From 3421eecdee750bafc78b12ac25b3e980195265eb Mon Sep 17 00:00:00 2001 From: Bruce Allan Date: Tue, 8 Dec 2009 07:28:20 +0000 Subject: [PATCH] e1000e: only perform ESB2 MDIC workaround on certain configurations A workaround added for all ESB2 devices (adds a delay for all MDIC accesses which resolves an issue with the MDIC ready bit being set prematurely) is applicable only to devices in which the MAC-PHY interconnect is not operating in a certain mode with in-band MDIO. Check the control register for the operating mode and enable the workaround accordingly. Signed-off-by: Bruce Allan Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/e1000e/es2lan.c | 97 ++++++++++++++++++++++++------------- drivers/net/e1000e/hw.h | 5 ++ 2 files changed, 69 insertions(+), 33 deletions(-) diff --git a/drivers/net/e1000e/es2lan.c b/drivers/net/e1000e/es2lan.c index d2a104794609..3028f23da891 100644 --- a/drivers/net/e1000e/es2lan.c +++ b/drivers/net/e1000e/es2lan.c @@ -46,6 +46,9 @@ #define E1000_KMRNCTRLSTA_HD_CTRL_1000_DEFAULT 0x0000 #define E1000_KMRNCTRLSTA_OPMODE_E_IDLE 0x2000 +#define E1000_KMRNCTRLSTA_OPMODE_MASK 0x000C +#define E1000_KMRNCTRLSTA_OPMODE_INBAND_MDIO 0x0004 + #define E1000_TCTL_EXT_GCEX_MASK 0x000FFC00 /* Gigabit Carry Extend Padding */ #define DEFAULT_TCTL_EXT_GCEX_80003ES2LAN 0x00010000 @@ -462,28 +465,36 @@ static s32 e1000_read_phy_reg_gg82563_80003es2lan(struct e1000_hw *hw, return ret_val; } - /* - * The "ready" bit in the MDIC register may be incorrectly set - * before the device has completed the "Page Select" MDI - * transaction. So we wait 200us after each MDI command... - */ - udelay(200); + if (hw->dev_spec.e80003es2lan.mdic_wa_enable == true) { + /* + * The "ready" bit in the MDIC register may be incorrectly set + * before the device has completed the "Page Select" MDI + * transaction. So we wait 200us after each MDI command... + */ + udelay(200); - /* ...and verify the command was successful. */ - ret_val = e1000e_read_phy_reg_mdic(hw, page_select, &temp); + /* ...and verify the command was successful. */ + ret_val = e1000e_read_phy_reg_mdic(hw, page_select, &temp); - if (((u16)offset >> GG82563_PAGE_SHIFT) != temp) { - ret_val = -E1000_ERR_PHY; - e1000_release_phy_80003es2lan(hw); - return ret_val; - } + if (((u16)offset >> GG82563_PAGE_SHIFT) != temp) { + ret_val = -E1000_ERR_PHY; + e1000_release_phy_80003es2lan(hw); + return ret_val; + } - udelay(200); + udelay(200); - ret_val = e1000e_read_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset, - data); + ret_val = e1000e_read_phy_reg_mdic(hw, + MAX_PHY_REG_ADDRESS & offset, + data); + + udelay(200); + } else { + ret_val = e1000e_read_phy_reg_mdic(hw, + MAX_PHY_REG_ADDRESS & offset, + data); + } - udelay(200); e1000_release_phy_80003es2lan(hw); return ret_val; @@ -526,28 +537,35 @@ static s32 e1000_write_phy_reg_gg82563_80003es2lan(struct e1000_hw *hw, return ret_val; } + if (hw->dev_spec.e80003es2lan.mdic_wa_enable == true) { + /* + * The "ready" bit in the MDIC register may be incorrectly set + * before the device has completed the "Page Select" MDI + * transaction. So we wait 200us after each MDI command... + */ + udelay(200); - /* - * The "ready" bit in the MDIC register may be incorrectly set - * before the device has completed the "Page Select" MDI - * transaction. So we wait 200us after each MDI command... - */ - udelay(200); + /* ...and verify the command was successful. */ + ret_val = e1000e_read_phy_reg_mdic(hw, page_select, &temp); - /* ...and verify the command was successful. */ - ret_val = e1000e_read_phy_reg_mdic(hw, page_select, &temp); + if (((u16)offset >> GG82563_PAGE_SHIFT) != temp) { + e1000_release_phy_80003es2lan(hw); + return -E1000_ERR_PHY; + } - if (((u16)offset >> GG82563_PAGE_SHIFT) != temp) { - e1000_release_phy_80003es2lan(hw); - return -E1000_ERR_PHY; - } + udelay(200); - udelay(200); + ret_val = e1000e_write_phy_reg_mdic(hw, + MAX_PHY_REG_ADDRESS & offset, + data); - ret_val = e1000e_write_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset, - data); + udelay(200); + } else { + ret_val = e1000e_write_phy_reg_mdic(hw, + MAX_PHY_REG_ADDRESS & offset, + data); + } - udelay(200); e1000_release_phy_80003es2lan(hw); return ret_val; @@ -866,6 +884,19 @@ static s32 e1000_init_hw_80003es2lan(struct e1000_hw *hw) reg_data &= ~0x00100000; E1000_WRITE_REG_ARRAY(hw, E1000_FFLT, 0x0001, reg_data); + /* default to true to enable the MDIC W/A */ + hw->dev_spec.e80003es2lan.mdic_wa_enable = true; + + ret_val = e1000_read_kmrn_reg_80003es2lan(hw, + E1000_KMRNCTRLSTA_OFFSET >> + E1000_KMRNCTRLSTA_OFFSET_SHIFT, + &i); + if (!ret_val) { + if ((i & E1000_KMRNCTRLSTA_OPMODE_MASK) == + E1000_KMRNCTRLSTA_OPMODE_INBAND_MDIO) + hw->dev_spec.e80003es2lan.mdic_wa_enable = false; + } + /* * Clear all of the statistics registers (clear on read). It is * important that we do this after we have tried to establish link diff --git a/drivers/net/e1000e/hw.h b/drivers/net/e1000e/hw.h index 5ed17889e64d..2784cf44a6f3 100644 --- a/drivers/net/e1000e/hw.h +++ b/drivers/net/e1000e/hw.h @@ -900,6 +900,10 @@ struct e1000_dev_spec_82571 { u32 smb_counter; }; +struct e1000_dev_spec_80003es2lan { + bool mdic_wa_enable; +}; + struct e1000_shadow_ram { u16 value; bool modified; @@ -928,6 +932,7 @@ struct e1000_hw { union { struct e1000_dev_spec_82571 e82571; + struct e1000_dev_spec_80003es2lan e80003es2lan; struct e1000_dev_spec_ich8lan ich8lan; } dev_spec; }; -- 2.20.1