From 34222e0a7b7328fab421c5a0926896378a3eb3fd Mon Sep 17 00:00:00 2001 From: Pekka Enberg Date: Wed, 22 Oct 2008 19:07:03 +0300 Subject: [PATCH] Staging: w35und: use msleep() and udelay() This patch removes the OS_SLEEP() wrapper and changes the call-sites to use msleep() and udelay() where appropriate. Signed-off-by: Pekka Enberg Acked-by: Pavel Machek Signed-off-by: Greg Kroah-Hartman --- drivers/staging/winbond/linux/wb35reg.c | 8 +-- drivers/staging/winbond/linux/wb35rx.c | 4 +- drivers/staging/winbond/linux/wb35tx.c | 4 +- drivers/staging/winbond/linux/wbusb_s.h | 4 -- drivers/staging/winbond/phy_calibration.c | 10 ++-- drivers/staging/winbond/reg.c | 66 +++++++++++------------ drivers/staging/winbond/wbhal.c | 2 +- drivers/staging/winbond/wblinux.c | 4 +- 8 files changed, 49 insertions(+), 53 deletions(-) diff --git a/drivers/staging/winbond/linux/wb35reg.c b/drivers/staging/winbond/linux/wb35reg.c index ebb6db5438a4..de4040bb762c 100644 --- a/drivers/staging/winbond/linux/wb35reg.c +++ b/drivers/staging/winbond/linux/wb35reg.c @@ -131,7 +131,7 @@ Wb35Reg_WriteSync( phw_data_t pHwData, u16 RegisterNo, u32 RegisterValue ) // 20060717.5 Wait until EP0VM stop while (pWb35Reg->EP0vm_state != VM_STOP) - OS_SLEEP(10000); + msleep(10); // Sync IoCallDriver pWb35Reg->EP0vm_state = VM_RUNNING; @@ -294,7 +294,7 @@ Wb35Reg_ReadSync( phw_data_t pHwData, u16 RegisterNo, u32 * pRegisterValue ) // 20060717.5 Wait until EP0VM stop while (pWb35Reg->EP0vm_state != VM_STOP) - OS_SLEEP(10000); + msleep(10); pWb35Reg->EP0vm_state = VM_RUNNING; ret = usb_control_msg( pHwData->WbUsb.udev, @@ -508,9 +508,9 @@ Wb35Reg_destroy(phw_data_t pHwData) // Wait for Reg operation completed do { - OS_SLEEP(10000); // Delay for waiting function enter 940623.1.a + msleep(10); // Delay for waiting function enter 940623.1.a } while (pWb35Reg->EP0vm_state != VM_STOP); - OS_SLEEP(10000); // Delay for waiting function enter 940623.1.b + msleep(10); // Delay for waiting function enter 940623.1.b // Release all the data in RegQueue spin_lock_irq( &pWb35Reg->EP0VM_spin_lock ); diff --git a/drivers/staging/winbond/linux/wb35rx.c b/drivers/staging/winbond/linux/wb35rx.c index b4b9f5f371d9..545c61070911 100644 --- a/drivers/staging/winbond/linux/wb35rx.c +++ b/drivers/staging/winbond/linux/wb35rx.c @@ -191,9 +191,9 @@ void Wb35Rx_destroy(phw_data_t pHwData) PWB35RX pWb35Rx = &pHwData->Wb35Rx; do { - OS_SLEEP(10000); // Delay for waiting function enter 940623.1.a + msleep(10); // Delay for waiting function enter 940623.1.a } while (pWb35Rx->EP3vm_state != VM_STOP); - OS_SLEEP(10000); // Delay for waiting function exit 940623.1.b + msleep(10); // Delay for waiting function exit 940623.1.b if (pWb35Rx->RxUrb) usb_free_urb( pWb35Rx->RxUrb ); diff --git a/drivers/staging/winbond/linux/wb35tx.c b/drivers/staging/winbond/linux/wb35tx.c index ba9d51244e29..6687051b29c8 100644 --- a/drivers/staging/winbond/linux/wb35tx.c +++ b/drivers/staging/winbond/linux/wb35tx.c @@ -175,9 +175,9 @@ void Wb35Tx_destroy(phw_data_t pHwData) // Wait for VM stop do { - OS_SLEEP(10000); // Delay for waiting function enter 940623.1.a + msleep(10); // Delay for waiting function enter 940623.1.a } while( (pWb35Tx->EP2vm_state != VM_STOP) && (pWb35Tx->EP4vm_state != VM_STOP) ); - OS_SLEEP(10000); // Delay for waiting function enter 940623.1.b + msleep(10); // Delay for waiting function enter 940623.1.b if (pWb35Tx->Tx4Urb) usb_free_urb( pWb35Tx->Tx4Urb ); diff --git a/drivers/staging/winbond/linux/wbusb_s.h b/drivers/staging/winbond/linux/wbusb_s.h index d5c1d53de70b..b7fc7220ebd2 100644 --- a/drivers/staging/winbond/linux/wbusb_s.h +++ b/drivers/staging/winbond/linux/wbusb_s.h @@ -11,10 +11,6 @@ // //+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ -#define OS_SLEEP( _MT ) { set_current_state(TASK_INTERRUPTIBLE); \ - schedule_timeout( _MT*HZ/1000000 ); } - - //--------------------------------------------------------------------------- // RW_CONTEXT -- // diff --git a/drivers/staging/winbond/phy_calibration.c b/drivers/staging/winbond/phy_calibration.c index 272a65066aba..76183b23d721 100644 --- a/drivers/staging/winbond/phy_calibration.c +++ b/drivers/staging/winbond/phy_calibration.c @@ -1075,7 +1075,7 @@ void _tx_iq_calibration_winbond(hw_data_t *phw_data) //; [BB-chip]: Calibration (6h). Caculate TX-path IQ imbalance and setting TX path IQ compensation table //phy_set_rf_data(phw_data, 3, (3<<24)|0x025586); - OS_SLEEP(30000); // 20060612.1.a 30ms delay. Add the follow 2 lines + msleep(30); // 20060612.1.a 30ms delay. Add the follow 2 lines //To adjust TXVGA to fit iq_mag_0 range from 1250 ~ 1750 adjust_TXVGA_for_iq_mag( phw_data ); @@ -1698,7 +1698,7 @@ unsigned char adjust_TXVGA_for_iq_mag(hw_data_t *phw_data) phw_data->txvga_setting_for_cal = current_txvga; //pa_stall_execution(30000);//Sleep(30); - OS_SLEEP(30000); // 20060612.1.a + msleep(30); // 20060612.1.a if( !hw_get_dxx_reg(phw_data, REG_MODE_CTRL, ®_mode_ctrl) ) // 20060718.1 modify return FALSE; @@ -1715,10 +1715,10 @@ unsigned char adjust_TXVGA_for_iq_mag(hw_data_t *phw_data) PHY_DEBUG(("[CAL] MODE_CTRL (write) = 0x%08X\n", reg_mode_ctrl)); //pa_stall_execution(US); - OS_SLEEP(1); // 20060612.1.a + udelay(1); // 20060612.1.a //pa_stall_execution(300);//Sleep(30); - OS_SLEEP(300); // 20060612.1.a + udelay(300); // 20060612.1.a // b. hw_get_dxx_reg(phw_data, REG_CALIB_READ1, &val); @@ -1726,7 +1726,7 @@ unsigned char adjust_TXVGA_for_iq_mag(hw_data_t *phw_data) PHY_DEBUG(("[CAL] CALIB_READ1 = 0x%08X\n", val)); //pa_stall_execution(US); //pa_stall_execution(300);//Sleep(30); - OS_SLEEP(300); // 20060612.1.a + udelay(300); // 20060612.1.a iqcal_tone_i0 = _s13_to_s32(val & 0x00001FFF); iqcal_tone_q0 = _s13_to_s32((val & 0x03FFE000) >> 13); diff --git a/drivers/staging/winbond/reg.c b/drivers/staging/winbond/reg.c