From 30ecad77fe849b60c9a1f8df24dca50e3f083d41 Mon Sep 17 00:00:00 2001 From: Daniel Vetter Date: Wed, 9 Dec 2015 09:29:36 +0100 Subject: [PATCH] drm: Move drm_display_mode an related docs into kerneldoc MIME-Version: 1.0 Content-Type: text/plain; charset=utf8 Content-Transfer-Encoding: 8bit This was in the documentation for modeset helper hooks, where it is a bit misplaced. v2: Reindent the drm_mode_status enum, inspired by Ville. v3: Suggestions from Ville and Thierry. v4: Small fixup that 0day spotted. v5: Slight change to avoid accidental headings in kerneldoc output. Cc: ville.syrjala@linux.intel.com Signed-off-by: Daniel Vetter Link: http://patchwork.freedesktop.org/patch/msgid/1449218769-16577-27-git-send-email-daniel.vetter@ffwll.ch Reviewed-by: Ville Syrjälä (v3) Reviewed-by: Thierry Reding (v3) --- Documentation/DocBook/gpu.tmpl | 192 ------------------ drivers/gpu/drm/drm_modes.c | 3 +- drivers/gpu/drm/i915/i915_gem.c | 4 + include/drm/drm_modes.h | 343 +++++++++++++++++++++++++++----- 4 files changed, 302 insertions(+), 240 deletions(-) diff --git a/Documentation/DocBook/gpu.tmpl b/Documentation/DocBook/gpu.tmpl index 0ca010da4bdf..749b8e2f2113 100644 --- a/Documentation/DocBook/gpu.tmpl +++ b/Documentation/DocBook/gpu.tmpl @@ -1757,198 +1757,6 @@ void intel_crt_init(struct drm_device *dev) connector_status_connected. There is no need to call drm_add_edid_modes manually in that case. - - When adding modes manually the driver creates each mode with a call to - drm_mode_create and must fill the following fields. - - - __u32 type; - - Mode type bitmask, a combination of - - - DRM_MODE_TYPE_BUILTIN - not used? - - - DRM_MODE_TYPE_CLOCK_C - not used? - - - DRM_MODE_TYPE_CRTC_C - not used? - - - - DRM_MODE_TYPE_PREFERRED - The preferred mode for the connector - - - not used? - - - - DRM_MODE_TYPE_DEFAULT - not used? - - - DRM_MODE_TYPE_USERDEF - not used? - - - DRM_MODE_TYPE_DRIVER - - - The mode has been created by the driver (as opposed to - to user-created modes). - - - - - Drivers must set the DRM_MODE_TYPE_DRIVER bit for all modes they - create, and set the DRM_MODE_TYPE_PREFERRED bit for the preferred - mode. - - - - __u32 clock; - Pixel clock frequency in kHz unit - - - __u16 hdisplay, hsync_start, hsync_end, htotal; - __u16 vdisplay, vsync_start, vsync_end, vtotal; - Horizontal and vertical timing information - <----------------><-------------><--------------> - - //////////////////////| - ////////////////////// | - ////////////////////// |.................. ................ - _______________ - - <----- [hv]display -----> - <------------- [hv]sync_start ------------> - <--------------------- [hv]sync_end ---------------------> - <-------------------------------- [hv]total -----------------------------> -]]> - - - __u16 hskew; - __u16 vscan; - Unknown - - - __u32 flags; - - Mode flags, a combination of - - - DRM_MODE_FLAG_PHSYNC - - Horizontal sync is active high - - - - DRM_MODE_FLAG_NHSYNC - - Horizontal sync is active low - - - - DRM_MODE_FLAG_PVSYNC - - Vertical sync is active high - - - - DRM_MODE_FLAG_NVSYNC - - Vertical sync is active low - - - - DRM_MODE_FLAG_INTERLACE - - Mode is interlaced - - - - DRM_MODE_FLAG_DBLSCAN - - Mode uses doublescan - - - - DRM_MODE_FLAG_CSYNC - - Mode uses composite sync - - - - DRM_MODE_FLAG_PCSYNC - - Composite sync is active high - - - - DRM_MODE_FLAG_NCSYNC - - Composite sync is active low - - - - DRM_MODE_FLAG_HSKEW - - hskew provided (not used?) - - - - DRM_MODE_FLAG_BCAST - - not used? - - - - DRM_MODE_FLAG_PIXMUX - - not used? - - - - DRM_MODE_FLAG_DBLCLK - - not used? - - - - DRM_MODE_FLAG_CLKDIV2 - - ? - - - - - - Note that modes