From 33f6c688c94a8ff5cf384912c2aa044cf17ef550 Mon Sep 17 00:00:00 2001 From: Tracey Dent Date: Mon, 20 Sep 2010 21:19:39 -0400 Subject: [PATCH] Staging: rtl8187se: r8180_hw: fixed a lot of checkpatch.pl issues Fixed numerous coding style issues using checkpatch.pl Signed-off-by: Tracey Dent Signed-off-by: Greg Kroah-Hartman --- drivers/staging/rtl8187se/r8180_hw.h | 432 ++++++++++++++------------- 1 file changed, 221 insertions(+), 211 deletions(-) diff --git a/drivers/staging/rtl8187se/r8180_hw.h b/drivers/staging/rtl8187se/r8180_hw.h index db296911ec77..3fca144a56a4 100644 --- a/drivers/staging/rtl8187se/r8180_hw.h +++ b/drivers/staging/rtl8187se/r8180_hw.h @@ -87,7 +87,7 @@ #define INTA_RXOK (1) #define INTA_MASK 0x3c -#define RXRING_ADDR 0xe4 // page 0 +#define RXRING_ADDR 0xe4 /* page 0 */ #define PGSELECT 0x5e #define PGSELECT_PG_SHIFT 0 #define RX_CONF 0x44 @@ -149,13 +149,13 @@ #define EPROM_CS_SHIFT 3 #define EPROM_CK_SHIFT 2 #define PHY_ADR 0x7c -#define SECURITY 0x5f //1209 this is sth wrong +#define SECURITY 0x5f /* 1209 this is sth wrong */ #define SECURITY_WEP_TX_ENABLE_SHIFT 1 #define SECURITY_WEP_RX_ENABLE_SHIFT 0 #define SECURITY_ENCRYP_104 1 #define SECURITY_ENCRYP_SHIFT 4 #define SECURITY_ENCRYP_MASK ((1<<4)|(1<<5)) -#define KEY0 0x90 //1209 this is sth wrong +#define KEY0 0x90 /* 1209 this is sth wrong */ #define CONFIG2_ANTENNA_SHIFT 6 #define TX_BEACON_RING_ADDR 0x4c #define CONFIG0_WEP40_SHIFT 7 @@ -177,11 +177,11 @@ #define CR 0x0037 -#define RF_SW_CONFIG 0x8 // store data which is transmitted to RF for driver +#define RF_SW_CONFIG 0x8 /* store data which is transmitted to RF for driver */ #define RF_SW_CFG_SI BIT1 -#define EIFS 0x2D // Extended InterFrame Space Timer, in unit of 4 us. +#define EIFS 0x2D /* Extended InterFrame Space Timer, in unit of 4 us. */ -#define BRSR 0x34 // Basic rate set +#define BRSR 0x34 /* Basic rate set */ #define IMR 0x006C #define ISR 0x003C @@ -201,8 +201,8 @@ #define CONFIG3 0x0059 #define CONFIG4 0x005A - // SD3 szuyitasi: Mac0x57= CC -> B0 Mac0x60= D1 -> C6 - // Mac0x60 = 0x000004C6 power save parameters + /* SD3 szuyitasi: Mac0x57= CC -> B0 Mac0x60= D1 -> C6 */ + /* Mac0x60 = 0x000004C6 power save parameters */ #define ANAPARM_ASIC_ON 0xB0054D00 #define ANAPARM2_ASIC_ON 0x000004C6 @@ -256,9 +256,9 @@ #define CONFIG5 0x00D8 -#define PHYPR 0xDA //0xDA - 0x0B PHY Parameter Register. +#define PHYPR 0xDA /* 0xDA - 0x0B PHY Parameter Register. */ -#define FEMR 0x1D4 // Function Event Mask register +#define FEMR 0x1D4 /* Function Event Mask register */ #define FFER 0x00FC #define FFER_END 0x00FF @@ -274,72 +274,72 @@ * this leads to some awkward names... */ -#define BRSR_BPLCP ((1<< 8)) -#define BRSR_MBR ((1<< 1)|(1<< 0)) -#define BRSR_MBR_8185 ((1<< 11)|(1<< 10)|(1<< 9)|(1<< 8)|(1<< 7)|(1<< 6)|(1<< 5)|(1<< 4)|(1<< 3)|(1<< 2)|(1<< 1)|(1<< 0)) -#define BRSR_MBR0 ((1<< 0)) -#define BRSR_MBR1 ((1<< 1)) - -#define CR_RST ((1<< 4)) -#define CR_RE ((1<< 3)) -#define CR_TE ((1<< 2)) -#define CR_MulRW ((1<< 0)) - -#define IMR_Dot11hInt ((1<< 25)) // 802.11h Measurement