index 57af5b831509..0d505ac188e6 100644 --- a/drivers/staging/winbond/reg.c +++ b/drivers/staging/winbond/reg.c @@ -976,9 +976,9 @@ void Uxx_power_on_procedure( phw_data_t pHwData ) // 20060511.1 Fix the following 4 steps for Rx of RF 2230 initial fail Wb35Reg_WriteSync( pHwData, 0x03d4, 0x80 );// regulator on only - OS_SLEEP(10000); // Modify 20051221.1.b + msleep(10); // Modify 20051221.1.b Wb35Reg_WriteSync( pHwData, 0x03d4, 0xb8 );// REG_ON RF_RSTN on, and - OS_SLEEP(10000); // Modify 20051221.1.b + msleep(10); // Modify 20051221.1.b ltmp = 0x4968; if( (pHwData->phy_type == RF_WB_242) || @@ -988,12 +988,12 @@ void Uxx_power_on_procedure( phw_data_t pHwData ) Wb35Reg_WriteSync( pHwData, 0x03d4, 0xa0 );// PLL_PD REF_PD set to 0 - OS_SLEEP(20000); // Modify 20051221.1.b + msleep(20); // Modify 20051221.1.b Wb35Reg_ReadSync( pHwData, 0x03d0, <mp ); loop = 500; // Wait for 5 second 20061101 while( !(ltmp & 0x20) && loop-- ) { - OS_SLEEP(10000); // Modify 20051221.1.b + msleep(10); // Modify 20051221.1.b if( !Wb35Reg_ReadSync( pHwData, 0x03d0, <mp ) ) break; } @@ -1002,7 +1002,7 @@ void Uxx_power_on_procedure( phw_data_t pHwData ) } Wb35Reg_WriteSync( pHwData, 0x03b0, 1 );// Reset hardware first - OS_SLEEP(10000); // Add this 20051221.1.b + msleep(10); // Add this 20051221.1.b // Set burst write delay Wb35Reg_WriteSync( pHwData, 0x03f8, 0x7ff ); @@ -1167,23 +1167,23 @@ RFSynthesizer_initial(phw_data_t pHwData) // 20060511.1 --- Modifying the follow step for Rx issue----------------- ltmp = (1 << 31) | (0 << 30) | (20 << 24) | BitReverse( (0x07<<20)|0xE168E, 20); Wb35Reg_WriteSync( pHwData, 0x0864, ltmp ); - OS_SLEEP(10000); + msleep(10); ltmp = (1 << 31) | (0 << 30) | (20 << 24) | BitReverse( al2230_rf_data[7], 20); Wb35Reg_WriteSync( pHwData, 0x0864, ltmp ); - OS_SLEEP(10000); + msleep(10); case RF_AIROHA_2230S: // 20060420 Add this // 20060511.1 --- Modifying the follow step for Rx issue----------------- Wb35Reg_WriteSync( pHwData, 0x03d4, 0x80 );// regulator on only - OS_SLEEP(10000); // Modify 20051221.1.b + msleep(10); // Modify 20051221.1.b Wb35Reg_WriteSync( pHwData, 0x03d4, 0xa0 );// PLL_PD REF_PD set to 0 - OS_SLEEP(10000); // Modify 20051221.1.b + msleep(10); // Modify 20051221.1.b Wb35Reg_WriteSync( pHwData, 0x03d4, 0xe0 );// MLK_EN Wb35Reg_WriteSync( pHwData, 0x03b0, 1 );// Reset hardware first - OS_SLEEP(10000); // Add this 20051221.1.b + msleep(10); // Add this 20051221.1.b //------------------------------------------------------------------------ // The follow code doesn't use the burst-write mode @@ -1195,17 +1195,17 @@ RFSynthesizer_initial(phw_data_t pHwData) Wb35Reg_WriteSync( pHwData, 0x105c, ltmp ); pHwData->Wb35Reg.BB50 |= 0x13;//(MASK_IQCAL_MODE|MASK_CALIB_START);//20060315.1 modify Wb35Reg_WriteSync( pHwData, 0x1050, pHwData->Wb35Reg.BB50); - OS_SLEEP(5000); + msleep(5); //phy_set_rf_data(phw_data, 0x0F, (0x0F<<20) | 