marked with the INTERLACE or DBLSCAN flags will be - filtered out by - drm_helper_probe_single_connector_modes if - the connector's interlace_allowed or - doublescan_allowed field is set to 0. - - - - char name[DRM_DISPLAY_MODE_LEN]; - - Mode name. The driver must call - drm_mode_set_name to fill the mode name from - hdisplay, - vdisplay and interlace flag after - filling the corresponding fields. - - - - The vrefresh value is computed by drm_helper_probe_single_connector_modes. diff --git a/drivers/gpu/drm/drm_modes.c b/drivers/gpu/drm/drm_modes.c index ef6bd3656548..1892e615528a 100644 --- a/drivers/gpu/drm/drm_modes.c +++ b/drivers/gpu/drm/drm_modes.c @@ -708,7 +708,8 @@ void drm_mode_set_name(struct drm_display_mode *mode) } EXPORT_SYMBOL(drm_mode_set_name); -/** drm_mode_hsync - get the hsync of a mode +/** + * drm_mode_hsync - get the hsync of a mode * @mode: mode * * Returns: diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index a6997a8a3eaa..f98738925ed9 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -2949,6 +2949,10 @@ i915_gem_idle_work_handler(struct work_struct *work) if (!list_empty(&ring->request_list)) return; + /* we probably should sync with hangcheck here, using cancel_work_sync. + * Also locking seems to be fubar here, ring->request_list is protected + * by dev->struct_mutex. */ + intel_mark_idle(dev); if (mutex_trylock(&dev->struct_mutex)) { diff --git a/include/drm/drm_modes.h b/include/drm/drm_modes.h index f9115aee43f4..9e6d7a1cd19b 100644 --- a/include/drm/drm_modes.h +++ b/include/drm/drm_modes.h @@ -35,46 +35,91 @@ * structures). */ +/** + * enum drm_mode_status - hardware support status of a mode + * @MODE_OK: Mode OK + * @MODE_HSYNC: hsync out of range + * @MODE_VSYNC: vsync out of range + * @MODE_H_ILLEGAL: mode has illegal horizontal timings + * @MODE_V_ILLEGAL: mode has illegal horizontal timings + * @MODE_BAD_WIDTH: requires an unsupported linepitch + * @MODE_NOMODE: no mode with a matching name + * @MODE_NO_INTERLACE: interlaced mode not supported + * @MODE_NO_DBLESCAN: doublescan mode not supported + * @MODE_NO_VSCAN: multiscan mode not supported + * @MODE_MEM: insufficient video memory + * @MODE_VIRTUAL_X: mode width too large for specified virtual size + * @MODE_VIRTUAL_Y: mode height too large for specified virtual size + * @MODE_MEM_VIRT: insufficient video memory given virtual size + * @MODE_NOCLOCK: no fixed clock available + * @MODE_CLOCK_HIGH: clock required is too high + * @MODE_CLOCK_LOW: clock required is too low + * @MODE_CLOCK_RANGE: clock/mode isn't in a ClockRange + * @MODE_BAD_HVALUE: horizontal timing was out of range + * @MODE_BAD_VVALUE: vertical timing was out of range + * @MODE_BAD_VSCAN: VScan value out of range + * @MODE_HSYNC_NARROW: horizontal sync too narrow + * @MODE_HSYNC_WIDE: horizontal sync too wide + * @MODE_HBLANK_NARROW: horizontal blanking too narrow + * @MODE_HBLANK_WIDE: horizontal blanking too wide + * @MODE_VSYNC_NARROW: vertical sync too narrow + * @MODE_VSYNC_WIDE: vertical sync too wide + * @MODE_VBLANK_NARROW: vertical blanking too narrow + * @MODE_VBLANK_WIDE: vertical blanking too wide + * @MODE_PANEL: exceeds panel dimensions + * @MODE_INTERLACE_WIDTH: width too large for interlaced mode + * @MODE_ONE_WIDTH: only one width is supported + * @MODE_ONE_HEIGHT: only one height is supported + * @MODE_ONE_SIZE: only one resolution is supported + * @MODE_NO_REDUCED: monitor doesn't accept reduced blanking + * @MODE_NO_STEREO: stereo modes not supported + * @MODE_UNVERIFIED: mode needs to reverified + * @MODE_BAD: unspecified reason + * @MODE_ERROR: error condition + * + * This enum is used to filter out modes not