Interrupt -#define IMR_BcnDmaInt ((1<< 24)) // Beacon DMA Interrupt // What differenct between BcnDmaInt and BcnInt??? -#define IMR_WakeInt ((1<< 23)) // Wake Up Interrupt -#define IMR_TXFOVW ((1<< 22)) // Tx FIFO Overflow Interrupt -#define IMR_TimeOut1 ((1<< 21)) // Time Out Interrupt 1 -#define IMR_BcnInt ((1<< 20)) // Beacon Time out Interrupt -#define IMR_ATIMInt ((1<< 19)) // ATIM Time Out Interrupt -#define IMR_TBDER ((1<< 18)) // Tx Beacon Descriptor Error Interrupt -#define IMR_TBDOK ((1<< 17)) // Tx Beacon Descriptor OK Interrupt -#define IMR_THPDER ((1<< 16)) // Tx High Priority Descriptor Error Interrupt -#define IMR_THPDOK ((1<< 15)) // Tx High Priority Descriptor OK Interrupt -#define IMR_TVODER ((1<< 14)) // Tx AC_VO Descriptor Error Interrupt -#define IMR_TVODOK ((1<< 13)) // Tx AC_VO Descriptor OK Interrupt -#define IMR_FOVW ((1<< 12)) // Rx FIFO Overflow Interrupt -#define IMR_RDU ((1<< 11)) // Rx Descriptor Unavailable Interrupt -#define IMR_TVIDER ((1<< 10)) // Tx AC_VI Descriptor Error Interrupt -#define IMR_TVIDOK ((1<< 9)) // Tx AC_VI Descriptor OK Interrupt -#define IMR_RER ((1<< 8)) // Rx Error Interrupt -#define IMR_ROK ((1<< 7)) // Receive OK Interrupt -#define IMR_TBEDER ((1<< 6)) // Tx AC_BE Descriptor Error Interrupt -#define IMR_TBEDOK ((1<< 5)) // Tx AC_BE Descriptor OK Interrupt -#define IMR_TBKDER ((1<< 4)) // Tx AC_BK Descriptor Error Interrupt -#define IMR_TBKDOK ((1<< 3)) // Tx AC_BK Descriptor OK Interrupt -#define IMR_RQoSOK ((1<< 2)) // Rx QoS OK Interrupt -#define IMR_TimeOut2 ((1<< 1)) // Time Out Interrupt 2 -#define IMR_TimeOut3 ((1<< 0)) // Time Out Interrupt 3 -#define IMR_TMGDOK ((1<<30)) -#define ISR_Dot11hInt ((1<< 25)) // 802.11h Measurement Interrupt -#define ISR_BcnDmaInt ((1<< 24)) // Beacon DMA Interrupt // What differenct between BcnDmaInt and BcnInt??? -#define ISR_WakeInt ((1<< 23)) // Wake Up Interrupt -#define ISR_TXFOVW ((1<< 22)) // Tx FIFO Overflow Interrupt -#define ISR_TimeOut1 ((1<< 21)) // Time Out Interrupt 1 -#define ISR_BcnInt ((1<< 20)) // Beacon Time out Interrupt -#define ISR_ATIMInt ((1<< 19)) // ATIM Time Out Interrupt -#define ISR_TBDER ((1<< 18)) // Tx Beacon Descriptor Error Interrupt -#define ISR_TBDOK ((1<< 17)) // Tx Beacon Descriptor OK Interrupt -#define ISR_THPDER ((1<< 16)) // Tx High Priority Descriptor Error Interrupt -#define ISR_THPDOK ((1<< 15)) // Tx High Priority Descriptor OK Interrupt -#define ISR_TVODER ((1<< 14)) // Tx AC_VO Descriptor Error Interrupt -#define ISR_TVODOK ((1<< 13)) // Tx AC_VO Descriptor OK Interrupt -#define ISR_FOVW ((1<< 12)) // Rx FIFO Overflow Interrupt -#define ISR_RDU ((1<< 11)) // Rx Descriptor Unavailable Interrupt -#define ISR_TVIDER ((1<< 10)) // Tx AC_VI Descriptor Error Interrupt -#define ISR_TVIDOK ((1<< 9)) // Tx AC_VI Descriptor OK Interrupt -#define ISR_RER ((1<< 8)) // Rx Error Interrupt -#define ISR_ROK ((1<< 7)) // Receive OK Interrupt -#define ISR_TBEDER ((1<< 6)) // Tx AC_BE Descriptor Error Interrupt -#define ISR_TBEDOK ((1<< 5)) // Tx AC_BE Descriptor OK Interrupt -#define