From 31dbe5b4ac6fca72dec946e4d0fa7f0913f1d9b1 Mon Sep 17 00:00:00 2001 From: Bruce Allan Date: Thu, 6 Jan 2011 14:29:52 +0000 Subject: [PATCH] e1000e: power off PHY after reset when interface is down Some Phys supported by the driver do not remain powered off across a reset of the device when the interface is down, e.g. on 82571, but not on 82574. This patch powers down (only when WoL is disabled) the PHY after a reset if the interface is down and the ethtool diagnostics are not currently running. The ethtool diagnostic function required a minor re-factor as a result, and the e1000_[get|put]_hw_control() functions are renamed since they are no longer static to netdev.c as they are needed by the ethtool diagnostics. A couple minor whitespace issues were cleaned up, too. Reported-by: Arthur Jones Signed-off-by: Bruce Allan Tested-by: Jeff Pieper Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/e1000e/e1000.h | 2 ++ drivers/net/e1000e/ethtool.c | 40 +++++++++++++++++++------------ drivers/net/e1000e/netdev.c | 46 ++++++++++++++++++++---------------- 3 files changed, 53 insertions(+), 35 deletions(-) diff --git a/drivers/net/e1000e/e1000.h b/drivers/net/e1000e/e1000.h index 4b3802ae1082..5255be753746 100644 --- a/drivers/net/e1000e/e1000.h +++ b/drivers/net/e1000e/e1000.h @@ -497,6 +497,8 @@ extern void e1000e_free_tx_resources(struct e1000_adapter *adapter); extern void e1000e_update_stats(struct e1000_adapter *adapter); extern void e1000e_set_interrupt_capability(struct e1000_adapter *adapter); extern void e1000e_reset_interrupt_capability(struct e1000_adapter *adapter); +extern void e1000e_get_hw_control(struct e1000_adapter *adapter); +extern void e1000e_release_hw_control(struct e1000_adapter *adapter); extern void e1000e_disable_aspm(struct pci_dev *pdev, u16 state); extern unsigned int copybreak; diff --git a/drivers/net/e1000e/ethtool.c b/drivers/net/e1000e/ethtool.c index c942ccab8bca..f8ed03dab9b1 100644 --- a/drivers/net/e1000e/ethtool.c +++ b/drivers/net/e1000e/ethtool.c @@ -1708,6 +1708,19 @@ static void e1000_diag_test(struct net_device *netdev, bool if_running = netif_running(netdev); set_bit(__E1000_TESTING, &adapter->state); + + if (!if_running) { + /* Get control of and reset hardware */ + if (adapter->flags & FLAG_HAS_AMT) + e1000e_get_hw_control(adapter); + + e1000e_power_up_phy(adapter); + + adapter->hw.phy.autoneg_wait_to_complete = 1; + e1000e_reset(adapter); + adapter->hw.phy.autoneg_wait_to_complete = 0; + } + if (eth_test->flags == ETH_TEST_FL_OFFLINE) { /* Offline tests */ @@ -1721,8 +1734,6 @@ static void e1000_diag_test(struct net_device *netdev, if (if_running) /* indicate we're in test mode */ dev_close(netdev); - else - e1000e_reset(adapter); if (e1000_reg_test(adapter, &data[0])) eth_test->flags |= ETH_TEST_FL_FAILED; @@ -1736,8 +1747,6 @@ static void e1000_diag_test(struct net_device *netdev, eth_test->flags |= ETH_TEST_FL_FAILED; e1000e_reset(adapter); - /* make sure the phy is powered up */ - e1000e_power_up_phy(adapter); if (e1000_loopback_test(adapter, &data[3])) eth_test->flags |= ETH_TEST_FL_FAILED; @@ -1759,28 +1768,29 @@ static void e1000_diag_test(struct net_device *netdev, if (if_running) dev_open(netdev); } else { - if (!if_running && (adapter->flags & FLAG_HAS_AMT)) { - clear_bit(__E1000_TESTING, &adapter->state); - dev_open(netdev); - set_bit(__E1000_TESTING, &adapter->state); - } + /* Online tests */ e_info("online testing starting\n"); - /* Online tests */ - if (e1000_link_test(adapter, &data[4])) - eth_test->flags |= ETH_TEST_FL_FAILED; - /* Online tests aren't run; pass by default */ + /* register, eeprom, intr and loopback tests not run online */ data[0] = 0; data[1] = 0; data[2] = 0; data[3] = 0; - if (!if_running && (adapter->flags & FLAG_HAS_AMT)) - dev_close(netdev); + if (e1000_link_test(adapter, &data[4])) + eth_test->flags |= ETH_TEST_FL_FAILED; clear_bit(__E1000_TESTING, &adapter->state); } + + if (!if_running) { + e1000e_reset(adapter); + + if (adapter->flags & FLAG_HAS_AMT) + e1000e_release_hw_control(adapter); + } + msleep_interruptible(4 * 1000); } diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c index 98729a6fb096..fa5b60452547 100644 --- a/drivers/net/e1000e/netdev.c +++ b/drivers/net/e1000e/netdev.c @@ -1980,15 +1980,15 @@ static void e1000_irq_enable(struct e1000_adapter *adapter) } /** - * e1000_get_hw_control - get control of the h/w from f/w + * e1000e_get_hw_control - get control of the h/w from f/w * @adapter: address of board private structure * - * e1000_get_hw_control sets {CTRL_EXT|SWSM}:DRV_LOAD bit. + * e1000e_get_hw_control sets {CTRL_EXT|SWSM}:DRV_LOAD bit. * For ASF and Pass Through versions of f/w this means that * the driver is loaded. For AMT version (only with 