From 2fbe4526e5aafc9ffa5d85fa4749a7c5b22af6b2 Mon Sep 17 00:00:00 2001 From: Bruce Allan Date: Thu, 19 Apr 2012 03:21:47 +0000 Subject: [PATCH] e1000e: initial support for i217 i217 is the next-generation LOM that will be available on systems with the Lynx Point Platform Controller Hub (PCH) chipset from Intel. This patch provides the initial support for the device. Signed-off-by: Bruce Allan Tested-by: Jeff Pieper Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/e1000e/defines.h | 8 + drivers/net/ethernet/intel/e1000e/e1000.h | 2 + drivers/net/ethernet/intel/e1000e/ethtool.c | 17 +- drivers/net/ethernet/intel/e1000e/hw.h | 9 + drivers/net/ethernet/intel/e1000e/ich8lan.c | 370 ++++++++++++++++++-- drivers/net/ethernet/intel/e1000e/netdev.c | 17 +- drivers/net/ethernet/intel/e1000e/phy.c | 3 + 7 files changed, 398 insertions(+), 28 deletions(-) diff --git a/drivers/net/ethernet/intel/e1000e/defines.h b/drivers/net/ethernet/intel/e1000e/defines.h index 3a5025917163..11c46661af09 100644 --- a/drivers/net/ethernet/intel/e1000e/defines.h +++ b/drivers/net/ethernet/intel/e1000e/defines.h @@ -74,7 +74,9 @@ #define E1000_WUS_BC E1000_WUFC_BC /* Extended Device Control */ +#define E1000_CTRL_EXT_LPCD 0x00000004 /* LCD Power Cycle Done */ #define E1000_CTRL_EXT_SDP3_DATA 0x00000080 /* Value of SW Definable Pin 3 */ +#define E1000_CTRL_EXT_FORCE_SMBUS 0x00000004 /* Force SMBus mode*/ #define E1000_CTRL_EXT_EE_RST 0x00002000 /* Reinitialize from EEPROM */ #define E1000_CTRL_EXT_SPD_BYPS 0x00008000 /* Speed Select Bypass */ #define E1000_CTRL_EXT_RO_DIS 0x00020000 /* Relaxed Ordering disable */ @@ -573,6 +575,7 @@ #define NWAY_AR_ASM_DIR 0x0800 /* Asymmetric Pause Direction bit */ /* Link Partner Ability Register (Base Page) */ +#define NWAY_LPAR_100TX_FD_CAPS 0x0100 /* LP 100TX Full Dplx Capable */ #define NWAY_LPAR_PAUSE 0x0400 /* LP Pause operation desired */ #define NWAY_LPAR_ASM_DIR 0x0800 /* LP Asymmetric Pause Direction bit */ @@ -739,6 +742,7 @@ #define I82577_E_PHY_ID 0x01540050 #define I82578_E_PHY_ID 0x004DD040 #define I82579_E_PHY_ID 0x01540090 +#define I217_E_PHY_ID 0x015400A0 /* M88E1000 Specific Registers */ #define M88E1000_PHY_SPEC_CTRL 0x10 /* PHY Specific Control Register */ @@ -850,4 +854,8 @@ /* SerDes Control */ #define E1000_GEN_POLL_TIMEOUT 640 +/* FW Semaphore */ +#define E1000_FWSM_WLOCK_MAC_MASK 0x0380 +#define E1000_FWSM_WLOCK_MAC_SHIFT 7 + #endif /* _E1000_DEFINES_H_ */ diff --git a/drivers/net/ethernet/intel/e1000e/e1000.h b/drivers/net/ethernet/intel/e1000e/e1000.h index c960cf88cb0f..6e6fffb34581 100644 --- a/drivers/net/ethernet/intel/e1000e/e1000.h +++ b/drivers/net/ethernet/intel/e1000e/e1000.h @@ -206,6 +206,7 @@ enum e1000_boards { board_ich10lan, board_pchlan, board_pch2lan, + board_pch_lpt, }; struct e1000_ps_page { @@ -528,6 +529,7 @@ extern const struct e1000_info e1000_ich9_info; extern const struct e1000_info e1000_ich10_info; extern const struct e1000_info e1000_pch_info; extern const struct e1000_info e1000_pch2_info; +extern const struct e1000_info e1000_pch_lpt_info; extern const struct e1000_info e1000_es2_info; extern s32 e1000_read_pba_string_generic(struct e1000_hw *hw, u8 *pba_num, diff --git a/drivers/net/ethernet/intel/e1000e/ethtool.c b/drivers/net/ethernet/intel/e1000e/ethtool.c index 4f1edd9c22f1..d863075df7a4 100644 --- a/drivers/net/ethernet/intel/e1000e/ethtool.c +++ b/drivers/net/ethernet/intel/e1000e/ethtool.c @@ -773,6 +773,7 @@ static int e1000_reg_test(struct e1000_adapter *adapter, u64 *data) u32 i; u32 toggle; u32 mask; + u32 wlock_mac = 0; /* * The status register is Read Only, so a write should fail. @@ -838,19 +839,31 @@ static int e1000_reg_test(struct e1000_adapter *adapter, u64 *data) case e1000_ich10lan: case e1000_pchlan: case e1000_pch2lan: + case e1000_pch_lpt: mask |= (1 << 18); break; default: break; } - for (i = 0; i < mac->rar_entry_count; i++) + + if (mac->type == e1000_pch_lpt) + wlock_mac = (er32(FWSM) & E1000_FWSM_WLOCK_MAC_MASK) >> + E1000_FWSM_WLOCK_MAC_SHIFT; + + for (i = 0; i < mac->rar_entry_count; i++) { + /* Cannot test write-protected SHRAL[n] registers */ + if ((wlock_mac == 1) || (wlock_mac && (i > wlock_mac))) + continue; + REG_PATTERN_TEST_ARRAY(E1000_RA, ((i << 1) + 1), - mask, 0xFFFFFFFF); + mask, 0xFFFFFFFF); + } for (i = 0; i < mac->mta_reg_count; i++) REG_PATTERN_TEST_ARRAY(E1000_MTA, i, 0xFFFFFFFF, 0xFFFFFFFF); *data = 0; + return 0; } diff --git a/drivers/net/ethernet/intel/e1000e/hw.h b/drivers/net/ethernet/intel/e1000e/hw.h index 00a0ebb41b8d..ed5b40985edb 100644 --- a/drivers/net/ethernet/intel/e1000e/hw.h +++ b/drivers/net/ethernet/intel/e1000e/hw.h @@ -200,6 +200,10 @@ enum e1e_registers { #define E1000_RA (E1000_RAL(0)) E1000_RAH_BASE = 0x05404, /* Receive Address High - RW */ #define E1000_RAH(_n) (E1000_RAH_BASE + ((_n) * 8)) + E1000_SHRAL_PCH_LPT_BASE = 0x05408, +#define E1000_SHRAL_PCH_LPT(_n) (E1000_SHRAL_PCH_LPT_BASE + ((_n) * 8)) + E1000_SHRAH_PCH_LTP_BASE = 0x0540C, +#define E1000_SHRAH_PCH_LPT(_n) (E1000_SHRAH_PCH_LTP_BASE + ((_n) * 8)) E1000_SHRAL_BASE = 0x05438, /* Shared Receive Address Low - RW */ #define E1000_SHRAL(_n) (E1000_SHRAL_BASE + ((_n) * 8)) E1000_SHRAH_BASE = 0x0543C, /* Shared Receive Address High - RW */ @@ -406,6 +410,8 @@ enum e1e_registers { #define E1000_DEV_ID_PCH_D_HV_DC 0x10F0 #define E1000_DEV_ID_PCH2_LV_LM 0x1502 #define E1000_DEV_ID_PCH2_LV_V 0x1503 +#define E1000_DEV_ID_PCH_LPT_I217_LM 0x153A +#define E1000_DEV_ID_PCH_LPT_I217_V 0x153B #define E1000_REVISION_4 4 @@ -426,6 +432,7 @@ enum e1000_mac_type { e1000_ich10lan, e1000_pchlan, e1000_pch2lan, + e1000_pch_lpt, }; enum e1000_media_type { @@ -463,6 +470,7 @@ enum e1000_phy_type { e1000_phy_82578, e1000_phy_82577, e1000_phy_82579, + e1000_phy_i217, }; enum e1000_bus_width { @@ -971,6 +979,7 @@ struct e1000_dev_spec_ich8lan { struct e1000_shadow_ram shadow_ram[E1000_ICH8_SHADOW_RAM_WORDS]; bool nvm_k1_enabled; bool eee_disable; + u16 eee_lp_ability; }; struct e1000_hw { diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.c b/drivers/net/ethernet/intel/e1000e/ich8lan.c index dfff4416cf4b..bbf70ba367da 100644 --- a/drivers/net/ethernet/intel/e1000e/ich8lan.c +++ b/drivers/net/ethernet/intel/e1000e/ich8lan.c @@ -116,6 +116,7 @@ #define E1000_ICH_RAR_ENTRIES 7 #define E1000_PCH2_RAR_ENTRIES 5 /* RAR[0], SHRA[0-3] */ +#define E1000_PCH_LPT_RAR_ENTRIES 12 /* RAR[0], SHRA[0-10] */ #define PHY_PAGE_SHIFT 5 #define PHY_REG(page, reg) (((page) << PHY_PAGE_SHIFT) | \ @@ -131,11 +132,18 @@ #define SW_FLAG_TIMEOUT 1000 /* SW Semaphore flag timeout in milliseconds */ +/* SMBus Control Phy Register */ +#define CV_SMB_CTRL PHY_REG(769, 23) +#define CV_SMB_CTRL_FORCE_SMBUS 0x0001 + /* SMBus Address Phy Register */ #define HV_SMB_ADDR PHY_REG(768, 26) #define HV_SMB_ADDR_MASK 0x007F #define HV_SMB_ADDR_PEC_EN 0x0200 #define HV_SMB_ADDR_VALID 0x0080 +#define HV_SMB_ADDR_FREQ_MASK 0x1100 +#define HV_SMB_ADDR_FREQ_LOW_SHIFT 8 +#define HV_SMB_ADDR_FREQ_HIGH_SHIFT 12 /* PHY Power Management Control */ #define HV_PM_CTRL PHY_REG(770, 17) @@ -152,11 +160,26 @@ #define I82579_LPI_UPDATE_TIMER 0x4805 /* in 40ns units + 40 ns base value */ #define I82579_MSE_THRESHOLD 0x084F /* Mean Square Error Threshold */ #define I82579_MSE_LINK_DOWN 0x2411 /* MSE count before dropping link */ +#define I217_EEE_ADVERTISEMENT 0x8001 /* IEEE MMD Register 7.60 */ +#define I217_EEE_LP_ABILITY 0x8002 /* IEEE MMD Register 7.61 */ +#define I217_EEE_100_SUPPORTED (1 << 1) /* 100BaseTx EEE supported */ + +/* Intel Rapid Start Technology Support */ +#define I217_PROXY_CTRL PHY_REG(BM_WUC_PAGE, 70) +#define I217_PROXY_CTRL_AUTO_DISABLE 0x0080 +#define I217_SxCTRL PHY_REG(BM_PORT_CTRL_PAGE, 28) +#define I217_SxCTRL_MASK 0x1000 +#define I217_CGFREG PHY_REG(772, 29) +#define I217_CGFREG_MASK 0x0002 +#define I217_MEMPWR PHY_REG(772, 26) +#define I217_MEMPWR_MASK 0x0010 /* Strapping Option Register - RO */ #define E1000_STRAP 0x0000C #define E1000_STRAP_SMBUS_ADDRESS_MASK 0x00FE0000 #define E1000_STRAP_SMBUS_ADDRESS_SHIFT 17 +#define E1000_STRAP_SMT_FREQ_MASK 0x00003000 +#define E1000_STRAP_SMT_FREQ_SHIFT 12 /* OEM Bits Phy Register */ #define HV_OEM_BITS PHY_REG(768, 25) @@ -261,6 +284,7 @@ static s32 e1000_set_mdio_slow_mode_hv(struct e1000_hw *hw); static bool e1000_check_mng_mode_ich8lan(struct e1000_hw *hw); static bool e1000_check_mng_mode_pchlan(struct e1000_hw *hw); static void e1000_rar_set_pch2lan(struct e1000_hw *hw, u8 *addr, u32 index); +static void e1000_rar_set_pch_lpt(struct e1000_hw *hw, u8 *addr, u32 index); static s32 e1000_k1_workaround_lv(struct e1000_hw *hw); static void e1000_gate_hw_phy_config_ich8lan(struct e1000_hw *hw, bool gate); @@ -332,6 +356,7 @@ static s32 e1000_init_phy_workarounds_pchlan(struct e1000_hw *hw) { u32 mac_reg, fwsm = er32(FWSM); s32 ret_val; + u16 phy_reg; ret_val = hw->phy.ops.acquire(hw); if (ret_val) { @@ -345,16 +370,42 @@ static s32 e1000_init_phy_workarounds_pchlan(struct e1000_hw *hw) * LANPHYPC Value bit to force the interconnect to PCIe mode. */ switch (hw->mac.type) { + case e1000_pch_lpt: + if (e1000_phy_is_accessible_pchlan(hw)) + break; + + /* + * Before toggling LANPHYPC, see if PHY is accessible by + * forcing MAC to SMBus mode first. + */ + mac_reg = er32(CTRL_EXT); + mac_reg |= E1000_CTRL_EXT_FORCE_SMBUS; + ew32(CTRL_EXT, mac_reg); + + /* fall-through */ case e1000_pch2lan: /* * Gate automatic PHY configuration by hardware on * non-managed 82579 */ - if (!(fwsm & E1000_ICH_FWSM_FW_VALID)) + if ((hw->mac.type == e1000_pch2lan) && + !(fwsm & E1000_ICH_FWSM_FW_VALID)) e1000_gate_hw_phy_config_ich8lan(hw, true); - if (e1000_phy_is_accessible_pchlan(hw)) + if (e1000_phy_is_accessible_pchlan(hw)) { + if (hw->mac.type == e1000_pch_lpt) { + /* Unforce SMBus mode in PHY */ + e1e_rphy_locked(hw, CV_SMB_CTRL, &phy_reg); + phy_reg &= ~CV_SMB_CTRL_FORCE_SMBUS; + e1e_wphy_locked(hw, CV_SMB_CTRL, phy_reg); + + /* Unforce SMBus mode in MAC */ + mac_reg = er32(CTRL_EXT); + mac_reg &= ~E1000_CTRL_EXT_FORCE_SMBUS; + ew32(CTRL_EXT, mac_reg); + } break; + } /* fall-through */ case e1000_pchlan: @@ -385,7 +436,15 @@ static s32 e1000_init_phy_workarounds_pchlan(struct e1000_hw *hw) mac_reg &= ~E1000_CTRL_LANPHYPC_OVERRIDE; ew32(CTRL, mac_reg); e1e_flush(); - msleep(50); + if (hw->mac.type < e1000_pch_lpt) { + msleep(50); + } else { + u16 count = 20; + do { + usleep_range(5000, 10000); + } while (!