0xF01B0); //Activate Filter Cal. ltmp = (1 << 31) | (0 << 30) | (20 << 24) | BitReverse( (0x0F<<20) | 0xF01B0, 20); Wb35Reg_WriteSync( pHwData, 0x0864, ltmp ); - OS_SLEEP(5000); + msleep(5); //phy_set_rf_data(phw_data, 0x0F, (0x0F<<20) | 0xF01e0); //Activate TX DCC ltmp = (1 << 31) | (0 << 30) | (20 << 24) | BitReverse( (0x0F<<20) | 0xF01E0, 20); Wb35Reg_WriteSync( pHwData, 0x0864, ltmp ); - OS_SLEEP(5000); + msleep(5); //phy_set_rf_data(phw_data, 0x0F, (0x0F<<20) | 0xF01A0); //Resotre Initial Setting ltmp = (1 << 31) | (0 << 30) | (20 << 24) | BitReverse( (0x0F<<20) | 0xF01A0, 20); @@ -1229,16 +1229,16 @@ RFSynthesizer_initial(phw_data_t pHwData) //2.4GHz //ltmp = (1 << 31) | (0 << 30) | (24 << 24) | 0x1ABA8F; //Wb35Reg_WriteSync pHwData, 0x0864, ltmp ); - //OS_SLEEP(1000); // Sleep 1 ms + //msleep(1); // Sleep 1 ms ltmp = (1 << 31) | (0 << 30) | (24 << 24) | 0x9ABA8F; Wb35Reg_WriteSync( pHwData, 0x0864, ltmp ); - OS_SLEEP(5000); + msleep(5); ltmp = (1 << 31) | (0 << 30) | (24 << 24) | 0x3ABA8F; Wb35Reg_WriteSync( pHwData, 0x0864, ltmp ); - OS_SLEEP(5000); + msleep(5); ltmp = (1 << 31) | (0 << 30) | (24 << 24) | 0x1ABA8F; Wb35Reg_WriteSync( pHwData, 0x0864, ltmp ); - OS_SLEEP(5000); + msleep(5); //5GHz Wb35Reg_WriteSync( pHwData, 0x03dc, 0x00000000 ); @@ -1251,7 +1251,7 @@ RFSynthesizer_initial(phw_data_t pHwData) // Write to register. number must less and equal than 16 for( i=0; iWb35Reg.BB5C ); // pHwData->Wb35Reg.BB50 &= ~0x13;//(MASK_IQCAL_MODE|MASK_CALIB_START); // 20060315.1 fix // Wb35Reg_WriteSync( pHwData, 0x1050, pHwData->Wb35Reg.BB50); -// OS_SLEEP(1000); // Sleep 1 ms +// msleep(1); // Sleep 1 ms break; } } diff --git a/drivers/staging/winbond/wbhal.c b/drivers/staging/winbond/wbhal.c index 5d68ecec34c7..1a2533b5524d 100644 --- a/drivers/staging/winbond/wbhal.c +++ b/drivers/staging/winbond/wbhal.c @@ -80,7 +80,7 @@ void hal_halt(phw_data_t pHwData, void *ppa_data) { case 4: case 3: OS_TIMER_CANCEL( &pHwData->LEDTimer, &cancel ); - OS_SLEEP(100000); // Wait for Timer DPC exit 940623.2 + msleep(100); // Wait for Timer DPC exit 940623.2 Wb35Rx_destroy( pHwData ); // Release the Rx case 2: Wb35Tx_destroy( pHwData ); // Release the Tx case 1: Wb35Reg_destroy( pHwData ); // Release the Wb35 Regisster resources diff --git a/drivers/staging/winbond/wblinux.c b/drivers/staging/winbond/wblinux.c index 4ed45e488318..acf5640484c8 100644 --- a/drivers/staging/winbond/wblinux.c +++ b/drivers/staging/winbond/wblinux.c @@ -128,7 +128,7 @@ WbWlanHalt( PADAPTER Adapter ) #ifdef _PE_USB_INI_DUMP_ WBDEBUG(("[w35und] Hal_stop O.K.\n")); #endif - OS_SLEEP(100000);// Waiting Irp completed + msleep(100);// Waiting Irp completed // Destroy the NDIS module WBLINUX_Destroy( Adapter ); @@ -238,7 +238,7 @@ WbWLanInitialize(PADAPTER Adapter) // Waiting for HAL setting OK while (!hal_idle(pHwData)) - OS_SLEEP(10000); + msleep(10); MTO_Init(Adapter); -- 2.20.1