supported by the driver/hardware + * combination. + */ enum drm_mode_status { - MODE_OK = 0, /* Mode OK */ - MODE_HSYNC, /* hsync out of range */ - MODE_VSYNC, /* vsync out of range */ - MODE_H_ILLEGAL, /* mode has illegal horizontal timings */ - MODE_V_ILLEGAL, /* mode has illegal horizontal timings */ - MODE_BAD_WIDTH, /* requires an unsupported linepitch */ - MODE_NOMODE, /* no mode with a matching name */ - MODE_NO_INTERLACE, /* interlaced mode not supported */ - MODE_NO_DBLESCAN, /* doublescan mode not supported */ - MODE_NO_VSCAN, /* multiscan mode not supported */ - MODE_MEM, /* insufficient video memory */ - MODE_VIRTUAL_X, /* mode width too large for specified virtual size */ - MODE_VIRTUAL_Y, /* mode height too large for specified virtual size */ - MODE_MEM_VIRT, /* insufficient video memory given virtual size */ - MODE_NOCLOCK, /* no fixed clock available */ - MODE_CLOCK_HIGH, /* clock required is too high */ - MODE_CLOCK_LOW, /* clock required is too low */ - MODE_CLOCK_RANGE, /* clock/mode isn't in a ClockRange */ - MODE_BAD_HVALUE, /* horizontal timing was out of range */ - MODE_BAD_VVALUE, /* vertical timing was out of range */ - MODE_BAD_VSCAN, /* VScan value out of range */ - MODE_HSYNC_NARROW, /* horizontal sync too narrow */ - MODE_HSYNC_WIDE, /* horizontal sync too wide */ - MODE_HBLANK_NARROW, /* horizontal blanking too narrow */ - MODE_HBLANK_WIDE, /* horizontal blanking too wide */ - MODE_VSYNC_NARROW, /* vertical sync too narrow */ - MODE_VSYNC_WIDE, /* vertical sync too wide */ - MODE_VBLANK_NARROW, /* vertical blanking too narrow */ - MODE_VBLANK_WIDE, /* vertical blanking too wide */ - MODE_PANEL, /* exceeds panel dimensions */ - MODE_INTERLACE_WIDTH, /* width too large for interlaced mode */ - MODE_ONE_WIDTH, /* only one width is supported */ - MODE_ONE_HEIGHT, /* only one height is supported */ - MODE_ONE_SIZE, /* only one resolution is supported */ - MODE_NO_REDUCED, /* monitor doesn't accept reduced blanking */ - MODE_NO_STEREO, /* stereo modes not supported */ - MODE_UNVERIFIED = -3, /* mode needs to reverified */ - MODE_BAD = -2, /* unspecified reason */ - MODE_ERROR = -1 /* error condition */ + MODE_OK = 0, + MODE_HSYNC, + MODE_VSYNC, + MODE_H_ILLEGAL, + MODE_V_ILLEGAL, + MODE_BAD_WIDTH, + MODE_NOMODE, + MODE_NO_INTERLACE, + MODE_NO_DBLESCAN, + MODE_NO_VSCAN, + MODE_MEM, + MODE_VIRTUAL_X, + MODE_VIRTUAL_Y, + MODE_MEM_VIRT, + MODE_NOCLOCK, + MODE_CLOCK_HIGH, + MODE_CLOCK_LOW, + MODE_CLOCK_RANGE, + MODE_BAD_HVALUE, + MODE_BAD_VVALUE, + MODE_BAD_VSCAN, + MODE_HSYNC_NARROW, + MODE_HSYNC_WIDE, + MODE_HBLANK_NARROW, + MODE_HBLANK_WIDE, + MODE_VSYNC_NARROW, + MODE_VSYNC_WIDE, + MODE_VBLANK_NARROW, + MODE_VBLANK_WIDE, + MODE_PANEL, + MODE_INTERLACE_WIDTH, + MODE_ONE_WIDTH, + MODE_ONE_HEIGHT, + MODE_ONE_SIZE, + MODE_NO_REDUCED, + MODE_NO_STEREO, + MODE_UNVERIFIED = -3, + MODE_BAD = -2, + MODE_ERROR = -1 }; #define DRM_MODE_TYPE_CLOCK_CRTC_C (DRM_MODE_TYPE_CLOCK_C | \ @@ -96,17 +141,125 @@ enum drm_mode_status { #define DRM_MODE_FLAG_3D_MAX DRM_MODE_FLAG_3D_SIDE_BY_SIDE_HALF +/** + * struct drm_display_mode - DRM kernel-internal display mode structure + * @hdisplay: horizontal display size + * @hsync_start: horizontal sync start + * @hsync_end: horizontal sync end + * @htotal: horizontal total size + * @hskew: horizontal skew?! + * @vdisplay: vertical display size + * @vsync_start: vertical sync start + * @vsync_end: vertical sync end + * @vtotal: vertical total size + * @vscan: vertical scan?! + * @crtc_hdisplay: hardware mode horizontal display size + * @crtc_hblank_start: hardware mode horizontal blank start + * @crtc_hblank_end: hardware mode horizontal blank end + * @crtc_hsync_start: hardware mode horizontal sync start + * @crtc_hsync_end: hardware mode horizontal sync end + * @crtc_htotal: hardware mode horizontal total size + * @crtc_hskew: hardware mode horizontal skew?! + * @crtc_vdisplay: hardware mode vertical display size + * @crtc_vblank_start: hardware mode vertical blank start + * @crtc_vblank_end: hardware mode vertical blank end + * @crtc_vsync_start: hardware mode vertical sync start + * @crtc_vsync_end: hardware mode vertical sync end + * @crtc_vtotal: hardware mode vertical total size + * + * The horizontal and vertical timings are defined per the following diagram. + * + * + * Active Front Sync Back + * Region Porch Porch + * <-----------------------><----------------><-------------><--------------> + * //////////////////////| + * ////////////////////// | + * ////////////////////// |.................. ................ + * _______________ + * <----- [hv]display -----> + * <------------- [hv]sync_start ------------> + * <--------------------- [hv]sync_end ---------------------> + * <-------------------------------- [hv]total ----------------------------->* + * + * This structure contains two copies of timings. First are the plain timings, + * which specify the logical mode, as it would be for a progressive 1:1 scanout + * at the refresh rate userspace can observe through vblank timestamps. Then + * there's the hardware timings, which are corrected for interlacing, + * double-clocking and similar things. They are provided as a convenience, and + * can be appropriately computed using drm_mode_set_crtcinfo(). + */ struct drm_display_mode { - /* Header */ + /** + * @head: + * + * struct list_head for mode lists. + */ struct list_head head; + + /** + * @base: + * + * A display mode is a normal modeset object, possibly including public + * userspace id. + * + * FIXME: + * + * This can probably be removed since the entire concept of userspace + * managing modes explicitly has never landed in upstream kernel mode + * setting support. + */ struct drm_mode_object base; + /** + * @name: + * + * Human-readable name of the mode, filled out with drm_mode_set_name(). + */ char name[DRM_DISPLAY_MODE_LEN]; + /** + * @status: + * + * Status of the mode, used to filter out modes not supported by the + * hardware. See enum &drm_mode_status. + */ enum drm_mode_status status; + + /** + * @type: + * + * A bitmask of flags, mostly about the source of a mode. Possible flags + * are: + * + * - DRM_MODE_TYPE_BUILTIN: Meant for hard-coded modes, effectively + * unused. + * - DRM_MODE_TYPE_PREFERRED: Preferred mode, usually the native + * resolution of an LCD panel. There should only be one preferred + * mode per connector at any given time. + * - DRM_MODE_TYPE_DRIVER: Mode created by the driver, which is all of + * them really. Drivers must set this bit for all modes they create + * and expose to userspace. + * + * Plus a big list of flags which shouldn't be used at all, but are + * still around since these flags are also used in the userspace ABI: + * + * - DRM_MODE_TYPE_DEFAULT: Again a leftover, use + * DRM_MODE_TYPE_PREFERRED instead. + * - DRM_MODE_TYPE_CLOCK_C and DRM_MODE_TYPE_CRTC_C: Define leftovers + * which are stuck around for hysterical raisins only. No one has an + * idea what they were meant for. Don't use. + * - DRM_MODE_TYPE_USERDEF: Mode defined by userspace, again a vestige + * from older kms designs where userspace had to first add a custom + * mode to the kernel's mode list before it could use it. Don't use. + */ unsigned int type; - /* Proposed mode values */ + /** + * @clock: + * + * Pixel clock in kHz. + */ int clock; /* in kHz */ int