From 33b18a602525198ab8892789dab6839f325407f8 Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Wed, 13 Dec 2006 00:35:50 -0800 Subject: [PATCH] [PATCH] ide: fix HPT3xx hotswap support Fix the broken hotswap code: on HPT37x it caused RESET- to glitch when tristating the bus (the MISC control 3/6 and soft control 2 need to be written to in the certain order), and for HPT36x the obsolete HDIO_TRISTATE_HWIF ioctl() handler was called instead which treated the state argument wrong. Also, get rid of the soft control reg. 1 wtite to enable IDE interrupt -- this is done in init_hpt37x() already... Have been tested on HPT370 and 371N. Signed-off-by: Sergei Shtylyov Cc: Bartlomiej Zolnierkiewicz Cc: Alan Cox Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/ide/pci/hpt366.c | 115 ++++++++++++--------------------------- 1 file changed, 36 insertions(+), 79 deletions(-) diff --git a/drivers/ide/pci/hpt366.c b/drivers/ide/pci/hpt366.c index 787efd35db2b..29a377044323 100644 --- a/drivers/ide/pci/hpt366.c +++ b/drivers/ide/pci/hpt366.c @@ -70,6 +70,8 @@ * - fix/remove bad/unused timing tables and use one set of tables for the whole * HPT37x chip family; save space by introducing the separate transfer mode * table in which the mode lookup is done + * - fix the hotswap code: it caused RESET- to glitch when tristating the bus, + * and for HPT36x the obsolete HDIO_TRISTATE_HWIF handler was called instead * * */ @@ -914,101 +916,68 @@ static void hpt3xxn_rw_disk(ide_drive_t *drive, struct request *rq) hpt3xxn_set_clock(hwif, wantclock); } -/* - * Since SUN Cobalt is attempting to do this operation, I should disclose - * this has been a long time ago Thu Jul 27 16:40:57 2000 was the patch date - * HOTSWAP ATA Infrastructure. - */ - -static void hpt3xx_reset (ide_drive_t *drive) -{ -} - -static int hpt3xx_tristate (ide_drive_t * drive, int state) -{ - ide_hwif_t *hwif = HWIF(drive); - struct pci_dev *dev = hwif->pci_dev; - u8 reg59h = 0, reset = (hwif->channel) ? 0x80 : 0x40; - u8 regXXh = 0, state_reg= (hwif->channel) ? 0x57 : 0x53; - - pci_read_config_byte(dev, 0x59, ®59h); - pci_read_config_byte(dev, state_reg, ®XXh); - - if (state) { - (void) ide_do_reset(drive); - pci_write_config_byte(dev, state_reg, regXXh|0x80); - pci_write_config_byte(dev, 0x59, reg59h|reset); - } else { - pci_write_config_byte(dev, 0x59, reg59h & ~(reset)); - pci_write_config_byte(dev, state_reg, regXXh & ~(0x80)); - (void) ide_do_reset(drive); - } - return 0; -} - /* - * set/get power state for a drive. - * turning the power off does the following things: - * 1) soft-reset the drive - * 2) tri-states the ide bus + * Set/get power state for a drive. * - * when we turn things back on, we need to re-initialize things. + * When we turn the power back on, we need to re-initialize things. */ #define TRISTATE_BIT 0x8000 -static int hpt370_busproc(ide_drive_t * drive, int state) + +static int hpt3xx_busproc(ide_drive_t *drive, int state) { ide_hwif_t *hwif = drive->hwif; struct pci_dev *dev = hwif->pci_dev; - u8 tristate = 0, resetmask = 0, bus_reg = 0; - u16 tri_reg; + u8 tristate, resetmask, bus_reg = 0; + u16 tri_reg = 0; hwif->bus_state = state; if (hwif->channel) { /* secondary channel */ - tristate = 0x56; - resetmask = 0x80; + tristate = 0x56; + resetmask = 0x80; } else { /* primary channel */ - tristate = 0x52; + tristate = 0x52; resetmask = 0x40; } - /* grab status */ + /* Grab the status. */ pci_read_config_word(dev, tristate, &tri_reg); pci_read_config_byte(dev, 0x59, &bus_reg); - /* set the state. we don't set it if we don't need to do so. - * make sure that the drive knows that it has failed if it's off */ + /* + * Set the state. We don't set it if we don't need to do so. + * Make sure that the drive knows that it has failed if it's off. + */ switch (state) { case BUSSTATE_ON: - hwif->drives[0].failures = 0; - hwif->drives[1].failures = 0; - if ((bus_reg & resetmask) == 0) + if (!(bus_reg & resetmask)) return 0; - tri_reg &= ~TRISTATE_BIT; - bus_reg &= ~resetmask; - break; + hwif->drives[0].failures = hwif->drives[1].failures = 0; + + pci_write_config_byte(dev, 0x59, bus_reg & ~resetmask); + pci_write_config_word(dev, tristate, tri_reg & ~TRISTATE_BIT); + return 0; case BUSSTATE_OFF: - hwif->drives[0].failures = hwif->drives[0].max_failures + 1; - hwif->drives[1].failures = hwif->drives[1].max_failures + 1; - if ((tri_reg & TRISTATE_BIT) == 0 && (bus_reg & resetmask)) + if ((bus_reg & resetmask) && !(tri_reg & TRISTATE_BIT)) return 0; tri_reg &= ~TRISTATE_BIT; - bus_reg |= resetmask; break; case BUSSTATE_TRISTATE: - hwif->drives[0].failures = hwif->drives[0].max_failures + 1; - hwif->drives[1].failures = hwif->drives[1].max_failures + 1; - if ((tri_reg & TRISTATE_BIT) && (bus_reg & resetmask)) + if ((bus_reg & resetmask) && (tri_reg & TRISTATE_BIT)) return 0; tri_reg |= TRISTATE_BIT; - bus_reg |= resetmask; break; + default: + return -EINVAL; } - pci_write_config_byte(dev, 0x59, bus_reg); - pci_write_config_word(dev, tristate, tri_reg); + hwif->drives[0].failures = hwif->drives[0].max_failures + 1; + hwif->drives[1].failures = hwif->drives[1].max_failures + 1; + + pci_write_config_word(dev, tristate, tri_reg); + pci_write_config_byte(dev, 0x59, bus_reg | resetmask); return 0; } @@ -1306,23 +1275,11 @@ static void __devinit init_hwif_hpt366(ide_hwif_t *hwif) if (serialize && hwif->mate) hwif->serialized = hwif->mate->serialized = 1; - if (info->revision >= 3) { - u8 reg5ah = 0; - pci_write_config_byte(dev, 0x5a, reg5ah & ~0x10); - /* - * set up ioctl for power status. - * note: power affects both - * drives on each channel - */ - hwif->resetproc = &hpt3xx_reset; - hwif->busproc = &hpt370_busproc; - } else if (info->revision >= 2) { - hwif->resetproc = &hpt3xx_reset; - hwif->busproc = &hpt3xx_tristate; - } else { - hwif->resetproc = &hpt3xx_reset; - hwif->busproc = &hpt3xx_tristate; - } + /* + * Set up ioctl for power status. + * NOTE: power affects both drives on each channel. + */ + hwif->busproc = &hpt3xx_busproc; if (!hwif->dma_base) { hwif->drives[0].autotune = 1; -- 2.20.1