(er32(CTRL_EXT) & + E1000_CTRL_EXT_LPCD) && count--); + } break; default: break; @@ -454,6 +513,7 @@ static s32 e1000_init_phy_params_pchlan(struct e1000_hw *hw) break; /* fall-through */ case e1000_pch2lan: + case e1000_pch_lpt: /* * In case the PHY needs to be in mdio slow mode, * set slow mode and try to get the PHY id again. @@ -471,6 +531,7 @@ static s32 e1000_init_phy_params_pchlan(struct e1000_hw *hw) switch (phy->type) { case e1000_phy_82577: case e1000_phy_82579: + case e1000_phy_i217: phy->ops.check_polarity = e1000_check_polarity_82577; phy->ops.force_speed_duplex = e1000_phy_force_speed_duplex_82577; @@ -655,7 +716,7 @@ static s32 e1000_init_mac_params_ich8lan(struct e1000_hw *hw) /* Adaptive IFS supported */ mac->adaptive_ifs = true; - /* LED operations */ + /* LED and other operations */ switch (mac->type) { case e1000_ich8lan: case e1000_ich9lan: @@ -678,6 +739,7 @@ static s32 e1000_init_mac_params_ich8lan(struct e1000_hw *hw) mac->rar_entry_count = E1000_PCH2_RAR_ENTRIES; mac->ops.rar_set = e1000_rar_set_pch2lan; /* fall-through */ + case e1000_pch_lpt: case e1000_pchlan: /* check management mode */ mac->ops.check_mng_mode = e1000_check_mng_mode_pchlan; @@ -695,12 +757,20 @@ static s32 e1000_init_mac_params_ich8lan(struct e1000_hw *hw) break; } + if (mac->type == e1000_pch_lpt) { + mac->rar_entry_count = E1000_PCH_LPT_RAR_ENTRIES; + mac->ops.rar_set = e1000_rar_set_pch_lpt; + } + /* Enable PCS Lock-loss workaround for ICH8 */ if (mac->type == e1000_ich8lan) e1000e_set_kmrn_lock_loss_workaround_ich8lan(hw, true); - /* Gate automatic PHY configuration by hardware on managed 82579 */ - if ((mac->type == e1000_pch2lan) && + /* + * Gate automatic PHY configuration by hardware on managed + * 82579 and i217 + */ + if ((mac->type == e1000_pch2lan || mac->type == e1000_pch_lpt) && (er32(FWSM) & E1000_ICH_FWSM_FW_VALID)) e1000_gate_hw_phy_config_ich8lan(hw, true); @@ -716,22 +786,50 @@ static s32 e1000_init_mac_params_ich8lan(struct e1000_hw *hw) **/ static s32 e1000_set_eee_pchlan(struct e1000_hw *hw) { + struct e1000_dev_spec_ich8lan *dev_spec = &hw->dev_spec.ich8lan; s32 ret_val = 0; u16 phy_reg; - if (hw->phy.type != e1000_phy_82579) + if ((hw->phy.type != e1000_phy_82579) && + (hw->phy.type != e1000_phy_i217)) return 0; ret_val = e1e_rphy(hw, I82579_LPI_CTRL, &phy_reg); if (ret_val) return ret_val; - if (hw->dev_spec.ich8lan.eee_disable) + if (dev_spec->eee_disable) phy_reg &= ~I82579_LPI_CTRL_ENABLE_MASK; else phy_reg |= I82579_LPI_CTRL_ENABLE_MASK; - return e1e_wphy(hw, I82579_LPI_CTRL, phy_reg); + ret_val = e1e_wphy(hw, I82579_LPI_CTRL, phy_reg); + if (ret_val) + return ret_val; + + if ((hw->phy.type == e1000_phy_i217) && !dev_spec->eee_disable) { + /* Save off link partner's EEE ability */ + ret_val = hw->phy.ops.acquire(hw); + if (ret_val) + return ret_val; + ret_val = e1e_wphy_locked(hw, I82579_EMI_ADDR, + I217_EEE_LP_ABILITY); + if (ret_val) + goto release; + e1e_rphy_locked(hw, I82579_EMI_DATA, &dev_spec->eee_lp_ability); + + /* + * EEE is not supported in 100Half, so ignore partner's EEE + * in 100 ability if full-duplex is not advertised. + */ + e1e_rphy_locked(hw, PHY_LP_ABILITY, &phy_reg); + if (!