From 2fb0e84909392e2a2ff6d57b36597a2c0f17a81b Mon Sep 17 00:00:00 2001 From: H Hartley Sweeten Date: Tue, 26 Mar 2013 14:58:08 -0700 Subject: [PATCH] staging: comedi: rtd520: use plx register map from plx9080.h Use the register map defines for the PLX9080 found in plx9080.h instead of the custom named defines in rtd520.h. Signed-off-by: H Hartley Sweeten Reviewed-by: Ian Abbott Signed-off-by: Greg Kroah-Hartman --- drivers/staging/comedi/drivers/rtd520.c | 8 ++++---- drivers/staging/comedi/drivers/rtd520.h | 19 ------------------- 2 files changed, 4 insertions(+), 23 deletions(-) diff --git a/drivers/staging/comedi/drivers/rtd520.c b/drivers/staging/comedi/drivers/rtd520.c index b1d888eb61f..c5ef79e1c5a 100644 --- a/drivers/staging/comedi/drivers/rtd520.c +++ b/drivers/staging/comedi/drivers/rtd520.c @@ -1210,7 +1210,7 @@ static void rtd_reset(struct comedi_device *dev) writel(0, devpriv->las0 + LAS0_BOARD_RESET); udelay(100); /* needed? */ - writel(0, devpriv->lcfg + LCFG_ITCSR); + writel(0, devpriv->lcfg + PLX_INTRCS_REG); devpriv->intMask = 0; writew(devpriv->intMask, devpriv->las0 + LAS0_IT); devpriv->intClearMask = ~0; @@ -1362,7 +1362,7 @@ static int rtd_auto_attach(struct comedi_device *dev, devpriv->fifoLen = ret; if (dev->irq) - writel(ICS_PIE | ICS_PLIE, devpriv->lcfg + LCFG_ITCSR); + writel(ICS_PIE | ICS_PLIE, devpriv->lcfg + PLX_INTRCS_REG); dev_info(dev->class_dev, "%s attached\n", dev->board_name); @@ -1378,9 +1378,9 @@ static void rtd_detach(struct comedi_device *dev) if (devpriv->las0 && devpriv->lcfg) rtd_reset(dev); if (dev->irq) { - writel(readl(devpriv->lcfg + LCFG_ITCSR) & + writel(readl(devpriv->lcfg + PLX_INTRCS_REG) & ~(ICS_PLIE | ICS_DMA0_E | ICS_DMA1_E), - devpriv->lcfg + LCFG_ITCSR); + devpriv->lcfg + PLX_INTRCS_REG); free_irq(dev->irq, dev); } if (devpriv->las0) diff --git a/drivers/staging/comedi/drivers/rtd520.h b/drivers/staging/comedi/drivers/rtd520.h index 25188a58145..bfb34378dcd 100644 --- a/drivers/staging/comedi/drivers/rtd520.h +++ b/drivers/staging/comedi/drivers/rtd520.h @@ -113,25 +113,6 @@ #define LAS1_DAC1_FIFO 0x0008 /* D/A1 FIFO (16bit) */ #define LAS1_DAC2_FIFO 0x000c /* D/A2 FIFO (16bit) */ -/* - * PLX 9080 local config & runtime registers - */ -#define LCFG_ITCSR 0x0068 /* Interrupt Control/Status */ -#define LCFG_DMAMODE0 0x0080 /* DMA0 Mode */ -#define LCFG_DMAPADR0 0x0084 /* DMA0 PCI Address */ -#define LCFG_DMALADR0 0x0088 /* DMA0 Local Address */ -#define LCFG_DMASIZ0 0x008c /* DMA0 Transfer Size (Bytes) */ -#define LCFG_DMADPR0 0x0090 /* DMA0 Descriptor Pointer */ -#define LCFG_DMAMODE1 0x0094 /* DMA1 Mode */ -#define LCFG_DMAPADR1 0x0098 /* DMA1 PCI Address */ -#define LCFG_DMALADR1 0x009c /* DMA1 Local Address */ -#define LCFG_DMASIZ1 0x00a0 /* DMA1 Transfer Size (Bytes) */ -#define LCFG_DMADPR1 0x00a4 /* DMA1 Descriptor Pointer */ -#define LCFG_DMACSR0 0x00a8 /* DMA0 Command/Status */ -#define LCFG_DMACSR1 0x00a9 /* DMA0 Command/Status */ -#define LCFG_DMAARB 0x00ac /* DMA Arbitration */ -#define LCFG_DMATHR 0x00b0 /* DMA Threshold */ - /* FIFO Status Word Bits (RtdFifoStatus) */ #define FS_DAC1_NOT_EMPTY (1 << 0) /* DAC1 FIFO not empty */ #define FS_DAC1_HEMPTY (1 << 1) /* DAC1 FIFO half empty */ -- 2.20.1