82573) * of the f/w this means that the network i/f is open. **/ -static void e1000_get_hw_control(struct e1000_adapter *adapter) +void e1000e_get_hw_control(struct e1000_adapter *adapter) { struct e1000_hw *hw = &adapter->hw; u32 ctrl_ext; @@ -2005,16 +2005,16 @@ static void e1000_get_hw_control(struct e1000_adapter *adapter) } /** - * e1000_release_hw_control - release control of the h/w to f/w + * e1000e_release_hw_control - release control of the h/w to f/w * @adapter: address of board private structure * - * e1000_release_hw_control resets {CTRL_EXT|SWSM}:DRV_LOAD bit. + * e1000e_release_hw_control resets {CTRL_EXT|SWSM}:DRV_LOAD bit. * For ASF and Pass Through versions of f/w this means that the * driver is no longer loaded. For AMT version (only with 82573) i * of the f/w this means that the network i/f is closed. * **/ -static void e1000_release_hw_control(struct e1000_adapter *adapter) +void e1000e_release_hw_control(struct e1000_adapter *adapter) { struct e1000_hw *hw = &adapter->hw; u32 ctrl_ext; @@ -2445,7 +2445,7 @@ static void e1000_vlan_rx_kill_vid(struct net_device *netdev, u16 vid) E1000_MNG_DHCP_COOKIE_STATUS_VLAN) && (vid == adapter->mng_vlan_id)) { /* release control to f/w */ - e1000_release_hw_control(adapter); + e1000e_release_hw_control(adapter); return; } @@ -3187,7 +3187,6 @@ void e1000e_reset(struct e1000_adapter *adapter) ew32(PBA, pba); } - /* * flow control settings * @@ -3275,7 +3274,7 @@ void e1000e_reset(struct e1000_adapter *adapter) * that the network interface is in control */ if (adapter->flags & FLAG_HAS_AMT) - e1000_get_hw_control(adapter); + e1000e_get_hw_control(adapter); ew32(WUC, 0); @@ -3288,6 +3287,13 @@ void e1000e_reset(struct e1000_adapter *adapter) ew32(VET, ETH_P_8021Q); e1000e_reset_adaptive(hw); + + if (!netif_running(adapter->netdev) && + !test_bit(__E1000_TESTING, &adapter->state)) { + e1000_power_down_phy(adapter); + return; + } + e1000_get_phy_info(hw); if ((adapter->flags & FLAG_HAS_SMART_POWER_DOWN) && @@ -3573,7 +3579,7 @@ static int e1000_open(struct net_device *netdev) * interface is now open and reset the part to a known state. */ if (adapter->flags & FLAG_HAS_AMT) { - e1000_get_hw_control(adapter); + e1000e_get_hw_control(adapter); e1000e_reset(adapter); } @@ -3637,7 +3643,7 @@ static int e1000_open(struct net_device *netdev) return 0; err_req_irq: - e1000_release_hw_control(adapter); + e1000e_release_hw_control(adapter); e1000_power_down_phy(adapter); e1000e_free_rx_resources(adapter); err_setup_rx: @@ -3692,8 +3698,9 @@ static int e1000_close(struct net_device *netdev) * If AMT is enabled, let the firmware know that the network * interface is now closed */ - if (adapter->flags & FLAG_HAS_AMT) - e1000_release_hw_control(adapter); + if ((adapter->flags & FLAG_HAS_AMT) && + !test_bit(__E1000_TESTING, &adapter->state)) + e1000e_release_hw_control(adapter); if ((adapter->flags & FLAG_HAS_ERT) || (adapter->hw.mac.type == e1000_pch2lan)) @@ -5212,7 +5219,7 @@ static int __e1000_shutdown(struct pci_dev *pdev, bool *enable_wake, * Release control of h/w to f/w. If f/w is AMT enabled, this * would have already happened in close and is redundant. */ - e1000_release_hw_control(adapter); + e1000e_release_hw_control(adapter); pci_disable_device(pdev); @@ -5369,7 +5376,7 @@ static int __e1000_resume(struct pci_dev *pdev) * under the control of the driver. */ if (!(adapter->flags & FLAG_HAS_AMT)) - e1000_get_hw_control(adapter); + e1000e_get_hw_control(adapter); return 0; } @@ -5616,7 +5623,7 @@ static void e1000_io_resume(struct pci_dev *pdev) * under the control of the driver. */ if (!(adapter->flags & FLAG_HAS_AMT)) - e1000_get_hw_control(adapter); + e1000e_get_hw_control(adapter); } @@ -5966,7 +5973,7 @@ static int __devinit e1000_probe(struct pci_dev *pdev, * under the control of the driver. */ if (!(adapter->flags & FLAG_HAS_AMT)) - e1000_get_hw_control(adapter); + e1000e_get_hw_control(adapter); strncpy(netdev->name, "eth%d", sizeof(netdev->name) - 1); err = register_netdev(netdev); @@ -5985,12 +5992,11 @@ static int __devinit e1000_probe(struct pci_dev *pdev, err_register: if (!(adapter->flags & FLAG_HAS_AMT)) - e1000_release_hw_control(adapter); + e1000e_release_hw_control(adapter); err_eeprom: if (!e1000_check_reset_block(&adapter->hw)) e1000_phy_hw_reset(&adapter->hw); err_hw_init: - kfree(adapter->tx_ring); kfree(adapter->rx_ring); err_sw_init: @@ -6056,7 +6062,7 @@ static void __devexit e1000_remove(struct pci_dev *pdev) * Release control of h/w to f/w. If f/w is AMT enabled, this * would have already happened in close and is redundant. */ - e1000_release_hw_control(adapter); + e1000e_release_hw_control(adapter); e1000e_reset_interrupt_capability(adapter); kfree(adapter->tx_ring); -- 2.20.1