RECOMMAND_WIDTH = 0, - ACT_MIMO_PWR_SAVE = 1, + ACT_MIMO_PWR_SAVE = 1, ACT_PSMP = 2, ACT_SET_PCO_PHASE = 3, ACT_MIMO_CHL_MEASURE = 4, @@ -398,9 +398,9 @@ typedef struct _BSS_HT{ typedef struct _MIMO_RSSI{ u32 EnableAntenna; u32 AntennaA; - u32 AntennaB; - u32 AntennaC; - u32 AntennaD; + u32 AntennaB; + u32 AntennaC; + u32 AntennaD; u32 Average; }MIMO_RSSI, *PMIMO_RSSI; @@ -436,11 +436,11 @@ extern u8 MCS_FILTER_1SS[16]; // MCS Bw 40 {1~7, 12~15,32} -#define RATE_ADPT_1SS_MASK 0xFF +#define RATE_ADPT_1SS_MASK 0xFF #define RATE_ADPT_2SS_MASK 0xF0 //Skip MCS8~11 because mcs7 > mcs6, 9, 10, 11. 2007.01.16 by Emily #define RATE_ADPT_MCS32_MASK 0x01 -#define IS_11N_MCS_RATE(rate) (rate&0x80) +#define IS_11N_MCS_RATE(rate) (rate&0x80) typedef enum _HT_AGGRE_SIZE{ HT_AGG_SIZE_8K = 0, @@ -478,4 +478,3 @@ typedef enum _HT_IOT_ACTION{ }HT_IOT_ACTION_E, *PHT_IOT_ACTION_E; #endif //_RTL819XU_HTTYPE_H_ - diff --git a/drivers/staging/rtl8192u/ieee80211/rtl819x_HTProc.c b/drivers/staging/rtl8192u/ieee80211/rtl819x_HTProc.c index ebb523904edc..268b270e9495 100644 --- a/drivers/staging/rtl8192u/ieee80211/rtl819x_HTProc.c +++ b/drivers/staging/rtl8192u/ieee80211/rtl819x_HTProc.c @@ -21,7 +21,7 @@ u16 MCS_DATA_RATE[2][2][77] = 81, 162, 243, 324, 486, 648, 729, 810, 108, 216, 324, 432, 648, 864, 972, 1080, 12, 162, 216, 270, 243, 324, 405, 216, 270, 270, 324, 378, 378, 432, 324, 405, 405, 486, 567, 567, 648, 270, 324, 378, 324, 378, 432, 486, 432, 486, 540, 540, - 594, 405, 486, 567, 486, 567, 648, 729, 648, 729, 810, 810, 891}, // Long GI, 40MHz + 594, 405, 486, 567, 486, 567, 648, 729, 648, 729, 810, 810, 891}, // Long GI, 40MHz {30, 60, 90, 120, 180, 240, 270, 300, 60, 120, 180, 240, 360, 480, 540, 600, 90, 180, 270, 360, 540, 720, 810, 900, 120, 240, 360, 480, 720, 960, 1080, 1200, 13, 180, 240, 300, 270, 360, 450, 240, 300, 300, 360, 420, 420, 480, 360, 450, @@ -88,7 +88,7 @@ void HTUpdateDefaultSetting(struct ieee80211_device* ieee) ieee->bTxDisableRateFallBack = 0; ieee->bTxUseDriverAssingedRate = 0; -#ifdef TO_DO_LIST +#ifdef TO_DO_LIST // 8190 only. Assign duration operation mode to firmware pMgntInfo->bTxEnableFwCalcDur = (BOOLEAN)pNdisCommon->bRegTxEnableFwCalcDur; #endif @@ -116,7 +116,7 @@ void HTUpdateDefaultSetting(struct ieee80211_device* ieee) /******************************************************************************************************************** *function: This function print out each field on HT capability IE mainly from (Beacon/ProbeRsp/AssocReq) * input: u8* CapIE //Capability IE to be printed out - * u8* TitleString //mainly print out caller function + * u8* TitleString //mainly print out caller function * output: none * return: none * notice: Driver should not print out this message by default. @@ -125,7 +125,7 @@ void HTDebugHTCapability(u8* CapIE, u8* TitleString ) { static u8 EWC11NHTCap[] = {0x00, 0x90, 0x4c, 0x33}; // For 11n EWC definition, 2007.07.17, by Emily - PHT_CAPABILITY_ELE pCapELE; + PHT_CAPABILITY_ELE pCapELE; if(!memcmp(CapIE, EWC11NHTCap, sizeof(EWC11NHTCap))) { @@ -153,7 +153,7 @@ void HTDebugHTCapability(u8* CapIE, u8* TitleString ) /******************************************************************************************************************** *function: This function print out each field on HT Information IE mainly from (Beacon/ProbeRsp) * input: u8* InfoIE //Capability IE to be printed out - * u8* TitleString //mainly print out caller function + * u8* TitleString //mainly print out caller function * output: none * return: none * notice: Driver should not print out this message by default. @@ -217,7 +217,7 @@ void HTDebugHTInfo(u8* InfoIE, u8* TitleString) } /* -* Return: true if station in half n mode and AP supports 40 bw +* Return: true if station in half n mode and AP supports 40 bw */ bool IsHTHalfNmode40Bandwidth(struct ieee80211_device* ieee) { @@ -228,7 +228,7 @@ bool IsHTHalfNmode40Bandwidth(struct ieee80211_device* ieee) retValue = false; else if(pHTInfo->bRegBW40MHz == false) // station supports 40 bw retValue = false; - else if(!ieee->GetHalfNmodeSupportByAPsHandler(ieee->dev)) // station in half n mode + else if(!ieee->GetHalfNmodeSupportByAPsHandler(ieee->dev)) // station in half n mode retValue = false; else if(((PHT_CAPABILITY_ELE)(pHTInfo->PeerHTCapBuf))->ChlWidth) // ap support 40 bw retValue = true; @@ -245,7 +245,7 @@ bool IsHTHalfNmodeSGI(struct ieee80211_device* ieee, bool is40MHz) if(pHTInfo->bCurrentHTSupport == false ) // wireless is n mode retValue = false; - else if(!ieee->GetHalfNmodeSupportByAPsHandler(ieee->dev)) // station in half n mode + else if(!ieee->GetHalfNmodeSupportByAPsHandler(ieee->dev)) // station in half n mode retValue = false; else if(is40MHz) // ap support 40 bw { @@ -265,7 +265,7 @@ bool IsHTHalfNmodeSGI(struct ieee80211_device* ieee, bool is40MHz) return retValue; } -u16 HTHalfMcsToDataRate(struct ieee80211_device* ieee, u8 nMcsRate) +u16 HTHalfMcsToDataRate(struct ieee80211_device* ieee, u8 nMcsRate) { u8 is40MHz; @@ -291,8 +291,8 @@ u16 HTMcsToDataRate( struct ieee80211_device* ieee, u8 nMcsRate) /******************************************************************************************************************** *function: This function returns current datarate. - * input: struct ieee80211_device* ieee - * u8 nDataRate + * input: struct ieee80211_device* ieee + * u8 nDataRate * output: none * return: tx rate * notice: quite unsure about how to use this function //wb @@ -371,7 +371,7 @@ bool IsHTHalfNmodeAPs(struct ieee80211_device* ieee) /******************************************************************************************************************** *function: This function returns peer IOT. - * input: struct ieee80211_device* ieee + * input: struct ieee80211_device* ieee * output: none * return: * notice: @@ -408,8 +408,8 @@ void HTIOTPeerDetermine(struct ieee80211_device* ieee) /******************************************************************************************************************** *function: Check whether driver should declare received rate up to MCS13 only since some chipset is not good * at receiving MCS14~15 frame from some AP. - * input: struct ieee80211_device* ieee - * u8 * PeerMacAddr + * input: struct ieee80211_device* ieee + * u8 * PeerMacAddr * output: none * return: return 1 if driver should declare MCS13 only(otherwise return 0) * *****************************************************************************************************************/ @@ -429,7 +429,7 @@ u8 HTIOTActIsDisableMCS14(struct ieee80211_device* ieee, u8* PeerMacAddr) * PADAPTER Adapter, * * Output: None -* Return: true if driver should disable MCS15 +* Return: true if driver should disable MCS15 * 2008.04.15 Emily */ bool HTIOTActIsDisableMCS15(struct ieee80211_device* ieee) @@ -466,7 +466,7 @@ bool HTIOTActIsDisableMCS15(struct ieee80211_device* ieee) * PADAPTER Adapter, * * Output: None -* Return: true if driver should disable all two spatial stream packet +* Return: true if driver should disable all two spatial stream packet * 2008.04.21 Emily */ bool HTIOTActIsDisableMCSTwoSpatialStream(struct ieee80211_device* ieee, u8 *PeerMacAddr) @@ -481,12 +481,12 @@ bool HTIOTActIsDisableMCSTwoSpatialStream(struct ieee80211_device* ieee, u8 *Pee /******************************************************************************************************************** *function: Check whether driver should disable EDCA turbo mode - * input: struct ieee80211_device* ieee - * u8* PeerMacAddr + * input: struct ieee80211_device* ieee + * u8* PeerMacAddr * output: none * return: return 1 if driver should disable EDCA turbo mode(otherwise return 0) * *****************************************************************************************************************/ -u8 HTIOTActIsDisableEDCATurbo(struct ieee80211_device* ieee, u8* PeerMacAddr) +u8 HTIOTActIsDisableEDCATurbo(struct ieee80211_device* ieee, u8* PeerMacAddr) { u8 retValue = false; // default enable EDCA Turbo mode. // Set specific EDCA parameter for different AP in DM handler. @@ -539,10 +539,10 @@ void HTResetIOTSetting( /******************************************************************************************************************** *function: Construct Capablility Element in Beacon... if HTEnable is turned on - * input: struct ieee80211_device* ieee - * u8* posHTCap //pointer to store Capability Ele - * u8* len //store length of CE - * u8 IsEncrypt //whether encrypt, needed further + * input: struct ieee80211_device* ieee + * u8* posHTCap //pointer to store Capability Ele + * u8* len //store length of CE + * u8 IsEncrypt //whether encrypt, needed further * output: none * return: none * notice: posHTCap can't be null and should be initialized before. @@ -550,7 +550,7 @@ void HTResetIOTSetting( void HTConstructCapabilityElement(struct ieee80211_device* ieee, u8* posHTCap, u8* len, u8 IsEncrypt) { PRT_HIGH_THROUGHPUT pHT = ieee->pHTInfo; - PHT_CAPABILITY_ELE pCapELE = NULL; + PHT_CAPABILITY_ELE pCapELE = NULL; //u8 bIsDeclareMCS13; if ((posHTCap == NULL) || (pHT == NULL)) @@ -571,7 +571,7 @@ void HTConstructCapabilityElement(struct ieee80211_device* ieee, u8* posHTCap, u //HT capability info - pCapELE->AdvCoding = 0; // This feature is not supported now!! + pCapELE->AdvCoding = 0; // This feature is not supported now!! if(ieee->GetHalfNmodeSupportByAPsHandler(ieee->dev)) { pCapELE->ChlWidth = 0; @@ -581,18 +581,18 @@ void HTConstructCapabilityElement(struct ieee80211_device* ieee, u8* posHTCap, u pCapELE->ChlWidth = (pHT->bRegBW40MHz?1:0); } -// pCapELE->ChlWidth = (pHT->bRegBW40MHz?1:0); - pCapELE->MimoPwrSave = pHT->SelfMimoPs; +// pCapELE->ChlWidth = (pHT->bRegBW40MHz?1:0); + pCapELE->MimoPwrSave = pHT->SelfMimoPs; pCapELE->GreenField = 0; // This feature is not supported now!! pCapELE->ShortGI20Mhz = 1; // We can receive Short GI!! pCapELE->ShortGI40Mhz = 1; // We can receive Short GI!! //DbgPrint("TX HT cap/info ele BW=%d SG20=%d SG40=%d\n\r", //pCapELE->ChlWidth, pCapELE->ShortGI20Mhz, pCapELE->ShortGI40Mhz); - pCapELE->TxSTBC = 1; - pCapELE->RxSTBC = 0; + pCapELE->TxSTBC = 1; + pCapELE->RxSTBC = 0; pCapELE->DelayBA = 0; // Do not support now!! pCapELE->MaxAMSDUSize = (MAX_RECEIVE_BUFFER_SIZE>=7935)?1:0; - pCapELE->DssCCk = ((pHT->bRegBW40MHz)?(pHT->bRegSuppCCK?1:0):0); + pCapELE->DssCCk = ((pHT->bRegBW40MHz)?(pHT->bRegSuppCCK?1:0):0); pCapELE->PSMP = 0; // Do not support now!! pCapELE->LSigTxopProtect = 0; // Do not support now!! @@ -603,13 +603,13 @@ void HTConstructCapabilityElement(struct ieee80211_device* ieee, u8* posHTCap, u if( IsEncrypt) { - pCapELE->MPDUDensity = 7; // 8us - pCapELE->MaxRxAMPDUFactor = 2; // 2 is for 32 K and 3 is 64K + pCapELE->MPDUDensity = 7; // 8us + pCapELE->MaxRxAMPDUFactor = 2; // 2 is for 32 K and 3 is 64K } else { - pCapELE->MaxRxAMPDUFactor = 3; // 2 is for 32 K and 3 is 64K - pCapELE->MPDUDensity = 0; // no density + pCapELE->MaxRxAMPDUFactor = 3; // 2 is for 32 K and 3 is 64K + pCapELE->MPDUDensity = 0; // no density } //Supported MCS set @@ -658,10 +658,10 @@ void HTConstructCapabilityElement(struct ieee80211_device* ieee, u8* posHTCap, u } /******************************************************************************************************************** *function: Construct Information Element in Beacon... if HTEnable is turned on - * input: struct ieee80211_device* ieee - * u8* posHTCap //pointer to store Information Ele - * u8* len //store len of - * u8 IsEncrypt //whether encrypt, needed further + * input: struct ieee80211_device* ieee + * u8* posHTCap //pointer to store Information Ele + * u8* len //store len of + * u8 IsEncrypt //whether encrypt, needed further * output: none * return: none * notice: posHTCap can't be null and be initialized before. only AP and IBSS sta should do this @@ -679,12 +679,12 @@ void HTConstructInfoElement(struct ieee80211_device* ieee, u8* posHTInfo, u8* le memset(posHTInfo, 0, *len); if ( (ieee->iw_mode == IW_MODE_ADHOC) || (ieee->iw_mode == IW_MODE_MASTER)) //ap mode is not currently supported { - pHTInfoEle->ControlChl = ieee->current_network.channel; - pHTInfoEle->ExtChlOffset = ((pHT->bRegBW40MHz == false)?HT_EXTCHNL_OFFSET_NO_EXT: + pHTInfoEle->ControlChl = ieee->current_network.channel; + pHTInfoEle->ExtChlOffset = ((pHT->bRegBW40MHz == false)?HT_EXTCHNL_OFFSET_NO_EXT: (ieee->current_network.channel<=6)? HT_EXTCHNL_OFFSET_UPPER:HT_EXTCHNL_OFFSET_LOWER); pHTInfoEle->RecommemdedTxWidth = pHT->bRegBW40MHz; - pHTInfoEle->RIFS = 0; + pHTInfoEle->RIFS = 0; pHTInfoEle->PSMPAccessOnly = 0; pHTInfoEle->SrvIntGranularity = 0; pHTInfoEle->OptMode = pHT->CurrentOpMode; @@ -723,17 +723,17 @@ void HTConstructInfoElement(struct ieee80211_device* ieee, u8* posHTInfo, u8* le * Element ID Length OUI Type1 Reserved * 1 byte 1 byte 3 bytes 1 byte 1 byte * - * OUI = 0x00, 0xe0, 0x4c, - * Type = 0x02 - * Reserved = 0x00 + * OUI = 0x00, 0xe0, 0x4c, + * Type = 0x02 + * Reserved = 0x00 * * 2007.8.21 by Emily */ /******************************************************************************************************************** *function: Construct Information Element in Beacon... in RT2RT condition - * input: struct ieee80211_device* ieee - * u8* posRT2RTAgg //pointer to store Information Ele - * u8* len //store len + * input: struct ieee80211_device* ieee + * u8* posRT2RTAgg //pointer to store Information Ele + * u8* len //store len * output: none * return: none * notice: @@ -787,8 +787,8 @@ void HTConstructRT2RTAggElement(struct ieee80211_device* ieee, u8* posRT2RTAgg, /******************************************************************************************************************** *function: Pick the right Rate Adaptive table to use - * input: struct ieee80211_device* ieee - * u8* pOperateMCS //A pointer to MCS rate bitmap + * input: struct ieee80211_device* ieee + * u8* pOperateMCS //A pointer to MCS rate bitmap * return: always we return true * notice: * *****************************************************************************************************************/ @@ -840,7 +840,7 @@ u8 HT_PickMCSRate(struct ieee80211_device* ieee, u8* pOperateMCS) * Description: * This function will get the highest speed rate in input MCS set. * -* /param Adapter Pionter to Adapter entity +* /param Adapter Pionter to Adapter entity * pMCSRateSet Pointer to MCS rate bitmap * pMCSFilter Pointer to MCS rate filter * @@ -849,9 +849,9 @@ u8 HT_PickMCSRate(struct ieee80211_device* ieee, u8* pOperateMCS) */ /******************************************************************************************************************** *function: This function will get the