ISR_TBKDER ((1<< 4)) // Tx AC_BK Descriptor Error Interrupt -#define ISR_TBKDOK ((1<< 3)) // Tx AC_BK Descriptor OK Interrupt -#define ISR_RQoSOK ((1<< 2)) // Rx QoS OK Interrupt -#define ISR_TimeOut2 ((1<< 1)) // Time Out Interrupt 2 -#define ISR_TimeOut3 ((1<< 0)) // Time Out Interrupt 3 - -//these definition is used for Tx/Rx test temporarily +#define BRSR_BPLCP ((1 << 8)) +#define BRSR_MBR ((1 << 1)|(1 << 0)) +#define BRSR_MBR_8185 ((1 << 11)|(1 << 10)|(1 << 9)|(1 << 8)|(1 << 7)|(1 << 6)|(1 << 5)|(1 << 4)|(1 << 3)|(1 << 2)|(1 << 1)|(1 << 0)) +#define BRSR_MBR0 ((1 << 0)) +#define BRSR_MBR1 ((1 << 1)) + +#define CR_RST ((1 << 4)) +#define CR_RE ((1 << 3)) +#define CR_TE ((1 << 2)) +#define CR_MulRW ((1 << 0)) + +#define IMR_Dot11hInt ((1 << 25)) /*802.11h Measurement Interrupt */ +#define IMR_BcnDmaInt ((1 << 24)) /*Beacon DMA Interrupt */ /*What differenct between BcnDmaInt and BcnInt??? */ +#define IMR_WakeInt ((1 << 23)) /*Wake Up Interrupt */ +#define IMR_TXFOVW ((1 << 22)) /*Tx FIFO Overflow Interrupt */ +#define IMR_TimeOut1 ((1 << 21)) /*Time Out Interrupt 1 */ +#define IMR_BcnInt ((1 << 20)) /*Beacon Time out Interrupt */ +#define IMR_ATIMInt ((1 << 19)) /*ATIM Time Out Interrupt */ +#define IMR_TBDER ((1 << 18)) /*Tx Beacon Descriptor Error Interrupt */ +#define IMR_TBDOK ((1 << 17)) /*Tx Beacon Descriptor OK Interrupt */ +#define IMR_THPDER ((1 << 16)) /*Tx High Priority Descriptor Error Interrupt */ +#define IMR_THPDOK ((1 << 15)) /*Tx High Priority Descriptor OK Interrupt */ +#define IMR_TVODER ((1 << 14)) /*Tx AC_VO Descriptor Error Interrupt */ +#define IMR_TVODOK ((1 << 13)) /*Tx AC_VO Descriptor OK Interrupt */ +#define IMR_FOVW ((1 << 12)) /*Rx FIFO Overflow Interrupt */ +#define IMR_RDU ((1 << 11)) /*Rx Descriptor Unavailable Interrupt */ +#define IMR_TVIDER ((1 << 10)) /*Tx AC_VI Descriptor Error Interrupt */ +#define IMR_TVIDOK ((1 << 9)) /*Tx AC_VI Descriptor OK Interrupt */ +#define IMR_RER ((1 << 8)) /*Rx Error Interrupt */ +#define IMR_ROK ((1 << 7)) /*Receive OK Interrupt */ +#define IMR_TBEDER ((1 << 6)) /*Tx AC_BE Descriptor Error Interrupt */ +#define IMR_TBEDOK ((1 << 5)) /*Tx AC_BE Descriptor OK Interrupt */ +#define IMR_TBKDER ((1 << 4)) /*Tx AC_BK Descriptor Error Interrupt */ +#define IMR_TBKDOK ((1 << 3)) /*Tx AC_BK Descriptor OK Interrupt */ +#define IMR_RQoSOK ((1 << 2)) /*Rx QoS OK Interrupt */ +#define IMR_TimeOut2 ((1 << 1)) /*Time Out Interrupt 2 */ +#define IMR_TimeOut3 ((1 << 0)) /*Time Out Interrupt 3 */ +#define IMR_TMGDOK ((1 << 30)) +#define ISR_Dot11hInt ((1 << 25)) /*802.11h Measurement Interrupt */ +#define ISR_BcnDmaInt ((1 << 24)) /*Beacon DMA Interrupt */ /*What differenct between BcnDmaInt and BcnInt??? */ +#define ISR_WakeInt ((1 << 23)) /*Wake Up Interrupt */ +#define ISR_TXFOVW ((1 << 22)) /*Tx FIFO Overflow Interrupt */ +#define ISR_TimeOut1 ((1 << 21)) /*Time Out Interrupt 1 */ +#define ISR_BcnInt ((1 << 20)) /*Beacon Time out Interrupt */ +#define ISR_ATIMInt ((1 << 19)) /*ATIM Time Out Interrupt */ +#define ISR_TBDER ((1 << 18)) /*Tx Beacon Descriptor