From 30e2fccf9512380b5cdceffe04d776f5e6de6b49 Mon Sep 17 00:00:00 2001 From: Yong Wu Date: Mon, 21 Aug 2017 19:00:20 +0800 Subject: [PATCH] iommu/mediatek: Enlarge the validate PA range for 4GB mode This patch is for 4GB mode, mainly for 4 issues: 1) Fix a 4GB bug: if the dram base is 0x4000_0000, the dram size is 0xc000_0000. then the code just meet a corner case because max_pfn is 0x10_0000. data->enable_4GB = !!(max_pfn > (0xffffffffUL >> PAGE_SHIFT)); It's true at the case above. That is unexpected. 2) In mt2712, there is a new register for the 4GB PA range(0x118) we should enlarge the max PA range, or the HW will report error. The dram range is from 0x1_0000_0000 to 0x1_ffff_ffff in the 4GB mode, we cut out the bit[32:30] of the SA(Start address) and EA(End address) into this REG_MMU_VLD_PA_RNG(0x118). 3) In mt2712, the register(0x13c) is extended for 4GB mode. bit[7:6] indicate the valid PA[32:33]. Thus, we don't mask the value and print it directly for debug. 4) if 4GB is enabled, the dram PA range is from 0x1_0000_0000 to 0x1_ffff_ffff. Thus, the PA from iova_to_pa should also '|' BIT(32) Signed-off-by: Honghui Zhang Signed-off-by: Yong Wu Signed-off-by: Joerg Roedel --- drivers/iommu/mtk_iommu.c | 18 +++++++++++++++--- 1 file changed, 15 insertions(+), 3 deletions(-) diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c index e21de8634cba..4f233e13c28a 100644 --- a/drivers/iommu/mtk_iommu.c +++ b/drivers/iommu/mtk_iommu.c @@ -61,6 +61,8 @@ #define REG_MMU_IVRP_PADDR 0x114 #define F_MMU_IVRP_PA_SET(pa, ext) (((pa) >> 1) | ((!!(ext)) << 31)) +#define REG_MMU_VLD_PA_RNG 0x118 +#define F_MMU_VLD_PA_RNG(EA, SA) (((EA) << 8) | (SA)) #define REG_MMU_INT_CONTROL0 0x120 #define F_L2_MULIT_HIT_EN BIT(0) @@ -85,7 +87,6 @@ #define REG_MMU_FAULT_ST1 0x134 #define REG_MMU_FAULT_VA 0x13c -#define F_MMU_FAULT_VA_MSK 0xfffff000 #define F_MMU_FAULT_VA_WRITE_BIT BIT(1) #define F_MMU_FAULT_VA_LAYER_BIT BIT(0) @@ -214,7 +215,6 @@ static irqreturn_t mtk_iommu_isr(int irq, void *dev_id) fault_iova = readl_relaxed(data->base + REG_MMU_FAULT_VA); layer = fault_iova & F_MMU_FAULT_VA_LAYER_BIT; write = fault_iova & F_MMU_FAULT_VA_WRITE_BIT; - fault_iova &= F_MMU_FAULT_VA_MSK; fault_pa = readl_relaxed(data->base + REG_MMU_INVLD_PA); regval = readl_relaxed(data->base + REG_MMU_INT_ID); fault_larb = F_MMU0_INT_ID_LARB_ID(regval); @@ -395,6 +395,7 @@ static phys_addr_t mtk_iommu_iova_to_phys(struct iommu_domain *domain, dma_addr_t iova) { struct mtk_iommu_domain *dom = to_mtk_domain(domain); + struct mtk_iommu_data *data = mtk_iommu_get_m4u_data(); unsigned long flags; phys_addr_t pa; @@ -402,6 +403,9 @@ static phys_addr_t mtk_iommu_iova_to_phys(struct iommu_domain *domain, pa = dom->iop->iova_to_phys(dom->iop, iova); spin_unlock_irqrestore(&dom->pgtlock, flags); + if (data->enable_4GB) + pa |= BIT(32); + return pa; } @@ -529,6 +533,14 @@ static int mtk_iommu_hw_init(const struct mtk_iommu_data *data) writel_relaxed(F_MMU_IVRP_PA_SET(data->protect_base, data->enable_4GB), data->base + REG_MMU_IVRP_PADDR); + if (data->enable_4GB && data->m4u_type != M4U_MT8173) { + /* + * If 4GB mode is enabled, the validate PA range is from + * 0x1_0000_0000 to 0x1_ffff_ffff. here record bit[32:30]. + */ + regval = F_MMU_VLD_PA_RNG(7, 4); + writel_relaxed(regval, data->base + REG_MMU_VLD_PA_RNG); + } writel_relaxed(0, data->base + REG_MMU_DCM_DIS); /* It's MISC control register whose default value is ok except mt8173.*/ @@ -574,7 +586,7 @@ static int mtk_iommu_probe(struct platform_device *pdev) data->protect_base = ALIGN(virt_to_phys(protect), MTK_PROTECT_PA_ALIGN); /* Whether the current dram is over 4GB */ - data->enable_4GB = !!(max_pfn > (0xffffffffUL >> PAGE_SHIFT)); + data->enable_4GB = !!(max_pfn > (BIT(32) >> PAGE_SHIFT)); res = platform_get_resource(pdev, IORESOURCE_MEM, 0); data->base = devm_ioremap_resource(dev, res); -- 2.20.1