(phy_reg & NWAY_LPAR_100TX_FD_CAPS)) + dev_spec->eee_lp_ability &= ~I217_EEE_100_SUPPORTED; +release: + hw->phy.ops.release(hw); + } + + return 0; } /** @@ -773,6 +871,9 @@ static s32 e1000_check_for_copper_link_ich8lan(struct e1000_hw *hw) return ret_val; } + /* Clear link partner's EEE ability */ + hw->dev_spec.ich8lan.eee_lp_ability = 0; + if (!link) return 0; /* No link detected */ @@ -868,6 +969,7 @@ static s32 e1000_get_variants_ich8lan(struct e1000_adapter *adapter) break; case e1000_pchlan: case e1000_pch2lan: + case e1000_pch_lpt: rc = e1000_init_phy_params_pchlan(hw); break; default: @@ -1116,6 +1218,81 @@ out: e_dbg("Failed to write receive address at index %d\n", index); } +/** + * e1000_rar_set_pch_lpt - Set receive address registers + * @hw: pointer to the HW structure + * @addr: pointer to the receive address + * @index: receive address array register + * + * Sets the receive address register array at index to the address passed + * in by addr. For LPT, RAR[0] is the base address register that is to + * contain the MAC address. SHRA[0-10] are the shared receive address + * registers that are shared between the Host and manageability engine (ME). + **/ +static void e1000_rar_set_pch_lpt(struct e1000_hw *hw, u8 *addr, u32 index) +{ + u32 rar_low, rar_high; + u32 wlock_mac; + + /* + * HW expects these in little endian so we reverse the byte order + * from network order (big endian) to little endian + */ + rar_low = ((u32)addr[0] | ((u32)addr[1] << 8) | + ((u32)addr[2] << 16) | ((u32)addr[3] << 24)); + + rar_high = ((u32)addr[4] | ((u32)addr[5] << 8)); + + /* If MAC address zero, no need to set the AV bit */ + if (rar_low || rar_high) + rar_high |= E1000_RAH_AV; + + if (index == 0) { + ew32(RAL(index), rar_low); + e1e_flush(); + ew32(RAH(index), rar_high); + e1e_flush(); + return; + } + + /* + * The manageability engine (ME) can lock certain SHRAR registers that + * it is using - those registers are unavailable for use. + */ + if (index < hw->mac.rar_entry_count) { + wlock_mac = er32(FWSM) & E1000_FWSM_WLOCK_MAC_MASK; + wlock_mac >>= E1000_FWSM_WLOCK_MAC_SHIFT; + + /* Check if all SHRAR registers are locked */ + if (wlock_mac == 1) + goto out; + + if ((wlock_mac == 0) || (index <= wlock_mac)) { + s32 ret_val; + + ret_val = e1000_acquire_swflag_ich8lan(hw); + + if (ret_val) + goto out; + + ew32(SHRAL_PCH_LPT(index - 1), rar_low); + e1e_flush(); + ew32(SHRAH_PCH_LPT(index - 1), rar_high); + e1e_flush(); + + e1000_release_swflag_ich8lan(hw); + + /* verify the register updates */ + if ((er32(SHRAL_PCH_LPT(index - 1)) == rar_low) && + (er32(SHRAH_PCH_LPT(index - 1)) == rar_high)) + return; + } + } + +out: + e_dbg("Failed to write receive address at index %d\n", index); +} + /** * e1000_check_reset_block_ich8lan - Check if PHY reset is blocked * @hw: pointer to the HW structure @@ -1144,6 +1321,8 @@ static s32 e1000_write_smbus_addr(struct e1000_hw *hw) { u16 phy_data; u32 strap = er32(STRAP); + u32 freq = (strap & E1000_STRAP_SMT_FREQ_MASK) >> + E1000_STRAP_SMT_FREQ_SHIFT; s32 ret_val = 0; strap &= E1000_STRAP_SMBUS_ADDRESS_MASK; @@ -1156,6 +1335,19 @@ static s32 e1000_write_smbus_addr(struct e1000_hw *hw) phy_data |= (strap >> E1000_STRAP_SMBUS_ADDRESS_SHIFT); phy_data |= HV_SMB_ADDR_PEC_EN | HV_SMB_ADDR_VALID; + if (hw->phy.type == e1000_phy_i217) { + /* Restore SMBus frequency */ + if (freq--) { + phy_data &= ~HV_SMB_ADDR_FREQ_MASK; + phy_data |= (freq & (1 << 0)) << + HV_SMB_ADDR_FREQ_LOW_SHIFT; + phy_data |= (freq & (1 << 1)) << + (HV_SMB_ADDR_FREQ_HIGH_SHIFT - 1); + } else { + e_dbg("Unsupported SMB frequency in PHY\n"); + } + } + return e1000_write_phy_reg_hv_locked(hw, HV_SMB_ADDR, phy_data); } @@ -1193,6 +1385,7 @@ static s32 e1000_sw_lcd_config_ich8lan(struct e1000_hw *hw) /* Fall-thru */ case e1000_pchlan: case e1000_pch2lan: + case e1000_pch_lpt: sw_cfg_mask = E1000_FEXTNVM_SW_CONFIG_ICH8M; break; default: @@ -1212,10 +1405,9 @@ static s32 e1000_sw_lcd_config_ich8lan(struct e1000_hw *hw) * extended configuration before SW configuration */ data = er32(EXTCNF_CTRL); - if (!