highest speed rate in input MCS set. - * input: struct ieee80211_device* ieee - * u8* pMCSRateSet //Pointer to MCS rate bitmap - * u8* pMCSFilter //Pointer to MCS rate filter + * input: struct ieee80211_device* ieee + * u8* pMCSRateSet //Pointer to MCS rate bitmap + * u8* pMCSFilter //Pointer to MCS rate filter * return: Highest MCS rate included in pMCSRateSet and filtered by pMCSFilter * notice: * *****************************************************************************************************************/ @@ -1062,7 +1062,7 @@ void HTOnAssocRsp(struct ieee80211_device *ieee) else pHTInfo->CurrentMPDUDensity = pPeerHTCap->MPDUDensity; if(ieee->pairwise_key_type != KEY_TYPE_NA ) - pHTInfo->CurrentMPDUDensity = 7; // 8us + pHTInfo->CurrentMPDUDensity = 7; // 8us // Force TX AMSDU // Lanhsin: mark for tmp to avoid deauth by ap from s3 @@ -1118,7 +1118,7 @@ void HTOnAssocRsp(struct ieee80211_device *ieee) void HTSetConnectBwModeCallback(struct ieee80211_device* ieee); /******************************************************************************************************************** *function: initialize HT info(struct PRT_HIGH_THROUGHPUT) - * input: struct ieee80211_device* ieee + * input: struct ieee80211_device* ieee * output: none * return: none * notice: This function is called when * (1) MPInitialization Phase * (2) Receiving of Deauthentication from AP @@ -1208,13 +1208,13 @@ void HTInitializeBssDesc(PBSS_HT pBssHT) } /******************************************************************************************************************** *function: initialize Bss HT structure(struct PBSS_HT) - * input: struct ieee80211_device *ieee - * struct ieee80211_network *pNetwork //usually current network we are live in + * input: struct ieee80211_device *ieee + * struct ieee80211_network *pNetwork //usually current network we are live in * output: none * return: none * notice: This function should ONLY be called before association ********************************************************************************************************************/ -void HTResetSelfAndSavePeerSetting(struct ieee80211_device* ieee, struct ieee80211_network * pNetwork) +void HTResetSelfAndSavePeerSetting(struct ieee80211_device* ieee, struct ieee80211_network * pNetwork) { PRT_HIGH_THROUGHPUT pHTInfo = ieee->pHTInfo; // u16 nMaxAMSDUSize; @@ -1235,7 +1235,7 @@ void HTResetSelfAndSavePeerSetting(struct ieee80211_device* ieee, struct ieee80 pHTInfo->ePeerHTSpecVer = pNetwork->bssht.bdHTSpecVer; // Save HTCap and HTInfo information Element - if(pNetwork->bssht.bdHTCapLen > 0 && pNetwork->bssht.bdHTCapLen <= sizeof(pHTInfo->PeerHTCapBuf)) + if(pNetwork->bssht.bdHTCapLen > 0 && pNetwork->bssht.bdHTCapLen <= sizeof(pHTInfo->PeerHTCapBuf)) memcpy(pHTInfo->PeerHTCapBuf, pNetwork->bssht.bdHTCapBuf, pNetwork->bssht.bdHTCapLen); if(pNetwork->bssht.bdHTInfoLen > 0 && pNetwork->bssht.bdHTInfoLen <= sizeof(pHTInfo->PeerHTInfoBuf)) @@ -1297,7 +1297,7 @@ void HTResetSelfAndSavePeerSetting(struct ieee80211_device* ieee, struct ieee80 } -void HTUpdateSelfAndPeerSetting(struct ieee80211_device* ieee, struct ieee80211_network * pNetwork) +void HTUpdateSelfAndPeerSetting(struct ieee80211_device* ieee, struct ieee80211_network * pNetwork) { PRT_HIGH_THROUGHPUT pHTInfo = ieee->pHTInfo; // PHT_CAPABILITY_ELE pPeerHTCap = (PHT_CAPABILITY_ELE)pNetwork->bssht.bdHTCapBuf; @@ -1364,8 +1364,8 @@ void HTUseDefaultSetting(struct ieee80211_device* ieee) } /******************************************************************************************************************** *function: check whether HT control field exists - * input: struct ieee80211_device *ieee - * u8* pFrame //coming skb->data + * input: struct ieee80211_device *ieee + * u8* pFrame //coming skb->data * output: none * return: return true if HT control field exists(false otherwise) * notice: diff --git a/drivers/staging/rtl8192u/ieee80211/rtl819x_Qos.h b/drivers/staging/rtl8192u/ieee80211/rtl819x_Qos.h index 9e4ced15edf5..2625cdec9356 100644 --- a/drivers/staging/rtl8192u/ieee80211/rtl819x_Qos.h +++ b/drivers/staging/rtl8192u/ieee80211/rtl819x_Qos.h @@ -412,14 +412,14 @@ typedef union _QOS_TCLAS{ struct _TYPE_GENERAL{ u8 Priority; - u8 ClassifierType; - u8 Mask; + u8 ClassifierType; + u8 Mask; } TYPE_GENERAL; struct _TYPE0_ETH{ u8 Priority; - u8 ClassifierType; - u8 Mask; + u8 ClassifierType; + u8 Mask; u8 SrcAddr[6]; u8 DstAddr[6]; u16 Type; @@ -427,9 +427,9 @@ typedef union _QOS_TCLAS{ struct _TYPE1_IPV4{ u8 Priority; - u8 ClassifierType; - u8 Mask; - u8 Version; + u8 ClassifierType; + u8 Mask; + u8 Version; u8 SrcIP[4]; u8 DstIP[4]; u16 SrcPort; @@ -441,9 +441,9 @@ typedef union _QOS_TCLAS{ struct _TYPE1_IPV6{ u8 Priority; - u8 ClassifierType; - u8 Mask; - u8 Version; + u8 ClassifierType; + u8 Mask; + u8 Version; u8 SrcIP[16]; u8 DstIP[16]; u16 SrcPort; @@ -453,8 +453,8 @@ typedef union _QOS_TCLAS{ struct _TYPE2_8021Q{ u8 Priority; - u8 ClassifierType; - u8 Mask; + u8 ClassifierType; + u8 Mask; u16 TagType; } TYPE2_8021Q; } QOS_TCLAS, *PQOS_TCLAS; @@ -481,7 +481,7 @@ typedef struct _QOS_TSTREAM{ // "Qos control field" and "Qos info field" //typedef struct _QOS_UAPSD{ // u8 bTriggerEnable[4]; -// u8 MaxSPLength; +// u8 MaxSPLength; // u8 HighestBufAC; //} QOS_UAPSD, *PQOS_APSD; @@ -489,7 +489,7 @@ typedef struct _QOS_TSTREAM{ // 802.11 Management frame Status Code field //---------------------------------------------------------------------------- typedef struct _OCTET_STRING{ - u8 *Octet; + u8 *Octet; u16 Length; }OCTET_STRING, *POCTET_STRING; @@ -512,7 +512,7 @@ typedef struct _STA_QOS{ AC_UAPSD Curr4acUapsd; u8 bInServicePeriod; u8 MaxSPLength; - int NumBcnBeforeTrigger; + int NumBcnBeforeTrigger; // Part 2. EDCA Parameter (perAC) u8 * pWMMInfoEle; @@ -523,7 +523,7 @@ typedef struct _STA_QOS{ //2 ToDo: remove the Qos Info Field and replace it by the above WMM Info element. // By Bruce, 2008-01-30. // Part 2. EDCA Parameter (perAC) - QOS_INFO_FIELD QosInfoField_STA; // Maintained by STA + QOS_INFO_FIELD QosInfoField_STA; // Maintained by STA QOS_INFO_FIELD QosInfoField_AP; // Retrieved from AP AC_PARAM CurAcParameters[4]; diff --git a/drivers/staging/rtl8192u/ieee80211/rtl819x_TS.h b/drivers/staging/rtl8192u/ieee80211/rtl819x_TS.h index e7e26fd96395..7ed7243b1fb0 100644 --- a/drivers/staging/rtl8192u/ieee80211/rtl819x_TS.h +++ b/drivers/staging/rtl8192u/ieee80211/rtl819x_TS.h @@ -28,7 +28,7 @@ typedef struct _TS_COMMON_INFO{ typedef struct _TX_TS_RECORD{ TS_COMMON_INFO TsCommonInfo; u16 TxCurSeq; - BA_RECORD TxPendingBARecord; // For BA Originator + BA_RECORD TxPendingBARecord; // For BA Originator BA_RECORD TxAdmittedBARecord; // For BA Originator // QOS_DL_RECORD DLRecord; u8 bAddBaReqInProgress; @@ -53,4 +53,3 @@ typedef struct _RX_TS_RECORD { #endif - diff --git a/drivers/staging/rtl8192u/ieee80211/rtl819x_TSProc.c b/drivers/staging/rtl8192u/ieee80211/rtl819x_TSProc.c index 06a9824bbff1..0310d07287a1 100644 --- a/drivers/staging/rtl8192u/ieee80211/rtl819x_TSProc.c +++ b/drivers/staging/rtl8192u/ieee80211/rtl819x_TSProc.c @@ -27,7 +27,7 @@ void RxPktPendingTimeout(unsigned long data) PRX_TS_RECORD pRxTs = (PRX_TS_RECORD)data; struct ieee80211_device *ieee = container_of(pRxTs, struct ieee80211_device, RxTsRecord[pRxTs->num]); - PRX_REORDER_ENTRY pReorderEntry = NULL; + PRX_REORDER_ENTRY pReorderEntry = NULL; //u32 flags = 0; unsigned long flags = 0; @@ -236,8 +236,8 @@ void AdmitTS(struct ieee80211_device *ieee, PTS_COMMON_INFO pTsCommonInfo, u32 I PTS_COMMON_INFO SearchAdmitTRStream(struct ieee80211_device *ieee, u8* Addr, u8 TID, TR_SELECT TxRxSelect) { - //DIRECTION_VALUE dir; - u8 dir; + //DIRECTION_VALUE dir; + u8 dir; bool search_dir[4] = {0, 0, 0, 0}; struct list_head* psearch_list; //FIXME PTS_COMMON_INFO pRet = NULL; @@ -250,14 +250,14 @@ PTS_COMMON_INFO SearchAdmitTRStream(struct ieee80211_device *ieee, u8* Addr, u8 } else { - search_dir[DIR_UP] = true; + search_dir[DIR_UP] = true; search_dir[DIR_BI_DIR]= true; } } else if(ieee->iw_mode == IW_MODE_ADHOC) { if(TxRxSelect == TX_DIR) - search_dir[DIR_UP] = true; + search_dir[DIR_UP] = true; else search_dir[DIR_DOWN] = true; } @@ -265,7 +265,7 @@ PTS_COMMON_INFO SearchAdmitTRStream(struct ieee80211_device *ieee, u8* Addr, u8 { if(TxRxSelect == TX_DIR) { - search_dir[DIR_UP] = true; + search_dir[DIR_UP] = true; search_dir[DIR_BI_DIR]= true; search_dir[DIR_DIRECT]= true; } @@ -450,8 +450,8 @@ bool GetTs( pTSInfo->field.ucTSID = UP; // TSID pTSInfo->field.ucDirection = Dir; // Direction: if there is DirectLink, this need additional consideration. pTSInfo->field.ucAccessPolicy = 1; // Access policy - pTSInfo->field.ucAggregation = 0; // Aggregation - pTSInfo->field.ucPSB = 0; // Aggregation + pTSInfo->field.ucAggregation = 0; // Aggregation + pTSInfo->field.ucPSB = 0; // Aggregation pTSInfo->field.ucUP = UP; // User priority pTSInfo->field.ucTSInfoAckPolicy = 0; // Ack policy pTSInfo->field.ucSchedule = 0; // Schedule @@ -488,7 +488,7 @@ void RemoveTsEntry( { //#ifdef TO_DO_LIST PRX_REORDER_ENTRY pRxReorderEntry; - PRX_TS_RECORD pRxTS = (PRX_TS_RECORD)pTs; + PRX_TS_RECORD pRxTS = (PRX_TS_RECORD)pTs; if(timer_pending(&pRxTS->RxPktPendingTimer)) del_timer_sync(&pRxTS->RxPktPendingTimer); diff --git a/drivers/staging/rtl8192u/ieee80211/rtl_crypto.h b/drivers/staging/rtl8192u/ieee80211/rtl_crypto.h index ccf6ae763572..a8df4101bf2d 100644 --- a/drivers/staging/rtl8192u/ieee80211/rtl_crypto.h +++ b/drivers/staging/rtl8192u/ieee80211/rtl_crypto.h @@ -52,10 +52,10 @@ #define CRYPTO_TFM_REQ_WEAK_KEY 0x00000100 #define CRYPTO_TFM_RES_WEAK_KEY 0x00100000 -#define CRYPTO_TFM_RES_BAD_KEY_LEN 0x00200000 -#define CRYPTO_TFM_RES_BAD_KEY_SCHED 0x00400000 -#define CRYPTO_TFM_RES_BAD_BLOCK_LEN 0x00800000 -#define CRYPTO_TFM_RES_BAD_FLAGS 0x01000000 +#define CRYPTO_TFM_RES_BAD_KEY_LEN 0x00200000 +#define CRYPTO_TFM_RES_BAD_KEY_SCHED 0x00400000 +#define CRYPTO_TFM_RES_BAD_BLOCK_LEN 0x00800000 +#define CRYPTO_TFM_RES_BAD_FLAGS 0x01000000 /* * Miscellaneous stuff. @@ -396,4 +396,3 @@ void crypto_hmac(struct crypto_tfm *tfm, u8 *key, unsigned int *keylen, #endif /* CONFIG_CRYPTO_HMAC */ #endif /* _LINUX_CRYPTO_H */ - diff --git a/drivers/staging/rtl8192u/r8190_rtl8256.c b/drivers/staging/rtl8192u/r8190_rtl8256.c index 74ff337b0583..cf9713fa8b9d 100644 --- a/drivers/staging/rtl8192u/r8190_rtl8256.c +++ b/drivers/staging/rtl8192u/r8190_rtl8256.c @@ -16,9 +16,9 @@ #include "r8190_rtl8256.h" /*-------------------------------------------------------------------------- - * Overview: set RF band width (20M or 40M) + * Overview: set RF band width (20M or 40M) * Input: struct net_device* dev - * WIRELESS_BANDWIDTH_E Bandwidth //20M or 40M + * WIRELESS_BANDWIDTH_E Bandwidth //20M or 40M * Output: NONE * Return: NONE * Note: 8226 support both 20M and 40 MHz @@ -106,16 +106,16 @@ void PHY_RF8256_Config(struct net_device* dev) *---------------------------------------------------------------------------*/ void phy_RF8256_Config_ParaFile(struct net_device* dev) { - u32 u4RegValue = 0; + u32 u4RegValue = 0; //static s1Byte szRadioAFile[] = RTL819X_PHY_RADIO_A; //static s1Byte szRadioBFile[] = RTL819X_PHY_RADIO_B; //static s1Byte szRadioCFile[] = RTL819X_PHY_RADIO_C; //static s1Byte szRadioDFile[] = RTL819X_PHY_RADIO_D; - u8 eRFPath; + u8 eRFPath; BB_REGISTER_DEFINITION_T *pPhyReg; struct r8192_priv *priv = ieee80211_priv(dev); u32 RegOffSetToBeCheck = 0x3; - u32 RegValueToBeCheck = 0x7f1; + u32 RegValueToBeCheck = 0x7f1; u32 RF3_Final_Value = 0; u8 ConstRetryTimes = 5, RetryTimes = 5; u8 ret = 0; @@ -152,7 +152,7 @@ void phy_RF8256_Config_ParaFile(struct net_device* dev) rtl8192_setBBreg(dev, pPhyReg->rfintfo, bRFSI_RFENV, 0x1); /* Set bit number of Address and Data for RF register */ - rtl8192_setBBreg(dev, pPhyReg->rfHSSIPara2, b3WireAddressLength, 0x0); // Set 0 to 4 bits for Z-serial and set 1 to 6 bits for 8258 + rtl8192_setBBreg(dev, pPhyReg->rfHSSIPara2, b3WireAddressLength, 0x0); // Set 0 to 4 bits for Z-serial and set 1 to 6 bits for 8258 rtl8192_setBBreg(dev, pPhyReg->rfHSSIPara2, b3WireDataLength, 0x0); // Set 0 to 12 bits for Z-serial and 8258, and set 1 to 14 bits for ??? rtl8192_phy_SetRFReg(dev, (RF90_RADIO_PATH_E) eRFPath, 0x0, bMask12Bits, 0xbf); @@ -309,4 +309,3 @@ void PHY_SetRF8256OFDMTxPower(struct net_device* dev, u8 powerlevel) return; } - diff --git a/drivers/staging/rtl8192u/r8192U.h b/drivers/staging/rtl8192u/r8192U.h index 57e3383cc935..80ab93768ae2 100644 --- a/drivers/staging/rtl8192u/r8192U.h +++ b/drivers/staging/rtl8192u/r8192U.h @@ -110,7 +110,7 @@ do { if(rt_global_debug_component & component) \ #define COMP_RATE BIT12 // For Rate Adaptive mechanism, 2006.07.02, by rcnjko. #define COMP_RM BIT13 // For Radio Measurement. #define COMP_DIG BIT14 // For DIG, 2006.09.25, by rcnjko. -#define COMP_PHY BIT15 +#define COMP_PHY BIT15 #define COMP_CH BIT16 //channel setting debug #define COMP_TXAGC BIT17 // For Tx power, 060928, by rcnjko. #define COMP_HIPWR BIT18 // For High Power Mechanism, 060928, by rcnjko. @@ -209,7 +209,7 @@ do { if(rt_global_debug_component & component) \ #define IEEE80211_WATCH_DOG_TIME 2000 #define PHY_Beacon_RSSI_SLID_WIN_MAX 10 //for txpowertracking by amy -#define OFDM_Table_Length 19 +#define OFDM_Table_Length 19 #define CCK_Table_length 12 /* for rtl819x */ @@ -298,7 +298,7 @@ typedef struct _tx_desc_cmd_819x_usb { u8 Reserved4; //DOWRD 2 - u16 TxBufferSize; + u16 TxBufferSize; u16 Reserved5; //DWORD 3,4,5 @@ -391,7 +391,7 @@ typedef struct _rx_desc_819x_usb_aggr_subframe{ //DWORD 2 //u4Byte Reserved3; //DWORD 3 - //u4Byte BufferAddress; + //u4Byte BufferAddress; }rx_desc_819x_usb_aggr_subframe, *prx_desc_819x_usb_aggr_subframe; #endif @@ -424,7 +424,7 @@ typedef struct rx_drvinfo_819x_usb{ #define MAX_802_11_HEADER_LENGTH (40 + MAX_FIRMWARE_INFORMATION_SIZE) #define ENCRYPTION_MAX_OVERHEAD 128 #define USB_HWDESC_HEADER_LEN sizeof(tx_desc_819x_usb) -#define TX_PACKET_SHIFT_BYTES (USB_HWDESC_HEADER_LEN + sizeof(tx_fwinfo_819x_usb)) +#define TX_PACKET_SHIFT_BYTES (USB_HWDESC_HEADER_LEN + sizeof(tx_fwinfo_819x_usb)) #define MAX_FRAGMENT_COUNT 8 #ifdef RTL8192U #ifdef USB_TX_DRIVER_AGGREGATION_ENABLE @@ -433,7 +433,7 @@ typedef struct rx_drvinfo_819x_usb{ #define MAX_TRANSMIT_BUFFER_SIZE 8000 #endif #else -#define MAX_TRANSMIT_BUFFER_SIZE (1600+(MAX_802_11_HEADER_LENGTH+ENCRYPTION_MAX_OVERHEAD)*MAX_FRAGMENT_COUNT) +#define MAX_TRANSMIT_BUFFER_SIZE (1600+(MAX_802_11_HEADER_LENGTH+ENCRYPTION_MAX_OVERHEAD)*MAX_FRAGMENT_COUNT) #endif #ifdef USB_TX_DRIVER_AGGREGATION_ENABLE #define TX_PACKET_DRVAGGR_SUBFRAME_SHIFT_BYTES (sizeof(tx_desc_819x_usb_aggr_subframe) + sizeof(tx_fwinfo_819x_usb)) @@ -711,7 +711,7 @@ typedef struct Stats //+by amy 080507 -typedef struct ChnlAccessSetting { +typedef struct ChnlAccessSetting { u16 SIFS_Timer; u16 DIFS_Timer; u16 SlotTimeTimer; @@ -721,23 +721,23 @@ typedef struct ChnlAccessSetting { }*PCHANNEL_ACCESS_SETTING,CHANNEL_ACCESS_SETTING; typedef struct _BB_REGISTER_DEFINITION{ - u32 rfintfs; // set software control: // 0x870~0x877[8 bytes] - u32 rfintfi; // readback data: // 0x8e0~0x8e7[8 bytes] - u32 rfintfo; // output data: // 0x860~0x86f [16 bytes] - u32 rfintfe; // output enable: // 0x860~0x86f [16 bytes] - u32 rf3wireOffset; // LSSI data: // 0x840~0x84f [16 bytes] - u32 rfLSSI_Select; // BB Band Select: // 0x878~0x87f [8 bytes] + u32 rfintfs; // set software control: // 0x870~0x877[8 bytes] + u32 rfintfi; // readback data: // 0x8e0~0x8e7[8 bytes] + u32 rfintfo; // output data: // 0x860~0x86f [16 bytes] + u32 rfintfe; // output enable: // 0x860~0x86f [16 bytes] + u32 rf3wireOffset; // LSSI data: // 0x840~0x84f [16 bytes] + u32 rfLSSI_Select; // BB Band Select: // 0x878~0x87f [8 bytes] u32 rfTxGainStage; // Tx gain stage: // 0x80c~0x80f [4 bytes] - u32 rfHSSIPara1; // wire parameter control1 : // 0x820~0x823,0x828~0x82b, 0x830~0x833, 0x838~0x83b [16 bytes] - u32 rfHSSIPara2; // wire parameter control2 : // 0x824~0x827,0x82c~0x82f, 0x834~0x837, 0x83c~0x83f [16 bytes] - u32 rfSwitchControl; //Tx Rx antenna control : // 0x858~0x85f [16 bytes] - u32 rfAGCControl1; //AGC parameter control1 : // 0xc50~0xc53,0xc58~0xc5b, 0xc60~0xc63, 0xc68~0xc6b [16 bytes] - u32 rfAGCControl2; //AGC parameter control2 : // 0xc54~0xc57,0xc5c~0xc5f, 0xc64~0xc67, 0xc6c~0xc6f [16 bytes] - u32 rfRxIQImbalance; //OFDM Rx IQ imbalance matrix : // 0xc14~0xc17,0xc1c~0xc1f, 0xc24~0xc27, 0xc2c~0xc2f [16 bytes] - u32 rfRxAFE; //Rx IQ DC ofset and Rx digital filter, Rx DC notch filter : // 0xc10~0xc13,0xc18~0xc1b, 0xc20~0xc23, 0xc28~0xc2b [16 bytes] - u32 rfTxIQImbalance; //OFDM Tx IQ imbalance matrix // 0xc80~0xc83,0xc88~0xc8b, 0xc90~0xc93, 0xc98~0xc9b [16 bytes] - u32 rfTxAFE; //Tx IQ DC Offset and Tx DFIR type // 0xc84~0xc87,0xc8c~0xc8f, 0xc94~0xc97, 0xc9c~0xc9f [16 bytes] - u32 rfLSSIReadBack; //LSSI RF readback data // 0x8a0~0x8af [16 bytes] + u32 rfHSSIPara1; // wire parameter control1 : // 0x820~0x823,0x828~0x82b, 0x830~0x833, 0x838~0x83b [16 bytes] + u32 rfHSSIPara2; // wire parameter control2 : // 0x824~0x827,0x82c~0x82f, 0x834~0x837, 0x83c~0x83f [16 bytes] + u32 rfSwitchControl; //Tx Rx antenna control : // 0x858~0x85f [16 bytes] + u32 rfAGCControl1; //AGC parameter control1 : // 0xc50~0xc53,0xc58~0xc5b, 0xc60~0xc63, 0xc68~0xc6b [16 bytes] + u32 rfAGCControl2; //AGC parameter control2 : // 0xc54~0xc57,0xc5c~0xc5f, 0xc64~0xc67, 0xc6c~0xc6f [16 bytes] + u32 rfRxIQImbalance; //OFDM Rx IQ imbalance matrix : // 0xc14~0xc17,0xc1c~0xc1f, 0xc24~0xc27, 0xc2c~0xc2f [16 bytes] + u32 rfRxAFE; //Rx IQ DC ofset and Rx digital filter, Rx DC notch filter : // 0xc10~0xc13,0xc18~0xc1b, 0xc20~0xc23, 0xc28~0xc2b [16 bytes] + u32 rfTxIQImbalance; //OFDM Tx IQ imbalance matrix // 0xc80~0xc83,0xc88~0xc8b, 0xc90~0xc93, 0xc98~0xc9b [16 bytes] + u32 rfTxAFE; //Tx IQ DC Offset and Tx DFIR type // 0xc84~0xc87,0xc8c~0xc8f, 0xc94~0xc97, 0xc9c~0xc9f [16 bytes] + u32 rfLSSIReadBack; //LSSI RF readback data // 0x8a0~0x8af [16 bytes] }BB_REGISTER_DEFINITION_T, *PBB_REGISTER_DEFINITION_T; typedef enum _RT_RF_TYPE_819xU{ @@ -1006,7 +1006,7 @@ typedef struct r8192_priv u8 retry_rts; u16 rts; - struct ChnlAccessSetting ChannelAccessSetting; + struct ChnlAccessSetting ChannelAccessSetting; struct work_struct reset_wq; /**********************************************************/ @@ -1014,7 +1014,7 @@ typedef struct r8192_priv u16 basic_rate; u8 short_preamble; u8 slot_time; - bool bDcut; + bool bDcut; bool bCurrentRxAggrEnable; u8 Rf_Mode; //add for Firmware RF -R/W switch prt_firmware pFirmware; @@ -1050,7 +1050,7 @@ typedef struct r8192_priv //for set channel u8 SwChnlInProgress; - u8 SwChnlStage; + u8 SwChnlStage; u8 SwChnlStep; u8 SetBWModeInProgress; HT_CHANNEL_WIDTH CurrentChannelBW; @@ -1062,8 +1062,8 @@ typedef struct r8192_priv // We save RF reg0 in this variable to reduce RF reading. // u32 RfReg0Value[4]; - u8 NumTotalRFPath; - bool brfpath_rxenable[4]; + u8 NumTotalRFPath; + bool brfpath_rxenable[4]; //RF set related bool SetRFPowerStateInProgress; //+by amy 080507 @@ -1104,7 +1104,7 @@ typedef struct r8192_priv bool btxpower_tracking; bool bcck_in_ch14; bool btxpowerdata_readfromEEPORM; - u16 TSSI_13dBm; + u16 TSSI_13dBm; //For Backup Initial Gain init_gain initgain_backup; u8 DefaultInitialGain[4]; @@ -1114,17 +1114,17 @@ typedef struct r8192_priv bool bis_cur_rdlstate; struct timer_list fsync_timer; bool bfsync_processing; // 500ms Fsync timer is active or not - u32 rate_record; - u32 rateCountDiffRecord; + u32 rate_record; + u32 rateCountDiffRecord; u32 ContinueDiffCount; bool bswitch_fsync; u8 framesync; - u32 framesyncC34; - u8 framesyncMonitor; - //Added by amy 080516 for RX related - u16 nrxAMPDU_size; - u8 nrxAMPDU_aggr_num; + u32 framesyncC34; + u8 framesyncMonitor; + //Added by amy 080516 for RX related + u16 nrxAMPDU_size; + u8 nrxAMPDU_aggr_num; //by amy for gpio bool bHwRadioOff; @@ -1204,7 +1204,7 @@ typedef enum{ #ifdef JOHN_HWSEC struct ssid_thread { struct net_device *dev; - u8 name[IW_ESSID_MAX_SIZE + 1]; + u8 name[IW_ESSID_MAX_SIZE + 1]; }; #endif diff --git a/drivers/staging/rtl8192u/r8192U_core.c b/drivers/staging/rtl8192u/r8192U_core.c index 56367f23112f..1887dde99b9b 100644 --- a/drivers/staging/rtl8192u/r8192U_core.c +++ b/drivers/staging/rtl8192u/r8192U_core.c @@ -80,9 +80,9 @@ double __extendsfdf2(float a) {return a;} #include "dot11d.h" //set here to open your trace code. //WB u32 rt_global_debug_component = \ - // COMP_INIT | + // COMP_INIT | // COMP_DBG | - // COMP_EPROM | + // COMP_EPROM | // COMP_PHY | // COMP_RF | // COMP_FIRMWARE | @@ -159,7 +159,7 @@ static struct usb_driver rtl8192_usb_driver = { .resume = rtl8192_resume, /* PM resume fn */ #else .suspend = NULL, /* PM suspend fn */ - .resume = NULL, /* PM resume fn */ + .resume = NULL, /* PM resume fn */ #endif }; @@ -171,11 +171,11 @@ typedef struct _CHANNEL_LIST }CHANNEL_LIST, *PCHANNEL_LIST; static CHANNEL_LIST ChannelPlan[] = { - {{1,2,3,4,5,6,7,8,9,10,11,36,40,44,48,52,56,60,64,149,153,157,161,165},24}, //FCC - {{1,2,3,4,5,6,7,8,9,10,11},11}, //IC - {{1,2,3,4,5,6,7,8,9,10,11,12,13,36,40,44,48,52,56,60,64},21}, //ETSI + {{1,2,3,4,5,6,7,8,9,10,11,36,40,44,48,52,56,60,64,149,153,157,161,165},24}, //FCC + {{1,2,3,4,5,6,7,8,9,10,11},11}, //IC + {{1,2,3,4,5,6,7,8,9,10,11,12,13,36,40,44,48,52,56,60,64},21}, //ETSI {{1,2,3,4,5,6,7,8,9,10,11,12,13},13}, //Spain. Change to ETSI. - {{1,2,3,4,5,6,7,8,9,10,11,12,13},13}, //France. Change to ETSI. + {{1,2,3,4,5,6,7,8,9,10,11,12,13},13}, //France. Change to ETSI. {{1,2,3,4,5,6,7,8,9,10,11,12,13,14,36,40,44,48,52,56,60,64},22}, //MKK //MKK {{1,2,3,4,5,6,7,8,9,10,11,12,13,14,36,40,44,48,52,56,60,64},22},//MKK1 {{1,2,3,4,5,6,7,8,9,10,11,12,13},13}, //Israel. @@ -240,7 +240,7 @@ static void rtl819x_set_channel_map(u8 channel_plan, struct r8192_priv* priv) } -#define rx_hal_is_cck_rate(_pdrvinfo)\ +#define rx_hal_is_cck_rate(_pdrvinfo)\ (_pdrvinfo->RxRate == DESC90_RATE1M ||\ _pdrvinfo->RxRate == DESC90_RATE2M ||\ _pdrvinfo->RxRate == DESC90_RATE5_5M ||\ @@ -1272,8 +1272,8 @@ struct sk_buff *DrvAggr_Aggregation(struct net_device *dev, struct ieee80211_drv { struct ieee80211_device *ieee = netdev_priv(dev); struct r8192_priv *priv = ieee80211_priv(dev); - cb_desc *tcb_desc = NULL; - u8 i; + cb_desc *tcb_desc = NULL; + u8 i; u32 TotalLength; struct sk_buff *skb; struct sk_buff *agg_skb; @@ -1444,7 +1444,7 @@ u8 DrvAggr_GetAggregatibleList(struct net_device *dev, struct sk_buff *skb, struct ieee80211_device *ieee = netdev_priv(dev); PRT_HIGH_THROUGHPUT pHTInfo = ieee->pHTInfo; u16 nMaxAggrNum = pHTInfo->UsbTxAggrNum; - cb_desc *tcb_desc = (cb_desc *)(skb->cb + MAX_DEV_ADDR_SIZE); + cb_desc *tcb_desc = (cb_desc *)(skb->cb + MAX_DEV_ADDR_SIZE); u8 QueueID = tcb_desc->queue_index; do { @@ -1812,7 +1812,7 @@ short rtl819xU_tx_cmd(struct net_device *dev, struct sk_buff *skb) int status; struct urb *tx_urb; //int urb_buf_len; - unsigned int idx_pipe; + unsigned int idx_pipe; tx_desc_cmd_819x_usb *pdesc = (tx_desc_cmd_819x_usb *)skb->data; cb_desc *tcb_desc = (cb_desc *)(skb->cb + MAX_DEV_ADDR_SIZE); u8 queue_index = tcb_desc->queue_index; @@ -2346,7 +2346,7 @@ void rtl8192_update_beacon(struct work_struct * work) { struct r8192_priv *priv = container_of(work, struct r8192_priv, update_beacon_wq.work); struct net_device *dev = priv->ieee80211->dev; - struct ieee80211_device* ieee = priv->ieee80211; + struct ieee80211_device* ieee = priv->ieee80211; struct ieee80211_network* net = &ieee->current_network; if (ieee->pHTInfo->bCurrentHTSupport) @@ -2717,7 +2717,7 @@ static void rtl8192_init_priv_variable(struct net_device* dev) priv->bDisableNormalResetCheck = false; priv->force_reset = false; - priv->ieee80211->FwRWRF = 0; //we don't use FW read/write RF until stable firmware is available. + priv->ieee80211->FwRWRF = 0; //we don't use FW read/write RF until stable firmware is available. priv->ieee80211->current_network.beacon_interval = DEFAULT_BEACONINTERVAL; priv->ieee80211->iw_mode = IW_MODE_INFRA; priv->ieee80211->softmac_features = IEEE_SOFTMAC_SCAN | @@ -2778,11 +2778,11 @@ static void rtl8192_init_priv_variable(struct net_device* dev) #ifdef TO_DO_LIST if(Adapter->bInHctTest) pHalData->ReceiveConfig = pHalData->CSMethod | - RCR_AMF | RCR_ADF | //RCR_AAP | //accept management/data + RCR_AMF | RCR_ADF | //RCR_AAP | //accept management/data //guangan200710 RCR_ACF | //accept control frame for SW AP needs PS-poll, 2005.07.07, by rcnjko. RCR_AB | RCR_AM | RCR_APM | //accept BC/MC/UC - RCR_AICV | RCR_ACRC32 | //accept ICV/CRC error packet + RCR_AICV | RCR_ACRC32 | //accept ICV/CRC error packet ((u32)7<EarlyRxThreshold<EarlyRxThreshold == 7 ? RCR_OnlyErlPkt:0); @@ -2793,7 +2793,7 @@ static void rtl8192_init_priv_variable(struct net_device* dev) RCR_AMF | RCR_ADF | //accept management/data RCR_ACF | //accept control frame for SW AP needs PS-poll, 2005.07.07, by rcnjko. RCR_AB | RCR_AM | RCR_APM | //accept BC/MC/UC - //RCR_AICV | RCR_ACRC32 | //accept ICV/CRC error packet + //RCR_AICV | RCR_ACRC32 | //accept ICV/CRC error packet ((u32)7<EarlyRxThreshold<EarlyRxThreshold == 7 ? RCR_ONLYERLPKT:0); @@ -3549,7 +3549,7 @@ HalTxCheckStuck819xUsb( ) { struct r8192_priv *priv = ieee80211_priv(dev); - u16 RegTxCounter = read_nic_word(dev, 0x128); + u16 RegTxCounter = read_nic_word(dev, 0x128); bool bStuck = FALSE; RT_TRACE(COMP_RESET,"%s():RegTxCounter is %d,TxCounter is %d\n",__FUNCTION__,RegTxCounter,priv->TxCounter); if(priv->TxCounter==RegTxCounter) @@ -3583,14 +3583,14 @@ TxCheckStuck(struct net_device *dev) // spin_lock_irqsave(&priv->ieee80211->lock,flags); for (QueueID = 0; QueueID<=BEACON_QUEUE;QueueID ++) { - if(QueueID == TXCMD_QUEUE) + if(QueueID == TXCMD_QUEUE) continue; #ifdef USB_TX_DRIVER_AGGREGATION_ENABLE if((skb_queue_len(&priv->ieee80211->skb_waitQ[QueueID]) == 0) && (skb_queue_len(&priv->ieee80211->skb_aggQ[QueueID]) == 0) && (skb_queue_len(&priv->ieee80211->skb_drv_aggQ[QueueID]) == 0)) #else - if((skb_queue_len(&priv->ieee80211->skb_waitQ[QueueID]) == 0) && (skb_queue_len(&priv->ieee80211->skb_aggQ[QueueID]) == 0)) + if((skb_queue_len(&priv->ieee80211->skb_waitQ[QueueID]) == 0) && (skb_queue_len(&priv->ieee80211->skb_aggQ[QueueID]) == 0)) #endif - continue; + continue; bCheckFwTxCnt = true; } @@ -3611,7 +3611,7 @@ TxCheckStuck(struct net_device *dev) bool HalRxCheckStuck819xUsb(struct net_device *dev) { - u16 RegRxCounter = read_nic_word(dev, 0x130); + u16 RegRxCounter = read_nic_word(dev, 0x130); struct r8192_priv *priv = ieee80211_priv(dev); bool bStuck = FALSE; static u8 rx_chk_cnt = 0; @@ -3718,7 +3718,7 @@ rtl819x_ifcheck_resetornot(struct net_device *dev) struct r8192_priv *priv = ieee80211_priv(dev); RESET_TYPE TxResetType = RESET_TYPE_NORESET; RESET_TYPE RxResetType = RESET_TYPE_NORESET; - RT_RF_POWER_STATE rfState; + RT_RF_POWER_STATE rfState; rfState = priv->ieee80211->eRFPowerState; @@ -4006,18 +4006,18 @@ RESET_START: void CAM_read_entry( struct net_device *dev, - u32 iIndex + u32 iIndex ) { - u32 target_command=0; + u32 target_command=0; u32 target_content=0; u8 entry_i=0; u32 ulStatus; s32 i=100; // printk("=======>start read CAM\n"); - for(entry_i=0;entry_i= 3) { - ResetType = rtl819x_ifcheck_resetornot(dev); + ResetType = rtl819x_ifcheck_resetornot(dev); check_reset_cnt = 3; //DbgPrint("Start to check silent reset\n"); } @@ -4418,10 +4418,10 @@ int rtl8192_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) setKey( dev, ipw->u.crypt.idx, ipw->u.crypt.idx, //KeyIndex - ieee->group_key_type, //KeyType - broadcast_addr, //MacAddr + ieee->group_key_type, //KeyType + broadcast_addr, //MacAddr 0, //DefaultKey - key); //KeyContent + key); //KeyContent } } } @@ -4819,7 +4819,7 @@ rtl819x_evm_dbtopercentage( } // // Description: -// We want good-looking for signal strength/quality +// We want good-looking for signal strength/quality // 2007/7/19 01:09, by cosa. // long @@ -5203,7 +5203,7 @@ void TranslateRxSignalStuff819xUsb(struct sk_buff *skb, * Overview: Record the received data rate * * Input: -* struct net_device *dev +* struct net_device *dev * struct ieee80211_rx_stats *stats * * Output: @@ -5581,7 +5581,7 @@ rtl819xusb_process_received_packet( ) { // bool bfreerfd=false, bqueued=false; - u8* frame; + u8* frame; u16 frame_len=0; struct r8192_priv *priv = ieee80211_priv(dev); // u8 index = 0; @@ -6007,7 +6007,7 @@ void setKey( struct net_device *dev, // printk("setkey cam =%8x\n", read_cam(dev, i+6*EntryNo)); } else if(i==1){//MAC - TargetContent = (u32)(*(MacAddr+2)) | + TargetContent = (u32)(*(MacAddr+2)) | (u32)(*(MacAddr+3)) << 8| (u32)(*(MacAddr+4)) << 16| (u32)(*(MacAddr+5)) << 24; diff --git a/drivers/staging/rtl8192u/r8192U_dm.c b/drivers/staging/rtl8192u/r8192U_dm.c index cd8dc85e9c0f..7e2918fbe814 100644 --- a/drivers/staging/rtl8192u/r8192U_dm.c +++ b/drivers/staging/rtl8192u/r8192U_dm.c @@ -8,7 +8,7 @@ Abstract: HW dynamic mechanism. Major Change History: - When Who What + When Who What ---------- --------------- ------------------------------- 2008-05-14 amy create version 0 porting from windows code. @@ -25,9 +25,9 @@ Major Change History: // Indicate different AP vendor for IOT issue. // static u32 edca_setting_DL[HT_IOT_PEER_MAX] = - { 0x5e4322, 0x5e4322, 0x5e4322, 0x604322, 0xa44f, 0x5ea44f}; + { 0x5e4322, 0x5e4322, 0x5e4322, 0x604322, 0xa44f, 0x5ea44f}; static u32 edca_setting_UL[HT_IOT_PEER_MAX] = - { 0x5e4322, 0xa44f, 0x5e4322, 0x604322, 0x5ea44f, 0x5ea44f}; + { 0x5e4322, 0xa44f, 0x5e4322, 0x604322, 0x5ea44f, 0x5ea44f}; #define RTK_UL_EDCA 0xa44f @@ -134,7 +134,7 @@ static void dm_check_pbc_gpio(struct net_device *dev); // DM --> Check current RX RF path state static void dm_check_rx_path_selection(struct net_device *dev); -static void dm_init_rxpath_selection(struct net_device *dev); +static void dm_init_rxpath_selection(struct net_device *dev); static void dm_rxpath_sel_byrssi(struct net_device *dev); @@ -259,7 +259,7 @@ extern void hal_dm_watchdog(struct net_device *dev) { //struct r8192_priv *priv = ieee80211_priv(dev); - //static u8 previous_bssid[6] ={0}; + //static u8 previous_bssid[6] ={0}; /*Add by amy 2008/05/15 ,porting from windows code.