From 30bd3a3092c17dbfa18f042ca0815758e8d34e65 Mon Sep 17 00:00:00 2001 From: Bruno Randolf Date: Wed, 19 May 2010 10:31:21 +0900 Subject: [PATCH] ath5k: clarify logic when to enable spur mitigation filter The old code logically did not make sense and seems to have been confused by the fact that we could have newer EEPROMs on older hardware. In any case the spur mitigation filter was set if the srev was >= AR5K_SREV_AR5424. Spur info is available only from EEPROM versions bigger than 5.3 but but the EEPOM routines will use static values for older versions, so that should be o.k. Signed-off-by: Bruno Randolf Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath5k/reset.c | 15 +++++---------- 1 file changed, 5 insertions(+), 10 deletions(-) diff --git a/drivers/net/wireless/ath/ath5k/reset.c b/drivers/net/wireless/ath/ath5k/reset.c index 4f4504c2939c..a1bc01528ab5 100644 --- a/drivers/net/wireless/ath/ath5k/reset.c +++ b/drivers/net/wireless/ath/ath5k/reset.c @@ -1087,22 +1087,17 @@ int ath5k_hw_reset(struct ath5k_hw *ah, enum nl80211_iftype op_mode, /* Write OFDM timings on 5212*/ if (ah->ah_version == AR5K_AR5212 && channel->hw_value & CHANNEL_OFDM) { - struct ath5k_eeprom_info *ee = - &ah->ah_capabilities.cap_eeprom; ret = ath5k_hw_write_ofdm_timings(ah, channel); if (ret) return ret; - /* Note: According to docs we can have a newer - * EEPROM on old hardware, so we need to verify - * that our hardware is new enough to have spur - * mitigation registers (delta phase etc) */ - if (ah->ah_mac_srev >= AR5K_SREV_AR5424 || - (ah->ah_mac_srev >= AR5K_SREV_AR5424 && - ee->ee_version >= AR5K_EEPROM_VERSION_5_3)) + /* Spur info is available only from EEPROM versions + * bigger than 5.3 but but the EEPOM routines will use + * static values for older versions */ + if (ah->ah_mac_srev >= AR5K_SREV_AR5424) ath5k_hw_set_spur_mitigation_filter(ah, - channel); + channel); } /*Enable/disable 802.11b mode on 5111 -- 2.20.1