Error Interrupt */ +#define ISR_TBDOK ((1 << 17)) /*Tx Beacon Descriptor OK Interrupt */ +#define ISR_THPDER ((1 << 16)) /*Tx High Priority Descriptor Error Interrupt */ +#define ISR_THPDOK ((1 << 15)) /*Tx High Priority Descriptor OK Interrupt */ +#define ISR_TVODER ((1 << 14)) /*Tx AC_VO Descriptor Error Interrupt */ +#define ISR_TVODOK ((1 << 13)) /*Tx AC_VO Descriptor OK Interrupt */ +#define ISR_FOVW ((1 << 12)) /*Rx FIFO Overflow Interrupt */ +#define ISR_RDU ((1 << 11)) /*Rx Descriptor Unavailable Interrupt */ +#define ISR_TVIDER ((1 << 10)) /*Tx AC_VI Descriptor Error Interrupt */ +#define ISR_TVIDOK ((1 << 9)) /*Tx AC_VI Descriptor OK Interrupt */ +#define ISR_RER ((1 << 8)) /*Rx Error Interrupt */ +#define ISR_ROK ((1 << 7)) /*Receive OK Interrupt */ +#define ISR_TBEDER ((1 << 6)) /*Tx AC_BE Descriptor Error Interrupt */ +#define ISR_TBEDOK ((1 << 5)) /*Tx AC_BE Descriptor OK Interrupt */ +#define ISR_TBKDER ((1 << 4)) /*Tx AC_BK Descriptor Error Interrupt */ +#define ISR_TBKDOK ((1 << 3)) /*Tx AC_BK Descriptor OK Interrupt */ +#define ISR_RQoSOK ((1 << 2)) /*Rx QoS OK Interrupt */ +#define ISR_TimeOut2 ((1 << 1)) /*Time Out Interrupt 2 */ +#define ISR_TimeOut3 ((1 << 0)) /*Time Out Interrupt 3 */ + +/* these definition is used for Tx/Rx test temporarily */ #define ISR_TLPDER ISR_TVIDER #define ISR_TLPDOK ISR_TVIDOK #define ISR_TNPDER ISR_TVODER @@ -354,66 +354,66 @@ #define HW_VERID_R8185_D 5 #define HW_VERID_R8185B_B 6 -#define TCR_CWMIN ((1<<31)) -#define TCR_SWSEQ ((1<<30)) -#define TCR_HWVERID_MASK ((1<<27)|(1<<26)|(1<<25)) +#define TCR_CWMIN ((1 << 31)) +#define TCR_SWSEQ ((1 << 30)) +#define TCR_HWVERID_MASK ((1 << 27)|(1 << 26)|(1 << 25)) #define TCR_HWVERID_SHIFT 25 -#define TCR_SAT ((1<<24)) -#define TCR_PLCP_LEN TCR_SAT // rtl8180 -#define TCR_MXDMA_MASK ((1<<23)|(1<<22)|(1<<21)) +#define TCR_SAT ((1 << 24)) +#define TCR_PLCP_LEN TCR_SAT /* rtl8180 */ +#define TCR_MXDMA_MASK ((1 << 23)|(1 << 22)|(1 << 21)) #define TCR_MXDMA_1024 6 #define TCR_MXDMA_2048 7 #define TCR_MXDMA_SHIFT 21 -#define TCR_DISCW ((1<<20)) -#define TCR_ICV ((1<<19)) -#define TCR_LBK ((1<<18)|(1<<17)) -#define TCR_LBK1 ((1<<18)) -#define TCR_LBK0 ((1<<17)) -#define TCR_CRC ((1<<16)) -#define TCR_DPRETRY_MASK ((1<<15)|(1<<14)|(1<<13)|(1<<12)|(1<<11)|(1<<10)|(1<<9)|(1<<8)) -#define TCR_RTSRETRY_MASK ((1<<0)|(1<<1)|(1<<2)|(1<<3)|(1<<4)|(1<<5)|(1<<6)|(1<<7)) -#define TCR_PROBE_NOTIMESTAMP_SHIFT 29 //rtl8185 - -#define RCR_ONLYERLPKT ((1<<31)) +#define TCR_DISCW ((1 << 20)) +#define TCR_ICV ((1 << 19)) +#define TCR_LBK ((1 << 18)|(1 << 17)) +#define TCR_LBK1 ((1 << 18)) +#define TCR_LBK0 ((1 << 17)) +#define TCR_CRC ((1 << 16)) +#define TCR_DPRETRY_MASK ((1 << 15)|(1 << 14)|(1 << 13)|(1 << 12)|(1 << 11)|(1 << 10)|(1 << 9)|(1 << 8)) +#define TCR_RTSRETRY_MASK ((1 << 0)|(1 << 1)|(1 << 2)|(1 << 3)|(1 << 4)|(1 << 5)|(1 << 6)|(1 << 7)) +#define TCR_PROBE_NOTIMESTAMP_SHIFT 29 /* rtl8185 */ + +#define RCR_ONLYERLPKT ((1 << 31)) #define RCR_CS_SHIFT 29 -#define RCR_CS_MASK ((1<<30) | (1<<29)) -#define RCR_ENMARP ((1<<28)) -#define