*/ dm_check_rate_adaptive(dev); @@ -315,21 +315,21 @@ extern void init_rate_adaptive(struct net_device * dev) { // 07/10/08 MH Modify for RA smooth scheme. /* 2008/01/11 MH Modify 2T RATR table for different RSSI. 080515 porting by amy from windows code.*/ - pra->upper_rssi_threshold_ratr = 0x8f0f0000; - pra->middle_rssi_threshold_ratr = 0x8f0ff000; - pra->low_rssi_threshold_ratr = 0x8f0ff001; - pra->low_rssi_threshold_ratr_40M = 0x8f0ff005; - pra->low_rssi_threshold_ratr_20M = 0x8f0ff001; - pra->ping_rssi_ratr = 0x0000000d;//cosa add for test + pra->upper_rssi_threshold_ratr = 0x8f0f0000; + pra->middle_rssi_threshold_ratr = 0x8f0ff000; + pra->low_rssi_threshold_ratr = 0x8f0ff001; + pra->low_rssi_threshold_ratr_40M = 0x8f0ff005; + pra->low_rssi_threshold_ratr_20M = 0x8f0ff001; + pra->ping_rssi_ratr = 0x0000000d;//cosa add for test } else if (priv->rf_type == RF_1T2R) { - pra->upper_rssi_threshold_ratr = 0x000f0000; - pra->middle_rssi_threshold_ratr = 0x000ff000; - pra->low_rssi_threshold_ratr = 0x000ff001; - pra->low_rssi_threshold_ratr_40M = 0x000ff005; - pra->low_rssi_threshold_ratr_20M = 0x000ff001; - pra->ping_rssi_ratr = 0x0000000d;//cosa add for test + pra->upper_rssi_threshold_ratr = 0x000f0000; + pra->middle_rssi_threshold_ratr = 0x000ff000; + pra->low_rssi_threshold_ratr = 0x000ff001; + pra->low_rssi_threshold_ratr_40M = 0x000ff005; + pra->low_rssi_threshold_ratr_20M = 0x000ff001; + pra->ping_rssi_ratr = 0x0000000d;//cosa add for test } } // InitRateAdaptive @@ -348,7 +348,7 @@ extern void init_rate_adaptive(struct net_device * dev) * * Revised History: * When Who Remark - * 05/26/08 amy Create version 0 porting from windows code. + * 05/26/08 amy Create version 0 porting from windows code. * *---------------------------------------------------------------------------*/ static void dm_check_rate_adaptive(struct net_device * dev) @@ -413,14 +413,14 @@ static void dm_check_rate_adaptive(struct net_device * dev) to prevent jumping frequently. */ if (pra->ratr_state == DM_RATR_STA_HIGH) { - HighRSSIThreshForRA = pra->high2low_rssi_thresh_for_ra; + HighRSSIThreshForRA = pra->high2low_rssi_thresh_for_ra; LowRSSIThreshForRA = (priv->CurrentChannelBW != HT_CHANNEL_WIDTH_20)? (pra->low_rssi_thresh_for_ra40M):(pra->low_rssi_thresh_for_ra20M); } else if (pra->ratr_state == DM_RATR_STA_LOW) { HighRSSIThreshForRA = pra->high_rssi_thresh_for_ra; - LowRSSIThreshForRA = (priv->CurrentChannelBW != HT_CHANNEL_WIDTH_20)? + LowRSSIThreshForRA = (priv->CurrentChannelBW != HT_CHANNEL_WIDTH_20)? (pra->low2high_rssi_thresh_for_ra40M):(pra->low2high_rssi_thresh_for_ra20M); } else @@ -599,7 +599,7 @@ static void dm_TXPowerTrackingCallback_TSSI(struct net_device * dev) u32 Value; u8 Pwr_Flag; u16 Avg_TSSI_Meas, TSSI_13dBm, Avg_TSSI_Meas_from_driver=0; - //RT_STATUS rtStatus = RT_STATUS_SUCCESS; + //RT_STATUS rtStatus = RT_STATUS_SUCCESS; bool rtStatus = true; u32 delta=0; @@ -954,79 +954,79 @@ static void dm_InitializeTXPowerTracking_TSSI(struct net_device *dev) struct r8192_priv *priv = ieee80211_priv(dev); //Initial the Tx BB index and mapping value - priv->txbbgain_table[0].txbb_iq_amplifygain = 12; + priv->txbbgain_table[0].txbb_iq_amplifygain = 12; priv->txbbgain_table[0].txbbgain_value=0x7f8001fe; - priv->txbbgain_table[1].txbb_iq_amplifygain = 11; + priv->txbbgain_table[1].txbb_iq_amplifygain = 11; priv->txbbgain_table[1].txbbgain_value=0x788001e2; - priv->txbbgain_table[2].txbb_iq_amplifygain = 10; + priv->txbbgain_table[2].txbb_iq_amplifygain = 10; priv->txbbgain_table[2].txbbgain_value=0x71c001c7; - priv->txbbgain_table[3].txbb_iq_amplifygain = 9; + priv->txbbgain_table[3].txbb_iq_amplifygain = 9; priv->txbbgain_table[3].txbbgain_value=0x6b8001ae; - priv->txbbgain_table[4].txbb_iq_amplifygain = 8; + priv->txbbgain_table[4].txbb_iq_amplifygain = 8; priv->txbbgain_table[4].txbbgain_value=0x65400195; - priv->txbbgain_table[5].txbb_iq_amplifygain = 7; + priv->txbbgain_table[5].txbb_iq_amplifygain = 7; priv->txbbgain_table[5].txbbgain_value=0x5fc0017f; - priv->txbbgain_table[6].txbb_iq_amplifygain = 6; + priv->txbbgain_table[6].txbb_iq_amplifygain = 6; priv->txbbgain_table[6].txbbgain_value=0x5a400169; - priv->txbbgain_table[7].txbb_iq_amplifygain = 5; + priv->txbbgain_table[7].txbb_iq_amplifygain = 5; priv->txbbgain_table[7].txbbgain_value=0x55400155; - priv->txbbgain_table[8].txbb_iq_amplifygain = 4; + priv->txbbgain_table[8].txbb_iq_amplifygain = 4; priv->txbbgain_table[8].txbbgain_value=0x50800142; - priv->txbbgain_table[9].txbb_iq_amplifygain = 3; + priv->txbbgain_table[9].txbb_iq_amplifygain = 3; priv->txbbgain_table[9].txbbgain_value=0x4c000130; - priv->txbbgain_table[10].txbb_iq_amplifygain = 2; + priv->txbbgain_table[10].txbb_iq_amplifygain = 2; priv->txbbgain_table[10].txbbgain_value=0x47c0011f; - priv->txbbgain_table[11].txbb_iq_amplifygain = 1; + priv->txbbgain_table[11].txbb_iq_amplifygain = 1; priv->txbbgain_table[11].txbbgain_value=0x43c0010f; - priv->txbbgain_table[12].txbb_iq_amplifygain = 0; + priv->txbbgain_table[12].txbb_iq_amplifygain = 0; priv->txbbgain_table[12].txbbgain_value=0x40000100; - priv->txbbgain_table[13].txbb_iq_amplifygain = -1; + priv->txbbgain_table[13].txbb_iq_amplifygain = -1; priv->txbbgain_table[13].txbbgain_value=0x3c8000f2; - priv->txbbgain_table[14].txbb_iq_amplifygain = -2; + priv->txbbgain_table[14].txbb_iq_amplifygain = -2; priv->txbbgain_table[14].txbbgain_value=0x390000e4; - priv->txbbgain_table[15].txbb_iq_amplifygain = -3; + priv->txbbgain_table[15].txbb_iq_amplifygain = -3; priv->txbbgain_table[15].txbbgain_value=0x35c000d7; - priv->txbbgain_table[16].txbb_iq_amplifygain = -4; + priv->txbbgain_table[16].txbb_iq_amplifygain = -4; priv->txbbgain_table[16].txbbgain_value=0x32c000cb; - priv->txbbgain_table[17].txbb_iq_amplifygain = -5; + priv->txbbgain_table[17].txbb_iq_amplifygain = -5; priv->txbbgain_table[17].txbbgain_value=0x300000c0; - priv->txbbgain_table[18].txbb_iq_amplifygain = -6; + priv->txbbgain_table[18].txbb_iq_amplifygain = -6; priv->txbbgain_table[18].txbbgain_value=0x2d4000b5; - priv->txbbgain_table[19].txbb_iq_amplifygain = -7; + priv->txbbgain_table[19].txbb_iq_amplifygain = -7; priv->txbbgain_table[19].txbbgain_value=0x2ac000ab; - priv->txbbgain_table[20].txbb_iq_amplifygain = -8; + priv->txbbgain_table[20].txbb_iq_amplifygain = -8; priv->txbbgain_table[20].txbbgain_value=0x288000a2; - priv->txbbgain_table[21].txbb_iq_amplifygain = -9; + priv->txbbgain_table[21].txbb_iq_amplifygain = -9; priv->txbbgain_table[21].txbbgain_value=0x26000098; - priv->txbbgain_table[22].txbb_iq_amplifygain = -10; + priv->txbbgain_table[22].txbb_iq_amplifygain = -10; priv->txbbgain_table[22].txbbgain_value=0x24000090; - priv->txbbgain_table[23].txbb_iq_amplifygain = -11; + priv->txbbgain_table[23].txbb_iq_amplifygain = -11; priv->txbbgain_table[23].txbbgain_value=0x22000088; - priv->txbbgain_table[24].txbb_iq_amplifygain = -12; + priv->txbbgain_table[24].txbb_iq_amplifygain = -12; priv->txbbgain_table[24].txbbgain_value=0x20000080; - priv->txbbgain_table[25].txbb_iq_amplifygain = -13; + priv->txbbgain_table[25].txbb_iq_amplifygain = -13; priv->txbbgain_table[25].txbbgain_value=0x1a00006c; - priv->txbbgain_table[26].txbb_iq_amplifygain = -14; + priv->txbbgain_table[26].txbb_iq_amplifygain = -14; priv->txbbgain_table[26].txbbgain_value=0x1c800072; - priv->txbbgain_table[27].txbb_iq_amplifygain = -15; + priv->txbbgain_table[27].txbb_iq_amplifygain = -15; priv->txbbgain_table[27].txbbgain_value=0x18000060; - priv->txbbgain_table[28].txbb_iq_amplifygain = -16; + priv->txbbgain_table[28].txbb_iq_amplifygain = -16; priv->txbbgain_table[28].txbbgain_value=0x19800066; - priv->txbbgain_table[29].txbb_iq_amplifygain = -17; + priv->txbbgain_table[29].txbb_iq_amplifygain = -17; priv->txbbgain_table[29].txbbgain_value=0x15800056; - priv->txbbgain_table[30].txbb_iq_amplifygain = -18; + priv->txbbgain_table[30].txbb_iq_amplifygain = -18; priv->txbbgain_table[30].txbbgain_value=0x26c0005b; - priv->txbbgain_table[31].txbb_iq_amplifygain = -19; + priv->txbbgain_table[31].txbb_iq_amplifygain = -19; priv->txbbgain_table[31].txbbgain_value=0x14400051; - priv->txbbgain_table[32].txbb_iq_amplifygain = -20; + priv->txbbgain_table[32].txbb_iq_amplifygain = -20; priv->txbbgain_table[32].txbbgain_value=0x24400051; - priv->txbbgain_table[33].txbb_iq_amplifygain = -21; + priv->txbbgain_table[33].txbb_iq_amplifygain = -21; priv->txbbgain_table[33].txbbgain_value=0x1300004c; - priv->txbbgain_table[34].txbb_iq_amplifygain = -22; + priv->txbbgain_table[34].txbb_iq_amplifygain = -22; priv->txbbgain_table[34].txbbgain_value=0x12000048; - priv->txbbgain_table[35].txbb_iq_amplifygain = -23; + priv->txbbgain_table[35].txbb_iq_amplifygain = -23; priv->txbbgain_table[35].txbbgain_value=0x11000044; - priv->txbbgain_table[36].txbb_iq_amplifygain = -24; + priv->txbbgain_table[36].txbb_iq_amplifygain = -24; priv->txbbgain_table[36].txbbgain_value=0x10000040; //ccktxbb_valuearray[0] is 0xA22 [1] is 0xA24 ...[7] is 0xA29 @@ -1505,7 +1505,7 @@ static void dm_CheckTXPowerTracking_TSSI(struct net_device *dev) static void dm_CheckTXPowerTracking_ThermalMeter(struct net_device *dev) { struct r8192_priv *priv = ieee80211_priv(dev); - static u8 TM_Trigger=0; + static u8 TM_Trigger=0; //DbgPrint("dm_CheckTXPowerTracking() \n"); if(!priv->btxpower_tracking) return; @@ -1564,40 +1564,40 @@ static void dm_CCKTxPowerAdjust_TSSI(struct net_device *dev, bool bInCH14) TempVal = 0; if(!bInCH14){ //Write 0xa22 0xa23 - TempVal = priv->cck_txbbgain_table[priv->cck_present_attentuation].ccktxbb_valuearray[0] + + TempVal = priv->cck_txbbgain_table[priv->cck_present_attentuation].ccktxbb_valuearray[0] + (priv->cck_txbbgain_table[priv->cck_present_attentuation].ccktxbb_valuearray[1]<<8) ; rtl8192_setBBreg(dev, rCCK0_TxFilter1,bMaskHWord, TempVal); //Write 0xa24 ~ 0xa27 TempVal = 0; - TempVal = priv->cck_txbbgain_table[priv->cck_present_attentuation].ccktxbb_valuearray[2] + + TempVal = priv->cck_txbbgain_table[priv->cck_present_attentuation].ccktxbb_valuearray[2] + (priv->cck_txbbgain_table[priv->cck_present_attentuation].ccktxbb_valuearray[3]<<8) + (priv->cck_txbbgain_table[priv->cck_present_attentuation].ccktxbb_valuearray[4]<<16 )+ (priv->cck_txbbgain_table[priv->cck_present_attentuation].ccktxbb_valuearray[5]<<24); rtl8192_setBBreg(dev, rCCK0_TxFilter2,bMaskDWord, TempVal); //Write 0xa28 0xa29 TempVal = 0; - TempVal = priv->cck_txbbgain_table[priv->cck_present_attentuation].ccktxbb_valuearray[6] + + TempVal = priv->cck_txbbgain_table[priv->cck_present_attentuation].ccktxbb_valuearray[6] + (priv->cck_txbbgain_table[priv->cck_present_attentuation].ccktxbb_valuearray[7]<<8) ; rtl8192_setBBreg(dev, rCCK0_DebugPort,bMaskLWord, TempVal); } else { - TempVal = priv->cck_txbbgain_ch14_table[priv->cck_present_attentuation].ccktxbb_valuearray[0] + + TempVal = priv->cck_txbbgain_ch14_table[priv->cck_present_attentuation].ccktxbb_valuearray[0] + (priv->cck_txbbgain_ch14_table[priv->cck_present_attentuation].ccktxbb_valuearray[1]<<8) ; rtl8192_setBBreg(dev, rCCK0_TxFilter1,bMaskHWord, TempVal); //Write 0xa24 ~ 0xa27 TempVal = 0; - TempVal = priv->cck_txbbgain_ch14_table[priv->cck_present_attentuation].ccktxbb_valuearray[2] + + TempVal = priv->cck_txbbgain_ch14_table[priv->cck_present_attentuation].ccktxbb_valuearray[2] + (priv->cck_txbbgain_ch14_table[priv->cck_present_attentuation].ccktxbb_valuearray[3]<<8) + (priv->cck_txbbgain_ch14_table[priv->cck_present_attentuation].ccktxbb_valuearray[4]<<16 )+ (priv->cck_txbbgain_ch14_table[priv->cck_present_attentuation].ccktxbb_valuearray[5]<<24); rtl8192_setBBreg(dev, rCCK0_TxFilter2,bMaskDWord, TempVal); //Write 0xa28 0xa29 TempVal = 0; - TempVal = priv->cck_txbbgain_ch14_table[priv->cck_present_attentuation].ccktxbb_valuearray[6] + + TempVal = priv->cck_txbbgain_ch14_table[priv->cck_present_attentuation].ccktxbb_valuearray[6] + (priv->cck_txbbgain_ch14_table[priv->cck_present_attentuation].ccktxbb_valuearray[7]<<8) ; rtl8192_setBBreg(dev, rCCK0_DebugPort,bMaskLWord, TempVal); @@ -1615,14 +1615,14 @@ static void dm_CCKTxPowerAdjust_ThermalMeter(struct net_device *dev, bool bInCH if(!bInCH14) { //Write 0xa22 0xa23 - TempVal = CCKSwingTable_Ch1_Ch13[priv->CCK_index][0] + + TempVal = CCKSwingTable_Ch1_Ch13[priv->CCK_index][0] + (CCKSwingTable_Ch1_Ch13[priv->CCK_index][1]<<8) ; rtl8192_setBBreg(dev, rCCK0_TxFilter1, bMaskHWord, TempVal); RT_TRACE(COMP_POWER_TRACKING, "CCK not chnl 14, reg 0x%x = 0x%x\n", rCCK0_TxFilter1, TempVal); //Write 0xa24 ~ 0xa27 TempVal = 0; - TempVal = CCKSwingTable_Ch1_Ch13[priv->CCK_index][2] + + TempVal = CCKSwingTable_Ch1_Ch13[priv->CCK_index][2] + (CCKSwingTable_Ch1_Ch13[priv->CCK_index][3]<<8) + (CCKSwingTable_Ch1_Ch13[priv->CCK_index][4]<<16 )+ (CCKSwingTable_Ch1_Ch13[priv->CCK_index][5]<<24); @@ -1631,7 +1631,7 @@ static void dm_CCKTxPowerAdjust_ThermalMeter(struct net_device *dev, bool bInCH rCCK0_TxFilter2, TempVal); //Write 0xa28 0xa29 TempVal = 0; - TempVal = CCKSwingTable_Ch1_Ch13[priv->CCK_index][6] + + TempVal = CCKSwingTable_Ch1_Ch13[priv->CCK_index][6] + (CCKSwingTable_Ch1_Ch13[priv->CCK_index][7]<<8) ; rtl8192_setBBreg(dev, rCCK0_DebugPort, bMaskLWord, TempVal); @@ -1642,7 +1642,7 @@ static void dm_CCKTxPowerAdjust_ThermalMeter(struct net_device *dev, bool bInCH { // priv->CCKTxPowerAdjustCntNotCh14++; //cosa add for debug. //Write 0xa22 0xa23 - TempVal = CCKSwingTable_Ch14[priv->CCK_index][0] + + TempVal = CCKSwingTable_Ch14[priv->CCK_index][0] + (CCKSwingTable_Ch14[priv->CCK_index][1]<<8) ; rtl8192_setBBreg(dev, rCCK0_TxFilter1, bMaskHWord, TempVal); @@ -1650,7 +1650,7 @@ static void dm_CCKTxPowerAdjust_ThermalMeter(struct net_device *dev, bool bInCH rCCK0_TxFilter1, TempVal); //Write 0xa24 ~ 0xa27 TempVal = 0; - TempVal = CCKSwingTable_Ch14[priv->CCK_index][2] + + TempVal = CCKSwingTable_Ch14[priv->CCK_index][2] + (CCKSwingTable_Ch14[priv->CCK_index][3]<<8) + (CCKSwingTable_Ch14[priv->CCK_index][4]<<16 )+ (CCKSwingTable_Ch14[priv->CCK_index][5]<<24); @@ -1659,7 +1659,7 @@ static void dm_CCKTxPowerAdjust_ThermalMeter(struct net_device *dev, bool bInCH rCCK0_TxFilter2, TempVal); //Write 0xa28 0xa29 TempVal = 0; - TempVal = CCKSwingTable_Ch14[priv->CCK_index][6] + + TempVal = CCKSwingTable_Ch14[priv->CCK_index][6] + (CCKSwingTable_Ch14[priv->CCK_index][7]<<8) ; rtl8192_setBBreg(dev, rCCK0_DebugPort, bMaskLWord, TempVal); @@ -1713,7 +1713,7 @@ static void dm_txpower_reset_recovery( extern void dm_restore_dynamic_mechanism_state(struct net_device *dev) { struct r8192_priv *priv = ieee80211_priv(dev); - u32 reg_ratr = priv->rate_adaptive.last_ratr; + u32 reg_ratr = priv->rate_adaptive.last_ratr; if(!priv->up) { @@ -1934,7 +1934,7 @@ dm_change_rxpath_selection_setting( s32 DM_Value) { struct r8192_priv *priv = ieee80211_priv(dev); - prate_adaptive pRA = (prate_adaptive)&(priv->rate_adaptive); + prate_adaptive pRA = (prate_adaptive)&(priv->rate_adaptive); if(DM_Type == 0) @@ -2036,8 +2036,8 @@ static void dm_dig_init(struct net_device *dev) dm_digtable.dig_highpwr_state = DM_STA_DIG_MAX; dm_digtable.initialgain_lowerbound_state = false; - dm_digtable.rssi_low_thresh = DM_DIG_THRESH_LOW; - dm_digtable.rssi_high_thresh = DM_DIG_THRESH_HIGH; + dm_digtable.rssi_low_thresh = DM_DIG_THRESH_LOW; + dm_digtable.rssi_high_thresh = DM_DIG_THRESH_HIGH; dm_digtable.rssi_high_power_lowthresh = DM_DIG_HIGH_PWR_THRESH_LOW; dm_digtable.rssi_high_power_highthresh = DM_DIG_HIGH_PWR_THRESH_HIGH; @@ -2091,7 +2091,7 @@ static void dm_ctrl_initgain_byrssi_by_driverrssi( { struct r8192_priv *priv = ieee80211_priv(dev); u8 i; - static u8 fw_dig=0; + static u8 fw_dig=0; if (dm_digtable.dig_enable_flag == false) return; @@ -2871,7 +2871,7 @@ static void dm_check_rfctrl_gpio(struct net_device * dev) * * Revised History: * When Who Remark - * 05/28/2008 amy Create Version 0 porting from windows code. + * 05/28/2008 amy Create Version 0 porting from windows code. * *---------------------------------------------------------------------------*/ static void dm_check_pbc_gpio(struct net_device *dev) @@ -3517,8 +3517,8 @@ static void dm_EndSWFsync(struct net_device *dev) static void dm_StartSWFsync(struct net_device *dev) { struct r8192_priv *priv = ieee80211_priv(dev); - u32 rateIndex; - u32 rateBitmap; + u32 rateIndex; + u32 rateBitmap; RT_TRACE(COMP_HALDM,"%s\n", __FUNCTION__); // Initial rate record to zero, start to record. @@ -3569,7 +3569,7 @@ void dm_check_fsync(struct net_device *dev) #define RegC38_NonFsync_Other_AP 1 #define RegC38_Fsync_AP_BCM 2 struct r8192_priv *priv = ieee80211_priv(dev); - //u32 framesyncC34; + //u32 framesyncC34; static u8 reg_c38_State=RegC38_Default; static u32 reset_cnt=0; @@ -3887,4 +3887,3 @@ static void dm_send_rssi_tofw(struct net_device *dev) } /*---------------------------Define function prototype------------------------*/ - diff --git a/drivers/staging/rtl8192u/r8192U_dm.h b/drivers/staging/rtl8192u/r8192U_dm.h index 3ceb59b9eca7..8a96e9fe891d 100644 --- a/drivers/staging/rtl8192u/r8192U_dm.h +++ b/drivers/staging/rtl8192u/r8192U_dm.h @@ -13,7 +13,7 @@ * * History: * Data Who Remark - * 10/04/2007 MHC Create initial version. + * 10/04/2007 MHC Create initial version. * *****************************************************************************/ /* Check to see if the file has been included already. */ @@ -55,12 +55,12 @@ #define TX_POWER_NEAR_FIELD_THRESH_LOW 62 //added by amy for atheros AP #define TX_POWER_ATHEROAP_THRESH_HIGH 78 -#define TX_POWER_ATHEROAP_THRESH_LOW 72 +#define TX_POWER_ATHEROAP_THRESH_LOW 72 //defined by vivi, for showing on UI -#define Current_Tx_Rate_Reg 0x1b8 -#define Initial_Tx_Rate_Reg 0x1b9 -#define Tx_Retry_Count_Reg 0x1ac +#define Current_Tx_Rate_Reg 0x1b8 +#define Initial_Tx_Rate_Reg 0x1b9 +#define Tx_Retry_Count_Reg 0x1ac #define RegC38_TH 20 /*--------------------------Define Parameters-------------------------------*/ @@ -132,8 +132,8 @@ typedef enum tag_dynamic_init_gain_operation_type_definition DIG_TYPE_PWDB_FACTOR = 8, DIG_TYPE_RX_GAIN_MIN = 9, DIG_TYPE_RX_GAIN_MAX = 10, - DIG_TYPE_ENABLE = 20, - DIG_TYPE_DISABLE = 30, + DIG_TYPE_ENABLE = 20, + DIG_TYPE_DISABLE = 30, DIG_OP_TYPE_MAX }dm_dig_op_e; @@ -251,4 +251,3 @@ extern void dm_initialize_txpower_tracking(struct net_device *dev); /* End of r8192U_dm.h */ - diff --git a/drivers/staging/rtl8192u/r8192U_hw.h b/drivers/staging/rtl8192u/r8192U_hw.h index 1bfe871dcfb2..15b0423356f8 100644 --- a/drivers/staging/rtl8192u/r8192U_hw.h +++ b/drivers/staging/rtl8192u/r8192U_hw.h @@ -122,7 +122,7 @@ enum _RTL8192Usb_HW { SIFS = 0x03E, // SIFS register TCR = 0x040, // Transmit Configuration Register -#define TCR_MXDMA_2048 7 +#define TCR_MXDMA_2048 7 #define TCR_LRL_OFFSET 0 #define TCR_SRL_OFFSET 8 #define TCR_MXDMA_OFFSET 21 @@ -379,7 +379,7 @@ enum _RTL8192Usb_HW { // IMR_POLL = 0x360, MacBlkCtrl = 0x403, // Mac block on/off control register - EPROM_CMD = 0xfe58, + EPROM_CMD = 0xfe58, #define Cmd9346CR_9356SEL (1<<4) #define EPROM_CMD_RESERVED_MASK (1<<5) #define EPROM_CMD_OPERATING_MODE_SHIFT 6 @@ -392,12 +392,12 @@ enum _RTL8192Usb_HW { #define EPROM_CK_SHIFT 2 #define EPROM_W_SHIFT 1 #define EPROM_R_SHIFT 0 - MAC0 = 0x000, - MAC1 = 0x001, - MAC2 = 0x002, - MAC3 = 0x003, - MAC4 = 0x004, - MAC5 = 0x005, + MAC0 = 0x000, + MAC1 = 0x001, + MAC2 = 0x002, + MAC3 = 0x003, + MAC4 = 0x004, + MAC5 = 0x005, }; //---------------------------------------------------------------------------- diff --git a/drivers/staging/rtl8192u/r8192U_wx.c b/drivers/staging/rtl8192u/r8192U_wx.c index 71f2d2349c38..6df5f75d26fc 100644 --- a/drivers/staging/rtl8192u/r8192U_wx.c +++ b/drivers/staging/rtl8192u/r8192U_wx.c @@ -1021,7 +1021,7 @@ static int dummy(struct net_device *dev, struct iw_request_info *a, static iw_handler r8192_wx_handlers[] = { NULL, /* SIOCSIWCOMMIT */ - r8192_wx_get_name, /* SIOCGIWNAME */ + r8192_wx_get_name, /* SIOCGIWNAME */ dummy, /* SIOCSIWNWID */ dummy, /* SIOCGIWNWID */ r8192_wx_set_freq, /* SIOCSIWFREQ */ @@ -1040,7 +1040,7 @@ static iw_handler r8192_wx_handlers[] = dummy, /* SIOCGIWSPY */ NULL, /* SIOCGIWTHRSPY */ NULL, /* SIOCWIWTHRSPY */ - r8192_wx_set_wap, /* SIOCSIWAP */ + r8192_wx_set_wap, /* SIOCSIWAP */ r8192_wx_get_wap, /* SIOCGIWAP */ #if (WIRELESS_EXT >= 18) r8192_wx_set_mlme, /* MLME-- */ @@ -1071,23 +1071,23 @@ static iw_handler r8192_wx_handlers[] = r8192_wx_set_power, /* SIOCSIWPOWER */ r8192_wx_get_power, /* SIOCGIWPOWER */ NULL, /*---hole---*/ - NULL, /*---hole---*/ - r8192_wx_set_gen_ie,//NULL, /* SIOCSIWGENIE */ - NULL, /* SIOCSIWGENIE */ + NULL, /*---hole---*/ + r8192_wx_set_gen_ie,//NULL, /* SIOCSIWGENIE */ + NULL, /* SIOCSIWGENIE */ #if (WIRELESS_EXT >= 18) - r8192_wx_set_auth,//NULL, /* SIOCSIWAUTH */ - NULL,//r8192_wx_get_auth,//NULL, /* SIOCSIWAUTH */ - r8192_wx_set_enc_ext, /* SIOCSIWENCODEEXT */ - NULL,//r8192_wx_get_enc_ext,//NULL, /* SIOCSIWENCODEEXT */ + r8192_wx_set_auth,//NULL, /* SIOCSIWAUTH */ + NULL,//r8192_wx_get_auth,//NULL, /* SIOCSIWAUTH */ + r8192_wx_set_enc_ext, /* SIOCSIWENCODEEXT */ + NULL,//r8192_wx_get_enc_ext,//NULL, /* SIOCSIWENCODEEXT */ #else NULL, NULL, NULL, NULL, #endif - NULL, /* SIOCSIWPMKSA */ - NULL, /*---hole---*/ + NULL, /* SIOCSIWPMKSA */ + NULL, /*---hole---*/ }; diff --git a/drivers/staging/rtl8192u/r819xU_HTGen.h b/drivers/staging/rtl8192u/r819xU_HTGen.h index f37b6d69b404..6a4678f7da5f 100644 --- a/drivers/staging/rtl8192u/r819xU_HTGen.h +++ b/drivers/staging/rtl8192u/r819xU_HTGen.h @@ -10,4 +10,3 @@ typedef enum _HT_IOT_ACTION{ HT_IOT_ACT_CDD_FSYNC = 0x00000020, HT_IOT_ACT_PURE_N_MODE = 0x00000040, }HT_IOT_ACTION_E, *PHT_IOT_ACTION_E; - diff --git a/drivers/staging/rtl8192u/r819xU_HTType.h b/drivers/staging/rtl8192u/r819xU_HTType.h index 6c1d05e1e820..19a7bdd1973a 100644 --- a/drivers/staging/rtl8192u/r819xU_HTType.h +++ b/drivers/staging/rtl8192u/r819xU_HTType.h @@ -89,7 +89,7 @@ typedef enum _CHNLOP{ typedef enum _HT_ACTION{ ACT_RECOMMAND_WIDTH = 0, - ACT_MIMO_PWR_SAVE = 1, + ACT_MIMO_PWR_SAVE = 1, ACT_PSMP = 2, ACT_SET_PCO_PHASE = 3, ACT_MIMO_CHL_MEASURE = 4, @@ -367,9 +367,9 @@ typedef struct _BSS_HT{ typedef struct _MIMO_RSSI{ u32 EnableAntenna; u32 AntennaA; - u32 AntennaB; - u32 AntennaC; - u32 AntennaD; + u32 AntennaB; + u32 AntennaC; + u32 AntennaD; u32 Average; }MIMO_RSSI, *PMIMO_RSSI; @@ -388,4 +388,3 @@ typedef struct _FALSE_ALARM_STATISTICS{ #endif //__INC_HTTYPE_H - diff --git a/drivers/staging/rtl8192u/r819xU_cmdpkt.c b/drivers/staging/rtl8192u/r819xU_cmdpkt.c index a8a6dc2c365f..b755eb46341f 100644 --- a/drivers/staging/rtl8192u/r819xU_cmdpkt.c +++ b/drivers/staging/rtl8192u/r819xU_cmdpkt.c @@ -18,7 +18,7 @@ History: Data Who Remark - 05/06/2008 amy Create initial version porting from windows driver. + 05/06/2008 amy Create initial version porting from windows driver. ******************************************************************************/ #include "r8192U.h" @@ -41,7 +41,7 @@ rt_status SendTxCommandPacket( struct net_device *dev, - void* pData, + void* pData, u32 DataLen ) { @@ -106,7 +106,7 @@ SendTxCommandPacket( u32 buffer_len) { - bool rt_status = true; + bool rt_status = true; #ifdef RTL8192U return rt_status; #else @@ -188,7 +188,7 @@ SendTxCommandPacket( * * Overview: * - * Input: PADAPTER pAdapter - . + * Input: PADAPTER pAdapter - . * CMPK_TXFB_T *psTx_FB - . * * Output: NONE @@ -197,7 +197,7 @@ SendTxCommandPacket( * * Revised History: * When Who Remark - * 05/12/2008 amy Create Version 0 porting from windows code. + * 05/12/2008 amy Create Version 0 porting from windows code. * *---------------------------------------------------------------------------*/ static void @@ -289,7 +289,7 @@ cmpk_count_txstatistic( * in the command packet. * * Input: struct net_device * dev - * u8 * pmsg - Msg Ptr of the command packet. + * u8 * pmsg - Msg Ptr of the command packet. * * Output: NONE * @@ -369,7 +369,7 @@ cmdpkt_beacontimerinterrupt_819xusb( * Overview: The function is responsible for extract the message from * firmware. It will contain dedicated info in * ws-07-0063-v06-rtl819x-command-packet-specification-070315.doc. - * Please refer to chapter "Interrupt Status Element". + * Please refer to chapter "Interrupt Status Element". * * Input: struct net_device *dev, * u8* pmsg - Message Pointer of the command packet. @@ -400,8 +400,8 @@ cmpk_handle_interrupt_status( /* It seems that FW use big endian(MIPS) and DRV use little endian in windows OS. So we have to read the content byte by byte or transfer endian type before copy the message copy. */ - //rx_bcn_state.Element_ID = pMsg[0]; - //rx_bcn_state.Length = pMsg[1]; + //rx_bcn_state.Element_ID = pMsg[0]; + //rx_bcn_state.Length = pMsg[1]; rx_intr_status.length = pmsg[1]; if (rx_intr_status.length != (sizeof(cmpk_intr_sta_t) - 2)) { @@ -478,16 +478,16 @@ cmpk_handle_query_config_rx( /* It seems that FW use big endian(MIPS) and DRV use little endian in windows OS. So we have to read the content byte by byte or transfer endian type before copy the message copy. */ - //rx_query_cfg.Element_ID = pMsg[0]; - //rx_query_cfg.Length = pMsg[1]; - rx_query_cfg.cfg_action = (pmsg[4] & 0x80000000)>>31; - rx_query_cfg.cfg_type = (pmsg[4] & 0x60) >> 5; - rx_query_cfg.cfg_size = (pmsg[4] & 0x18) >> 3; - rx_query_cfg.cfg_page = (pmsg[6] & 0x0F) >> 0; - rx_query_cfg.cfg_offset = pmsg[7]; - rx_query_cfg.value = (pmsg[8] << 24) | (pmsg[9] << 16) | + //rx_query_cfg.Element_ID = pMsg[0]; + //rx_query_cfg.Length = pMsg[1]; + rx_query_cfg.cfg_action = (pmsg[4] & 0x80000000)>>31; + rx_query_cfg.cfg_type = (pmsg[4] & 0x60) >> 5; + rx_query_cfg.cfg_size = (pmsg[4] & 0x18) >> 3; + rx_query_cfg.cfg_page = (pmsg[6] & 0x0F) >> 0; + rx_query_cfg.cfg_offset = pmsg[7]; + rx_query_cfg.value = (pmsg[8] << 24) | (pmsg[9] << 16) | (pmsg[10] << 8) | (pmsg[11] << 0); - rx_query_cfg.mask = (pmsg[12] << 24) | (pmsg[13] << 16) | + rx_query_cfg.mask = (pmsg[12] << 24) | (pmsg[13] << 16) | (pmsg[14] << 8) | (pmsg[15] << 0); } /* cmpk_Handle_Query_Config_Rx */ @@ -511,7 +511,7 @@ cmpk_handle_query_config_rx( * *---------------------------------------------------------------------------*/ static void cmpk_count_tx_status( struct net_device *dev, - cmpk_tx_status_t *pstx_status) + cmpk_tx_status_t *pstx_status) { struct r8192_priv *priv = ieee80211_priv(dev); diff --git a/drivers/staging/rtl8192u/r819xU_cmdpkt.h b/drivers/staging/rtl8192u/r819xU_cmdpkt.h index a8855e61b0e5..fbbd27092714 100644 --- a/drivers/staging/rtl8192u/r819xU_cmdpkt.h +++ b/drivers/staging/rtl8192u/r819xU_cmdpkt.h @@ -72,7 +72,7 @@ typedef struct tag_cmd_pkt_set_configuration u8 element_id; /* Command packet type. */ u8 length; /* Command packet length. */ u16 reserve1; /* */ - u8 cfg_reserve1:3; + u8 cfg_reserve1:3; u8 cfg_size:2; /* Configuration info. */ u8 cfg_type:2; /* Configuration info. */ u8 cfg_action:1; /* Configuration info. */ @@ -94,20 +94,20 @@ typedef struct tag_tx_stats_feedback // PJ quick rxcmd 09042007 // For endian transfer --> Driver will not the same as firmware structure. // DW 0 u16 reserve1; - u8 length; // Command packet length - u8 element_id; // Command packet type + u8 length; // Command packet length + u8 element_id; // Command packet type // DW 1 u16 txfail; // Tx Fail count - u16 txok; // Tx ok count + u16 txok; // Tx ok count // DW 2 - u16 txmcok; // tx multicast - u16 txretry; // Tx Retry count + u16 txmcok; // tx multicast + u16 txretry; // Tx Retry count // DW 3 u16 txucok; // tx unicast - u16 txbcok; // tx broadcast + u16 txbcok; // tx broadcast // DW 4 u16 txbcfail; // @@ -135,8 +135,8 @@ typedef struct tag_rx_debug_message_feedback // For endian transfer --> for driver // DW 0 u16 reserve1; - u8 length; // Command packet length - u8 element_id; // Command packet type + u8 length; // Command packet length + u8 element_id; // Command packet type // DW 1-?? // Variable debug message. @@ -148,15 +148,15 @@ typedef struct tag_tx_rate_history { // For endian transfer --> for driver // DW 0 - u8 element_id; // Command packet type - u8 length; // Command packet length + u8 element_id; // Command packet type + u8 length; // Command packet length u16 reserved1; // DW 1-2 CCK rate counter - u16 cck[4]; + u16 cck[4]; // DW 3-6 - u16 ofdm[8]; + u16 ofdm[8]; // DW 7-14 //UINT16 MCS_BW0_SG0[16]; diff --git a/drivers/staging/rtl8192u/r819xU_firmware.c b/drivers/staging/rtl8192u/r819xU_firmware.c index b12d19079798..46b804329847 100644 --- a/drivers/staging/rtl8192u/r819xU_firmware.c +++ b/drivers/staging/rtl8192u/r819xU_firmware.c @@ -2,7 +2,7 @@ * Procedure: Init boot code/firmware code/data