From 2ffc1ccad85e8c2e81a6a4beb390fb4ce143256b Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Fri, 4 Aug 2006 22:53:37 -0400 Subject: [PATCH] Input: ati_remote - use msec instead of jiffies By using milliseconds instead of jiffies to calculate acceleration factor we make the code immune to changes in HZ. Signed-off-by: Dmitry Torokhov --- drivers/usb/input/ati_remote.c | 135 +++++++++++++++++++-------------- 1 file changed, 77 insertions(+), 58 deletions(-) diff --git a/drivers/usb/input/ati_remote.c b/drivers/usb/input/ati_remote.c index 5a56f6cb36a..3719fcb04b8 100644 --- a/drivers/usb/input/ati_remote.c +++ b/drivers/usb/input/ati_remote.c @@ -157,9 +157,6 @@ MODULE_DEVICE_TABLE(usb, ati_remote_table); static char init1[] = { 0x01, 0x00, 0x20, 0x14 }; static char init2[] = { 0x01, 0x00, 0x20, 0x14, 0x20, 0x20, 0x20 }; -/* Acceleration curve for directional control pad */ -static const char accel[] = { 1, 2, 4, 6, 9, 13, 20 }; - struct ati_remote { struct input_dev *idev; struct usb_device *udev; @@ -416,6 +413,43 @@ static int ati_remote_event_lookup(int rem, unsigned char d1, unsigned char d2) return -1; } +/* + * ati_remote_compute_accel + * + * Implements acceleration curve for directional control pad + * If elapsed time since last event is > 1/4 second, user "stopped", + * so reset acceleration. Otherwise, user is probably holding the control + * pad down, so we increase acceleration, ramping up over two seconds to + * a maximum speed. + */ +static int ati_remote_compute_accel(struct ati_remote *ati_remote) +{ + static const char accel[] = { 1, 2, 4, 6, 9, 13, 20 }; + unsigned long now = jiffies; + int acc; + + if (time_after(now, ati_remote->old_jiffies + msecs_to_jiffies(250))) { + acc = 1; + ati_remote->acc_jiffies = now; + } + else if (time_before(now, ati_remote->acc_jiffies + msecs_to_jiffies(125))) + acc = accel[0]; + else if (time_before(now, ati_remote->acc_jiffies + msecs_to_jiffies(250))) + acc = accel[1]; + else if (time_before(now, ati_remote->acc_jiffies + msecs_to_jiffies(500))) + acc = accel[2]; + else if (time_before(now, ati_remote->acc_jiffies + msecs_to_jiffies(1000))) + acc = accel[3]; + else if (time_before(now, ati_remote->acc_jiffies + msecs_to_jiffies(1500))) + acc = accel[4]; + else if (time_before(now, ati_remote->acc_jiffies + msecs_to_jiffies(2000))) + acc = accel[5]; + else + acc = accel[6]; + + return acc; +} + /* * ati_remote_report_input */ @@ -494,63 +528,48 @@ static void ati_remote_input_report(struct urb *urb, struct pt_regs *regs) ati_remote_tbl[index].code, 0); input_sync(dev); - return; - } + } else { - /* - * Other event kinds are from the directional control pad, and have an - * acceleration factor applied to them. Without this acceleration, the - * control pad is mostly unusable. - * - * If elapsed time since last event is > 1/4 second, user "stopped", - * so reset acceleration. Otherwise, user is probably holding the control - * pad down, so we increase acceleration, ramping up over two seconds to - * a maximum speed. The acceleration curve is #defined above. - */ - if (time_after(jiffies, ati_remote->old_jiffies + (HZ >> 2))) { - acc = 1; - ati_remote->acc_jiffies = jiffies; - } - else if (time_before(jiffies, ati_remote->acc_jiffies + (HZ >> 3))) acc = accel[0]; - else if (time_before(jiffies, ati_remote->acc_jiffies + (HZ >> 2))) acc = accel[1]; - else if (time_before(jiffies, ati_remote->acc_jiffies + (HZ >> 1))) acc = accel[2]; - else if (time_before(jiffies, ati_remote->acc_jiffies + HZ)) acc = accel[3]; - else if (time_before(jiffies, ati_remote->acc_jiffies + HZ+(HZ>>1))) acc = accel[4]; - else if (time_before(jiffies, ati_remote->acc_jiffies + (HZ << 1))) acc = accel[5]; - else acc = accel[6]; - - input_regs(dev, regs); - switch (ati_remote_tbl[index].kind) { - case KIND_ACCEL: - input_event(dev, ati_remote_tbl[index].type, - ati_remote_tbl[index].code, - ati_remote_tbl[index].value * acc); - break; - case KIND_LU: - input_report_rel(dev, REL_X, -acc); - input_report_rel(dev, REL_Y, -acc); - break; - case KIND_RU: - input_report_rel(dev, REL_X, acc); - input_report_rel(dev, REL_Y, -acc); - break; - case KIND_LD: - input_report_rel(dev, REL_X, -acc); - input_report_rel(dev, REL_Y, acc); - break; - case KIND_RD: - input_report_rel(dev, REL_X, acc); - input_report_rel(dev, REL_Y, acc); - break; - default: - dev_dbg(&ati_remote->interface->dev, "ati_remote kind=%d\n", - ati_remote_tbl[index].kind); - } - input_sync(dev); + /* + * Other event kinds are from the directional control pad, and have an + * acceleration factor applied to them. Without this acceleration, the + * control pad is mostly unusable. + */ + acc = ati_remote_compute_accel(ati_remote); - ati_remote->old_jiffies = jiffies; - ati_remote->old_data[0] = data[1]; - ati_remote->old_data[1] = data[2]; + input_regs(dev, regs); + switch (ati_remote_tbl[index].kind) { + case KIND_ACCEL: + input_event(dev, ati_remote_tbl[index].type, + ati_remote_tbl[index].code, + ati_remote_tbl[index].value * acc); + break; + case KIND_LU: + input_report_rel(dev, REL_X, -acc); + input_report_rel(dev, REL_Y, -acc); + break; + case KIND_RU: + input_report_rel(dev, REL_X, acc); + input_report_rel(dev, REL_Y, -acc); + break; + case KIND_LD: + input_report_rel(dev, REL_X, -acc); + input_report_rel(dev, REL_Y, acc); + break; + case KIND_RD: + input_report_rel(dev, REL_X, acc); + input_report_rel(dev, REL_Y, acc); + break; + default: + dev_dbg(&ati_remote->interface->dev, "ati_remote kind=%d\n", + ati_remote_tbl[index].kind); + } + input_sync(dev); + + ati_remote->old_jiffies = jiffies; + ati_remote->old_data[0] = data[1]; + ati_remote->old_data[1] = data[2]; + } } /* -- 2.20.1