(hw->mac.type == e1000_pch2lan)) { - if (data & E1000_EXTCNF_CTRL_LCD_WRITE_ENABLE) - goto release; - } + if ((hw->mac.type < e1000_pch2lan) && + (data & E1000_EXTCNF_CTRL_LCD_WRITE_ENABLE)) + goto release; cnf_size = er32(EXTCNF_SIZE); cnf_size &= E1000_EXTCNF_SIZE_EXT_PCIE_LENGTH_MASK; @@ -1226,9 +1418,9 @@ static s32 e1000_sw_lcd_config_ich8lan(struct e1000_hw *hw) cnf_base_addr = data & E1000_EXTCNF_CTRL_EXT_CNF_POINTER_MASK; cnf_base_addr >>= E1000_EXTCNF_CTRL_EXT_CNF_POINTER_SHIFT; - if ((!(data & E1000_EXTCNF_CTRL_OEM_WRITE_ENABLE) && - (hw->mac.type == e1000_pchlan)) || - (hw->mac.type == e1000_pch2lan)) { + if (((hw->mac.type == e1000_pchlan) && + !(data & E1000_EXTCNF_CTRL_OEM_WRITE_ENABLE)) || + (hw->mac.type > e1000_pchlan)) { /* * HW configures the SMBus address and LEDs when the * OEM and LCD Write Enable bits are set in the NVM. @@ -1425,14 +1617,14 @@ static s32 e1000_oem_bits_config_ich8lan(struct e1000_hw *hw, bool d0_state) u32 mac_reg; u16 oem_reg; - if ((hw->mac.type != e1000_pch2lan) && (hw->mac.type != e1000_pchlan)) + if (hw->mac.type < e1000_pchlan) return ret_val; ret_val = hw->phy.ops.acquire(hw); if (ret_val) return ret_val; - if (!(hw->mac.type == e1000_pch2lan)) { + if (hw->mac.type == e1000_pchlan) { mac_reg = er32(EXTCNF_CTRL); if (mac_reg & E1000_EXTCNF_CTRL_OEM_WRITE_ENABLE) goto release; @@ -1629,7 +1821,7 @@ s32 e1000_lv_jumbo_workaround_ich8lan(struct e1000_hw *hw, bool enable) u32 mac_reg; u16 i; - if (hw->mac.type != e1000_pch2lan) + if (hw->mac.type < e1000_pch2lan) return 0; /* disable Rx path while enabling/disabling workaround */ @@ -1886,7 +2078,7 @@ static void e1000_gate_hw_phy_config_ich8lan(struct e1000_hw *hw, bool gate) { u32 extcnf_ctrl; - if (hw->mac.type != e1000_pch2lan) + if (hw->mac.type < e1000_pch2lan) return; extcnf_ctrl = er32(EXTCNF_CTRL); @@ -3525,6 +3717,7 @@ static s32 e1000_setup_link_ich8lan(struct e1000_hw *hw) ew32(FCTTV, hw->fc.pause_time); if ((hw->phy.type == e1000_phy_82578) || (hw->phy.type == e1000_phy_82579) || + (hw->phy.type == e1000_phy_i217) || (hw->phy.type == e1000_phy_82577)) { ew32(FCRTV_PCH, hw->fc.refresh_time); @@ -3588,6 +3781,7 @@ static s32 e1000_setup_copper_link_ich8lan(struct e1000_hw *hw) break; case e1000_phy_82577: case e1000_phy_82579: + case e1000_phy_i217: ret_val = e1000_copper_link_setup_82577(hw); if (ret_val) return ret_val; @@ -3834,14 +4028,88 @@ void e1000e_gig_downshift_workaround_ich8lan(struct e1000_hw *hw) * the LPLU setting in the NVM or custom setting. For PCH and newer parts, * the OEM bits PHY register (LED, GbE disable and LPLU configurations) also * needs to be written. + * Parts that support (and are linked to a partner which support) EEE in + * 100Mbps should disable LPLU since 100Mbps w/ EEE requires less power + * than 10Mbps w/o EEE. **/ void e1000_suspend_workarounds_ich8lan(struct e1000_hw *hw) { + struct e1000_dev_spec_ich8lan *dev_spec = &hw->dev_spec.ich8lan; u32 phy_ctrl; s32 ret_val; phy_ctrl = er32(PHY_CTRL); phy_ctrl |= E1000_PHY_CTRL_GBE_DISABLE; + if (hw->phy.type == e1000_phy_i217) { + u16 phy_reg; + + ret_val = hw->phy.ops.acquire(hw); + if (ret_val) + goto out; + + if (!dev_spec->eee_disable) { + u16 eee_advert; + + ret_val = e1e_wphy_locked(hw, I82579_EMI_ADDR, + I217_EEE_ADVERTISEMENT); + if (ret_val) + goto release; + e1e_rphy_locked(hw, I82579_EMI_DATA, &eee_advert); + + /* + * Disable LPLU if