session * * Description: This routine will initialize firmware. If any error occurs during the initialization - * process, the routine shall terminate immediately and return fail. + * process, the routine shall terminate immediately and return fail. * NIC driver should call NdisOpenFile only from MiniportInitialize. * * Arguments: The pointer of the adapter @@ -19,7 +19,7 @@ #include void firmware_init_param(struct net_device *dev) { - struct r8192_priv *priv = ieee80211_priv(dev); + struct r8192_priv *priv = ieee80211_priv(dev); rt_firmware *pfirmware = priv->pFirmware; pfirmware->cmdpacket_frag_thresold = GET_COMMAND_PACKET_FRAG_THRESHOLD(MAX_TRANSMIT_BUFFER_SIZE); @@ -32,7 +32,7 @@ void firmware_init_param(struct net_device *dev) bool fw_download_code(struct net_device *dev, u8 *code_virtual_address, u32 buffer_len) { struct r8192_priv *priv = ieee80211_priv(dev); - bool rt_status = true; + bool rt_status = true; u16 frag_threshold; u16 frag_length, frag_offset = 0; //u16 total_size; @@ -241,17 +241,17 @@ CPUCheckFirmwareReady_Fail: bool init_firmware(struct net_device *dev) { - struct r8192_priv *priv = ieee80211_priv(dev); + struct r8192_priv *priv = ieee80211_priv(dev); bool rt_status = TRUE; u32 file_length = 0; u8 *mapped_file = NULL; u32 init_step = 0; opt_rst_type_e rst_opt = OPT_SYSTEM_RESET; - firmware_init_step_e starting_state = FW_INIT_STEP0_BOOT; + firmware_init_step_e starting_state = FW_INIT_STEP0_BOOT; rt_firmware *pfirmware = priv->pFirmware; - const struct firmware *fw_entry; + const struct firmware *fw_entry; const char *fw_name[3] = { "RTL8192U/boot.img", "RTL8192U/main.img", "RTL8192U/data.img"}; @@ -402,4 +402,3 @@ download_firmware_fail: MODULE_FIRMWARE("RTL8192U/boot.img"); MODULE_FIRMWARE("RTL8192U/main.img"); MODULE_FIRMWARE("RTL8192U/data.img"); - diff --git a/drivers/staging/rtl8192u/r819xU_firmware.h b/drivers/staging/rtl8192u/r819xU_firmware.h index a4bceeef33d3..c48c884aa1af 100644 --- a/drivers/staging/rtl8192u/r819xU_firmware.h +++ b/drivers/staging/rtl8192u/r819xU_firmware.h @@ -24,4 +24,3 @@ typedef enum _opt_rst_type{ }opt_rst_type_e; #endif - diff --git a/drivers/staging/rtl8192u/r819xU_phy.c b/drivers/staging/rtl8192u/r819xU_phy.c index dd1954daea2d..2ff851f50e0f 100644 --- a/drivers/staging/rtl8192u/r819xU_phy.c +++ b/drivers/staging/rtl8192u/r819xU_phy.c @@ -124,10 +124,10 @@ static void phy_FwRFSerialWrite( struct net_device* dev, RF90_RADIO_PATH_E /****************************************************************************** *function: This function read register from RF chip * input: net_device dev - * RF90_RADIO_PATH_E eRFPath //radio path of A/B/C/D + * RF90_RADIO_PATH_E eRFPath //radio path of A/B/C/D * u32 Offset //target address to be read * output: none - * return: u32 readback value + * return: u32 readback value * notice: There are three types of serial operations:(1) Software serial write.(2)Hardware LSSI-Low Speed Serial Interface.(3)Hardware HSSI-High speed serial write. Driver here need to implement (1) and (2)---need more spec for this information. * ****************************************************************************/ u32 rtl8192_phy_RFSerialRead(struct net_device* dev, RF90_RADIO_PATH_E eRFPath, u32 Offset) @@ -201,7 +201,7 @@ u32 rtl8192_phy_RFSerialRead(struct net_device* dev, RF90_RADIO_PATH_E eRFPath, /****************************************************************************** *function: This function write data to RF register * input: net_device dev - * RF90_RADIO_PATH_E eRFPath //radio path of A/B/C/D + * RF90_RADIO_PATH_E eRFPath //radio path of A/B/C/D * u32 Offset //target address to be written * u32 Data //The new register data to be written * output: none @@ -283,7 +283,7 @@ void rtl8192_phy_RFSerialWrite(struct net_device* dev, RF90_RADIO_PATH_E eRFPath /****************************************************************************** *function: This function set specific bits to RF register * input: net_device dev - * RF90_RADIO_PATH_E eRFPath //radio path of A/B/C/D + * RF90_RADIO_PATH_E eRFPath //radio path of A/B/C/D * u32 RegAddr //target addr to be modified * u32 BitMask //taget bit pos in the addr to be modified * u32 Data //value to be write @@ -684,8 +684,8 @@ void rtl8192_InitBBRFRegDef(struct net_device* dev) /****************************************************************************** *function: This function is to write register and then readback to make sure whether BB and RF is OK * input: net_device dev - * HW90_BLOCK_E CheckBlock - * RF90_RADIO_PATH_E eRFPath //only used when checkblock is HW90_BLOCK_RF + * HW90_BLOCK_E CheckBlock + * RF90_RADIO_PATH_E eRFPath //only used when checkblock is HW90_BLOCK_RF * output: none * return: return whether BB and RF is ok(0:OK; 1:Fail) * notice: This function may be removed in the ASIC @@ -1015,7 +1015,7 @@ u8 rtl8192_phy_ConfigRFWithHeaderFile(struct net_device* dev, RF90_RADIO_PATH_E /****************************************************************************** *function: This function set Tx Power of the channel * input: struct net_device *dev - * u8 channel + * u8 channel * output: none * return: none * Note: @@ -1052,7 +1052,7 @@ void rtl8192_SetTxPowerLevel(struct net_device *dev, u8 channel) /****************************************************************************** *function: This function set RF state on or off * input: struct net_device *dev - * RT_RF_POWER_STATE eRFPowerState //Power State to set + * RT_RF_POWER_STATE eRFPowerState //Power State to set * output: none * return: none * Note: @@ -1183,10 +1183,10 @@ bool rtl8192_SetRFPowerState(struct net_device *dev, RT_RF_POWER_STATE eRFPowerS /**************************************************************************************** *function: This function set command table variable(struct SwChnlCmd). - * input: SwChnlCmd* CmdTable //table to be set. - * u32 CmdTableIdx //variable index in table to be set - * u32 CmdTableSz //table size. - * SwChnlCmdID CmdID //command ID to set. + * input: SwChnlCmd* CmdTable //table to be set. + * u32 CmdTableIdx //variable index in table to be set + * u32 CmdTableSz //table size. + * SwChnlCmdID CmdID //command ID to set. * u32 Para1 * u32 Para2 * u32 msDelay @@ -1229,10 +1229,10 @@ u8 rtl8192_phy_SetSwChnlCmdArray( /****************************************************************************** *function: This function set channel step by step * input: struct net_device *dev - * u8 channel - * u8* stage //3 stages - * u8* step // - * u32* delay //whether need to delay + * u8 channel + * u8* stage //3 stages + * u8* step // + * u32* delay //whether need to delay * output: store new stage, step and delay for next step(combine with function above) * return: true if finished, false otherwise * Note: Wait for simpler function to replace it //wb @@ -1386,7 +1386,7 @@ u8 rtl8192_phy_SwChnlStepByStep(struct net_device *dev, u8 channel, u8* stage, u /****************************************************************************** *function: This function does actually set channel work * input: struct net_device *dev - * u8 channel + * u8 channel * output: none * return: noin * Note: We should not call this function directly @@ -1427,7 +1427,7 @@ void rtl8192_SwChnl_WorkItem(struct net_device *dev) /****************************************************************************** *function: This function scheduled actual work item to set channel * input: net_device dev - * u8 channel //channel to set + * u8 channel //channel to set * output: none * return: return code show if workitem is scheduled(1:pass, 0:fail) * Note: Delay may be required for RF configuration @@ -1501,12 +1501,12 @@ if (0) //to test current channel from RF reg 0x7. /****************************************************************************** *function: Callback routine of the work item for set bandwidth mode. * input: struct net_device *dev - * HT_CHANNEL_WIDTH Bandwidth //20M or 40M - * HT_EXTCHNL_OFFSET Offset //Upper, Lower, or Don't care + * HT_CHANNEL_WIDTH Bandwidth //20M or 40M + * HT_EXTCHNL_OFFSET Offset //Upper, Lower, or Don't care * output: none * return: none * Note: I doubt whether SetBWModeInProgress flag is necessary as we can - * test whether current work in the queue or not.//do I? + * test whether current work in the queue or not.//do I? * ***************************************************************************/ void rtl8192_SetBWModeWorkItem(struct net_device *dev) { @@ -1649,12 +1649,12 @@ void rtl8192_SetBWModeWorkItem(struct net_device *dev) /****************************************************************************** *function: This function schedules bandwidth switch work. * input: struct net_device *dev - * HT_CHANNEL_WIDTH Bandwidth //20M or 40M - * HT_EXTCHNL_OFFSET Offset //Upper, Lower, or Don't care + * HT_CHANNEL_WIDTH Bandwidth //20M or 40M + * HT_EXTCHNL_OFFSET Offset //Upper, Lower, or Don't care * output: none * return: none * Note: I doubt whether SetBWModeInProgress flag is necessary as we can - * test whether current work in the queue or not.//do I? + * test whether current work in the queue or not.//do I? * ***************************************************************************/ void rtl8192_SetBWMode(struct net_device *dev, HT_CHANNEL_WIDTH Bandwidth, HT_EXTCHNL_OFFSET Offset) { @@ -1770,4 +1770,3 @@ extern void InitialGainOperateWorkItemCallBack(struct work_struct *work) break; } } - diff --git a/drivers/staging/rtl8192u/r819xU_phyreg.h b/drivers/staging/rtl8192u/r819xU_phyreg.h index cca34c05f6a5..64285d6a33f8 100644 --- a/drivers/staging/rtl8192u/r819xU_phyreg.h +++ b/drivers/staging/rtl8192u/r819xU_phyreg.h @@ -6,185 +6,185 @@ //Register //duplicate register due to connection: RF_Mode, TRxRN, NumOf L-STF //page 1 -#define rPMAC_Reset 0x100 -#define rPMAC_TxStart 0x104 -#define rPMAC_TxLegacySIG 0x108 -#define rPMAC_TxHTSIG1 0x10c -#define rPMAC_TxHTSIG2 0x110 -#define rPMAC_PHYDebug 0x114 -#define rPMAC_TxPacketNum 0x118 -#define rPMAC_TxIdle 0x11c -#define rPMAC_TxMACHeader0 0x120 -#define rPMAC_TxMACHeader1 0x124 -#define rPMAC_TxMACHeader2 0x128 -#define rPMAC_TxMACHeader3 0x12c -#define rPMAC_TxMACHeader4 0x130 -#define rPMAC_TxMACHeader5 0x134 -#define rPMAC_TxDataType 0x138 -#define rPMAC_TxRandomSeed 0x13c -#define rPMAC_CCKPLCPPreamble 0x140 -#define rPMAC_CCKPLCPHeader 0x144 -#define rPMAC_CCKCRC16 0x148 -#define rPMAC_OFDMRxCRC32OK 0x170 -#define rPMAC_OFDMRxCRC32Er 0x174 -#define rPMAC_OFDMRxParityEr 0x178 -#define rPMAC_OFDMRxCRC8Er 0x17c -#define rPMAC_CCKCRxRC16Er 0x180 -#define rPMAC_CCKCRxRC32Er 0x184 -#define rPMAC_CCKCRxRC32OK 0x188 -#define rPMAC_TxStatus 0x18c +#define rPMAC_Reset 0x100 +#define rPMAC_TxStart 0x104 +#define rPMAC_TxLegacySIG 0x108 +#define rPMAC_TxHTSIG1 0x10c +#define rPMAC_TxHTSIG2 0x110 +#define rPMAC_PHYDebug 0x114 +#define rPMAC_TxPacketNum 0x118 +#define rPMAC_TxIdle 0x11c +#define rPMAC_TxMACHeader0 0x120 +#define rPMAC_TxMACHeader1 0x124 +#define rPMAC_TxMACHeader2 0x128 +#define rPMAC_TxMACHeader3 0x12c +#define rPMAC_TxMACHeader4 0x130 +#define rPMAC_TxMACHeader5 0x134 +#define rPMAC_TxDataType 0x138 +#define rPMAC_TxRandomSeed 0x13c +#define rPMAC_CCKPLCPPreamble 0x140 +#define rPMAC_CCKPLCPHeader 0x144 +#define rPMAC_CCKCRC16 0x148 +#define rPMAC_OFDMRxCRC32OK 0x170 +#define rPMAC_OFDMRxCRC32Er 0x174 +#define rPMAC_OFDMRxParityEr 0x178 +#define rPMAC_OFDMRxCRC8Er 0x17c +#define rPMAC_CCKCRxRC16Er 0x180 +#define rPMAC_CCKCRxRC32Er 0x184 +#define rPMAC_CCKCRxRC32OK 0x188 +#define rPMAC_TxStatus 0x18c //page8 -#define rFPGA0_RFMOD 0x800 //RF mode & CCK TxSC -#define rFPGA0_TxInfo 0x804 -#define rFPGA0_PSDFunction 0x808 -#define rFPGA0_TxGainStage 0x80c -#define rFPGA0_RFTiming1 0x810 -#define rFPGA0_RFTiming2 0x814 -//#define rFPGA0_XC_RFTiming 0x818 -//#define rFPGA0_XD_RFTiming 0x81c -#define rFPGA0_XA_HSSIParameter1 0x820 -#define rFPGA0_XA_HSSIParameter2 0x824 -#define rFPGA0_XB_HSSIParameter1 0x828 -#define rFPGA0_XB_HSSIParameter2 0x82c -#define rFPGA0_XC_HSSIParameter1 0x830 -#define rFPGA0_XC_HSSIParameter2 0x834 -#define rFPGA0_XD_HSSIParameter1 0x838 -#define rFPGA0_XD_HSSIParameter2 0x83c -#define rFPGA0_XA_LSSIParameter 0x840 -#define rFPGA0_XB_LSSIParameter 0x844 -#define rFPGA0_XC_LSSIParameter 0x848 -#define rFPGA0_XD_LSSIParameter 0x84c -#define rFPGA0_RFWakeUpParameter 0x850 -#define rFPGA0_RFSleepUpParameter 0x854 -#define rFPGA0_XAB_SwitchControl 0x858 -#define rFPGA0_XCD_SwitchControl 0x85c -#define rFPGA0_XA_RFInterfaceOE 0x860 -#define rFPGA0_XB_RFInterfaceOE 0x864 -#define rFPGA0_XC_RFInterfaceOE 0x868 -#define rFPGA0_XD_RFInterfaceOE 0x86c -#define rFPGA0_XAB_RFInterfaceSW 0x870 -#define rFPGA0_XCD_RFInterfaceSW 0x874 -#define rFPGA0_XAB_RFParameter 0x878 -#define rFPGA0_XCD_RFParameter 0x87c -#define rFPGA0_AnalogParameter1 0x880 -#define rFPGA0_AnalogParameter2 0x884 -#define rFPGA0_AnalogParameter3 0x888 -#define rFPGA0_AnalogParameter4 0x88c -#define rFPGA0_XA_LSSIReadBack 0x8a0 -#define rFPGA0_XB_LSSIReadBack 0x8a4 -#define rFPGA0_XC_LSSIReadBack 0x8a8 -#define rFPGA0_XD_LSSIReadBack 0x8ac -#define rFPGA0_PSDReport 0x8b4 -#define rFPGA0_XAB_RFInterfaceRB 0x8e0 -#define rFPGA0_XCD_RFInterfaceRB 0x8e4 +#define rFPGA0_RFMOD 0x800 //RF mode & CCK TxSC +#define rFPGA0_TxInfo 0x804 +#define rFPGA0_PSDFunction 0x808 +#define rFPGA0_TxGainStage 0x80c +#define rFPGA0_RFTiming1 0x810 +#define rFPGA0_RFTiming2 0x814 +//#define rFPGA0_XC_RFTiming 0x818 +//#define rFPGA0_XD_RFTiming 0x81c +#define rFPGA0_XA_HSSIParameter1 0x820 +#define rFPGA0_XA_HSSIParameter2 0x824 +#define rFPGA0_XB_HSSIParameter1 0x828 +#define rFPGA0_XB_HSSIParameter2 0x82c +#define rFPGA0_XC_HSSIParameter1 0x830 +#define rFPGA0_XC_HSSIParameter2 0x834 +#define rFPGA0_XD_HSSIParameter1 0x838 +#define rFPGA0_XD_HSSIParameter2 0x83c +#define rFPGA0_XA_LSSIParameter 0x840 +#define rFPGA0_XB_LSSIParameter 0x844 +#define rFPGA0_XC_LSSIParameter 0x848 +#define rFPGA0_XD_LSSIParameter 0x84c +#define rFPGA0_RFWakeUpParameter 0x850 +#define rFPGA0_RFSleepUpParameter 0x854 +#define rFPGA0_XAB_SwitchControl 0x858 +#define rFPGA0_XCD_SwitchControl 0x85c +#define rFPGA0_XA_RFInterfaceOE 0x860 +#define rFPGA0_XB_RFInterfaceOE 0x864 +#define rFPGA0_XC_RFInterfaceOE 0x868 +#define rFPGA0_XD_RFInterfaceOE 0x86c +#define rFPGA0_XAB_RFInterfaceSW 0x870 +#define rFPGA0_XCD_RFInterfaceSW 0x874 +#define rFPGA0_XAB_RFParameter 0x878 +#define rFPGA0_XCD_RFParameter 0x87c +#define rFPGA0_AnalogParameter1 0x880 +#define rFPGA0_AnalogParameter2 0x884 +#define rFPGA0_AnalogParameter3 0x888 +#define rFPGA0_AnalogParameter4 0x88c +#define rFPGA0_XA_LSSIReadBack 0x8a0 +#define rFPGA0_XB_LSSIReadBack 