From 2ff404005e9f94ee3d05b6b0dac8204c1fcc2346 Mon Sep 17 00:00:00 2001 From: Andrew Bresticker Date: Wed, 12 Nov 2014 11:43:37 -0800 Subject: [PATCH] of: Add binding document for MIPS GIC The Global Interrupt Controller (GIC) present on certain MIPS systems can be used to route external interrupts to individual VPEs and CPU interrupt vectors. It also supports a timer and software-generated interrupts. Signed-off-by: Andrew Bresticker Acked-by: Arnd Bergmann Cc: Rob Herring Cc: Pawel Moll Cc: Mark Rutland Cc: Ian Campbell Cc: Kumar Gala Cc: Thomas Gleixner Cc: Jason Cooper Cc: Daniel Lezcano Cc: John Crispin Cc: David Daney Cc: Qais Yousef Cc: James Hogan Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/8420/ Signed-off-by: Ralf Baechle --- .../interrupt-controller/mips-gic.txt | 55 +++++++++++++++++++ .../interrupt-controller/mips-gic.h | 9 +++ 2 files changed, 64 insertions(+) create mode 100644 Documentation/devicetree/bindings/interrupt-controller/mips-gic.txt create mode 100644 include/dt-bindings/interrupt-controller/mips-gic.h diff --git a/Documentation/devicetree/bindings/interrupt-controller/mips-gic.txt b/Documentation/devicetree/bindings/interrupt-controller/mips-gic.txt new file mode 100644 index 000000000000..5a65478e5d40 --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/mips-gic.txt @@ -0,0 +1,55 @@ +MIPS Global Interrupt Controller (GIC) + +The MIPS GIC routes external interrupts to individual VPEs and IRQ pins. +It also supports local (per-processor) interrupts and software-generated +interrupts which can be used as IPIs. The GIC also includes a free-running +global timer, per-CPU count/compare timers, and a watchdog. + +Required properties: +- compatible : Should be "mti,gic". +- interrupt-controller : Identifies the node as an interrupt controller +- #interrupt-cells : Specifies the number of cells needed to encode an + interrupt specifier. Should be 3. + - The first cell is the type of interrupt, local or shared. + See . + - The second cell is the GIC interrupt number. + - The third cell encodes the interrupt flags. + See for a list of valid + flags. + +Optional properties: +- reg : Base address and length of the GIC registers. If not present, + the base address reported by the hardware GCR_GIC_BASE will be used. +- mti,reserved-cpu-vectors : Specifies the list of CPU interrupt vectors + to which the GIC may not route interrupts. Valid values are 2 - 7. + This property is ignored if the CPU is started in EIC mode. + +Required properties for timer sub-node: +- compatible : Should be "mti,gic-timer". +- interrupts : Interrupt for the GIC local timer. +- clock-frequency : Clock frequency at which the GIC timers operate. + +Example: + + gic: interrupt-controller@1bdc0000 { + compatible = "mti,gic"; + reg = <0x1bdc0000 0x20000>; + + interrupt-controller; + #interrupt-cells = <3>; + + mti,reserved-cpu-vectors = <7>; + + timer { + compatible = "mti,gic-timer"; + interrupts = ; + clock-frequency = <50000000>; + }; + }; + + uart@18101400 { + ... + interrupt-parent = <&gic>; + interrupts = ; + ... + }; diff --git a/include/dt-bindings/interrupt-controller/mips-gic.h b/include/dt-bindings/interrupt-controller/mips-gic.h new file mode 100644 index 000000000000..cf35a577e371 --- /dev/null +++ b/include/dt-bindings/interrupt-controller/mips-gic.h @@ -0,0 +1,9 @@ +#ifndef _DT_BINDINGS_INTERRUPT_CONTROLLER_MIPS_GIC_H +#define _DT_BINDINGS_INTERRUPT_CONTROLLER_MIPS_GIC_H + +#include + +#define GIC_SHARED 0 +#define GIC_LOCAL 1 + +#endif -- 2.20.1