both link partners support 100BaseT + * EEE and 100Full is advertised on both ends of the + * link. + */ + if ((eee_advert & I217_EEE_100_SUPPORTED) && + (dev_spec->eee_lp_ability & + I217_EEE_100_SUPPORTED) && + (hw->phy.autoneg_advertised & ADVERTISE_100_FULL)) + phy_ctrl &= ~(E1000_PHY_CTRL_D0A_LPLU | + E1000_PHY_CTRL_NOND0A_LPLU); + } + + /* + * For i217 Intel Rapid Start Technology support, + * when the system is going into Sx and no manageability engine + * is present, the driver must configure proxy to reset only on + * power good. LPI (Low Power Idle) state must also reset only + * on power good, as well as the MTA (Multicast table array). + * The SMBus release must also be disabled on LCD reset. + */ + if (!(er32(FWSM) & E1000_ICH_FWSM_FW_VALID)) { + + /* Enable proxy to reset only on power good. */ + e1e_rphy_locked(hw, I217_PROXY_CTRL, &phy_reg); + phy_reg |= I217_PROXY_CTRL_AUTO_DISABLE; + e1e_wphy_locked(hw, I217_PROXY_CTRL, phy_reg); + + /* + * Set bit enable LPI (EEE) to reset only on + * power good. + */ + e1e_rphy_locked(hw, I217_SxCTRL, &phy_reg); + phy_reg |= I217_SxCTRL_MASK; + e1e_wphy_locked(hw, I217_SxCTRL, phy_reg); + + /* Disable the SMB release on LCD reset. */ + e1e_rphy_locked(hw, I217_MEMPWR, &phy_reg); + phy_reg &= ~I217_MEMPWR; + e1e_wphy_locked(hw, I217_MEMPWR, phy_reg); + } + + /* + * Enable MTA to reset for Intel Rapid Start Technology + * Support + */ + e1e_rphy_locked(hw, I217_CGFREG, &phy_reg); + phy_reg |= I217_CGFREG_MASK; + e1e_wphy_locked(hw, I217_CGFREG, phy_reg); + +release: + hw->phy.ops.release(hw); + } +out: ew32(PHY_CTRL, phy_ctrl); if (hw->mac.type == e1000_ich8lan) @@ -3870,6 +4138,7 @@ void e1000_suspend_workarounds_ich8lan(struct e1000_hw *hw) * on which PHY resets are not blocked, if the PHY registers cannot be * accessed properly by the s/w toggle the LANPHYPC value to power cycle * the PHY. + * On i217, setup Intel Rapid Start Technology. **/ void e1000_resume_workarounds_pchlan(struct e1000_hw *hw) { @@ -3883,6 +4152,47 @@ void e1000_resume_workarounds_pchlan(struct e1000_hw *hw) e_dbg("Failed to init PHY flow ret_val=%d\n", ret_val); return; } + + /* + * For i217 Intel Rapid Start Technology support when the system + * is transitioning from Sx and no manageability engine is present + * configure SMBus to restore on reset, disable proxy, and enable + * the reset on MTA (Multicast table array). + */ + if (hw->phy.type == e1000_phy_i217) { + u16 phy_reg; + + ret_val = hw->phy.ops.acquire(hw); + if (ret_val) { + e_dbg("Failed to setup iRST\n"); + return; + } + + if (!(er32(FWSM) & E1000_ICH_FWSM_FW_VALID)) { + /* + * Restore clear on SMB if no manageability engine + * is present + */ + ret_val = e1e_rphy_locked(hw, I217_MEMPWR, &phy_reg); + if (ret_val) + goto release; + phy_reg |= I217_MEMPWR_MASK; + e1e_wphy_locked(hw, I217_MEMPWR, phy_reg); + + /* Disable Proxy */ + e1e_wphy_locked(hw, I217_PROXY_CTRL, 0); + } + /* Enable reset on MTA */ + ret_val = e1e_rphy_locked(hw, I217_CGFREG, &phy_reg); + if (ret_val) + goto release; + phy_reg &= ~I217_CGFREG_MASK; + e1e_wphy_locked(hw, I217_CGFREG, phy_reg); +release: + if (ret_val) + e_dbg("Error %d in resume workarounds\n", ret_val); + hw->phy.ops.release(hw); + } } /** @@ -4123,6 +4433,7 @@ static void e1000_clear_hw_cntrs_ich8lan(struct e1000_hw *hw) /* Clear PHY statistics registers */ if ((hw->phy.type == e1000_phy_82578) || (hw->phy.type == e1000_phy_82579) || + (hw->phy.type == e1000_phy_i217) || (hw->phy.type == e1000_phy_82577)) { ret_val = hw->phy.ops.acquire(hw); if (ret_val) @@ -4282,3 +4593,22 @@ const struct e1000_info e1000_pch2_info = { .phy_ops = &ich8_phy_ops, .nvm_ops = &ich8_nvm_ops, }; + +const struct e1000_info e1000_pch_lpt_info = { + .mac = e1000_pch_lpt, + .flags = FLAG_IS_ICH + | FLAG_HAS_WOL + | FLAG_HAS_CTRLEXT_ON_LOAD + | FLAG_HAS_AMT + | FLAG_HAS_FLASH + | FLAG_HAS_JUMBO_FRAMES + | FLAG_APME_IN_WUC, + .flags2 = FLAG2_HAS_PHY_STATS + | FLAG2_HAS_EEE, + .pba = 26, + .max_hw_frame_size = DEFAULT_JUMBO, + .get_variants = e1000_get_variants_ich8lan, + .mac_ops = &ich8_mac_ops, + .phy_ops = &ich8_phy_ops, + .nvm_ops = &ich8_nvm_ops, +}; diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c index c19784c31819..b53ea83fda29 100644 --- a/drivers/net/ethernet/intel/e1000e/netdev.c +++ b/drivers/net/ethernet/intel/e1000e/netdev.c @@ -79,6 +79,7 @@ static const struct e1000_info *e1000_info_tbl[] = { [board_ich10lan] = &e1000_ich10_info, [board_pchlan] = &e1000_pch_info, [board_pch2lan] = &e1000_pch2_info, + [board_pch_lpt] = &e1000_pch_lpt_info, }; struct e1000_reg_info { @@ -2863,8 +2864,8 @@ static void e1000_setup_rctl(struct e1000_adapter *adapter) u32 rctl, rfctl; u32 pages = 0; - /* Workaround Si errata on 82579 - configure jumbo frame flow */ - if (hw->mac.type == e1000_pch2lan) { + /* Workaround Si errata on PCHx - configure jumbo frame flow */ + if (hw->mac.type >= e1000_pch2lan) { s32 ret_val; if (adapter->netdev->mtu > ETH_DATA_LEN) @@ -3487,6 +3488,7 @@ void e1000e_reset(struct e1000_adapter *adapter) fc->refresh_time = 0x1000; break; case e1000_pch2lan: + case e1000_pch_lpt: fc->high_water = 0x05C20; fc->low_water = 0x05048; fc->pause_time = 0x0650; @@ -5264,11 +5266,11 @@ static int e1000_change_mtu(struct net_device *netdev, int new_mtu) return -EINVAL; } - /* Jumbo frame workaround on 82579 requires CRC be stripped */ - if ((adapter->hw.mac.type == e1000_pch2lan) && + /* Jumbo frame workaround on 82579 and newer requires CRC be stripped */ + if ((adapter->hw.mac.type >= e1000_pch2lan) && !(adapter->flags2 & FLAG2_CRC_STRIPPING) && (new_mtu > ETH_DATA_LEN)) { - e_err("Jumbo Frames not supported on 82579 when CRC stripping is disabled.\n"); + e_err("Jumbo Frames not supported on this device when CRC stripping is disabled.\n"); return -EINVAL; } @@ -5665,7 +5667,7 @@ static int __e1000_resume(struct pci_dev *pdev) return err; } - if (hw->mac.type == e1000_pch2lan) + if (hw->mac.type >= e1000_pch2lan) e1000_resume_workarounds_pchlan(&adapter->hw); e1000e_power_up_phy(adapter); @@ -6564,6 +6566,9 @@ static DEFINE_PCI_DEVICE_TABLE(e1000_pci_tbl) = { { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH2_LV_LM), board_pch2lan }, { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH2_LV_V), board_pch2lan }, + { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_LPT_I217_LM), board_pch_lpt }, + { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_LPT_I217_V), board_pch_lpt }, + { 0, 0, 0, 0, 0, 0, 0 } /* terminate list */ }; MODULE_DEVICE_TABLE(pci, e1000_pci_tbl); diff --git a/drivers/net/ethernet/intel/e1000e/phy.c b/drivers/net/ethernet/intel/e1000e/phy.c index ad22b8c8abd2..ada7133078e5 100644 --- a/drivers/net/ethernet/intel/e1000e/phy.c +++ b/drivers/net/ethernet/intel/e1000e/phy.c @@ -2335,6 +2335,9 @@ enum e1000_phy_type e1000e_get_phy_type_from_id(u32 phy_id) case I82579_E_PHY_ID: phy_type = e1000_phy_82579; break; + case I217_E_PHY_ID: + phy_type = e1000_phy_i217; + break; default: phy_type = e1000_phy_unknown; break; -- 2.20.1