0x8a4 +#define rFPGA0_XC_LSSIReadBack 0x8a8 +#define rFPGA0_XD_LSSIReadBack 0x8ac +#define rFPGA0_PSDReport 0x8b4 +#define rFPGA0_XAB_RFInterfaceRB 0x8e0 +#define rFPGA0_XCD_RFInterfaceRB 0x8e4 //page 9 -#define rFPGA1_RFMOD 0x900 //RF mode & OFDM TxSC -#define rFPGA1_TxBlock 0x904 -#define rFPGA1_DebugSelect 0x908 -#define rFPGA1_TxInfo 0x90c +#define rFPGA1_RFMOD 0x900 //RF mode & OFDM TxSC +#define rFPGA1_TxBlock 0x904 +#define rFPGA1_DebugSelect 0x908 +#define rFPGA1_TxInfo 0x90c //page a -#define rCCK0_System 0xa00 -#define rCCK0_AFESetting 0xa04 -#define rCCK0_CCA 0xa08 -#define rCCK0_RxAGC1 0xa0c //AGC default value, saturation level -#define rCCK0_RxAGC2 0xa10 //AGC & DAGC -#define rCCK0_RxHP 0xa14 -#define rCCK0_DSPParameter1 0xa18 //Timing recovery & Channel estimation threshold -#define rCCK0_DSPParameter2 0xa1c //SQ threshold -#define rCCK0_TxFilter1 0xa20 -#define rCCK0_TxFilter2 0xa24 -#define rCCK0_DebugPort 0xa28 //debug port and Tx filter3 -#define rCCK0_FalseAlarmReport 0xa2c //0xa2d -#define rCCK0_TRSSIReport 0xa50 -#define rCCK0_RxReport 0xa54 //0xa57 -#define rCCK0_FACounterLower 0xa5c //0xa5b -#define rCCK0_FACounterUpper 0xa58 //0xa5c +#define rCCK0_System 0xa00 +#define rCCK0_AFESetting 0xa04 +#define rCCK0_CCA 0xa08 +#define rCCK0_RxAGC1 0xa0c //AGC default value, saturation level +#define rCCK0_RxAGC2 0xa10 //AGC & DAGC +#define rCCK0_RxHP 0xa14 +#define rCCK0_DSPParameter1 0xa18 //Timing recovery & Channel estimation threshold +#define rCCK0_DSPParameter2 0xa1c //SQ threshold +#define rCCK0_TxFilter1 0xa20 +#define rCCK0_TxFilter2 0xa24 +#define rCCK0_DebugPort 0xa28 //debug port and Tx filter3 +#define rCCK0_FalseAlarmReport 0xa2c //0xa2d +#define rCCK0_TRSSIReport 0xa50 +#define rCCK0_RxReport 0xa54 //0xa57 +#define rCCK0_FACounterLower 0xa5c //0xa5b +#define rCCK0_FACounterUpper 0xa58 //0xa5c //page c -#define rOFDM0_LSTF 0xc00 -#define rOFDM0_TRxPathEnable 0xc04 -#define rOFDM0_TRMuxPar 0xc08 -#define rOFDM0_TRSWIsolation 0xc0c -#define rOFDM0_XARxAFE 0xc10 //RxIQ DC offset, Rx digital filter, DC notch filter -#define rOFDM0_XARxIQImbalance 0xc14 //RxIQ imblance matrix -#define rOFDM0_XBRxAFE 0xc18 -#define rOFDM0_XBRxIQImbalance 0xc1c -#define rOFDM0_XCRxAFE 0xc20 -#define rOFDM0_XCRxIQImbalance 0xc24 -#define rOFDM0_XDRxAFE 0xc28 -#define rOFDM0_XDRxIQImbalance 0xc2c -#define rOFDM0_RxDetector1 0xc30 //PD,BW & SBD -#define rOFDM0_RxDetector2 0xc34 //SBD & Fame Sync. -#define rOFDM0_RxDetector3 0xc38 //Frame Sync. -#define rOFDM0_RxDetector4 0xc3c //PD, SBD, Frame Sync & Short-GI -#define rOFDM0_RxDSP 0xc40 //Rx Sync Path -#define rOFDM0_CFOandDAGC 0xc44 //CFO & DAGC -#define rOFDM0_CCADropThreshold 0xc48 //CCA Drop threshold -#define rOFDM0_ECCAThreshold 0xc4c // energy CCA -#define rOFDM0_XAAGCCore1 0xc50 -#define rOFDM0_XAAGCCore2 0xc54 -#define rOFDM0_XBAGCCore1 0xc58 -#define rOFDM0_XBAGCCore2 0xc5c -#define rOFDM0_XCAGCCore1 0xc60 -#define rOFDM0_XCAGCCore2 0xc64 -#define rOFDM0_XDAGCCore1 0xc68 -#define rOFDM0_XDAGCCore2 0xc6c -#define rOFDM0_AGCParameter1 0xc70 -#define rOFDM0_AGCParameter2 0xc74 -#define rOFDM0_AGCRSSITable 0xc78 -#define rOFDM0_HTSTFAGC 0xc7c -#define rOFDM0_XATxIQImbalance 0xc80 -#define rOFDM0_XATxAFE 0xc84 -#define rOFDM0_XBTxIQImbalance 0xc88 -#define rOFDM0_XBTxAFE 0xc8c -#define rOFDM0_XCTxIQImbalance 0xc90 -#define rOFDM0_XCTxAFE 0xc94 -#define rOFDM0_XDTxIQImbalance 0xc98 -#define rOFDM0_XDTxAFE 0xc9c -#define rOFDM0_RxHPParameter 0xce0 -#define rOFDM0_TxPseudoNoiseWgt 0xce4 -#define rOFDM0_FrameSync 0xcf0 -#define rOFDM0_DFSReport 0xcf4 -#define rOFDM0_TxCoeff1 0xca4 -#define rOFDM0_TxCoeff2 0xca8 -#define rOFDM0_TxCoeff3 0xcac -#define rOFDM0_TxCoeff4 0xcb0 -#define rOFDM0_TxCoeff5 0xcb4 -#define rOFDM0_TxCoeff6 0xcb8 +#define rOFDM0_LSTF 0xc00 +#define rOFDM0_TRxPathEnable 0xc04 +#define rOFDM0_TRMuxPar 0xc08 +#define rOFDM0_TRSWIsolation 0xc0c +#define rOFDM0_XARxAFE 0xc10 //RxIQ DC offset, Rx digital filter, DC notch filter +#define rOFDM0_XARxIQImbalance 0xc14 //RxIQ imblance matrix +#define rOFDM0_XBRxAFE 0xc18 +#define rOFDM0_XBRxIQImbalance 0xc1c +#define rOFDM0_XCRxAFE 0xc20 +#define rOFDM0_XCRxIQImbalance 0xc24 +#define rOFDM0_XDRxAFE 0xc28 +#define rOFDM0_XDRxIQImbalance 0xc2c +#define rOFDM0_RxDetector1 0xc30 //PD,BW & SBD +#define rOFDM0_RxDetector2 0xc34 //SBD & Fame Sync. +#define rOFDM0_RxDetector3 0xc38 //Frame Sync. +#define rOFDM0_RxDetector4 0xc3c //PD, SBD, Frame Sync & Short-GI +#define rOFDM0_RxDSP 0xc40 //Rx Sync Path +#define rOFDM0_CFOandDAGC 0xc44 //CFO & DAGC +#define rOFDM0_CCADropThreshold 0xc48 //CCA Drop threshold +#define rOFDM0_ECCAThreshold 0xc4c // energy CCA +#define rOFDM0_XAAGCCore1 0xc50 +#define rOFDM0_XAAGCCore2 0xc54 +#define rOFDM0_XBAGCCore1 0xc58 +#define rOFDM0_XBAGCCore2 0xc5c +#define rOFDM0_XCAGCCore1 0xc60 +#define rOFDM0_XCAGCCore2 0xc64 +#define rOFDM0_XDAGCCore1 0xc68 +#define rOFDM0_XDAGCCore2 0xc6c +#define rOFDM0_AGCParameter1 0xc70 +#define rOFDM0_AGCParameter2 0xc74 +#define rOFDM0_AGCRSSITable 0xc78 +#define rOFDM0_HTSTFAGC 0xc7c +#define rOFDM0_XATxIQImbalance 0xc80 +#define rOFDM0_XATxAFE 0xc84 +#define rOFDM0_XBTxIQImbalance 0xc88 +#define rOFDM0_XBTxAFE 0xc8c +#define rOFDM0_XCTxIQImbalance 0xc90 +#define rOFDM0_XCTxAFE 0xc94 +#define rOFDM0_XDTxIQImbalance 0xc98 +#define rOFDM0_XDTxAFE 0xc9c +#define rOFDM0_RxHPParameter 0xce0 +#define rOFDM0_TxPseudoNoiseWgt 0xce4 +#define rOFDM0_FrameSync 0xcf0 +#define rOFDM0_DFSReport 0xcf4 +#define rOFDM0_TxCoeff1 0xca4 +#define rOFDM0_TxCoeff2 0xca8 +#define rOFDM0_TxCoeff3 0xcac +#define rOFDM0_TxCoeff4 0xcb0 +#define rOFDM0_TxCoeff5 0xcb4 +#define rOFDM0_TxCoeff6 0xcb8 //page d -#define rOFDM1_LSTF 0xd00 -#define rOFDM1_TRxPathEnable 0xd04 -#define rOFDM1_CFO 0xd08 -#define rOFDM1_CSI1 0xd10 -#define rOFDM1_SBD 0xd14 -#define rOFDM1_CSI2 0xd18 -#define rOFDM1_CFOTracking 0xd2c -#define rOFDM1_TRxMesaure1 0xd34 -#define rOFDM1_IntfDet 0xd3c +#define rOFDM1_LSTF 0xd00 +#define rOFDM1_TRxPathEnable 0xd04 +#define rOFDM1_CFO 0xd08 +#define rOFDM1_CSI1 0xd10 +#define rOFDM1_SBD 0xd14 +#define rOFDM1_CSI2 0xd18 +#define rOFDM1_CFOTracking 0xd2c +#define rOFDM1_TRxMesaure1 0xd34 +#define rOFDM1_IntfDet 0xd3c #define rOFDM1_PseudoNoiseStateAB 0xd50 #define rOFDM1_PseudoNoiseStateCD 0xd54 #define rOFDM1_RxPseudoNoiseWgt 0xd58 -#define rOFDM_PHYCounter1 0xda0 //cca, parity fail -#define rOFDM_PHYCounter2 0xda4 //rate illegal, crc8 fail -#define rOFDM_PHYCounter3 0xda8 //MCS not support -#define rOFDM_ShortCFOAB 0xdac -#define rOFDM_ShortCFOCD 0xdb0 -#define rOFDM_LongCFOAB 0xdb4 -#define rOFDM_LongCFOCD 0xdb8 -#define rOFDM_TailCFOAB 0xdbc -#define rOFDM_TailCFOCD 0xdc0 -#define rOFDM_PWMeasure1 0xdc4 -#define rOFDM_PWMeasure2 0xdc8 -#define rOFDM_BWReport 0xdcc -#define rOFDM_AGCReport 0xdd0 -#define rOFDM_RxSNR 0xdd4 -#define rOFDM_RxEVMCSI 0xdd8 -#define rOFDM_SIGReport 0xddc +#define rOFDM_PHYCounter1 0xda0 //cca, parity fail +#define rOFDM_PHYCounter2 0xda4 //rate illegal, crc8 fail +#define rOFDM_PHYCounter3 0xda8 //MCS not support +#define rOFDM_ShortCFOAB 0xdac +#define rOFDM_ShortCFOCD 0xdb0 +#define rOFDM_LongCFOAB 0xdb4 +#define rOFDM_LongCFOCD 0xdb8 +#define rOFDM_TailCFOAB 0xdbc +#define rOFDM_TailCFOCD 0xdc0 +#define rOFDM_PWMeasure1 0xdc4 +#define rOFDM_PWMeasure2 0xdc8 +#define rOFDM_BWReport 0xdcc +#define rOFDM_AGCReport 0xdd0 +#define rOFDM_RxSNR 0xdd4 +#define rOFDM_RxEVMCSI 0xdd8 +#define rOFDM_SIGReport 0xddc //page e #define rTxAGC_Rate18_06 0xe00 @@ -198,373 +198,373 @@ //RF //Zebra1 -#define rZebra1_HSSIEnable 0x0 -#define rZebra1_TRxEnable1 0x1 -#define rZebra1_TRxEnable2 0x2 -#define rZebra1_AGC 0x4 -#define rZebra1_ChargePump 0x5 -#define rZebra1_Channel 0x7 -#define rZebra1_TxGain 0x8 -#define rZebra1_TxLPF 0x9 -#define rZebra1_RxLPF 0xb -#define rZebra1_RxHPFCorner 0xc +#define rZebra1_HSSIEnable 0x0 +#define rZebra1_TRxEnable1 0x1 +#define rZebra1_TRxEnable2 0x2 +#define rZebra1_AGC 0x4 +#define rZebra1_ChargePump 0x5 +#define rZebra1_Channel 0x7 +#define rZebra1_TxGain 0x8 +#define rZebra1_TxLPF 0x9 +#define rZebra1_RxLPF 0xb +#define rZebra1_RxHPFCorner 0xc //Zebra4 -#define rGlobalCtrl 0 -#define rRTL8256_TxLPF 19 -#define rRTL8256_RxLPF 11 +#define rGlobalCtrl 0 +#define rRTL8256_TxLPF 19 +#define rRTL8256_RxLPF 11 //RTL8258 -#define rRTL8258_TxLPF 0x11 -#define rRTL8258_RxLPF 0x13 -#define rRTL8258_RSSILPF 0xa +#define rRTL8258_TxLPF 0x11 +#define rRTL8258_RxLPF 0x13 +#define rRTL8258_RSSILPF 0xa //Bit Mask //page-1 -#define bBBResetB 0x100 -#define bGlobalResetB 0x200 -#define bOFDMTxStart 0x4 -#define bCCKTxStart 0x8 -#define bCRC32Debug 0x100 -#define bPMACLoopback 0x10 -#define bTxLSIG 0xffffff -#define bOFDMTxRate 0xf -#define bOFDMTxReserved 0x10 -#define bOFDMTxLength 0x1ffe0 -#define bOFDMTxParity 0x20000 -#define bTxHTSIG1 0xffffff -#define bTxHTMCSRate 0x7f -#define bTxHTBW 0x80 -#define bTxHTLength 0xffff00 -#define bTxHTSIG2 0xffffff -#define bTxHTSmoothing 0x1 -#define bTxHTSounding 0x2 -#define bTxHTReserved 0x4 -#define bTxHTAggreation 0x8 -#define bTxHTSTBC 0x30 -#define bTxHTAdvanceCoding 0x40 -#define bTxHTShortGI 0x80 -#define bTxHTNumberHT_LTF 0x300 -#define bTxHTCRC8 0x3fc00 -#define bCounterReset 0x10000 -#define bNumOfOFDMTx 0xffff -#define bNumOfCCKTx 0xffff0000 -#define bTxIdleInterval 0xffff -#define bOFDMService 0xffff0000 -#define bTxMACHeader 0xffffffff -#define bTxDataInit 0xff -#define bTxHTMode 0x100 -#define bTxDataType 0x30000 -#define bTxRandomSeed 0xffffffff -#define bCCKTxPreamble 0x1 -#define bCCKTxSFD 0xffff0000 -#define bCCKTxSIG 0xff -#define bCCKTxService 0xff00 -#define bCCKLengthExt 0x8000 -#define bCCKTxLength 0xffff0000 -#define bCCKTxCRC16 0xffff -#define bCCKTxStatus 0x1 -#define bOFDMTxStatus 0x2 +#define bBBResetB 0x100 +#define bGlobalResetB 0x200 +#define bOFDMTxStart 0x4 +#define bCCKTxStart 0x8 +#define bCRC32Debug 0x100 +#define bPMACLoopback 0x10 +#define bTxLSIG 0xffffff +#define bOFDMTxRate 0xf +#define bOFDMTxReserved 0x10 +#define bOFDMTxLength 0x1ffe0 +#define bOFDMTxParity 0x20000 +#define bTxHTSIG1 0xffffff +#define bTxHTMCSRate 0x7f +#define bTxHTBW 0x80 +#define bTxHTLength 0xffff00 +#define bTxHTSIG2 0xffffff +#define bTxHTSmoothing 0x1 +#define bTxHTSounding 0x2 +#define bTxHTReserved 0x4 +#define bTxHTAggreation 0x8 +#define bTxHTSTBC 0x30 +#define bTxHTAdvanceCoding 0x40 +#define bTxHTShortGI 0x80 +#define bTxHTNumberHT_LTF 0x300 +#define bTxHTCRC8 0x3fc00 +#define bCounterReset 0x10000 +#define bNumOfOFDMTx 0xffff +#define bNumOfCCKTx 0xffff0000 +#define bTxIdleInterval 0xffff +#define bOFDMService 0xffff0000 +#define bTxMACHeader 0xffffffff +#define bTxDataInit 0xff +#define bTxHTMode 0x100 +#define bTxDataType 0x30000 +#define bTxRandomSeed 0xffffffff +#define bCCKTxPreamble 0x1 +#define bCCKTxSFD 0xffff0000 +#define bCCKTxSIG 0xff +#define bCCKTxService 0xff00 +#define bCCKLengthExt 0x8000 +#define bCCKTxLength 0xffff0000 +#define bCCKTxCRC16 0xffff +#define bCCKTxStatus 0x1 +#define bOFDMTxStatus 0x2 //page-8 -#define bRFMOD 0x1 -#define bJapanMode 0x2 -#define bCCKTxSC 0x30 -#define bCCKEn 0x1000000 -#define bOFDMEn 0x2000000 -#define bOFDMRxADCPhase 0x10000 -#define bOFDMTxDACPhase 0x40000 -#define bXATxAGC 0x3f -#define bXBTxAGC 0xf00 -#define bXCTxAGC 0xf000 -#define bXDTxAGC 0xf0000 -#define bPAStart 0xf0000000 -#define bTRStart 0x00f00000 -#define bRFStart 0x0000f000 -#define bBBStart 0x000000f0 -#define bBBCCKStart 0x0000000f -#define bPAEnd 0xf //Reg0x814 -#define bTREnd 0x0f000000 -#define bRFEnd 0x000f0000 -#define bCCAMask 0x000000f0 //T2R -#define bR2RCCAMask 0x00000f00 -#define bHSSI_R2TDelay 0xf8000000 -#define bHSSI_T2RDelay 0xf80000 -#define bContTxHSSI 0x400 //chane gain at continue Tx -#define bIGFromCCK 0x200 -#define bAGCAddress 0x3f -#define bRxHPTx 0x7000 -#define bRxHPT2R 0x38000 -#define bRxHPCCKIni 0xc0000 -#define bAGCTxCode 0xc00000 -#define bAGCRxCode 0x300000 -#define b3WireDataLength 0x800 -#define b3WireAddressLength 0x400 -#define b3WireRFPowerDown 0x1 -//#define bHWSISelect 0x8 -#define b5GPAPEPolarity 0x40000000 -#define b2GPAPEPolarity 0x80000000 -#define bRFSW_TxDefaultAnt 0x3 -#define bRFSW_TxOptionAnt 0x30 -#define bRFSW_RxDefaultAnt 0x300 -#define bRFSW_RxOptionAnt 0x3000 -#define bRFSI_3WireData 0x1 -#define bRFSI_3WireClock 0x2 -#define bRFSI_3WireLoad 0x4 -#define bRFSI_3WireRW 0x8 -#define bRFSI_3Wire 0xf //3-wire total control -#define bRFSI_RFENV 0x10 -#define bRFSI_TRSW 0x20 -#define bRFSI_TRSWB 0x40 -#define bRFSI_ANTSW 0x100 -#define bRFSI_ANTSWB 0x200 -#define bRFSI_PAPE 0x400 -#define bRFSI_PAPE5G 0x800 -#define bBandSelect 0x1 -#define bHTSIG2_GI 0x80 -#define bHTSIG2_Smoothing 0x01 -#define bHTSIG2_Sounding 0x02 -#define bHTSIG2_Aggreaton 0x08 -#define bHTSIG2_STBC 0x30 -#define bHTSIG2_AdvCoding 0x40 -#define bHTSIG2_NumOfHTLTF 0x300 -#define bHTSIG2_CRC8 0x3fc -#define bHTSIG1_MCS 0x7f -#define bHTSIG1_BandWidth 0x80 -#define bHTSIG1_HTLength 0xffff -#define bLSIG_Rate 0xf -#define bLSIG_Reserved 0x10 -#define bLSIG_Length 0x1fffe -#define bLSIG_Parity 0x20 -#define bCCKRxPhase 0x4 -#define bLSSIReadAddress 0x3f000000 //LSSI "Read" Address -#define bLSSIReadEdge 0x80000000 //LSSI "Read" edge signal -#define bLSSIReadBackData 0xfff -#define bLSSIReadOKFlag 0x1000 -#define bCCKSampleRate 0x8 //0: 44MHz, 1:88MHz - -#define bRegulator0Standby 0x1 -#define bRegulatorPLLStandby 0x2 -#define bRegulator1Standby 0x4 -#define bPLLPowerUp 0x8 -#define bDPLLPowerUp 0x10 -#define bDA10PowerUp 0x20 -#define bAD7PowerUp 0x200 -#define bDA6PowerUp 0x2000 -#define bXtalPowerUp 0x4000 -#define b40MDClkPowerUP 0x8000 -#define bDA6DebugMode 0x20000 -#define bDA6Swing 0x380000 -#define bADClkPhase 0x4000000 -#define b80MClkDelay 0x18000000 -#define bAFEWatchDogEnable 0x20000000 -#define bXtalCap 0x0f000000 -#define bIntDifClkEnable 0x400 -#define bExtSigClkEnable 0x800 -#define bBandgapMbiasPowerUp 0x10000 -#define bAD11SHGain 0xc0000 -#define bAD11InputRange 0x700000 -#define bAD11OPCurrent 0x3800000 -#define bIPathLoopback 0x4000000 -#define bQPathLoopback 0x8000000 -#define bAFELoopback 0x10000000 -#define bDA10Swing 0x7e0 -#define bDA10Reverse 0x800 -#define bDAClkSource 0x1000 -#define bAD7InputRange 0x6000 -#define bAD7Gain 0x38000 -#define bAD7OutputCMMode 0x40000 -#define bAD7InputCMMode 0x380000 -#define bAD7Current 0xc00000 -#define bRegulatorAdjust 0x7000000 -#define bAD11PowerUpAtTx 0x1 -#define bDA10PSAtTx 0x10 -#define bAD11PowerUpAtRx 0x100 -#define bDA10PSAtRx 0x1000 - -#define bCCKRxAGCFormat 0x200 - -#define bPSDFFTSamplepPoint 0xc000 -#define bPSDAverageNum 0x3000 -#define bIQPathControl 0xc00 -#define bPSDFreq 0x3ff -#define bPSDAntennaPath 0x30 -#define bPSDIQSwitch 0x40 -#define bPSDRxTrigger 0x400000 -#define bPSDTxTrigger 0x80000000 -#define bPSDSineToneScale 0x7f000000 -#define bPSDReport 0xffff +#define bRFMOD 0x1 +#define bJapanMode 0x2 +#define bCCKTxSC 0x30 +#define bCCKEn 0x1000000 +#define bOFDMEn 0x2000000 +#define bOFDMRxADCPhase 0x10000 +#define bOFDMTxDACPhase 0x40000 +#define bXATxAGC 0x3f +#define bXBTxAGC 0xf00 +#define bXCTxAGC 0xf000 +#define bXDTxAGC 0xf0000 +#define bPAStart 0xf0000000 +#define bTRStart 0x00f00000 +#define bRFStart 0x0000f000 +#define bBBStart 0x000000f0 +#define bBBCCKStart 0x0000000f +#define bPAEnd 0xf //Reg0x814 +#define bTREnd 0x0f000000 +#define bRFEnd 0x000f0000 +#define bCCAMask 0x000000f0 //T2R +#define bR2RCCAMask 0x00000f00 +#define bHSSI_R2TDelay 0xf8000000 +#define bHSSI_T2RDelay 0xf80000 +#define bContTxHSSI 0x400 //chane gain at continue Tx +#define bIGFromCCK 0x200 +#define bAGCAddress 0x3f +#define bRxHPTx 0x7000 +#define bRxHPT2R 0x38000 +#define bRxHPCCKIni 0xc0000 +#define bAGCTxCode 0xc00000 +#define bAGCRxCode 0x300000 +#define b3WireDataLength 0x800 +#define b3WireAddressLength 0x400 +#define b3WireRFPowerDown 0x1 +//#define bHWSISelect 0x8 +#define b5GPAPEPolarity 0x40000000 +#define b2GPAPEPolarity 0x80000000 +#define bRFSW_TxDefaultAnt 0x3 +#define bRFSW_TxOptionAnt 0x30 +#define bRFSW_RxDefaultAnt 0x300 +#define bRFSW_RxOptionAnt 0x3000 +#define bRFSI_3WireData 0x1 +#define bRFSI_3WireClock 0x2 +#define bRFSI_3WireLoad 0x4 +#define bRFSI_3WireRW 0x8 +#define bRFSI_3Wire 0xf //3-wire total control +#define bRFSI_RFENV 0x10 +#define bRFSI_TRSW 0x20 +#define bRFSI_TRSWB 0x40 +#define bRFSI_ANTSW 0x100 +#define bRFSI_ANTSWB 0x200 +#define bRFSI_PAPE 0x400 +#define bRFSI_PAPE5G 0x800 +#define bBandSelect 0x1 +#define bHTSIG2_GI 0x80 +#define bHTSIG2_Smoothing 0x01 +#define bHTSIG2_Sounding 0x02 +#define bHTSIG2_Aggreaton 0x08 +#define bHTSIG2_STBC 0x30 +#define bHTSIG2_AdvCoding 0x40 +#define bHTSIG2_NumOfHTLTF 0x300 +#define bHTSIG2_CRC8 0x3fc +#define bHTSIG1_MCS 0x7f +#define bHTSIG1_BandWidth 0x80 +#define bHTSIG1_HTLength 0xffff +#define bLSIG_Rate 0xf +#define bLSIG_Reserved 0x10 +#define bLSIG_Length 0x1fffe +#define bLSIG_Parity 0x20 +#define bCCKRxPhase 0x4 +#define bLSSIReadAddress 0x3f000000 //LSSI "Read" Address +#define bLSSIReadEdge 0x80000000 //LSSI "Read" edge signal +#define bLSSIReadBackData 0xfff +#define bLSSIReadOKFlag 0x1000 +#define bCCKSampleRate 0x8 //0: 44MHz, 1:88MHz + +#define bRegulator0Standby 0x1 +#define bRegulatorPLLStandby 0x2 +#define bRegulator1Standby 0x4 +#define bPLLPowerUp 0x8 +#define bDPLLPowerUp 0x10 +#define bDA10PowerUp 0x20 +#define bAD7PowerUp 0x200 +#define bDA6PowerUp 0x2000 +#define bXtalPowerUp 0x4000 +#define b40MDClkPowerUP 0x8000 +#define bDA6DebugMode 0x20000 +#define bDA6Swing 0x380000 +#define bADClkPhase 0x4000000 +#define b80MClkDelay 0x18000000 +#define bAFEWatchDogEnable 0x20000000 +#define bXtalCap 0x0f000000 +#define bIntDifClkEnable 0x400 +#define bExtSigClkEnable 0x800 +#define bBandgapMbiasPowerUp 0x10000 +#define bAD11SHGain 0xc0000 +#define bAD11InputRange 0x700000 +#define bAD11OPCurrent 0x3800000 +#define bIPathLoopback 0x4000000 +#define bQPathLoopback 0x8000000 +#define bAFELoopback 0x10000000 +#define bDA10Swing 0x7e0 +#define bDA10Reverse 0x800 +#define bDAClkSource 0x1000 +#define bAD7InputRange 0x6000 +#define bAD7Gain 0x38000 +#define bAD7OutputCMMode 0x40000 +#define bAD7InputCMMode 0x380000 +#define bAD7Current 0xc00000 +#define bRegulatorAdjust 0x7000000 +#define bAD11PowerUpAtTx 0x1 +#define bDA10PSAtTx 0x10 +#define bAD11PowerUpAtRx 0x100 +#define bDA10PSAtRx 0x1000 + +#define bCCKRxAGCFormat 0x200 + +#define bPSDFFTSamplepPoint 0xc000 +#define bPSDAverageNum 0x3000 +#define bIQPathControl 0xc00 +#define bPSDFreq 0x3ff +#define bPSDAntennaPath 0x30 +#define bPSDIQSwitch 0x40 +#define bPSDRxTrigger 0x400000 +#define bPSDTxTrigger 0x80000000 +#define bPSDSineToneScale 0x7f000000 +#define bPSDReport 0xffff //page-9 -#define bOFDMTxSC 0x30000000 -#define bCCKTxOn 0x1 -#define bOFDMTxOn 0x2 -#define bDebugPage 0xfff //reset debug page and also HWord, LWord -#define bDebugItem 0xff //reset debug page and LWord -#define bAntL 0x10 -#define bAntNonHT 0x100 -#define bAntHT1 0x1000 -#define bAntHT2 0x10000 -#define bAntHT1S1 0x100000 -#define bAntNonHTS1 0x1000000 +#define bOFDMTxSC 0x30000000 +#define bCCKTxOn 0x1 +#define bOFDMTxOn 0x2 +#define bDebugPage 0xfff //reset debug page and also HWord, LWord +#define bDebugItem 0xff //reset debug page and LWord +#define bAntL 0x10 +#define bAntNonHT 0x100 +#define bAntHT1 0x1000 +#define bAntHT2 0x10000 +#define bAntHT1S1 0x100000 +#define bAntNonHTS1 0x1000000 //page-a -#define bCCKBBMode 0x3 -#define bCCKTxPowerSaving 0x80 -#define bCCKRxPowerSaving 0x40 -#define bCCKSideBand 0x10 -#define bCCKScramble 0x8 -#define bCCKAntDiversity 0x8000 -#define bCCKCarrierRecovery 0x4000 -#define bCCKTxRate 0x3000 -#define bCCKDCCancel 0x0800 -#define bCCKISICancel 0x0400 -#define bCCKMatchFilter 0x0200 -#define bCCKEqualizer 0x0100 -#define bCCKPreambleDetect 0x800000 -#define bCCKFastFalseCCA 0x400000 -#define bCCKChEstStart 0x300000 -#define bCCKCCACount 0x080000 -#define bCCKcs_lim 0x070000 -#define bCCKBistMode 0x80000000 -#define bCCKCCAMask 0x40000000 -#define bCCKTxDACPhase 0x4 -#define bCCKRxADCPhase 0x20000000 //r_rx_clk -#define bCCKr_cp_mode0 0x0100 -#define bCCKTxDCOffset 0xf0 -#define bCCKRxDCOffset 0xf -#define bCCKCCAMode 0xc000 -#define bCCKFalseCS_lim 0x3f00 -#define bCCKCS_ratio 0xc00000 -#define bCCKCorgBit_sel 0x300000 -#define bCCKPD_lim 0x0f0000 -#define bCCKNewCCA 0x80000000 -#define bCCKRxHPofIG 0x8000 -#define bCCKRxIG 0x7f00 -#define bCCKLNAPolarity 0x800000 -#define bCCKRx1stGain 0x7f0000 -#define bCCKRFExtend 0x20000000 //CCK Rx initial gain polarity -#define bCCKRxAGCSatLevel 0x1f000000 -#define bCCKRxAGCSatCount 0xe0 -#define bCCKRxRFSettle 0x1f //AGCsamp_dly -#define bCCKFixedRxAGC 0x8000 -//#define bCCKRxAGCFormat 0x4000 //remove to HSSI register 0x824 -#define bCCKAntennaPolarity 0x2000 -#define bCCKTxFilterType 0x0c00 -#define bCCKRxAGCReportType 0x0300 -#define bCCKRxDAGCEn 0x80000000 -#define bCCKRxDAGCPeriod 0x20000000 -#define bCCKRxDAGCSatLevel 0x1f000000 -#define bCCKTimingRecovery 0x800000 -#define bCCKTxC0 0x3f0000 -#define bCCKTxC1 0x3f000000 -#define bCCKTxC2 0x3f -#define bCCKTxC3 0x3f00 -#define bCCKTxC4 0x3f0000 -#define bCCKTxC5 0x3f000000 -#define bCCKTxC6 0x3f -#define bCCKTxC7 0x3f00 -#define bCCKDebugPort 0xff0000 -#define bCCKDACDebug 0x0f000000 -#define bCCKFalseAlarmEnable 0x8000 -#define bCCKFalseAlarmRead 0x4000 -#define bCCKTRSSI 0x7f -#define bCCKRxAGCReport 0xfe -#define bCCKRxReport_AntSel 0x80000000 -#define bCCKRxReport_MFOff 0x40000000 -#define bCCKRxRxReport_SQLoss 0x20000000 -#define bCCKRxReport_Pktloss 0x10000000 -#define bCCKRxReport_Lockedbit 0x08000000 -#define bCCKRxReport_RateError 0x04000000 -#define bCCKRxReport_RxRate 0x03000000 -#define bCCKRxFACounterLower 0xff -#define bCCKRxFACounterUpper 0xff000000 -#define bCCKRxHPAGCStart 0xe000 -#define bCCKRxHPAGCFinal 0x1c00 - -#define bCCKRxFalseAlarmEnable 0x8000 -#define bCCKFACounterFreeze 0x4000 - -#define bCCKTxPathSel 0x10000000 -#define bCCKDefaultRxPath 0xc000000 -#define bCCKOptionRxPath 0x3000000 +#define bCCKBBMode 0x3 +#define bCCKTxPowerSaving 0x80 +#define bCCKRxPowerSaving 0x40 +#define bCCKSideBand 0x10 +#define bCCKScramble 0x8 +#define bCCKAntDiversity 0x8000 +#define bCCKCarrierRecovery 0x4000 +#define bCCKTxRate 0x3000 +#define bCCKDCCancel 0x0800 +#define bCCKISICancel 0x0400 +#define bCCKMatchFilter 0x0200 +#define bCCKEqualizer 0x0100 +#define bCCKPreambleDetect 0x800000 +#define bCCKFastFalseCCA 0x400000 +#define bCCKChEstStart 0x300000 +#define bCCKCCACount 0x080000 +#define bCCKcs_lim 0x070000 +#define bCCKBistMode 0x80000000 +#define bCCKCCAMask 0x40000000 +#define bCCKTxDACPhase 0x4 +#define bCCKRxADCPhase 0x20000000 //r_rx_clk +#define bCCKr_cp_mode0 0x0100 +#define bCCKTxDCOffset 0xf0 +#define bCCKRxDCOffset 0xf +#define bCCKCCAMode 0xc000 +#define bCCKFalseCS_lim 0x3f00 +#define bCCKCS_ratio 0xc00000 +#define bCCKCorgBit_sel 0x300000 +#define bCCKPD_lim 0x0f0000 +#define bCCKNewCCA 0x80000000 +#define bCCKRxHPofIG 0x8000 +#define bCCKRxIG 0x7f00 +#define bCCKLNAPolarity 0x800000 +#define bCCKRx1stGain 0x7f0000 +#define bCCKRFExtend 0x20000000 //CCK Rx initial gain polarity +#define bCCKRxAGCSatLevel 0x1f000000 +#define bCCKRxAGCSatCount 0xe0 +#define bCCKRxRFSettle 0x1f //AGCsamp_dly +#define bCCKFixedRxAGC 0x8000 +//#define bCCKRxAGCFormat 0x4000 //remove to HSSI register 0x824 +#define bCCKAntennaPolarity 0x2000 +#define bCCKTxFilterType 0x0c00 +#define bCCKRxAGCReportType 0x0300 +#define bCCKRxDAGCEn 0x80000000 +#define bCCKRxDAGCPeriod 0x20000000 +#define bCCKRxDAGCSatLevel 0x1f000000 +#define bCCKTimingRecovery 0x800000 +#define bCCKTxC0 0x3f0000 +#define bCCKTxC1 0x3f000000 +#define bCCKTxC2 0x3f +#define bCCKTxC3 0x3f00 +#define bCCKTxC4 0x3f0000 +#define bCCKTxC5 0x3f000000 +#define bCCKTxC6 0x3f +#define bCCKTxC7 0x3f00 +#define bCCKDebugPort 0xff0000 +#define bCCKDACDebug 0x0f000000 +#define bCCKFalseAlarmEnable 0x8000 +#define bCCKFalseAlarmRead 0x4000 +#define bCCKTRSSI 0x7f +#define bCCKRxAGCReport 0xfe +#define bCCKRxReport_AntSel 0x80000000 +#define bCCKRxReport_MFOff 0x40000000 +#define bCCKRxRxReport_SQLoss 0x20000000 +#define bCCKRxReport_Pktloss 0x10000000 +#define bCCKRxReport_Lockedbit 0x08000000 +#define bCCKRxReport_RateError 0x04000000 +#define bCCKRxReport_RxRate 0x03000000 +#define bCCKRxFACounterLower 0xff +#define bCCKRxFACounterUpper 0xff000000 +#define bCCKRxHPAGCStart 0xe000 +#define bCCKRxHPAGCFinal 0x1c00 + +#define bCCKRxFalseAlarmEnable 0x8000 +#define bCCKFACounterFreeze 0x4000 + +#define bCCKTxPathSel 0x10000000 +#define bCCKDefaultRxPath 0xc000000 +#define bCCKOptionRxPath 0x3000000 //page c -#define bNumOfSTF 0x3 -#define bShift_L 0xc0 -#define bGI_TH 0xc -#define bRxPathA 0x1 -#define bRxPathB 0x2 -#define bRxPathC 0x4 -#define bRxPathD 0x8 -#define bTxPathA 0x1 -#define bTxPathB 0x2 -#define bTxPathC 0x4 -#define bTxPathD 0x8 -#define bTRSSIFreq 0x200 -#define bADCBackoff 0x3000 -#define bDFIRBackoff 0xc000 -#define bTRSSILatchPhase 0x10000 -#define bRxIDCOffset 0xff -#define bRxQDCOffset 0xff00 -#define bRxDFIRMode 0x1800000 -#define bRxDCNFType 0xe000000 -#define bRXIQImb_A 0x3ff -#define bRXIQImb_B 0xfc00 -#define bRXIQImb_C 0x3f0000 -#define bRXIQImb_D 0xffc00000 -#define bDC_dc_Notch 0x60000 -#define bRxNBINotch 0x1f000000 -#define bPD_TH 0xf -#define bPD_TH_Opt2 0xc000 -#define bPWED_TH 0x700 -#define bIfMF_Win_L 0x800 -#define bPD_Option 0x1000 -#define bMF_Win_L 0xe000 -#define bBW_Search_L 0x30000 -#define bwin_enh_L 0xc0000 -#define bBW_TH 0x700000 -#define bED_TH2 0x3800000 -#define bBW_option 0x4000000 -#define bRatio_TH 0x18000000 -#define bWindow_L 0xe0000000 -#define bSBD_Option 0x1 -#define bFrame_TH 0x1c -#define bFS_Option 0x60 -#define bDC_Slope_check 0x80 -#define bFGuard_Counter_DC_L 0xe00 -#define bFrame_Weight_Short 0x7000 -#define bSub_Tune 0xe00000 -#define bFrame_DC_Length 0xe000000 -#define bSBD_start_offset 0x30000000 -#define bFrame_TH_2 0x7 -#define bFrame_GI2_TH 0x38 -#define bGI2_Sync_en 0x40 -#define bSarch_Short_Early 0x300 -#define bSarch_Short_Late 0xc00 -#define bSarch_GI2_Late 0x70000 -#define bCFOAntSum 0x1 -#define bCFOAcc 0x2 -#define bCFOStartOffset 0xc -#define bCFOLookBack 0x70 -#define bCFOSumWeight 0x80 -#define bDAGCEnable 0x10000 -#define bTXIQImb_A 0x3ff -#define bTXIQImb_B 0xfc00 -#define bTXIQImb_C 0x3f0000 -#define bTXIQImb_D 0xffc00000 -#define bTxIDCOffset 0xff -#define bTxQDCOffset 0xff00 -#define bTxDFIRMode 0x10000 -#define bTxPesudoNoiseOn 0x4000000 -#define bTxPesudoNoise_A 0xff -#define bTxPesudoNoise_B 0xff00 -#define bTxPesudoNoise_C 0xff0000 -#define bTxPesudoNoise_D 0xff000000 -#define bCCADropOption 0x20000 -#define bCCADropThres 0xfff00000 -#define bEDCCA_H 0xf -#define bEDCCA_L 0xf0 +#define bNumOfSTF 0x3 +#define bShift_L 0xc0 +#define bGI_TH 0xc +#define bRxPathA 0x1 +#define bRxPathB 0x2 +#define bRxPathC 0x4 +#define bRxPathD 0x8 +#define bTxPathA 0x1 +#define bTxPathB 0x2 +#define bTxPathC 0x4 +#define bTxPathD 0x8 +#define bTRSSIFreq 0x200 +#define bADCBackoff 0x3000 +#define bDFIRBackoff 0xc000 +#define bTRSSILatchPhase 0x10000 +#define bRxIDCOffset 0xff +#define bRxQDCOffset 0xff00 +#define bRxDFIRMode 0x1800000 +#define bRxDCNFType 0xe000000 +#define bRXIQImb_A 0x3ff +#define bRXIQImb_B 0xfc00 +#define bRXIQImb_C 0x3f0000 +#define bRXIQImb_D 0xffc00000 +#define bDC_dc_Notch 0x60000 +#define bRxNBINotch 0x1f000000 +#define bPD_TH 0xf +#define bPD_TH_Opt2 0xc000 +#define bPWED_TH 0x700 +#define bIfMF_Win_L 0x800 +#define bPD_Option 0x1000 +#define bMF_Win_L 0xe000 +#define bBW_Search_L 0x30000 +#define bwin_enh_L 0xc0000 +#define bBW_TH 0x700000 +#define bED_TH2 0x3800000 +#define bBW_option 0x4000000 +#define bRatio_TH 0x18000000 +#define bWindow_L 0xe0000000 +#define bSBD_Option 0x1 +#define bFrame_TH 0x1c +#define bFS_Option 0x60 +#define bDC_Slope_check 0x80 +#define bFGuard_Counter_DC_L 0xe00 +#define bFrame_Weight_Short 0x7000 +#define bSub_Tune 0xe00000 +#define bFrame_DC_Length 0xe000000 +#define bSBD_start_offset 0x30000000 +#define bFrame_TH_2 0x7 +#define bFrame_GI2_TH 0x38 +#define bGI2_Sync_en 0x40 +#define bSarch_Short_Early 0x300 +#define bSarch_Short_Late 0xc00 +#define bSarch_GI2_Late 0x70000 +#define bCFOAntSum 0x1 +#define bCFOAcc 0x2 +#define bCFOStartOffset 0xc +#define bCFOLookBack 0x70 +#define bCFOSumWeight 0x80 +#define bDAGCEnable 0x10000 +#define bTXIQImb_A 0x3ff +#define bTXIQImb_B 0xfc00 +#define bTXIQImb_C 0x3f0000 +#define bTXIQImb_D 0xffc00000 +#define bTxIDCOffset 0xff +#define bTxQDCOffset 0xff00 +#define bTxDFIRMode 0x10000 +#define bTxPesudoNoiseOn 0x4000000 +#define bTxPesudoNoise_A 0xff +#define bTxPesudoNoise_B 0xff00 +#define bTxPesudoNoise_C 0xff0000 +#define bTxPesudoNoise_D 0xff000000 +#define bCCADropOption 0x20000 +#define bCCADropThres 0xfff00000 +#define bEDCCA_H 0xf +#define bEDCCA_L 0xf0 #define bLambda_ED 0x300 #define bRxInitialGain 0x7f #define bRxAntDivEn 0x80 @@ -862,10 +862,10 @@ #define PathD 0x3 #define rRTL8256RxMixerPole 0xb -#define bZebraRxMixerPole 0x6 -#define rRTL8256TxBBOPBias 0x9 -#define bRTL8256TxBBOPBias 0x400 -#define rRTL8256TxBBBW 19 -#define bRTL8256TxBBBW 0x18 +#define bZebraRxMixerPole 0x6 +#define rRTL8256TxBBOPBias 0x9 +#define bRTL8256TxBBOPBias 0x400 +#define rRTL8256TxBBBW 19 +#define bRTL8256TxBBBW 0x18 #endif //__INC_HAL8190PCIPHYREG_H -- 2.20.1