RCR_CBSSID ((1<<23)) -#define RCR_APWRMGT ((1<<22)) -#define RCR_ADD3 ((1<<21)) -#define RCR_AMF ((1<<20)) -#define RCR_ACF ((1<<19)) -#define RCR_ADF ((1<<18)) -#define RCR_RXFTH ((1<<15)|(1<<14)|(1<<13)) -#define RCR_RXFTH2 ((1<<15)) -#define RCR_RXFTH1 ((1<<14)) -#define RCR_RXFTH0 ((1<<13)) -#define RCR_AICV ((1<<12)) -#define RCR_MXDMA ((1<<10)|(1<< 9)|(1<< 8)) -#define RCR_MXDMA2 ((1<<10)) -#define RCR_MXDMA1 ((1<< 9)) -#define RCR_MXDMA0 ((1<< 8)) -#define RCR_9356SEL ((1<< 6)) -#define RCR_ACRC32 ((1<< 5)) -#define RCR_AB ((1<< 3)) -#define RCR_AM ((1<< 2)) -#define RCR_APM ((1<< 1)) -#define RCR_AAP ((1<< 0)) - -#define CR9346_EEM ((1<<7)|(1<<6)) -#define CR9346_EEM1 ((1<<7)) -#define CR9346_EEM0 ((1<<6)) -#define CR9346_EECS ((1<<3)) -#define CR9346_EESK ((1<<2)) -#define CR9346_EED1 ((1<<1)) -#define CR9346_EED0 ((1<<0)) - -#define CONFIG3_PARM_En ((1<<6)) -#define CONFIG3_FuncRegEn ((1<<1)) - -#define CONFIG4_PWRMGT ((1<<5)) - -#define MSR_LINK_MASK ((1<<2)|(1<<3)) +#define RCR_CS_MASK ((1 << 30) | (1 << 29)) +#define RCR_ENMARP ((1 << 28)) +#define RCR_CBSSID ((1 << 23)) +#define RCR_APWRMGT ((1 << 22)) +#define RCR_ADD3 ((1 << 21)) +#define RCR_AMF ((1 << 20)) +#define RCR_ACF ((1 << 19)) +#define RCR_ADF ((1 << 18)) +#define RCR_RXFTH ((1 << 15)|(1 << 14)|(1 << 13)) +#define RCR_RXFTH2 ((1 << 15)) +#define RCR_RXFTH1 ((1 << 14)) +#define RCR_RXFTH0 ((1 << 13)) +#define RCR_AICV ((1 << 12)) +#define RCR_MXDMA ((1 << 10)|(1 << 9)|(1 << 8)) +#define RCR_MXDMA2 ((1 << 10)) +#define RCR_MXDMA1 ((1 << 9)) +#define RCR_MXDMA0 ((1 << 8)) +#define RCR_9356SEL ((1 << 6)) +#define RCR_ACRC32 ((1 << 5)) +#define RCR_AB ((1 << 3)) +#define RCR_AM ((1 << 2)) +#define RCR_APM ((1 << 1)) +#define RCR_AAP ((1 << 0)) + +#define CR9346_EEM ((1 << 7)|(1 << 6)) +#define CR9346_EEM1 ((1 << 7)) +#define CR9346_EEM0 ((1 << 6)) +#define CR9346_EECS ((1 << 3)) +#define CR9346_EESK ((1 << 2)) +#define CR9346_EED1 ((1 << 1)) +#define CR9346_EED0 ((1 << 0)) + +#define CONFIG3_PARM_En ((1 << 6)) +#define CONFIG3_FuncRegEn ((1 << 1)) + +#define CONFIG4_PWRMGT ((1 << 5)) + +#define MSR_LINK_MASK ((1 << 2)|(1 << 3)) #define MSR_LINK_MANAGED 2 #define MSR_LINK_NONE 0 #define MSR_LINK_SHIFT 2 @@ -426,20 +426,20 @@ #define BintrItv_BintrItv (0x01FF) -#define FEMR_INTR ((1<<15)) -#define FEMR_WKUP ((1<<14)) -#define FEMR_GWAKE ((1<< 4)) +#define FEMR_INTR ((1 << 15)) +#define FEMR_WKUP ((1 << 14)) +#define FEMR_GWAKE ((1 << 4)) -#define FFER_INTR ((1<<15)) -#define FFER_GWAKE ((1<< 4)) +#define FFER_INTR ((1 << 15)) +#define FFER_GWAKE ((1 << 4)) -// Three wire mode. +/* Three wire mode. */ #define SW_THREE_WIRE 0 #define HW_THREE_WIRE 2 -//RTL8187S by amy +/* RTL8187S by amy */ #define HW_THREE_WIRE_PI 5 #define HW_THREE_WIRE_SI 6 -//by amy +/* by amy */ #define TCR_LRL_OFFSET 0 #define TCR_SRL_OFFSET 8 #define TCR_MXDMA_OFFSET 21 @@ -449,86 +449,96 @@ #define RCR_MXDMA_OFFSET 8 #define RCR_FIFO_OFFSET 13 -#define AckTimeOutReg 0x79 // ACK timeout register, in unit of 4 us. +#define AckTimeOutReg 0x79 /* ACK timeout register, in unit of 