From 323206a1d5bb01883c3d81d163e4091904a92475 Mon Sep 17 00:00:00 2001 From: Sam Ravnborg Date: Fri, 11 May 2012 11:35:15 +0000 Subject: [PATCH] sparc32: drop sun4c bits from head_32.S As we no longer support sun4c we can remove all the code to support remapping the kernel in head_32.S. We also try to tell the user that the machine is not support, in case someone try to boot the kernel on a sun4c one day Signed-off-by: Sam Ravnborg Signed-off-by: David S. Miller --- arch/sparc/kernel/head_32.S | 148 +++++------------------------------- 1 file changed, 19 insertions(+), 129 deletions(-) diff --git a/arch/sparc/kernel/head_32.S b/arch/sparc/kernel/head_32.S index 0e23ff36a419..85623f9da6ff 100644 --- a/arch/sparc/kernel/head_32.S +++ b/arch/sparc/kernel/head_32.S @@ -63,8 +63,8 @@ cputypvar_sun4m: .align 4 -sun4_notsup: - .asciz "Sparc-Linux sun4 support does no longer exist.\n\n" +sun4c_notsup: + .asciz "Sparc-Linux sun4/sun4c support does no longer exist.\n\n" .align 4 sun4e_notsup: @@ -520,10 +520,10 @@ copy_prom_lvl14: ldd [%g2 + 0x8], %g4 std %g4, [%g3 + 0x8] ! Copy proms handler -/* Must determine whether we are on a sun4c MMU, SRMMU, or SUN4/400 MUTANT - * MMU so we can remap ourselves properly. DON'T TOUCH %l0 thru %l5 in these - * remapping routines, we need their values afterwards! +/* DON'T TOUCH %l0 thru %l5 in these remapping routines, + * we need their values afterwards! */ + /* Now check whether we are already mapped, if we * are we can skip all this garbage coming up. */ @@ -532,26 +532,6 @@ copy_prom_done: be go_to_highmem ! this will be a nop then nop - set LOAD_ADDR, %g6 - cmp %g7, %g6 - bne remap_not_a_sun4 ! This is not a Sun4 - nop - - or %g0, 0x1, %g1 - lduba [%g1] ASI_CONTROL, %g1 ! Only safe to try on Sun4. - subcc %g1, 0x24, %g0 ! Is this a mutant Sun4/400??? - be sun4_mutant_remap ! Ugh, it is... - nop - - b sun4_normal_remap ! regular sun4, 2 level mmu - nop - -remap_not_a_sun4: - lda [%g0] ASI_M_MMUREGS, %g1 ! same as ASI_PTE on sun4c - and %g1, 0x1, %g1 ! Test SRMMU Enable bit ;-) - cmp %g1, 0x0 - be sun4c_remap ! A sun4c MMU or normal Sun4 - nop srmmu_remap: /* First, check for a viking (TI) module. */ set 0x40000000, %g2 @@ -657,72 +637,6 @@ srmmu_nviking: b go_to_highmem nop ! wheee.... - /* This remaps the kernel on Sun4/4xx machines - * that have the Sun Mutant Three Level MMU. - * It's like a platypus, Sun didn't have the - * SRMMU in conception so they kludged the three - * level logic in the regular Sun4 MMU probably. - * - * Basically, you take each entry in the top level - * directory that maps the low 3MB starting at - * address zero and put the mapping in the KERNBASE - * slots. These top level pgd's are called regmaps. - */ -sun4_mutant_remap: - or %g0, %g0, %g3 ! source base - sethi %hi(KERNBASE), %g4 ! destination base - or %g4, %lo(KERNBASE), %g4 - sethi %hi(0x300000), %g5 - or %g5, %lo(0x300000), %g5 ! upper bound 3MB - or %g0, 0x1, %l6 - sll %l6, 24, %l6 ! Regmap mapping size - add %g3, 0x2, %g3 ! Base magic - add %g4, 0x2, %g4 ! Base magic - - /* Main remapping loop on Sun4-Mutant-MMU. - * "I am not an animal..." -Famous Mutant Person - */ -sun4_mutant_loop: - lduha [%g3] ASI_REGMAP, %g2 ! Get lower entry - stha %g2, [%g4] ASI_REGMAP ! Store in high entry - add %g4, %l6, %g4 ! Move up high memory ptr - subcc %g3, %g5, %g0 ! Reached our limit? - blu sun4_mutant_loop ! Nope, loop again - add %g3, %l6, %g3 ! delay, Move up low ptr - b go_to_highmem ! Jump to high memory. - nop - - /* The