hdisplay; int hsync_start; @@ -118,14 +271,74 @@ struct drm_display_mode { int vsync_end; int vtotal; int vscan; + /** + * @flags: + * + * Sync and timing flags: + * + * - DRM_MODE_FLAG_PHSYNC: horizontal sync is active high. + * - DRM_MODE_FLAG_NHSYNC: horizontal sync is active low. + * - DRM_MODE_FLAG_PVSYNC: vertical sync is active high. + * - DRM_MODE_FLAG_NVSYNC: vertical sync is active low. + * - DRM_MODE_FLAG_INTERLACE: mode is interlaced. + * - DRM_MODE_FLAG_DBLSCAN: mode uses doublescan. + * - DRM_MODE_FLAG_CSYNC: mode uses composite sync. + * - DRM_MODE_FLAG_PCSYNC: composite sync is active high. + * - DRM_MODE_FLAG_NCSYNC: composite sync is active low. + * - DRM_MODE_FLAG_HSKEW: hskew provided (not used?). + * - DRM_MODE_FLAG_BCAST: not used? + * - DRM_MODE_FLAG_PIXMUX: not used? + * - DRM_MODE_FLAG_DBLCLK: double-clocked mode. + * - DRM_MODE_FLAG_CLKDIV2: half-clocked mode. + * + * Additionally there's flags to specify how 3D modes are packed: + * + * - DRM_MODE_FLAG_3D_NONE: normal, non-3D mode. + * - DRM_MODE_FLAG_3D_FRAME_PACKING: 2 full frames for left and right. + * - DRM_MODE_FLAG_3D_FIELD_ALTERNATIVE: interleaved like fields. + * - DRM_MODE_FLAG_3D_LINE_ALTERNATIVE: interleaved lines. + * - DRM_MODE_FLAG_3D_SIDE_BY_SIDE_FULL: side-by-side full frames. + * - DRM_MODE_FLAG_3D_L_DEPTH: ? + * - DRM_MODE_FLAG_3D_L_DEPTH_GFX_GFX_DEPTH: ? + * - DRM_MODE_FLAG_3D_TOP_AND_BOTTOM: frame split into top and bottom + * parts. + * - DRM_MODE_FLAG_3D_SIDE_BY_SIDE_HALF: frame split into left and + * right parts. + */ unsigned int flags; - /* Addressable image size (may be 0 for projectors, etc.) */ + /** + * @width_mm: + * + * Addressable size of the output in mm, projectors should set this to + * 0. + */ int width_mm; + + /** + * @height_mm: + * + * Addressable size of the output in mm, projectors should set this to + * 0. + */ int height_mm; - /* Actual mode we give to hw */ - int crtc_clock; /* in KHz */ + /** + * @crtc_clock: + * + * Actual pixel or dot clock in the hardware. This differs from the + * logical @clock when e.g. using interlacing, double-clocking, stereo + * modes or other fancy stuff that changes the timings and signals + * actually sent over the wire. + * + * This is again in kHz. + * + * Note that with digital outputs like HDMI or DP there's usually a + * massive confusion between the dot clock and the signal clock at the + * bit encoding level. Especially when a 8b/10b encoding is used and the + * difference is exactly a factor of 10. + */ + int crtc_clock; int crtc_hdisplay; int crtc_hblank_start; int crtc_hblank_end; @@ -140,12 +353,48 @@ struct drm_display_mode { int crtc_vsync_end; int crtc_vtotal; - /* Driver private mode info */ + /** + * @private: + * + * Pointer for driver private data. This can only be used for mode + * objects passed to drivers in modeset operations. It shouldn't be used + * by atomic drivers since they can store any additional data by + * subclassing state structures. + */ int *private; + + /** + * @private_flags: + * + * Similar to @private, but just an integer. + */ int private_flags; - int vrefresh; /* in Hz */ - int hsync; /* in kHz */ + /** + * @vrefresh: + * + * Vertical refresh rate, for debug output in human readable form. Not + * used in a functional way. + * + * This value is in Hz. + */ + int vrefresh; + + /** + * @hsync: + * + * Horizontal refresh rate, for debug output in human readable form. Not + * used in a functional way. + * + * This value is in kHz. + */ + int hsync; + + /** + * @picture_aspect_ratio: + * + * Field for setting the HDMI picture aspect ratio of a mode. + */ enum hdmi_picture_aspect picture_aspect_ratio; }; -- 2.20.1