4 us. */ #define RFTiming 0x8C -#define TPPollStop 0x93 +#define TPPollStop 0x93 -#define TXAGC_CTL 0x9C // TX_AGC_CONTROL (0x9C seems be removed at 8185B, see p37). +#define TXAGC_CTL 0x9C /*< RJ_TODO_8185B> TX_AGC_CONTROL (0x9C seems be removed at 8185B, see p37). */ #define CCK_TXAGC 0x9D #define OFDM_TXAGC 0x9E #define ANTSEL 0x9F -#define ACM_CONTROL 0x00BF // ACM Control Registe +#define ACM_CONTROL 0x00BF /* ACM Control Registe */ -#define IntMig 0xE2 // Interrupt Migration (0xE2 ~ 0xE3) +#define IntMig 0xE2 /* Interrupt Migration (0xE2 ~ 0xE3) */ -#define TID_AC_MAP 0xE8 // TID to AC Mapping Register +#define TID_AC_MAP 0xE8 /* TID to AC Mapping Register */ -#define ANAPARAM3 0xEE // How to use it? +#define ANAPARAM3 0xEE /* How to use it? */ -#define AC_VO_PARAM 0xF0 // AC_VO Parameters Record -#define AC_VI_PARAM 0xF4 // AC_VI Parameters Record -#define AC_BE_PARAM 0xF8 // AC_BE Parameters Record -#define AC_BK_PARAM 0xFC // AC_BK Parameters Record +#define AC_VO_PARAM 0xF0 /* AC_VO Parameters Record */ +#define AC_VI_PARAM 0xF4 /* AC_VI Parameters Record */ +#define AC_BE_PARAM 0xF8 /* AC_BE Parameters Record */ +#define AC_BK_PARAM 0xFC /* AC_BK Parameters Record */ -#define GPIOCtrl 0x16B // GPIO Control Register. -#define ARFR 0x1E0 // Auto Rate Fallback Register (0x1e0 ~ 0x1e2) +#define GPIOCtrl 0x16B /*GPIO Control Register. */ +#define ARFR 0x1E0 /* Auto Rate Fallback Register (0x1e0 ~ 0x1e2) */ -#define RFSW_CTRL 0x272 // 0x272-0x273. -#define SW_3W_DB0 0x274 // Software 3-wire data buffer bit 31~0. -#define SW_3W_DB1 0x278 // Software 3-wire data buffer bit 63~32. -#define SW_3W_CMD0 0x27C // Software 3-wire Control/Status Register. -#define SW_3W_CMD1 0x27D // Software 3-wire Control/Status Register. +#define RFSW_CTRL 0x272 /* 0x272-0x273. */ +#define SW_3W_DB0 0x274 /* Software 3-wire data buffer bit 31~0. */ +#define SW_3W_DB1 0x278 /* Software 3-wire data buffer bit 63~32. */ +#define SW_3W_CMD0 0x27C /* Software 3-wire Control/Status Register. */ +#define SW_3W_CMD1 0x27D /* Software 3-wire Control/Status Register. */ -#define PI_DATA_READ 0X360 // 0x360 - 0x361 Parallel Interface Data Register. -#define SI_DATA_READ 0x362 // 0x362 - 0x363 Serial Interface Data Register. +#define PI_DATA_READ 0X360 /* 0x360 - 0x361 Parallel Interface Data Register. */ +#define SI_DATA_READ 0x362 /* 0x362 - 0x363 Serial Interface Data Register. */ -//---------------------------------------------------------------------------- -// 8185B TPPollStop bits (offset 0x93, 1 byte) -//---------------------------------------------------------------------------- +/* +---------------------------------------------------------------------------- + 8185B TPPollStop bits (offset 0x93, 1 byte) +---------------------------------------------------------------------------- +*/ #define TPPOLLSTOP_BQ (0x01 << 7) #define TPPOLLSTOP_AC_VIQ (0x01 << 4) #define MSR_LINK_ENEDCA (1<<4) -//---------------------------------------------------------------------------- -// 8187B AC_XX_PARAM bits -//---------------------------------------------------------------------------- +/* +---------------------------------------------------------------------------- + 8187B AC_XX_PARAM bits +---------------------------------------------------------------------------- +*/ #define AC_PARAM_TXOP_LIMIT_OFFSET 16 #define AC_PARAM_ECW_MAX_OFFSET 12 #define AC_PARAM_ECW_MIN_OFFSET 8 #define AC_PARAM_AIFS_OFFSET 0 -//---------------------------------------------------------------------------- -// 8187B ACM_CONTROL bits (Offset 0xBF, 1 Byte) -//---------------------------------------------------------------------------- -#define VOQ_ACM_EN (0x01 << 7) //BIT7 -#define VIQ_ACM_EN (0x01 << 6) //BIT6 -#define BEQ_ACM_EN (0x01 << 5) //BIT5 -#define ACM_HW_EN (0x01 << 4) //BIT4 -#define VOQ_ACM_CTL (0x01 << 2) //BIT2 // Set to 1 when AC_VO used time reaches or exceeds the admitted time -#define VIQ_ACM_CTL (0x01 << 1) //BIT1 // Set to 1 when AC_VI used time reaches or exceeds the admitted time -#define BEQ_ACM_CTL (0x01 << 0) //BIT0 // Set to 1 when AC_BE used time reaches or exceeds the admitted time - - -//---------------------------------------------------------------------------- -// 8185B SW_3W_CMD bits (Offset 0x27C-0x27D, 16bit) -//---------------------------------------------------------------------------- -#define SW_3W_CMD0_HOLD ((1<< 7)) -#define SW_3W_CMD1_RE ((1<< 0)) // BIT8 -#define SW_3W_CMD1_WE ((1<< 1)) // BIT9 -#define SW_3W_CMD1_DONE ((1<< 2)) // BIT10 - -#define BB_HOST_BANG_RW (1<<3) - -//---------------------------------------------------------------------------- -// 8185B RATE_FALLBACK_CTL bits (Offset 0xBE, 8bit) -//---------------------------------------------------------------------------- -#define RATE_FALLBACK_CTL_ENABLE ((1<< 7)) -#define RATE_FALLBACK_CTL_ENABLE_RTSCTS ((1<< 6)) -// Auto rate fallback per 2^n retry. +/* +---------------------------------------------------------------------------- + 8187B ACM_CONTROL bits (Offset 0xBF, 1 Byte) +---------------------------------------------------------------------------- +*/ +#define VOQ_ACM_EN (0x01 << 7) /*BIT7 */ +#define VIQ_ACM_EN (0x01 << 6) /*BIT6 */ +#define BEQ_ACM_EN (0x01 << 5) /*BIT5 */ +#define ACM_HW_EN (0x01 << 4) /*BIT4 */ +#define VOQ_ACM_CTL (0x01 << 2) /*BIT2 */ /* Set to 1 when AC_VO used time reaches or exceeds the admitted time */ +#define VIQ_ACM_CTL (0x01 << 1) /*BIT1 */ /* Set to 1 when AC_VI used time reaches or exceeds the admitted time */ +#define BEQ_ACM_CTL (0x01 << 0) /*BIT0 */ /* Set to 1 when AC_BE used time reaches or exceeds the admitted time */ + + +/* +---------------------------------------------------------------------------- + 8185B SW_3W_CMD bits (Offset 0x27C-0x27D, 16bit) +---------------------------------------------------------------------------- +*/ +#define SW_3W_CMD0_HOLD ((1 << 7)) +#define SW_3W_CMD1_RE ((1 << 0)) /* BIT8 */ +#define SW_3W_CMD1_WE ((1 << 1)) /* BIT9 */ +#define SW_3W_CMD1_DONE ((1 << 2)) /* BIT10 */ + +#define BB_HOST_BANG_RW (1 << 3) + +/* +---------------------------------------------------------------------------- + 8185B