following is for non-4/4xx sun4 MMU's. */ -sun4_normal_remap: - mov 0, %g3 ! source base - set KERNBASE, %g4 ! destination base - set 0x300000, %g5 ! upper bound 3MB - mov 1, %l6 - sll %l6, 18, %l6 ! sun4 mmu segmap size -sun4_normal_loop: - lduha [%g3] ASI_SEGMAP, %g6 ! load phys_seg - stha %g6, [%g4] ASI_SEGMAP ! stort new virt mapping - add %g3, %l6, %g3 ! increment source pointer - subcc %g3, %g5, %g0 ! reached limit? - blu sun4_normal_loop ! nope, loop again - add %g4, %l6, %g4 ! delay, increment dest ptr - b go_to_highmem - nop - - /* The following works for Sun4c MMU's */ -sun4c_remap: - mov 0, %g3 ! source base - set KERNBASE, %g4 ! destination base - set 0x300000, %g5 ! upper bound 3MB - mov 1, %l6 - sll %l6, 18, %l6 ! sun4c mmu segmap size -sun4c_remap_loop: - lda [%g3] ASI_SEGMAP, %g6 ! load phys_seg - sta %g6, [%g4] ASI_SEGMAP ! store new virt mapping - add %g3, %l6, %g3 ! Increment source ptr - subcc %g3, %g5, %g0 ! Reached limit? - bl sun4c_remap_loop ! Nope, loop again - add %g4, %l6, %g4 ! delay, Increment dest ptr /* Now do a non-relative jump so that PC is in high-memory */ go_to_highmem: @@ -759,16 +673,6 @@ execute_in_high_mem: be found_version nop -/* Old sun4's pass our load address into %o0 instead of the prom - * pointer. On sun4's you have to hard code the romvec pointer into - * your code. Sun probably still does that because they don't even - * trust their own "OpenBoot" specifications. - */ - set LOAD_ADDR, %g6 - cmp %o0, %g6 ! an old sun4? - be sun4_init - nop - found_version: /* Get the machine type via the mysterious romvec node operations. */ @@ -823,16 +727,16 @@ got_prop: /* Update boot_cpu_id only on boot cpu */ stub %g1, [%g2 + %lo(boot_cpu_id)] - ba sun4c_continue_boot + ba continue_boot nop #endif set cputypval, %o2 ldub [%o2 + 0x4], %l1 cmp %l1, ' ' - be 1f + be no_sun4c_here cmp %l1, 'c' - be 1f + be no_sun4c_here cmp %l1, 'm' be 1f cmp %l1, 's' @@ -847,19 +751,12 @@ got_prop: 1: set cputypval, %l1 ldub [%l1 + 0x4], %l1 - cmp %l1, 'm' ! Test for sun4d, sun4e ? - be sun4m_init - cmp %l1, 's' ! Treat sun4s as sun4m - be sun4m_init - cmp %l1, 'd' ! Let us see how the beast will die + cmp %l1, 'd' ! Let us see how the beast will die be sun4d_init nop - /* Jump into mmu context zero. */ - set AC_CONTEXT, %g1 - stba %g0, [%g1] ASI_CONTROL - - b sun4c_continue_boot + /* If not sun4d assume sun4m */ + b sun4m_init nop /* CPUID in bootbus can be found at PA 0xff0140000 */ @@ -959,7 +856,7 @@ sun4m_init: srl %o1, 28, %o1 ! Get a type of the CPU subcc %o1, 4, %g0 ! TI: Viking or MicroSPARC - be sun4c_continue_boot + be continue_boot nop set AC_M_SFSR, %o0 @@ -969,7 +866,7 @@ sun4m_init: /* Fujitsu MicroSPARC-II has no asynchronous flavors of FARs */ subcc %o1, 0, %g0 - be sun4c_continue_boot + be continue_boot nop set AC_M_AFSR, %o0 @@ -979,8 +876,7 @@ sun4m_init: nop -sun4c_continue_boot: - +continue_boot: /* Aieee, now set PC and nPC, enable traps, give ourselves a stack and it's * show-time! @@ -1161,18 +1057,12 @@ sun4c_continue_boot: /* We should not get here. */ call halt_me nop - -sun4_init: - sethi %hi(SUN4_PROM_VECTOR+0x84), %o1 - ld [%o1 + %lo(SUN4_PROM_VECTOR+0x84)], %o1 - set sun4_notsup, %o0 - call %o1 /* printf */ - nop - sethi %hi(SUN4_PROM_VECTOR+0xc4), %o1 - ld [%o1 + %lo(SUN4_PROM_VECTOR+0xc4)], %o1 - call %o1 /* exittomon */ +no_sun4c_here: + ld [%g7 + 0x68], %o1 + set sun4c_notsup, %o0 + call %o1 nop -1: ba 1b ! Cannot exit into KMON + b halt_me nop no_sun4e_here: -- 2.20.1