RATE_FALLBACK_CTL bits (Offset 0xBE, 8bit) +---------------------------------------------------------------------------- +*/ +#define RATE_FALLBACK_CTL_ENABLE ((1 << 7)) +#define RATE_FALLBACK_CTL_ENABLE_RTSCTS ((1 << 6)) +/* Auto rate fallback per 2^n retry. */ #define RATE_FALLBACK_CTL_AUTO_STEP0 0x00 #define RATE_FALLBACK_CTL_AUTO_STEP1 0x01 #define RATE_FALLBACK_CTL_AUTO_STEP2 0x02 @@ -537,37 +547,37 @@ #define RTL8225z2_ANAPARAM_OFF 0x55480658 #define RTL8225z2_ANAPARAM2_OFF 0x72003f70 -//by amy for power save +/* by amy for power save */ #define RF_CHANGE_BY_HW BIT30 #define RF_CHANGE_BY_PS BIT29 #define RF_CHANGE_BY_IPS BIT28 -//by amy for power save -//by amy for antenna +/* by amy for power save */ +/* by amy for antenna */ #define EEPROM_SW_REVD_OFFSET 0x3f -// BIT[8-9] is for SW Antenna Diversity. Only the value EEPROM_SW_AD_ENABLE means enable, other values are diable. +/* BIT[8-9] is for SW Antenna Diversity. Only the value EEPROM_SW_AD_ENABLE means enable, other values are diable. */ #define EEPROM_SW_AD_MASK 0x0300 #define EEPROM_SW_AD_ENABLE 0x0100 -// BIT[10-11] determine if Antenna 1 is the Default Antenna. Only the value EEPROM_DEF_ANT_1 means TRUE, other values are FALSE. +/* BIT[10-11] determine if Antenna 1 is the Default Antenna. Only the value EEPROM_DEF_ANT_1 means TRUE, other values are FALSE. */ #define EEPROM_DEF_ANT_MASK 0x0C00 #define EEPROM_DEF_ANT_1 0x0400 -//by amy for antenna -//{by amy 080312 -//0x7C, 0x7D Crystal calibration and Tx Power tracking mechanism. Added by Roger. 2007.12.10. +/*by amy for antenna */ +/* {by amy 080312 */ +/* 0x7C, 0x7D Crystal calibration and Tx Power tracking mechanism. Added by Roger. 2007.12.10. */ #define EEPROM_RSV 0x7C -#define EEPROM_XTAL_CAL_XOUT_MASK 0x0F // 0x7C[3:0], Crystal calibration for Xout. -#define EEPROM_XTAL_CAL_XIN_MASK 0xF0 // 0x7C[7:4], Crystal calibration for Xin. -#define EEPROM_THERMAL_METER_MASK 0x0F00 // 0x7D[3:0], Thermal meter reference level. -#define EEPROM_XTAL_CAL_ENABLE 0x1000 // 0x7D[4], Crystal calibration enabled/disabled BIT. -#define EEPROM_THERMAL_METER_ENABLE 0x2000 // 0x7D[5], Thermal meter enabled/disabled BIT. -#define EN_LPF_CAL 0x238 // Enable LPF Calibration. +#define EEPROM_XTAL_CAL_XOUT_MASK 0x0F /* 0x7C[3:0], Crystal calibration for Xout. */ +#define EEPROM_XTAL_CAL_XIN_MASK 0xF0 /* 0x7C[7:4], Crystal calibration for Xin. */ +#define EEPROM_THERMAL_METER_MASK 0x0F00 /* 0x7D[3:0], Thermal meter reference level. */ +#define EEPROM_XTAL_CAL_ENABLE 0x1000 /* 0x7D[4], Crystal calibration enabled/disabled BIT. */ +#define EEPROM_THERMAL_METER_ENABLE 0x2000 /* 0x7D[5], Thermal meter enabled/disabled BIT. */ +#define EN_LPF_CAL 0x238 /* Enable LPF Calibration. */ #define PWR_METER_EN BIT1 -// where are false alarm counters in 8185B? +/* where are false alarm counters in 8185B? */ #define CCK_FALSE_ALARM 0xD0 -//by amy 080312} +/* by amy 080312} */ -//YJ,add for Country IE, 080630 +/* YJ,add for Country IE, 080630 */ #define EEPROM_COUNTRY_CODE 0x2E -//YJ,add,080630,end +/* YJ,add,080630,end */ #endif -- 2.20.1